Servers :: Cannot Connect To Main Computer
Sep 6, 2012
My computer at work crashed so I had to reinstall windows 7.When it was working properly I was able to connect to our main server computer. After the reinstall I am able to connect to the internet however I am unable to connect main server computer. Usually, before it crashed, the server would automatically show up in the networks folder. Now all I can see it my computer and not the server computer.If someone knows how I can get my computer connecting to the main server I have tried everything and nothing is working.The main server computer it Windows XP and my computer is Windows 7.
View 4 Replies
ADVERTISEMENT
Aug 1, 2012
main computer will not connect to internet but laptop does
View 1 Replies
View Related
Jun 27, 2011
I have a desktop computer which is connected to the router by cable, but when this computer is on I can't connect to the wireless network with any other devices.When I turn the main computer off though I can connect fine with any wireless device.
View 3 Replies
View Related
Jan 4, 2012
Put bluntly, my laptop will not connect to any ftp site/server via any of the following methods:Command Line Software FTP Clients (Filezilla and other such programs) Windows Explorer (window) Browsers
However, if I try to use a WEB-BASED client, I am able to connect without a problem. What's stranger, if I try to connect to the same server on a different computer using the same wireless network (I'm running on Wifi), that computer has not problem connecting to the FTP server via all the methods mentioned above. So that should at least eliminate the wireless network itself from the list of possibilities.
And to the best of my knowledge it has nothing to do with the firewall as I've made every possible setting tweak to allow ftp connection in and out - I've even turned off the firewall and antivirus with no luck.
Which is why I have reason to believe it has to do with my laptop itself.
View 2 Replies
View Related
Jun 19, 2011
how to connect a adsl modem to a computer network using a switch with a server.I have a network with a server and about ten clients computers all connected through a switch, the server has an IP 192.168.1.1 as its gateway. I want to connect adsl modem to the switch so that all the computers can have access to the net, but the adsl too has 192.168.1.1 as its IP.
View 1 Replies
View Related
Jun 6, 2011
i replaced a lightning damaged Linksys router in my home network with the RT-N56U. My main computer is Win7 64, (Phenom II quad, asus M490GTD) , my wife's computer(wired connection, Dell P5Duo) and my work laptop (wireless connection HP core I5) are XP. I have a USB printer attached to the wife's computer and two wireless Squeezebox receivers. This network worked with the old router. With the new router i can access internet from all computers, and connect to the new network with the Squeezeboxes. I cannot print from the main computer, even though the printer shows up in the devices window and the test page spools.
View 4 Replies
View Related
Jun 13, 2011
I have at last got the wireless router today and set it up. A few teething problems but I have the internet and so does my wife now. And, I have my computer back! The new wireless router is a D-Link DSL-2740R. There are two things I can't get sorted out, I put admin into the user name and I can't seem to find a way to change the user name
I managed to get the laptop (WinVista 32bit my comp is Win764bit) seeing the media from my computer but not other files and printer. I had previously set up a user under 'share' to enable the link between the computers and using the old Belkin it worked fine. Alas that is not the case and want it to get the sharing going. The 'Share' user is still setup and I could not see it, or I have forgotten how to access it?
View 2 Replies
View Related
Apr 28, 2011
I have 2 computers (one is using windows 7, other is using windows xp), one switch and router. I don't have physical access to router. I have plugged the cable from router to switch, and connected both PC's to switch and now I have internet on both PC's.My question is, can I "control" or share files on windows xp with Windows 7 (main computer) and in same time have access to internet? Or to use windows 7 to connect to internet?
View 5 Replies
View Related
Jun 13, 2012
My Main computer (which has a wired connection to router) internet is running so slow, i mean so slow that i cannot even do a speed test, it keeps failing, im continuously getting server timed out messages when browsing, and to watch a youtube video of 1 minute long it will take about 5 - 10 minutes to stream it before i can watch it. However despite the above the two laptops and ipad work great, i have a braodband speed of around 16megs. Now here is everything i have done so far. After calling my ISP to se if it was their fault, which it turned out not to be, they got me to change all the DNS and IP settings to manual, they gave me all the numbers to put in. Again that did not work so i used namebench to find the quickest DNS servers for me, that didnt work ethier so i just reverted all settings back to automatic as they were before.
View 13 Replies
View Related
Jan 16, 2012
I got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost don't work at all with cable, even if i turn off the wireless network, the speed is about 2-3 mbit in and about 6-7 mbit out All other computers, tv. printer wireless work very fine.
View 2 Replies
View Related
Sep 20, 2012
My home network is all Windows 7 computers (4 total), and are Ultimates except for my laptop, which is Home Pro. So that's 3 computers with Ultimate and 1 with home pro. I have one computer (also Win 7 Ult.) that's my primary computer, the other 2 computers are mostly HTPC computers that I have set up to stream from my main computer.I do know how to set up Home groups for sharing files, but I could only set it up that there would be full access to the shares or no access at all. [For simplicity: My primary computer will be PC-1, the 2 HTPC's will be PC-2 and PC-3, and my laptop PC-4.]PC-1 will host all the files I want access to. PC-2 and PC-3 will access my music and videos folders for streaming. PC-4 which is my own personal laptop will have full access to shared folders that I DO NOT want being able to be accessed on PC-2 and PC-3.I have tried many and various types of ways to deny access from PC-2 and PC-3, where PC-4 would be allowed access to on my PC-1, but every time it's either all PC's get access or NO access to the shared folders. I also want to keep all my user accounts as admins.
View 2 Replies
View Related
Apr 16, 2011
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies
View Related
Mar 22, 2011
I have four Laptops,and also have SMCWBR14S-N4(SOHO) Wireless Routers. The issue is if i connect to my main Laptop all the other laptops gets disconnected. I have checked the mac filtering, reset the Router & reconfigured with new wireless settings still the issue persist. If i connect the Laptop to the modem main Laptop works fine.
View 4 Replies
View Related
Feb 9, 2011
A couple days ago my administrator account stopped being able to connect internet via wireless or Ethernet however my other accounts can still access it. I went to find a restore point but they have all been deleted. I'm not sure if it is a virus or something else.
View 5 Replies
View Related
Apr 12, 2011
I have a network where I have two wireless routers wired to a third (main) router. I want to connect a third wireless (Linksys WRT 54GL) to the main router,but I want to connect wirelessly (without any cables). I have tried to bridge it,ie disabling DHCP and assigning a static IP address which is in the same range as the main router but still if i connect my laptop using the third router I cant log onto the internet and worst still I cant ping the main router. The main router is the one that is connected to the proxy server. My connections are as follows,from the wireless antenna the cable goes to the proxy server's wan port,the main wireless router is linked to the server's lan port.My server's LAN ip is 192.168.0.1 and the main wireless router is 192.168.0.2 I have two other routers which are wired to this main wireless router and their local IP addresses are 192.168.0.4 and 192.168.0.5 respectively. I want to connect a third wireless router to the main router but this time without using a cable. What i have done so far is I have assigned it the IP address 192.168.0.6 and I have disabled DHCP,all the other settings I have put the same as the main wireless router.
View 2 Replies
View Related
Dec 6, 2010
We have been unable to connect our PSPs to the new E2000, and after several hours we're ready to throw in the towel and go get a different router!The PSPs only see the "guest" connection when using the scan option, but cannot connect to it. Even after manually adding both the main and the guest info we are STILL unable to connect either of the PSPs We had an older router from your company which we had no issues connecting 6 desktops, a lappy, 2 psp, 2 ds, 2 xbox 360, and a Wii, as well as our smart phones. After this recent "upgrade" to the E2000 the PSPs CANNOT connect no matter what we do. It gives many different error messages.
View 9 Replies
View Related
Jun 19, 2012
I have two computers. In my first computer Linux operating system its a domain controller and in my second computer server 2003 operating system. In server 2003 I have my oracle database back end. The problem is that oracle is two slow and users are very disturbed it means I have installed front end of oracle in my clients users of domain. Now I am facing the issue of slow down of oracle. It will take a long time to perform a little activity. I have already gave heat and Greece to its processor, but it doesn't work. What should I do?
View 1 Replies
View Related
Jan 3, 2013
trying to setup universal wifi extender. Lights indicate system is on and connected to my computer. however wps and link rate lights are not on.
View 1 Replies
View Related
Jun 22, 2012
I have two server computers. there IP addresses are:
1. 192.168.0.99
2. 192.168.1.99
Now, how to configure it for accessing data from each other?
View 7 Replies
View Related
Sep 22, 2012
Hard Drive (Gembird not detected on My PC
View 3 Replies
View Related
Nov 2, 2011
i have configure Webserver IIS on windows server 2008 i can access it on same computer i configure it but i can't access it on another computer
View 2 Replies
View Related
May 18, 2012
I have been told to connect our branch offices over outdoor point-to-point wireless CPE. The wireless brand is Orthogon. The Main office got cisco 4507 L3 switch where all building switches terminate. DHCP,DNS and all application are hosted in main office. The branch office got ONE 24 port POE Switch cisco 2960 where all users will be connected, On Port 0/24 of 2960 switch at branch will terminate the outdoor Wireless and other end will be terminated on 4/15 of 4507 at main office? what command I need at both interface where Wireless is terminated.when we connect floor switches to 4507 we got these commands on access switches
vtp mode client
vtp version 2
vtp password cisco1
vtp domain LIC
Fiber termination port configuration - switchport mode trunk
View 3 Replies
View Related
Nov 17, 2011
I am connected but always have the red cross up in the connection tray
View 1 Replies
View Related
Jul 29, 2011
my computer losses its internet connection when it goes to sleep and I have to reboot my computer. Could my network card be faulty.
View 1 Replies
View Related
Feb 8, 2012
i have an internet connection thru USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible.
View 1 Replies
View Related
Jul 7, 2011
One of the computers at my office died and needs to be replaced. I need to get the new computer set up with an existing user account so that the user can access email and public drives. The new computer is running windows 7 professional.Our server is running SBS 2008.
View 5 Replies
View Related
Apr 2, 2012
your computer could not be joined to the domain because the following error has occured,access denied,this error is happening when i create users for active directory users and computers in windows server 2003,i have 11 computers ,,1 server and 10 clients,,i created 10 users in active directory users and computers ,,until here i have no problem,,but when i want join client computers with server it is happening this error(your computer could not be joined to the domain because the following error has occurred,access denied)i can join 3 client computer with the server in fourth computer it happening that error,what can i do?
View 9 Replies
View Related
Apr 25, 2011
Disable Prompt for password when computer resumesfrom standby for win 2003 serverunder
View 1 Replies
View Related
Apr 12, 2011
I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies
View Related
Feb 13, 2012
I'm having an issue with my work computer where it can connect to all of the servers in the company accross the country EXCEPT the servers located in New Jersey. I am running Windows XP SP3. I am able to ping the servers and get a response back, but my network drives are disconnected and I cannot open them. I have tried completely uninstalling the driver for my network adapter and reinstalling it with no affect. Mine is the only computer having this problem and I have uninstalled all software that was installed within the past month to be sure. It is ALL of the servers in New Jersey so I know it's a problem with my computer and not the serers. I had a similar issue a while ago where I could ping Google, but could not get to the website, and that ended up being the ZoneAlarm firewall that I had. That was fixed by uninstalling ZoneAlarm and doing an ipconfig /release & /renew. I re-registered some dlls but that didnt work either.
View 1 Replies
View Related
Jan 16, 2013
I'm having a problem connecting to multiple servers. I do know that I have stopped the windows firewall and taken out Norton and avg, yet I still can't connect to any servers. I've even tried on other networks! I can download torrents and surf the internet just fine though. I can't connect to an online class server to do my homework, and I've also tried to start playing WOW but neither will connect. I also don't see peer guardian 2 in *services*
View 7 Replies
View Related
Apr 10, 2013
I currently cannot connect to any game servers or sync my internet time or anything of the sort. I also cannot seem to P2P.
View 3 Replies
View Related
May 28, 2012
I have an issue here, I need to connect to various anonymus proxy servers, the ip's of which can be freely found on the web. I've tried doing this from a broadband connected computer and it's ok, but the thing is that when I try doing this from a computer that is tied to o router, it doesn't work at all.
View 3 Replies
View Related
