Netgear WNR2000 - Change Default Settings?
Jun 1, 2011How do I personalize the settings on my router from default. Netgear wnr2000.
View 2 Replies
ADVERTISEMENT
NetGear WNR2000 V3 DD WRT LAN Not Working?
Jan 14, 2013I just installed DD-WRT, version DD-WRT v24-sp2 (03/18/12) std, in a Netgear router model # WNR-2000V3 and so far everything is running good except for the LAN ports which are not working. I don't know what settings I have to change to get it working and I tried a lot of options from the DD-WRT site. I want this router to be an access point but it seems like I can't use the LAN ports at all whatsoever. Could it be that this firmware is no good? If so, is there a way to revert back to the factory NetGear firmware?
View 3 Replies View RelatedUse Netgear WNR2000 Router As Repeater?
Jun 29, 2012I'm trying to use a Netgear WNR2000 router as a repeater, I have a Netgear WGR614v9 as the main router in my house. I have followed online guides as closely as possible but am still having troubles. My main router is working fine, everything can connect to it and gain access to internet despite having to change the security to WEP to allow for the repeater function to work. Now I am having troubles getting the repeater (WNR2000) to connect to my main router. The ip address of the repeater is listed in the connected devices of the main router and everything is managing to 'find' the repeater just fine but when I connect and put in the WEP key there is no internet connection. I read that a static ip address is needed or something like that but I am completely baffled
View 1 Replies View RelatedWNR2000 - 2 Netgear Routers To One Modem?
Jun 9, 2011So here's the setup, my apartment is right next to my parents' house (don't ask why) and they have a netgear WNR2000 router in their upstairs loft connected to a modem going to a local internet provider. My apartment is just far away enough so that I can barely get a signal, so I'm trying to set up a second wireless router (netgear WNR1000v2) in my apartment that will connect to the internet through the first router so I can get a better signal. I do have a way of running an Ethernet cable from the first router to the second in my apartment.
View 3 Replies View RelatedNetgear Wnr2000 Download Driver?
Apr 27, 2012Netgear wnr2000 download driver
View 1 Replies View RelatedNetgear WNR2000 - New Wireless Setup
Feb 6, 2011ok so i finally got a decent dsl modem, from our isp it is also a wired/wireless router, i have Netgear WNR2000, that is conencted a lan port on the dsl router/modem, how do i set it up as an acces point so i can access the ip range of the dsl modem/router?
WNR's ip range : is the 192.168.1.x
Dsl modems's is: 10.0.0.x
I need to connect a computer which right now is at 192.168.1.x to my domain controller which is at 10.0.0.x..
Netgear WNR2000 As Repeater With Motorola SBG901?
Feb 17, 2011I have a Motorola SBG901 router/gateway that is hooked to my desktop. I recently purchased a Netgear WNR2000 to use as a router to connect to a Blue-Ray player to receive firmware updates wirelessly. On every attempt to access the netgear unit to set it up as a repeater, I get nowhere. I tried hooking the unit up to my laptop and login in under the admin account but again to no avail. I really don't want to have to disconnect the SBG901.
View 9 Replies View RelatedSetting Up Netgear WNR2000 Router As A Repeater
Jul 22, 2011ok I have logged in my router & clicked the repeater mode. whats the next step. BTW I am a complete newby to networking.
View 4 Replies View RelatedSetting Up Netgear WNR2000 Router As A Repeater?
Jul 4, 2011I have a similar problem to thread with same name dated 31-Jul-2010-that is now closed. I'm using Qwest internet with Actiontec PK5000, and I have to use my Netgear WNR2000v3 as a repeater.The Netgear is working as a repeater however I can't get internet through the LAN connections on the repeater. After checking the settings over and over again I'm beginning to think the repeater will only work with wifi. I need to hook up my desktop in the office, DirectTV, and Blueray player LAN connections to my repeater.
View 1 Replies View RelatedNetgear WNR2000 Router Behind Netopia 2241N Configuration
May 25, 2012Our ISP provided a DSL modem/router (Netopia) that I connected to the Netgear wireless router with dd-wrt flashed. All I've done so far is connected the two. I have a connection, but I want to know if it's possible or advisable to configure everything from the Netgear router. But following the instructions here[URL], it seems I have to configure DNS and such using the Netopia router. I don't have a full grasp on how to use them together the correct way - like using the Netopia as an ethernet bridge.
View 4 Replies View RelatedNetgear WG602 V3 And WNR2000 Routers Wireless Bridge
Aug 9, 2011I have two routers. One is Netgear WG602 v3 and Netgear WNR2000. WG602 v3 is connected with internet. I want to make a wireless bridge. How?
View 1 Replies View RelatedNetgear WNR2000 / Router Is Not Working - Only Three Of Seven Lights Are Active?
May 23, 2012Today a bought a brand new Netgear WNR2000 router.Upon setup the wifi was working correctly. All of the lights where active and it seemed everything was in order.Because the power cord was in the way I moved it and plugged it into a different powerpoint. From then onwards my router has not been working. Only three of seven lights are active (green).
I have tried unplugging and replugging all network cords. I have also turned it on and back off, reset the router and run the initial installation program thrice.What should I do now? Nothing so far has effected it. The computer I am installing it on is running Windows XP and the laptop I intend to use the wifi on is Windows 7.
Netgear WNR2000 Router / Network Access Through ICS Gateway?
Sep 29, 2012Here is my setup:
Netgear WNR2000 router.
Macbook Pro with Snow Leopard connected to router through wireless.
Windows 7 Desktop getting internet through the MBP ethernet.
I can't figure out how to be a part of my "Home Network" with my Win7 Machine so I can see other computers in my house, use my networked printers, etc. I can only see the MBP it is connected to in network panel. I want to be able to stream the movies on this computer to my iPad which is connected to the wireless router.
LAN Will Not Work With Replacement Router (Netgear WNR2000) / Internet Access OK
Dec 5, 2011I replaced a Netgear router with a similar Netgear router, but the LAN is no longer working.The old Netgear router would drop internet, but LAN would work. Replaced it, the new Netgear router works fine with the internet (cable modem), but the LAN with two computers will not work. The desktop with Windows XP, and a laptop with Windows 7. After runing network setups on both computers several times, I have been unable to reestablish the LAN, however internet access via the router is working. Reinstalled the old router and the LAN works fine, allowing file and printer sharing. Old router is a Netgear WGR614v2, new router is a Netgear WNR2000how to reconfigure the router/computers to get the LAN working again with new router.
View 8 Replies View RelatedD-Link DIR-825 :: Magically Reverts To Default Settings
Dec 19, 2011What would cause my Dir-825 to magically revert to it's default settings? This is the 4th time this has happened.We rely on a Verizon Network Extender for phone service. It requires an internet connection to function. When the router brain-farts, we don't have phone service... and we don't know it until we try to call out, or try to use the internet. We went to bed last night with the router working and woke up to it not working. It's just my wife and I here. I haven't seen the dog showing any interest in jacking with our computer gear.
When I access the setup utility and go to Manual Wireless Network Setup, the Wireless Network Name has defaulted to dlink, and Security Mode is None. I have to re-enter my personalized setup info, (because that is what our computers are looking for), then all works fine again.I'm a savy XP user, my wife has Vista (yuk) (she doesn't know any better; her daughter installed it).We are Comcast customers. We own a Linksys CM-100 modem. (When I connect direct by hardwire, (i.e. bypass the Dir-825 router), from the modem to any computer, or the Verizon Network Extender, they function just fine. Setup utility for Dir-825 says we have Hardware Version B-1; Firmware Version 2.02NA.
Set Firewall settings to Endpoint Independent for TCP and UDP. I see other posts addressing similar issues of reversion to default settings... but there don't seem to be any clear resolutions of these issues. On 2010-03-11, gunrunnerjohn posted, "I think there may be a shadow file that's actually in the FLASH that needs to get written back to make the changes stick. I seem to recall there is a command to sync the RAMDISK copies to the FLASH." Yet there is no more to this thread.
Cisco AAA/Identity/Nac :: ACS 5.1 Default Settings Required
Oct 5, 2011Does the following setting is a shipping default in the ACS 5.1?,In the Access Policies ->Network Device Admin -> Identity -> Advanced Options, the If user not found was set to “Continue” .
View 6 Replies View RelatedSharing :: Printers Switching Default Settings Automatic?
Mar 17, 2011First time on this forum: I have a client running a Windows 2008 server, Windows 7 OS. We set the default printer as the server file cabinet printer, however, between logging off in the evening and back on in the morning the default printer switches to his local printer
View 2 Replies View RelatedD-Link DIR-601 :: Upgrading Firmware From 1.0 To 1.02 Will It Default Factory Settings?
Aug 6, 2011I currently have this router in use with verizon dsl (PPPoe) setup.I have this set to "always on". Since the verizon modem, which is also router has been set into bridge mode and the d-link came into play its been extremely slow, and dropping connection. The router is in a separate IP class, and has no conflict with the modem. My question is, if I upgrade this firmware from 1.0 to 1.02 will it default to factory settings? I know it says only some will. I do have the backup config file, but i would be doing this remotely, and would not be able to get to this router if it goes down. Has anyone gone from 1.0 to 1.2 and saw a difference and speed, and are you able to do this without losing settings.
View 3 Replies View RelatedCisco Switches :: How To Set SG200-08P To Factory Default Settings
Oct 18, 2011We need to "reset" a SG200-08P switch back to the factory default settings and noted the "Quick Start Guide" implies the "Reset" button next to the power button doesn't exist and refers the user to the "Cisco Small Business Smart Switch Administration Guide" for instructions. We couldn't find any information related to a "factory reset" in that document either. Pressed the "paper clip button" on the switch but we still can't get in.
View 7 Replies View RelatedCisco Application :: To Restore The Default Settings Ace 4710
May 22, 2013the ACE 4710 is running 3.2.5 and I need to put it in another environment.Is there a way to reset its settings?
View 3 Replies View RelatedCisco Routers :: WRVS4400N Resetting Itself To Default Settings?
Feb 20, 2012I have 2 WRVS4400N routers that were installed at 2 remote locations to provide VPN access to these sites. The routers have been found reset to the factory defaults on three occasions, twice on one of them and once on the other. Both sites are unmanned so no-one is on site to have pressed the reset button, and both routers were set to have remote management disabled. They are running v2013 firmware.
View 3 Replies View RelatedCisco Switching/Routing :: 6509 LAN Is Set Up With Default VTP Settings
Dec 2, 2012my LAN is set up with default VTP settings
-core switch cisco 6509 vtp server
-access switches 2960 vtp server
-no vtp domain set on any switches
-no vtp password set
untill now i manually set the vlans on switches (didnt see anything automatic created on switches)is there any danger with the above settings , that a switch with domain name set and higher revision numberwill delete my vlan settings? if yes how can i protect/disable vtp in my LAN
Cisco Routers :: RVS4000 Necessary To Reset To Factory Default Settings
Feb 15, 2009Recently purchased a RVS4000 Router, which included v1.1.14 firmware. Is it necessary to reset the router to Factory Default settings, after upgrading to v1.2.11, as in most of the other previous upgrades?
View 37 Replies View RelatedLinksys Wireless Router :: WRT320N Resets Wi-Fi Settings To Default?
Dec 1, 2011My router automatically sets the wireless network settings to the original default. Sometimes after 1 hour sometimes after a week. It resets to automatic instead of the manulal settings I use for configuration. Changes the SSID to Linksys and disables wireless security.
View 5 Replies View RelatedCisco Firewall :: ASA 5540 / Time Settings To Default After Reboot
Feb 22, 2011When i reboot asa 5540 firewall times settings to default
View 12 Replies View RelatedCisco Switching/Routing :: Restore Default Settings For SRW224G4
Mar 22, 2012One of our costomers has a SRW224G4 Switch - which has not any documentation :-(
I do not get onto the switch in any way. I do not have an IP-Address, the default settings for he serial port do not work ... So I cannot reach the device and reset the password like described in: [URL]
Is there any other way to reset the device? I cannot find any reset button.
Unable To Change TCP/IP And DNS Servers Settings?
Feb 21, 2013I have DELL desktop PC with Windows 7 64 bit. Once i have used HotSpot Shield for few days. After uninstalling the HotSpot, I am unable to change TCP/IP and DNS servers settings. My network adaptor is set up to default (automatically obtain ip address). Each time when i tried to change the dns servers settings, it requires a reboot (which is not happened with other PCs). and after reboot, its again set up to obtain ip and dns servers settings automatically.I have Avira FREE antivirus and its not showing any virus.I have cleaned my PC using Malwarebytes, some virus detected and removed but in vain.I am still unable to change my Network Adaptor's dns servers settings.
View 1 Replies View RelatedWireless :: How To Change Connection Settings
Feb 10, 2011I am trying to set up a internet connection to my campus network. i followed there instructions to the T. The network requires me to change my proxy settings. But every time i change my proxy to connect to the to the network, it say that i am connected but i can seem to load any pages. it worked before but i just redid my computer an it doesn't work now. one of the steps in the list of instructions given to me by the university was to select "dial whenever a network connection is not available" but selecting this is restricted for sum reason what do i do ?
View 1 Replies View RelatedNetwork Settings - Can't Change DNS Server
May 21, 2012I can't change my DNS servers. I went to my Network Settings and changed the settings for my DSL adapter. I manually changed the DNS servers to OpenDNS's servers, but when I looked again, the settings always change back to the localhost, 127.0.0.1. I tried to reset my DSL but still no luck.
View 3 Replies View RelatedHow To Change The Encryption Settings On Asus Usb N13
Jan 12, 2012I am trying to set up a asus usb n13 wlan. I have everything installed and it shows connected to my router but then I get an error message saying that the encryption settings do not match so data will not pass. The WLAN is set up to use WEP but my router uses TKIP+AES (WPA2-PSK). There doesn't seem to be a support phone number or live chat access but I did turn in a technical request form. Just trying to save time and get this thing up and running.
View 1 Replies View RelatedChange The Default Name On Sky Router?
Jul 17, 2012I'm trying to change the default name on my Sky router but when I try a pop up from Windows security is asking for my username and password which I don't have as I never set one up in the first place! is this the default password from Sky, Admin- Sky that I need to use?
View 1 Replies View RelatedSlow Internet - Reset To Windows Default Settings Feature Which Does Not Work?
Jun 22, 2011So just recently my Internet has been running a lot slower than normal at different times of the day (completely random, could be fine for hours then just turns slow). I know it's not the Internet itself, since it's only happening on my computer, and none others in the house - and I'm far from capped. I've run AVG, Spybot & Malwarebytes' scans and have found no infections of any kind. I've run TCP Optimizer and used the "reset to windows default settings" feature, which also hasn't worked one bit. I've tried different Ethernet cables and different plugs in the modem and no improvement.
View 8 Replies View RelatedCisco Security :: Can Set IP's 4260 Into Factory Default Settings With Single Command
Feb 20, 2012Can we set ips 4260 into factory default settings with a single command?
View 0 Replies View Related