Cisco WAN :: RV042 VPN Multiple Tunnels To One Main
Mar 22, 2012
I am a employed at a credit union with 17 branches. We have a mpls circuit connecting the branches to our main office. I setup DSL as a backup connection. I have 17 RV042 Cisco VPN Routers. I created a secure vpn tunnel for every branch to the main office. I made a delayed route in our main router to fail over to the VPN, in case the mpls failed. Almost everything works great except our ATM's are required to connect to a router at our main office to a different subnet than the tunnel is connecting, therefore not routing through the tunnel. I've tried creating another tunnel but only works with one of the branches, cause I get a conflict at the main office when I try a second tunnel with the same ip network. Also I tried routing all the traffic through the vpn by putting in the address 0.0.0.0 subnet 0.0.0.0, at the branch site. But I can only do that for one branch, The Downtown Cisco won’t let me create another tunnel with that setting.
View 1 Replies
ADVERTISEMENT
Jul 29, 2012
i'm working with a client on an ISE deployment and they would like to have the remote locations take advantage of it for dot1X. The potential problem that i see though is this--they have ASA5505s for tunnels back to the main location, which is great, but they also use the built-in switch...i know there are issues with the larger ASAs that require the IPN. I'm wondering if they'll need a different switch for this to work?
View 2 Replies
View Related
Mar 1, 2013
my RV042. The main login password has expired but it will not let me change it at all. Basically I try to login but get the error 'The old password has expired. Please change the password'. But with no prompt at all for a new password and just a return to the login page. Tried various different browsers, tried the old default password but nothing will work. There seems to be no way of changing it and I cannot login.
I really don't want to reset it to default as I have numerous VPN tunnels configured and various other settings.
View 5 Replies
View Related
Dec 18, 2012
We have numerous customers using Cisco / Linksys RV042 VPN firewall devices to connect to a central location via VPN tunnels. We have noticed that if there is an interruption to any of the tunnels, the RV042 v2 devices will re-establish the tunnel automatically, however the RV042 v3 devices will typically fail to automatically re-establish the connection and will usually require somebody to repower the RV042 or for somebody to clear the crypto session from the central router and then manually connect the tunnel from the RV042's VPN menu.
One of my colleagues setup two RV042 v2 devices for a site to site VPN for a customer and it worked fine. At some point they replaced one of the RV042 devices with a v3 device and since then they are having the same issue.We have this problem with several different version of the RV042 v3 firmware including the latest (4.2.1.02).
View 1 Replies
View Related
Sep 27, 2011
We have 2 Cisco ASA 5520 configured as Active/Standby with public IPs 68.171.xxx.xx6 and 68.171.xxx.xx7 respectively.We have 3 different vendors who are trying to access our Data Center. Do I have to have 3 different public IPs for these 3 different vendors? Or, just share the public IPs assigned to our 'Outside' interface?
View 3 Replies
View Related
Feb 19, 2012
i am building new vpn tunnels for multple sites using 2 ASR 1004, and 100 remote devices cisco 2800 routers.I am thinking of using getvpn to do it, am i thinking correct ? can i use DMVPN
View 3 Replies
View Related
Apr 17, 2011
I can set up multiple VPN tunnels on a cisco router 800 series?
View 9 Replies
View Related
Jan 10, 2012
I am in the process of configuring two vpn tunnels on one interface of cisco router series 1721. Any link or document with more information?
View 5 Replies
View Related
Nov 10, 2012
I purchased the RV180 to replace a dead Linksys BEFVP41 to connect a home office to HQ. The Linksys was configured with three IPSEC tunnels to connect to three different subnets all through the main HQ gateway. Note that each tunnel is independent with its own pre-shared key. I can configure the same tunnels on the RV180, and each one works correctly, but I can only get one to run at a time. I have to disable the other two. Enabling a second tunnel results in the No phase2 handle found error. I could not use the Basic VPN setup as it complains that the remote endpoint is already in use. I had to use the Advanced VPN Setup to create the IKE and IPSEC policies. In a different discussion [URL]
View 3 Replies
View Related
May 13, 2013
How to configure CISCO ASA 5510 for multiple IPsec tunnels?On other side is CISCO 2801.
View 20 Replies
View Related
Jan 2, 2012
I'm trying to research the tunnel limits on a 5508 controller if you're terminating controllers to two different SSID's. For example. In my DMZ i have a GUEST SSID for contractors and guests and then I have another SSID used by employees so that tablet and mobile phone users can access the interenet. Because we don't trust any of these devices we have that SSID is termiated just as we do our GUEST SSID.
To reduce the number of anchor controllers I deploy, I wanted to start with one 5508 Controller. (then move up to about 3) This controller would have two SSID's, GUEST & MOBILE. On the Foreign controllers when I setup anchor tunneling I will be anchoring to the same controller however to two different SSID's.
Per the 5508 specs it supports 71 tunnels.
So my question to the group is, will the 5508 see this anchoring as one tunnel each? Or does it support 71 Tunnels per SSID?
View 14 Replies
View Related
Jun 23, 2012
We have several remote sites with Linksys WRVS4400N and Smoothwall firewall/vpn devices. I need these sites to be able to connect to multiple dis-contiguous subnets at our main office. This was easily done with smoothwall and linksys. You create a separate tunnel for each subnet and voila, you're done. However, when I tried this with our newly installed ASA, it will not let me create multiple tunnels to the same remote peer address. This is a problem since these sites only have a single static public IP address. Am i missing something or does the ASA not allow connections to/from multiple subnets form a site with a single peer address?
View 13 Replies
View Related
Nov 18, 2012
Has come across issues with multiple GRE tunnels between two devices when using the same source and destination addresses. I've tried using tunnel keys but this makes no difference. The only way I can get this to work is between different source & destination addresses.
View 4 Replies
View Related
Oct 18, 2012
Due to special circumstances we have 2 ISP links on an ASA5510. I am trying to terminate some L2L VPN tunnels on one link and others on the second ISP Link, eg below:
LOCAL FIREWALL
crypto map outside-map_isp1 20 match address VPN_ACL_Acrypto map outside-map_isp1 20 set peer 1.1.1.1crypto map outside-map_isp1 20 set transform-set TS-Generic
crypto map outside-map_isp2 30 match address VPN_ACL_Bcrypto map outside-map_isp2 30 set peer 3.3.3.3crypto map outside-map_isp2 30 set transform-set TS-Generic
crypto map outside-map-isp1 interface ISP_1crypto map outside-map-isp2 interface ISP_2
crypto isakmp enable ISP_1crypto isakmp enable ISP_2
route ISP_1 0.0.0.0 0.0.0.0 1.1.1.254route ISP_2 3.3.3.3 255.255.255.255 2.2.2.254
Establising the VPN tunnels in either direction when using ISP_1 works fine establishing in either direction from remote access users and multiple L2L tunnels (only showing one for example).
On ISP_2
1. Peer 3.3.3.3 device establishes a VPN tunnel, but the return traffic does NOT get back to devices on 3.3.3.3 tunnel.
2. The local firewall does NOT establish a VPN tunnel going to 3.3.3.3
It would seem to indicate that the problems lies with this multihomed firewall not directing the traffic correctly to either return down and establised VPN tunnel (point1) or to intiate a tunnel if none exists (point 2).
Reconfiguring the VPN tunnel peer for 3.3.3.3 to be on ISP_1 of the local firewall, all springs into life! There are sufficient license etc...
View 4 Replies
View Related
Nov 4, 2011
I need to create multiple ip-sec vpn tunnels on A Cisco 837 ADSL Router. I am able to create one tunnel but the second connection is asking for the outside interface which is atm and already taken by the first tunnel. How can i create more tunnels?
Secondly, after creating the first tunnel i am able to access the remote lan network but when i tried tracert "remote lan ip of a pc" from my pc i got "request timed out" after passing my 837 but succeeded to reach the target. Does tracert needs something to be opened in the router?
View 2 Replies
View Related
Apr 11, 2013
I have two Cisco RV042 Routers, they are being used to connect two offices, i have created a standard gateway to gateway connection, fixed public ip addresses on both sides and everything works fine, except when the tunnel gets disconnected, it does not connect back automatically, i have to log into either router console and click the connect button to get the tunnel working again, this is really annoying since it happens once or twice a day at least.
View 2 Replies
View Related
Dec 4, 2012
Question on ASA VPN tunnels. I have one ASA 5510 in our corporate office, I have two subnets in our corporate office that are configured in the ASA in a Object group. I have a site to site IPSEC tunnel already up and that has been working. I am trying to set up another site to site IPSEC tunnel to a different location that will need to be setup to access the same two subnets. I'm not sure if this can be setup or not, I think I had a problem with setting up two tunnels that were trying to connect to the same subnet but that was between the same two ASA's. Anyways the new tunnel to a new site is not coming up and I want to make sure it is not the subnet issue. The current working tunnel is between two ASA 5510's, the new tunnel we are trying to build is between the ASA and a Sonicwall firewall.
View 3 Replies
View Related
Aug 24, 2011
I have a RV042 with multiple subnet, 192.168.10.0 and 192.168.9.0. 192.168.10.0 is assigned to the LAN, 192.168.9.0 is created under multiple subnet. Both subnet can access Internet by accessing IP address, but 192.168.9.0 cannot access Internet by using host name. It looks like DNS is not working for the 9.0 network.
View 1 Replies
View Related
Jan 22, 2013
Here's what I want to do with my RV042: I have a bunch of devices, including a server, inside my network at 192.168.1.100
I've set up VPN using PPTP. It works, but if my clients have their own remote DHCP set up to 192.168.1.x, they can't get to the server. If their home DHCP is 10.x.x.x., everything works
I am considering changing my internal network to something obscure.
My server has two NICs. So I thought, I why not set one address up to 10.x.x.x But the two nets can't ping each other. I tried using "multiple subnet" on the RV042, setting up 10.1.1.1, but no luck.
View 1 Replies
View Related
May 19, 2012
We have 36 cctv cameras slowing down our oracle network pc's all in same subnet. I want to remove the dvr's of cctv to a separate network to improve performance. How to accomplish that with a Rv042 linksys router? Or is there any other better way around. 5 Users access the cctv cameras all the time.
View 2 Replies
View Related
Aug 5, 2011
We have 4 RV 042 routers and cisco router at HQ, we have Site to Site VPN tunnels in between, All branch offices are connected to HQ via S2S VPN tunnels
10.10.1.0/ 24 HQ
10.10.2.0/24 Branch 1
10.10.3.0/24 Branch 2
10.10.4.0/24 Branch 3
10.10.5.0/24 Branch 4
now lets say i am branch 1, i can access 10.10.1.0/24 network but cant access 10.10.5.0/24 network, means i dont have branch to branch connection, it should be through HQ, means my RV042 at brnach should fwd all traffic to HQ for another branches also. Under VPN tunnel if i try to configure remote destination 10.10.0.0/21 its not allowing me it says network overlaping with local network, how i can sole it, I know how to do in cisco, we can permit those networks in access lists.
View 1 Replies
View Related
Aug 15, 2012
We have setup a new internal web server so now we have two internal web server and both or hosting sites on port 80. Currently we have port 80 forwarding to one of the web servers and users are able to hit it from the outside.
Is there any way to configure the RV042 to route web traffic to the correct web server by using the site name or dns? If a user puts in the address{URL}, be routed to one web server but if they put in {URL}, be routed to our second web server. I've checked with our vendors and the both web servers applications need to run on port 80. If we have forwarding setup on the RV042 to forward port 80 to web1 then users can't access web2 from the outside?
View 3 Replies
View Related
Sep 27, 2012
I'd like to set each individual LAN port with different address i.e. LAN 1 192.168.1.1 and LAN 2 10.1.1.1 instead of using the multiple subnet feature and having all ports replying for the addresses created.
View 3 Replies
View Related
Aug 16, 2011
We have Point to point T1 environment where 3 additional WAN sites get internet access through our RV042. When we setup load balancing we have problems with https traffic, so we setup protocol binding for https and everything worked great from the local LAN. When trying to access https content from the remote LAN across the WAN the sites failed and I see no option to add additional subnets to the protocol binding. Is there a command line feature that supports adding additional subnets for protocol binding or is the local LAN the only option?
View 7 Replies
View Related
Oct 6, 2011
if possible with the RV042.Primary External IP address uses port forwards for some ports, all okay.I would like to have other external ip addresses assigned to machines on my lan.Basic host multiple web servers, on different IP addresses, using port 80. [code]
From what i am reading, it looks like the RV042 can do this, but I am not real clear what my rules should look like.
I would think my high priority rule for each external IP address would be to deny all traffic first for each machine on the lan.Then create one entry with source 202.x.x.2 port 80 -> 192.168.168.2 ?
How should I set my rules to do this, and what settings should I have on the Nic of the second machine?
View 3 Replies
View Related
Nov 27, 2011
We have RV 042 deployed for internet access/firewall purposes. Due to growing number for Wireless devices and also to separate WLAN traffic from wired devices, we have created a separate VLAN/IP Subnet for the wifi devices. We are having trouble accessing the internet from the WiFi VLAN/IP Subnet. Cisco 3750 is layer 2 and layer 3 device. We have VLAN 1 (10.10.10.0/255.255.255.0), all wired devices and RV 042 are part of VLAN 1. Connectivity to internet from VLAN 1 is good. VLAN 2 (192.168.1.0 / 255.255.255.0) was created for wifi devices, 3750 does the inter-vlan routing, I have enabled the multiple subnet feature on the RV 042 and added 192.168.1.2 / 24 to the subnet list, we still have issues accessing internet from vlan 2 devices.
As a workaround, I shutdown vlan 2 and added 192.168.1.0/24 as secondary address to the VLAN 1 interface on 3750 and i was able to access internet from 192.168.1.0/24 network with wifi devices also on vlan 1, we want wifi devices to be on separate vlan / ip subnet. Looking at the documentation for RV series routers, it talks about supporting multiple subnets access to internet by enabling multiple subnet feature but it doesn't seem to work.Are there restrictions on having multiple vlans?
View 4 Replies
View Related
Mar 2, 2012
would you explain the main differences between lms 3.2 and 4.2 cause my company is about to purchase the new version;
- how does it changed in taking reports ?
- how does it changed and improved in monitoring?
View 1 Replies
View Related
Sep 6, 2012
My computer at work crashed so I had to reinstall windows 7.When it was working properly I was able to connect to our main server computer. After the reinstall I am able to connect to the internet however I am unable to connect main server computer. Usually, before it crashed, the server would automatically show up in the networks folder. Now all I can see it my computer and not the server computer.If someone knows how I can get my computer connecting to the main server I have tried everything and nothing is working.The main server computer it Windows XP and my computer is Windows 7.
View 4 Replies
View Related
Jan 16, 2012
Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the internet i use an Ethernet cable which is directly connected to my main PC my windows is also window XP and my modem model is TG782T only if my PC is turned off the wireless works
View 2 Replies
View Related
Mar 22, 2011
I have four Laptops,and also have SMCWBR14S-N4(SOHO) Wireless Routers. The issue is if i connect to my main Laptop all the other laptops gets disconnected. I have checked the mac filtering, reset the Router & reconfigured with new wireless settings still the issue persist. If i connect the Laptop to the modem main Laptop works fine.
View 4 Replies
View Related
Jan 16, 2012
Whenever my main PC is turned on, i get no [COLOR=blue !important][COLOR=blue !important]signal[/COLOR][/COLOR] from the wireless, like i cannot use my phone or laptop on the internet i use an ethernet cable which is direclty connected to my main PC my windows is also window XP and my modem model is TG782T only if my pc is turned off the wireless works
View 17 Replies
View Related
Jan 16, 2012
Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the interneti use an [COLOR=blue !important][COLOR=blue !important]ethernet[/COLOR][/COLOR] cable which is direclty connected to my main PCmy windows is also window XP and my modem model is TG782T
View 2 Replies
View Related
Feb 9, 2011
A couple days ago my administrator account stopped being able to connect internet via wireless or Ethernet however my other accounts can still access it. I went to find a restore point but they have all been deleted. I'm not sure if it is a virus or something else.
View 5 Replies
View Related
