Netgear WNR3500 - How To Setup Second Wireless Router Off Main One
Jul 7, 2012
I have a wireless audio system using several Apple Airport Express boxes currently communicating using 802.11g through my Verizon FiOS MI424WR (Actiontec) router. I also have wireless security cameras and several laptops on the same connection. I occasionally have audio dropouts I suspect due to wireless bandwidth limitations. I have a Netgear WNR3500 Wireless-N Gigabit router that I would like to hang off of the Verizon router and move the Airport Expresses, which are 802.11N capable, to its Wi-fi connection. This would keep my audio streams separate from the video and other wireless traffic and take advantage of the 802.11N.I in configuring the router/s to facilitate this arrangement. I have numerous Windows machines (XP and Windows 7), mostly hardwired, on my main network along with a NAS containing my audio library. So all devices need to be able to see all other devices.
I got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost don't work at all with cable, even if i turn off the wireless network, the speed is about 2-3 mbit in and about 6-7 mbit out All other computers, tv. printer wireless work very fine.
i wanted to know if i could setup a netgear wireless router to my ethernet cable that is coming out of the wall. is it as easy as plugging the cable coming out of the wall into the internet port on the router?
I just joined this company and they already ad a VPN to one of their partners that provides them access to some resources. We have now added a 2nd location but the partner wouldnt allow a 2nd VPN tunnel so the decision was made to give the new location a ASA5505 to tunnel thru the main office to access the resources at the partners site.Using ASDM i believe i was able to setup the tunnel to the main office but there is no resource there to use. Now i'm stuck and i do not know what to do to get to the partner site
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
How do I setup Netgear WNR2000v2 wireless router as a wireless access point? I just upgraded to a Netgear WNDR3700 wireless router and I don't wanted the wnr2000 to go waste. So basically as the followings:
I've been noticing some inconsistencies and weird behavior in my home wifi setup. I'm starting to suspect some kind of serious security issue.Periodically, the router (netgear wnr3500) will become unresponsive and not allow anyone to connect, requiring a reboot of the router. I assumed this was typical death by summer heat.
Recently, I've started noticing that my laptop is connecting to a similarly named wireless network that's unsecured. So, if my ssid is "bobsmith" this would be identified in windows as "bobsmith 2". I thought this was a windows bug, but I suspect windows is automatically connecting to a name and not a sensible unique identifier, despite it being aware that "bobsmith 2" is different so as to rename it.
Today, I was wrestling with my wireless bridge and determined that it wasn't connecting to anything. Refreshing the available ssids, it found "bobsmith 2" (unsecured) instead of "bobsmith" (wpa) - which it is set to connect to.
I am having netgear JNR 1010 wifi router and I use Cablenet. the wire which carries internet is directly connected to my Desktop pc's LAN port without modem.Is there any way to install this router without conecting to modem?
internet provided to whole building with connections in every room -> personal router in my room -> my PCs, Macs & printer, how to set up my computers so that they can share files with each other and print to my network printer, but without being susceptible to being accessed from other computers in the building? I have my own netgear router. But at the moment, my shared folders are accessible by everyone in the building, so is my printer If I set all the computers to automatically set ip by DHCP, they can access the net, but everyone in the building can access them (and my printer which requires a manual ip doesnt work). If I set all the computers to manual addresses (e.g. 192.168.1.14 ... 192.168.1.15 ... 192.168.1.16 etc.) they work with each other, the printer works, its secure, but I can't access the internet!Is there a way to for example have my own internal network with manual ip addresses, while also being able to connect to the net?
Iv got an "old" dir 655 laying around as my secondary router and found out it had an USB slot for share port.In another room of the house Iv got a media center and an Usb printer. Can I use this dir 655 as a wireless bridge from my main router, so the media center and the printer can be connected? So both low level streaming and shared printer with share port.Or do you need to be connected directly to the dir 655 to use the usb and share port?
I have a Netgear wnr3500 for my home network. I have certain sites blocked from inside it, for instance.I even blocked it by exact url. Still gets through then blocked yahoo.com and it was immediately Netgear blocked.It seems this site is fooling my router.
ok so i finally got a decent dsl modem, from our isp it is also a wired/wireless router, i have Netgear WNR2000, that is conencted a lan port on the dsl router/modem, how do i set it up as an acces point so i can access the ip range of the dsl modem/router?
WNR's ip range : is the 192.168.1.x Dsl modems's is: 10.0.0.x
I need to connect a computer which right now is at 192.168.1.x to my domain controller which is at 10.0.0.x..
I have a network where I have two wireless routers wired to a third (main) router. I want to connect a third wireless (Linksys WRT 54GL) to the main router,but I want to connect wirelessly (without any cables). I have tried to bridge it,ie disabling DHCP and assigning a static IP address which is in the same range as the main router but still if i connect my laptop using the third router I cant log onto the internet and worst still I cant ping the main router. The main router is the one that is connected to the proxy server. My connections are as follows,from the wireless antenna the cable goes to the proxy server's wan port,the main wireless router is linked to the server's lan port.My server's LAN ip is 192.168.0.1 and the main wireless router is 192.168.0.2 I have two other routers which are wired to this main wireless router and their local IP addresses are 192.168.0.4 and 192.168.0.5 respectively. I want to connect a third wireless router to the main router but this time without using a cable. What i have done so far is I have assigned it the IP address 192.168.0.6 and I have disabled DHCP,all the other settings I have put the same as the main wireless router.
Just got my router running and when I connected to it via my laptop, it didn't ask for a password and it says unsecured connection when I put my mouse over it. Where do I go in the settings? I do not see it at all?
Currently, I have 2 Apple Airport Extremes, and 1 Wireless Netgear ADSL Router. The 2 AAEs are connected separately to the router, and this allows us to get coverage in most part of the house (it's a large house with concrete and granite walls). I also have a HP Officejet 8500 'wireless printer' that is wired to the router as you can only print to the printer when it's in standby with a physical connection to the router (that's a different story). So my goal is to replace everything as the router is slowly dying and as a result of this, I want to be able to access the Internet wirelessly throughout the house, and be able to print from any where in the house without anything connected via cables. And as a bonus, I would like the Internet to be accessible 100 yards/metres down the garden (workshop is there). Basically, blanket coverage!
We have been unable to connect our PSPs to the new E2000, and after several hours we're ready to throw in the towel and go get a different router!The PSPs only see the "guest" connection when using the scan option, but cannot connect to it. Even after manually adding both the main and the guest info we are STILL unable to connect either of the PSPs We had an older router from your company which we had no issues connecting 6 desktops, a lappy, 2 psp, 2 ds, 2 xbox 360, and a Wii, as well as our smart phones. After this recent "upgrade" to the E2000 the PSPs CANNOT connect no matter what we do. It gives many different error messages.
The 740N I got is pretty old now so I have another router and I want to use 740N as a bridge to extend my main router's wireless service. The main router has Mac Filtering enabled and I've entered the 740N's Mac address into the main router. I have switched off 740N's DHCP, changed it's IP etc. I can connect to 740N but 740N is not connecting to the main router. I've tried the same thing at my office where the main router is a 8961ND and I successfully bridged and connected the 740N but it's not working at my home.
I'm trying to find out if it's possible to setup a 3600HGV (VDSL Gateway) as modem only and have a Netgear DGN3500 (ADSL2+) as a wireless access point. I'm aware that both are DSL modems, my reasoning for wanting to have them both hooked up is that
a) the 3600HGV has no Gigabit switch and runs on wireless G
b) the DGN 3500 has a Gigabit switch and does wireless N. So in a nutshell I want the 3600 as simple modem and the 3500 as a wireless N access point with Gigabit switch.
I have a actiontec Wireless N ADSL Modem/Router Model# GT784WN & netgear n600 wndr3400v2 router that I would like to setup as a Wireless Repeater. I can not seem to get the netgear n600 setup.
I have about 4 different devices accessing the same network, which lags my pc gaming severely. I was wondering if there is a way to set my IP to the main priority. I am using a Westell 7500 router.
After reading a bit about interVLAN routing got a doubt regarding how trunking takes place at router and at switch.In case of switch we configure a port interface as trunk port and say all vlan's are allowed here but in case of router we configure sub interface as trunk saying particular vlan belongs to particular subinterface .Can't we configure only a single port interface on router just like Switch and say all vlan's are allowed here on this interface ,why to go for sub interfaces?
Looking for the most efficient setup of my home network. I recently bought the netgear 3700 and it has been great. I also have a trendnet green 8 port giga switch. Both of these will be located in my equipment closet.
I also have an ooma voip hub. before i did the router upgrade i had modem>ooma hub>router. Mainly had it that way since the previous router was a wrg614 and i thought the hub probably had better qos routing. I now have the 3700 infront since i think it does that. I need to learn how to setup the qos though. Problem is that having the hub after the router loses one of my 11 ports (i have pleanty now).
Will speed through the switch be as fast as straight from the router? should my netflix devices connect directly to the router or does any of this matter. [code]
