ok so i finally got a decent dsl modem, from our isp it is also a wired/wireless router, i have Netgear WNR2000, that is conencted a lan port on the dsl router/modem, how do i set it up as an acces point so i can access the ip range of the dsl modem/router?
WNR's ip range : is the 192.168.1.x
Dsl modems's is: 10.0.0.x
I need to connect a computer which right now is at 192.168.1.x to my domain controller which is at 10.0.0.x..
I have two routers. One is Netgear WG602 v3 and Netgear WNR2000. WG602 v3 is connected with internet. I want to make a wireless bridge. How?
View 1 Replies View RelatedI just installed DD-WRT, version DD-WRT v24-sp2 (03/18/12) std, in a Netgear router model # WNR-2000V3 and so far everything is running good except for the LAN ports which are not working. I don't know what settings I have to change to get it working and I tried a lot of options from the DD-WRT site. I want this router to be an access point but it seems like I can't use the LAN ports at all whatsoever. Could it be that this firmware is no good? If so, is there a way to revert back to the factory NetGear firmware?
View 3 Replies View RelatedI'm trying to use a Netgear WNR2000 router as a repeater, I have a Netgear WGR614v9 as the main router in my house. I have followed online guides as closely as possible but am still having troubles. My main router is working fine, everything can connect to it and gain access to internet despite having to change the security to WEP to allow for the repeater function to work. Now I am having troubles getting the repeater (WNR2000) to connect to my main router. The ip address of the repeater is listed in the connected devices of the main router and everything is managing to 'find' the repeater just fine but when I connect and put in the WEP key there is no internet connection. I read that a static ip address is needed or something like that but I am completely baffled
View 1 Replies View RelatedSo here's the setup, my apartment is right next to my parents' house (don't ask why) and they have a netgear WNR2000 router in their upstairs loft connected to a modem going to a local internet provider. My apartment is just far away enough so that I can barely get a signal, so I'm trying to set up a second wireless router (netgear WNR1000v2) in my apartment that will connect to the internet through the first router so I can get a better signal. I do have a way of running an Ethernet cable from the first router to the second in my apartment.
View 3 Replies View RelatedNetgear wnr2000 download driver
View 1 Replies View RelatedI have a Motorola SBG901 router/gateway that is hooked to my desktop. I recently purchased a Netgear WNR2000 to use as a router to connect to a Blue-Ray player to receive firmware updates wirelessly. On every attempt to access the netgear unit to set it up as a repeater, I get nowhere. I tried hooking the unit up to my laptop and login in under the admin account but again to no avail. I really don't want to have to disconnect the SBG901.
View 9 Replies View Relatedok I have logged in my router & clicked the repeater mode. whats the next step. BTW I am a complete newby to networking.
View 4 Replies View RelatedI have a similar problem to thread with same name dated 31-Jul-2010-that is now closed. I'm using Qwest internet with Actiontec PK5000, and I have to use my Netgear WNR2000v3 as a repeater.The Netgear is working as a repeater however I can't get internet through the LAN connections on the repeater. After checking the settings over and over again I'm beginning to think the repeater will only work with wifi. I need to hook up my desktop in the office, DirectTV, and Blueray player LAN connections to my repeater.
View 1 Replies View RelatedHow do I personalize the settings on my router from default. Netgear wnr2000.
View 2 Replies View RelatedOur ISP provided a DSL modem/router (Netopia) that I connected to the Netgear wireless router with dd-wrt flashed. All I've done so far is connected the two. I have a connection, but I want to know if it's possible or advisable to configure everything from the Netgear router. But following the instructions here[URL], it seems I have to configure DNS and such using the Netopia router. I don't have a full grasp on how to use them together the correct way - like using the Netopia as an ethernet bridge.
View 4 Replies View RelatedToday a bought a brand new Netgear WNR2000 router.Upon setup the wifi was working correctly. All of the lights where active and it seemed everything was in order.Because the power cord was in the way I moved it and plugged it into a different powerpoint. From then onwards my router has not been working. Only three of seven lights are active (green).
I have tried unplugging and replugging all network cords. I have also turned it on and back off, reset the router and run the initial installation program thrice.What should I do now? Nothing so far has effected it. The computer I am installing it on is running Windows XP and the laptop I intend to use the wifi on is Windows 7.
Here is my setup:
Netgear WNR2000 router.
Macbook Pro with Snow Leopard connected to router through wireless.
Windows 7 Desktop getting internet through the MBP ethernet.
I can't figure out how to be a part of my "Home Network" with my Win7 Machine so I can see other computers in my house, use my networked printers, etc. I can only see the MBP it is connected to in network panel. I want to be able to stream the movies on this computer to my iPad which is connected to the wireless router.
I replaced a Netgear router with a similar Netgear router, but the LAN is no longer working.The old Netgear router would drop internet, but LAN would work. Replaced it, the new Netgear router works fine with the internet (cable modem), but the LAN with two computers will not work. The desktop with Windows XP, and a laptop with Windows 7. After runing network setups on both computers several times, I have been unable to reestablish the LAN, however internet access via the router is working. Reinstalled the old router and the LAN works fine, allowing file and printer sharing. Old router is a Netgear WGR614v2, new router is a Netgear WNR2000how to reconfigure the router/computers to get the LAN working again with new router.
View 8 Replies View Relatedhow do i setup a password for a netgear wireless router?
View 2 Replies View Relateddo i need to go to my control panal to connet to use it wireless
View 2 Replies View RelatedJust got my router running and when I connected to it via my laptop, it didn't ask for a password and it says unsecured connection when I put my mouse over it. Where do I go in the settings? I do not see it at all?
View 3 Replies View RelatedWhat in needed to setup wireless for an kindle fire pad? I have a netgear router
View 3 Replies View Relatedi wanted to know if i could setup a netgear wireless router to my ethernet cable that is coming out of the wall. is it as easy as plugging the cable coming out of the wall into the internet port on the router?
View 5 Replies View RelatedMy brother has a router for his house which lives right next door. I am getting wireless through a adapter right now but not good throughout my house.
View 1 Replies View RelatedI have a wireless audio system using several Apple Airport Express boxes currently communicating using 802.11g through my Verizon FiOS MI424WR (Actiontec) router. I also have wireless security cameras and several laptops on the same connection. I occasionally have audio dropouts I suspect due to wireless bandwidth limitations. I have a Netgear WNR3500 Wireless-N Gigabit router that I would like to hang off of the Verizon router and move the Airport Expresses, which are 802.11N capable, to its Wi-fi connection. This would keep my audio streams separate from the video and other wireless traffic and take advantage of the 802.11N.I in configuring the router/s to facilitate this arrangement. I have numerous Windows machines (XP and Windows 7), mostly hardwired, on my main network along with a NAS containing my audio library. So all devices need to be able to see all other devices.
View 3 Replies View RelatedI have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies View RelatedHow do I setup Netgear WNR2000v2 wireless router as a wireless access point? I just upgraded to a Netgear WNDR3700 wireless router and I don't wanted the wnr2000 to go waste. So basically as the followings:
Internet(modem)---Ethernet cable--->3700---wireless-->2000---Ethernet cable-->Xbox360/PS3.
I'm trying to find out if it's possible to setup a 3600HGV (VDSL Gateway) as modem only and have a Netgear DGN3500 (ADSL2+) as a wireless access point. I'm aware that both are DSL modems, my reasoning for wanting to have them both hooked up is that
a) the 3600HGV has no Gigabit switch and runs on wireless G
b) the DGN 3500 has a Gigabit switch and does wireless N. So in a nutshell I want the 3600 as simple modem and the 3500 as a wireless N access point with Gigabit switch.
I confused ,with which modem to purchase to set up my n600 wireless dual band gigabit router wndr3700, i'm on boardband with no modem
View 1 Replies View RelatedI have a actiontec Wireless N ADSL Modem/Router Model# GT784WN & netgear n600 wndr3400v2 router that I would like to setup as a Wireless Repeater. I can not seem to get the netgear n600 setup.
View 1 Replies View RelatedWhere can I find the setup and drivers for the Netgear WPN111 wireless internet adapter.
View 1 Replies View Relatedunable to find download for netgear wpn824 v2 router
View 1 Replies View RelatedI bought the Netgear N300 WNR2000v2 today for my laptop (ACER Aspire 5552). Installation was fine but when in try to connect to the router i get a message "Windows was unable to connect to 'SSID Name'. However when i go into routerlogin.net and change the security options to 'None' i get connected to the internet no problem.
View 4 Replies View RelatedI need to setup my Netgear as a switch/access point. I need the following set-up. My ipconfig /all reports:
View 27 Replies View RelatedLooking for the most efficient setup of my home network. I recently bought the netgear 3700 and it has been great. I also have a trendnet green 8 port giga switch. Both of these will be located in my equipment closet.
I also have an ooma voip hub. before i did the router upgrade i had modem>ooma hub>router. Mainly had it that way since the previous router was a wrg614 and i thought the hub probably had better qos routing. I now have the 3700 infront since i think it does that. I need to learn how to setup the qos though. Problem is that having the hub after the router loses one of my 11 ports (i have pleanty now).
Will speed through the switch be as fast as straight from the router? should my netflix devices connect directly to the router or does any of this matter. [code]
I have two routers set up. It goes from the modem through a WRT54G2 to a WNR2000. I have one pc connected to the WRT54G2 that gets 20Mbps and another connected to the WNR2000 thats only getting 5Mbps. I realized recently I have them connected to each other wrong. Or so I assume. I have the fourth port on the WRT54G2 connected to the internet port on the WNR2000 and it's set to "Automatic Configuration - DHCP" and "DHCP Server" is enabled. From what I read one or both of those is supposed to be set to manual.
View 2 Replies View RelatedI am having netgear JNR 1010 wifi router and I use Cablenet. the wire which carries internet is directly connected to my Desktop pc's LAN port without modem.Is there any way to install this router without conecting to modem?
View 3 Replies View Related