I have four Laptops,and also have SMCWBR14S-N4(SOHO) Wireless Routers. The issue is if i connect to my main Laptop all the other laptops gets disconnected. I have checked the mac filtering, reset the Router & reconfigured with new wireless settings still the issue persist. If i connect the Laptop to the modem main Laptop works fine.
View 4 RepliesI have at last got the wireless router today and set it up. A few teething problems but I have the internet and so does my wife now. And, I have my computer back! The new wireless router is a D-Link DSL-2740R. There are two things I can't get sorted out, I put admin into the user name and I can't seem to find a way to change the user name
I managed to get the laptop (WinVista 32bit my comp is Win764bit) seeing the media from my computer but not other files and printer. I had previously set up a user under 'share' to enable the link between the computers and using the old Belkin it worked fine. Alas that is not the case and want it to get the sharing going. The 'Share' user is still setup and I could not see it, or I have forgotten how to access it?
Having problems with my wife's laptop. It is connected to our wireless home network - but every so often (and it seems to be happening with increasing frequency), the connection breaks right in the middle of whatever she is doing. The laptop has to be restarted in order to reestablish the internet connection.
This problem has happened at other people's houses when we were connected to their wireless - so the issue appears to be with the laptop and not with the setup of our wireless network.
I have a Toshiba laptop (p-750) and a new TP-link TL-WR1043ND router.The router works fine with my smartphone and Sony PlayStation but my laptop is getting disconnected all the time.
View 1 Replies View RelatedMy laptop gets disconnected frequently from internet although other laptop is working fine means its a issues with my laptop driver.I am not able to access the default gateway 192.168.1.1,Destination host unreachable same message when I tried with 209.183.226.152, not able to ping goggle.com also.
[code
If I have the wired cable plugged in to my laptop1 the wireless connection works fine. If I disconnect that wired cable then the wireless connection disconnects as well. I can watch this happening when I have the connection dialogs open showing the connection wizard dialogs.The other computers and printer work as expected without disconnects..I also have three other computers including another laptop connected to a switch and router.Here is the connection schematic:
Key to symbols:
>>>> wireless
------ wired
computer1 xp ---------switch1G--------router1------cable modem1
computer2 Vista---------switch1G-------router1
laptop1 Win7 >>>>>>>>>>>>>>>>>router1
[code]....
I have a laptop - Lenovo E43 in which i tried to connect with wifi, when wireless nework connection is opened, it is showing No wireless networks were found in range. and when IPCONFIGured, Media state...:Media disconnected is displaying under the Ethernet adapter Wireless Network connection.
View 1 Replies View RelatedMy computer at work crashed so I had to reinstall windows 7.When it was working properly I was able to connect to our main server computer. After the reinstall I am able to connect to the internet however I am unable to connect main server computer. Usually, before it crashed, the server would automatically show up in the networks folder. Now all I can see it my computer and not the server computer.If someone knows how I can get my computer connecting to the main server I have tried everything and nothing is working.The main server computer it Windows XP and my computer is Windows 7.
View 4 Replies View RelatedA couple days ago my administrator account stopped being able to connect internet via wireless or Ethernet however my other accounts can still access it. I went to find a restore point but they have all been deleted. I'm not sure if it is a virus or something else.
View 5 Replies View RelatedI have a Dell Inspiron Laptop with Windows 7 and a PC with XP. The Laptop has Dell Wireless 1397 WLAN mini-card, i think it supports 802.11g. My PC has DLINK DWA 525 PCI WIRELESS card, this supports 802.11g and n. The wireless router is Belkin Surf Wireless Router (F7D2301zb).
Now, the problem i'm facing is when PC is connected first and later when laptop is connected, the computer gets disconnected. Laptop works fine. I have to restart the router to connect both.
Is it due to the difference in 802.11 G and N of Laptop and PC ?
main computer will not connect to internet but laptop does
View 1 Replies View RelatedI have a desktop computer which is connected to the router by cable, but when this computer is on I can't connect to the wireless network with any other devices.When I turn the main computer off though I can connect fine with any wireless device.
View 3 Replies View RelatedI have a network where I have two wireless routers wired to a third (main) router. I want to connect a third wireless (Linksys WRT 54GL) to the main router,but I want to connect wirelessly (without any cables). I have tried to bridge it,ie disabling DHCP and assigning a static IP address which is in the same range as the main router but still if i connect my laptop using the third router I cant log onto the internet and worst still I cant ping the main router. The main router is the one that is connected to the proxy server. My connections are as follows,from the wireless antenna the cable goes to the proxy server's wan port,the main wireless router is linked to the server's lan port.My server's LAN ip is 192.168.0.1 and the main wireless router is 192.168.0.2 I have two other routers which are wired to this main wireless router and their local IP addresses are 192.168.0.4 and 192.168.0.5 respectively. I want to connect a third wireless router to the main router but this time without using a cable. What i have done so far is I have assigned it the IP address 192.168.0.6 and I have disabled DHCP,all the other settings I have put the same as the main wireless router.
View 2 Replies View RelatedWe have been unable to connect our PSPs to the new E2000, and after several hours we're ready to throw in the towel and go get a different router!The PSPs only see the "guest" connection when using the scan option, but cannot connect to it. Even after manually adding both the main and the guest info we are STILL unable to connect either of the PSPs We had an older router from your company which we had no issues connecting 6 desktops, a lappy, 2 psp, 2 ds, 2 xbox 360, and a Wii, as well as our smart phones. After this recent "upgrade" to the E2000 the PSPs CANNOT connect no matter what we do. It gives many different error messages.
View 9 Replies View Relatedtrying to setup universal wifi extender. Lights indicate system is on and connected to my computer. however wps and link rate lights are not on.
View 1 Replies View RelatedI have been told to connect our branch offices over outdoor point-to-point wireless CPE. The wireless brand is Orthogon. The Main office got cisco 4507 L3 switch where all building switches terminate. DHCP,DNS and all application are hosted in main office. The branch office got ONE 24 port POE Switch cisco 2960 where all users will be connected, On Port 0/24 of 2960 switch at branch will terminate the outdoor Wireless and other end will be terminated on 4/15 of 4507 at main office? what command I need at both interface where Wireless is terminated.when we connect floor switches to 4507 we got these commands on access switches
vtp mode client
vtp version 2
vtp password cisco1
vtp domain LIC
Fiber termination port configuration - switchport mode trunk
I am seeing the following once I run the cmd.
Tunnel adapter Local Area Connection* 11
Media State . . . . . . Media disconnected
Connection-specific DNS Suffix
I cannot connect to the internet.
I have searched so many threads concerning the problem I am having but have yet to find anything that works.On Sunday my husband changed our router. We have just moved from Sky to Talk Talk. Before the change, my wireless connection was absolutely fine.Now, everything else in the house is working on wireless fine (xBox, my smartphone, hubby's PC) except for my crappy Lenovo N 500 (XP SP3).Here is a copy/paste from my ipconfig /all:[CODE]
View 19 Replies View RelatedSo earlier today I purchased a new video card, a PNY Nvidia Gtx 560. After installing the drivers through the disc, I ended up getting he BSOD, and my PC just kept on restarting automatically. I fixed that problem, and found out that I should install the drivers for it through their website instead. So, after restarting my PC yet again, I tried using the Internet (Chrome) and found out that I have no Internet connection. Now, I am writing this on my iPad using the same router and modem that my PC is supposed to be using, but I keep on checking my WLAN adapter and it says that it is Not Connected. Now I have tried every forum, every post, EVERYTHING related to this problem and not a single thing fixes it. Also, when I do the ipconfig, everything says Media Disconnected and that's it. PS, I tried unplugging/plugging back in my modem and router PPS, Is it possible that when installing my new gcard and psu that I may have messed up with something internally?
View 14 Replies View RelatedI have external hard drive connected to E3000. It is formatted as NTFS and working fine. However if I disconnect from router and connect to PC usb port directly, I get a message that hard drive needs to be formatted.
View 2 Replies View RelatedMy broadband works fine on my laptop but my Wi-Fi will not connect,it keep on saying "not connected"
View 3 Replies View Relatedwould you explain the main differences between lms 3.2 and 4.2 cause my company is about to purchase the new version;
- how does it changed in taking reports ?
- how does it changed and improved in monitoring?
Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the internet i use an Ethernet cable which is directly connected to my main PC my windows is also window XP and my modem model is TG782T only if my PC is turned off the wireless works
View 2 Replies View RelatedWhenever my main PC is turned on, i get no [COLOR=blue !important][COLOR=blue !important]signal[/COLOR][/COLOR] from the wireless, like i cannot use my phone or laptop on the internet i use an ethernet cable which is direclty connected to my main PC my windows is also window XP and my modem model is TG782T only if my pc is turned off the wireless works
View 17 Replies View RelatedWhenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the interneti use an [COLOR=blue !important][COLOR=blue !important]ethernet[/COLOR][/COLOR] cable which is direclty connected to my main PCmy windows is also window XP and my modem model is TG782T
View 2 Replies View Relatedi replaced a lightning damaged Linksys router in my home network with the RT-N56U. My main computer is Win7 64, (Phenom II quad, asus M490GTD) , my wife's computer(wired connection, Dell P5Duo) and my work laptop (wireless connection HP core I5) are XP. I have a USB printer attached to the wife's computer and two wireless Squeezebox receivers. This network worked with the old router. With the new router i can access internet from all computers, and connect to the new network with the Squeezeboxes. I cannot print from the main computer, even though the printer shows up in the devices window and the test page spools.
View 4 Replies View Relatedtell me the reasons that could cause the decreasing of the bandwidth in the TP cables? just 3 or 4 (main) reasons.
View 4 Replies View RelatedWe have wireless in the house, the router, etc is down in the basement where my office is. Is there any way to increase the strength to the main level of the house? Our house is standard size, but it seems to weaken upstairs.
View 4 Replies View RelatedI currently have a BT Home Hub 3 router and an Ubiquiti Power AP N. What I am trying to do is use the Ubiquiti access point as the main device for all connections in my house (ethernet and wireless) so that I can use the QoS settings etc. I basically want the Home Hub router to play as little role as possible in the network except for providing the ADSL internet connection. How would I be able to do this?I know I need to enable DHCP on the access point but everytime I do so the devices connected to the access point lose internet connection.(BTW I have an ethernet cable connected from one of the routers LAN ports into the access point's WAN port)
View 3 Replies View RelatedI just recently got back from a 2 day vacation to find that my internet on my desktop is almost unusable. I can get onto some websites and load videos, but it takes hours. I use Skype quite a bit, and I play online games. It is literally impossible to do either without my internet disconnecting.I use a 2wire Router i3812V with AT&T U-Verse. Here are my specs:[CODE]
View 1 Replies View RelatedIv got an "old" dir 655 laying around as my secondary router and found out it had an USB slot for share port.In another room of the house Iv got a media center and an Usb printer. Can I use this dir 655 as a wireless bridge from my main router, so the media center and the printer can be connected? So both low level streaming and shared printer with share port.Or do you need to be connected directly to the dir 655 to use the usb and share port?
View 11 Replies View RelatedI am a employed at a credit union with 17 branches. We have a mpls circuit connecting the branches to our main office. I setup DSL as a backup connection. I have 17 RV042 Cisco VPN Routers. I created a secure vpn tunnel for every branch to the main office. I made a delayed route in our main router to fail over to the VPN, in case the mpls failed. Almost everything works great except our ATM's are required to connect to a router at our main office to a different subnet than the tunnel is connecting, therefore not routing through the tunnel. I've tried creating another tunnel but only works with one of the branches, cause I get a conflict at the main office when I try a second tunnel with the same ip network. Also I tried routing all the traffic through the vpn by putting in the address 0.0.0.0 subnet 0.0.0.0, at the branch site. But I can only do that for one branch, The Downtown Cisco won’t let me create another tunnel with that setting.
View 1 Replies View RelatedI have a problem with my SIP trunk config. I can receive calls, but unfortunately I cannot dial. I found out why, and it is because I have one main registered number from TISP, and I am trying to dial with the phone number from the block. That is why I am receiving unauthorized messages when I enable debug ccsip messages. I called TISP and they said that I should always use main number and to send my number via P-Asserted id. or via P-Preferred Id. how to configure this ? I found only this conf.
Commands:
dial-peer voice tag
viace-class sip asserted-id pai or ppi
I tried with this but it didn't work. I don't know where to say what I need to insert , and instead of what .