Wireless :: How To Connect Third Linksys WRT 54GL To Main Router
Apr 12, 2011
I have a network where I have two wireless routers wired to a third (main) router. I want to connect a third wireless (Linksys WRT 54GL) to the main router,but I want to connect wirelessly (without any cables). I have tried to bridge it,ie disabling DHCP and assigning a static IP address which is in the same range as the main router but still if i connect my laptop using the third router I cant log onto the internet and worst still I cant ping the main router. The main router is the one that is connected to the proxy server. My connections are as follows,from the wireless antenna the cable goes to the proxy server's wan port,the main wireless router is linked to the server's lan port.My server's LAN ip is 192.168.0.1 and the main wireless router is 192.168.0.2 I have two other routers which are wired to this main wireless router and their local IP addresses are 192.168.0.4 and 192.168.0.5 respectively. I want to connect a third wireless router to the main router but this time without using a cable. What i have done so far is I have assigned it the IP address 192.168.0.6 and I have disabled DHCP,all the other settings I have put the same as the main wireless router.
View 2 Replies
ADVERTISEMENT
Aug 4, 2011
I finally added wpa personnel security to my network. It worked on all computers until my sons xbox wouldn't connect so I disconnected the modem and router and reconnected. After this, the main computer at the router worked but 3 other laptops wouldn't connect to the network. I finally realized it wasn't broadcasting the ssid.All are working except I have an order computer running xp that previously worked-I hadn't checked it for a week-Ibut I just checked and it doesn't connect to the network. It finds the signal and I put the password in but it won't connect. I've deleted the connection and added it back with no luck.
View 1 Replies
View Related
Dec 6, 2010
We have been unable to connect our PSPs to the new E2000, and after several hours we're ready to throw in the towel and go get a different router!The PSPs only see the "guest" connection when using the scan option, but cannot connect to it. Even after manually adding both the main and the guest info we are STILL unable to connect either of the PSPs We had an older router from your company which we had no issues connecting 6 desktops, a lappy, 2 psp, 2 ds, 2 xbox 360, and a Wii, as well as our smart phones. After this recent "upgrade" to the E2000 the PSPs CANNOT connect no matter what we do. It gives many different error messages.
View 9 Replies
View Related
Aug 30, 2007
My question is regarding gaining access to my Linksys wireless router configuration page. I recently turned my Linksys WRT54GL wireless router into an access point and since I have done so I am no longer able to access the configuration page for my router.
The problem that I am encountering is not one of connectivity, but rather entry. Prior to turning my wireless router into an access point I was able to connect to the router by means of my browser (192.168.1.1). I am still able to connect to the router, but whenever I type in a user name and password the router just simply does not recognize the information. I have tried resetting the router multiple times, but I am still denied access to my router despite having the correct user name and password. I have version 1.1 of the Linksys WRT54GL wireless router and have the latest firmware.
View 9 Replies
View Related
Jan 16, 2012
I got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost don't work at all with cable, even if i turn off the wireless network, the speed is about 2-3 mbit in and about 6-7 mbit out All other computers, tv. printer wireless work very fine.
View 2 Replies
View Related
Jun 21, 2011
Currently I have a Buffalo WHR-HP-G54 wireless router running tomato 1.28. The router sits in the basement in the front corner of the house. The signal is actually very good from the basement, but only on the side of the house where the router is sitting.
Is it possible to add a second router to extend the wireless? I would want to have the second router connected via Cat6 instead of wireless. I would probably go with a WRT54GL.
View 5 Replies
View Related
Jan 3, 2013
trying to setup universal wifi extender. Lights indicate system is on and connected to my computer. however wps and link rate lights are not on.
View 1 Replies
View Related
Jun 27, 2011
I have a desktop computer which is connected to the router by cable, but when this computer is on I can't connect to the wireless network with any other devices.When I turn the main computer off though I can connect fine with any wireless device.
View 3 Replies
View Related
May 18, 2012
I have been told to connect our branch offices over outdoor point-to-point wireless CPE. The wireless brand is Orthogon. The Main office got cisco 4507 L3 switch where all building switches terminate. DHCP,DNS and all application are hosted in main office. The branch office got ONE 24 port POE Switch cisco 2960 where all users will be connected, On Port 0/24 of 2960 switch at branch will terminate the outdoor Wireless and other end will be terminated on 4/15 of 4507 at main office? what command I need at both interface where Wireless is terminated.when we connect floor switches to 4507 we got these commands on access switches
vtp mode client
vtp version 2
vtp password cisco1
vtp domain LIC
Fiber termination port configuration - switchport mode trunk
View 3 Replies
View Related
Aug 2, 2011
We have used two Cisco RVS4000 to create the IPSec VPN between the main office and the branch office. The main office has SBS 2008. There is a Windows Server 2008 as the domain controller in the branch office. One branch office user has a laptop which is not in the domain, but his exchange account is set up in the Outlook. When he connects the laptop to the branch office network, he cannot connect to the exchange server and get the emails. Is there any configuration to set up in the router, server or Outlook?
View 1 Replies
View Related
Jun 22, 2012
I have a Linksys E1000 running on the latest firmware available from the Cisco website. When my main PC (Windows 7 64Bit SP1) which is connected with a ethernet cable is running the wireless speed is great for all my connected devices. (Android/Apple phones, tablets, family PC, etc). But when I shut down my main PC the wireless speed drops to the point where it can take 3-5 mins for google.com to load up. The wireless connection is still showing as strong, just the speed isn't there anymore. If I were to turn my PC back on, everything will load up almost instantly and be back to normal. I've tried reinstalling the router, resetting it all back to default settings and re configuring it but I've had no luck in solving this.
View 2 Replies
View Related
Jun 27, 2012
Iv got an "old" dir 655 laying around as my secondary router and found out it had an USB slot for share port.In another room of the house Iv got a media center and an Usb printer. Can I use this dir 655 as a wireless bridge from my main router, so the media center and the printer can be connected? So both low level streaming and shared printer with share port.Or do you need to be connected directly to the dir 655 to use the usb and share port?
View 11 Replies
View Related
Sep 6, 2012
My computer at work crashed so I had to reinstall windows 7.When it was working properly I was able to connect to our main server computer. After the reinstall I am able to connect to the internet however I am unable to connect main server computer. Usually, before it crashed, the server would automatically show up in the networks folder. Now all I can see it my computer and not the server computer.If someone knows how I can get my computer connecting to the main server I have tried everything and nothing is working.The main server computer it Windows XP and my computer is Windows 7.
View 4 Replies
View Related
Mar 22, 2011
I have four Laptops,and also have SMCWBR14S-N4(SOHO) Wireless Routers. The issue is if i connect to my main Laptop all the other laptops gets disconnected. I have checked the mac filtering, reset the Router & reconfigured with new wireless settings still the issue persist. If i connect the Laptop to the modem main Laptop works fine.
View 4 Replies
View Related
Feb 9, 2011
A couple days ago my administrator account stopped being able to connect internet via wireless or Ethernet however my other accounts can still access it. I went to find a restore point but they have all been deleted. I'm not sure if it is a virus or something else.
View 5 Replies
View Related
Jul 7, 2012
I have a wireless audio system using several Apple Airport Express boxes currently communicating using 802.11g through my Verizon FiOS MI424WR (Actiontec) router. I also have wireless security cameras and several laptops on the same connection. I occasionally have audio dropouts I suspect due to wireless bandwidth limitations. I have a Netgear WNR3500 Wireless-N Gigabit router that I would like to hang off of the Verizon router and move the Airport Expresses, which are 802.11N capable, to its Wi-fi connection. This would keep my audio streams separate from the video and other wireless traffic and take advantage of the 802.11N.I in configuring the router/s to facilitate this arrangement. I have numerous Windows machines (XP and Windows 7), mostly hardwired, on my main network along with a NAS containing my audio library. So all devices need to be able to see all other devices.
View 3 Replies
View Related
Aug 1, 2012
main computer will not connect to internet but laptop does
View 1 Replies
View Related
Dec 11, 2012
The 740N I got is pretty old now so I have another router and I want to use 740N as a bridge to extend my main router's wireless service. The main router has Mac Filtering enabled and I've entered the 740N's Mac address into the main router. I have switched off 740N's DHCP, changed it's IP etc. I can connect to 740N but 740N is not connecting to the main router. I've tried the same thing at my office where the main router is a 8961ND and I successfully bridged and connected the 740N but it's not working at my home.
View 5 Replies
View Related
Jun 9, 2012
I thing to buy one of these two products linksys wag120n and the links wag160n and i want to know which the main differences between of these two products.
View 6 Replies
View Related
Jan 20, 2012
Linksys x2000.Is it possible to use ADSL port as a main internet connection and to use WAN port as a backup internet connection?
View 1 Replies
View Related
Sep 10, 2012
I have about 4 different devices accessing the same network, which lags my pc gaming severely. I was wondering if there is a way to set my IP to the main priority. I am using a Westell 7500 router.
View 1 Replies
View Related
Oct 8, 2012
After reading a bit about interVLAN routing got a doubt regarding how trunking takes place at router and at switch.In case of switch we configure a port interface as trunk port and say all vlan's are allowed here but in case of router we configure sub interface as trunk saying particular vlan belongs to particular subinterface .Can't we configure only a single port interface on router just like Switch and say all vlan's are allowed here on this interface ,why to go for sub interfaces?
View 2 Replies
View Related
Jan 16, 2012
Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the internet i use an Ethernet cable which is directly connected to my main PC my windows is also window XP and my modem model is TG782T only if my PC is turned off the wireless works
View 2 Replies
View Related
Jan 16, 2012
Whenever my main PC is turned on, i get no [COLOR=blue !important][COLOR=blue !important]signal[/COLOR][/COLOR] from the wireless, like i cannot use my phone or laptop on the internet i use an ethernet cable which is direclty connected to my main PC my windows is also window XP and my modem model is TG782T only if my pc is turned off the wireless works
View 17 Replies
View Related
Jan 16, 2012
Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the interneti use an [COLOR=blue !important][COLOR=blue !important]ethernet[/COLOR][/COLOR] cable which is direclty connected to my main PCmy windows is also window XP and my modem model is TG782T
View 2 Replies
View Related
Jul 29, 2012
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies
View Related
Feb 24, 2011
Ive had this 655 for about a year now and it has been rock solid. But, there has been one slight issue.
And and all wireless devices can see each other and all wired devices can see each other....but the wired cant see the wireless and vis versa.
The wireless devices (W7 and Vista laptops) can see the wired devices when they are plugged in. But my phone and Galaxy Tab can only see whatever wireless devices there are (cant be plugged in). Even my wired Samsung TV cant see the shares on the Tab or wireless laptops (and vis versa). So, its certainly not a firewall or OS config issue.
Now, I made sure they are all connecting via the main SSID and not the "isolated" Guest SSID....but its acting like the main SSID is isolated from the wired LAN somehow.
Firmware 1.34. IPs for the wired and wireless devices are all in the 1.2 - 1.50 range.
View 14 Replies
View Related
Feb 3, 2011
it's across 3 floors and the current setup is a single wireless router DIR655 (1st floor), but the WiFi suffers greatly on the floor below/above.
I have sourced 3x D link switches and 2x more DIR655's and would like to have all machines/consoles/phones etc in the household on the same network. Is it possible to keep one DIR655 as the main wireless connection and have the other as pure AP's as well as keeping the same SSID?
View 1 Replies
View Related
Feb 24, 2013
I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
View 1 Replies
View Related
Jan 9, 2013
We have a Windows server based network (15 wired computers) and four wireless devices (more to come)We are using a CISCO SA520W appliance in the main building as the perimeter Internet gateway / firewall / wireless access. It all works well.We have a second building too far away for wireless devices to reach the SA520W radio in the main building.The second building is connected via fiber to the main building (switch to switch). Several wired computers are connected to the switch in the second building.We want to provide seamless wireless connectivity as wireless device users move between buildings.
We thought to mount and connect another simple B/G capable wireless access point, via ethernet wire, to the switch in the second building. But we're not sure of the best CISCO/Linksys model to choose for this. The choice should work well with the SA520W configuration and be relatively simple to configure in that environment.We're also unsure of the steps to configure a seamless wireless experience for the roving wireless device users.
View 11 Replies
View Related
Feb 25, 2011
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies
View Related
Jan 17, 2012
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
View 2 Replies
View Related
Dec 25, 2012
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies
View Related
