Cisco Routers :: RV042 Main Login Password Has Expired
Mar 1, 2013
my RV042. The main login password has expired but it will not let me change it at all. Basically I try to login but get the error 'The old password has expired. Please change the password'. But with no prompt at all for a new password and just a return to the login page. Tried various different browsers, tried the old default password but nothing will work. There seems to be no way of changing it and I cannot login.
I really don't want to reset it to default as I have numerous VPN tunnels configured and various other settings.
View 5 Replies
ADVERTISEMENT
Sep 21, 2011
Today I purchased a RV042 wired router. I set the VPN connection but when I try to login using QuickVPN, get stucks in "Verifying network". I checked the logs:
2011/09/22 20:43:45 [STATUS]OS Version: Windows 7
2011/09/22 20:43:45 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/09/22 20:43:45 [STATUS]Windows Firewall Private Profile Settings: OFF
[Code]...
From my side Im connected to a WRT54G2. VPN Passthrough enabled. Windows 7 Pro x64. No 3rd party AV or firewall. Windows Firewall disabled, also tried enabling it.
From the RV042 side it has a Static IP Address configured. DHCP server enabled. HTTPS enabled. UPnP disabled. L2TP disabled.Firewall disabled. Block WAN Requests disabled.
View 6 Replies
View Related
Feb 2, 2009
we are using Cisco RV042 router with i guess V3 hardware version, latest driver version (4.2.1.02). We changed the username and password from admin, default, to another name and password. Since then, we are able to log in only once, once the router is restarted. If we leave the page, logout or after several hours after boot, we wont be able to log to web administration again. We enter username, password, submit, the image keeps spinning, but nothing happens.
View 5 Replies
View Related
Feb 1, 2012
I'm running a new RV042 with the latest firmware (4.1.1.01). I set it up about 2 weeks ago and have been running it without an issue. Today I tried to go in to the web utility to make some changes. I was prompted for the userid/password, which it appeared to accept (if I typed in the wrong ones it rejected it), and then the screen went blank (normally I would get the status screen now.) Instead the screen I get is the light blue of the log-in screen, but there is nothing on it. The router has switched to the page https://192.168.1.1/home.htm I have tried different browsers and accessing it from different computers - the situation is always the same. I have power cycled the router, and there is no change. I suspect the next step is a manual reset to factory defaults - but of course I would rather not (as I didn't save all my settings of course!)
View 2 Replies
View Related
May 16, 2012
My organization has deployed 3 Cisco RV042 (v3) at our 3 sites. They have been working pretty well up until about a week ago. One of them continues to route traffic and perform port-forwarding, but the VPN has completely stopped working and I can no longer access the web administration interface. I get the standard login page, but any attempt to login (with correct or incorrect password) takes maybe 5 minutes with a spinning status icon, followed by a blank page leaving the browser at: url...
I have the router logs e-mailed to me, and I can see that the system boots up with Jan 1 2010 as the system date, but it eventually gets the correct date from NTP, so I'm doubting this is causing the problem.
These were working for months prior to this happening, and even a reboot of the affected RV042 does not allow me to log into it or setup the VPN tunnels. I have found similar threads on this forum: url...
View 2 Replies
View Related
Aug 28, 2011
My first try at configuring my RV042 has had unexpected results. I set a WAN and LAN address, but did not enable remote managment and did not configure any port forwarding. I expected to be able to connect to the router on the LAN and I could. The surprise came when I put in my web address. I got a router login page. How do I suppress than on the WAN side. I have a static address with my ISP.
View 1 Replies
View Related
Aug 25, 2011
I have configured under Administration password policies about password lenght, items to be putted as number, letters and so on.on the second tab is the password expire for users and I configured to expire after 90 days.
I even tried creating a new user and changing a password from an existing user using Apache TOMCAT WAR,I have checked CLOCK of ACS appliance and setted up NTP on our internal NTP servers
even I create a new user or I change the password via Admin GUI or I change the user password via Apache TOMCAT WAR, I have the user being disabled in a few of minutes, half an hour.,As last, with CISCO AnyConnect is possible to warn the user about the password being expireing and if so, the change could be driven via AnyConnect or is absolutely needed a User Hand Task on the Apache TOMCAT portal I setted up with the ACS WAR application?
View 6 Replies
View Related
Dec 21, 2010
Now, My ACS and ASA connected with RADIUS(MSCHAPv2). I set up Password Lifetime on ACS and Password Management on ASA.But Cisco ASA doesn't has prompt change or notify anything when user try to login with Clientless SSL VPN. Could user change or notify password expired?
I check change password on th first login on ACS that ASA propmt to change password dialog. But I want to change or notify when password expired
View 5 Replies
View Related
Mar 22, 2012
I am a employed at a credit union with 17 branches. We have a mpls circuit connecting the branches to our main office. I setup DSL as a backup connection. I have 17 RV042 Cisco VPN Routers. I created a secure vpn tunnel for every branch to the main office. I made a delayed route in our main router to fail over to the VPN, in case the mpls failed. Almost everything works great except our ATM's are required to connect to a router at our main office to a different subnet than the tunnel is connecting, therefore not routing through the tunnel. I've tried creating another tunnel but only works with one of the branches, cause I get a conflict at the main office when I try a second tunnel with the same ip network. Also I tried routing all the traffic through the vpn by putting in the address 0.0.0.0 subnet 0.0.0.0, at the branch site. But I can only do that for one branch, The Downtown Cisco won’t let me create another tunnel with that setting.
View 1 Replies
View Related
Jun 28, 2012
What Happens if I Used 2 to 4 more wireless routers acting as Main Routers in my network? that their DHCP are enabled? would it cause connection Disturbance? I Have 4 Cisco Linksys E300 all of thier DHCP are enabled..so they have 192.168.2.1,192. 168. 3.1, 192.168.4.1, 192.168.5.1
View 4 Replies
View Related
Aug 1, 2012
main computer will not connect to internet but laptop does
View 1 Replies
View Related
Oct 27, 2011
I'm using a RV082 with latest firmware v4.0.4.02tm in one of our branch offices. Sometimes the tunnel to the main office (IPCOP 1.4.21) fails.
Both sides display the status "tunnel connected" but IP traffic doesn't go through. If i try to ping the main office using the RV082 diagnostic feature, the RV082 seems to run into a loop...the window continues refreshing without any error message and i'm not able to cancel the test. If I restart the RV082 using the web interface, the "diagnose" and VPN problem still exists, even if the web interface told me that the device did a restart.
The only solution is to to a cold restart of the RV082. After that, the VPN tunnel works again....
This problem occurred 3 times in the last 3 weeks. I never hat this problem with previous firmware versions at this ot other sites.
View 1 Replies
View Related
Dec 17, 2012
I am running 9.11 and I have created users with password but it has no effect on the SSH Login!I don't get it... What am I missing?
View 3 Replies
View Related
Jan 3, 2013
trying to setup universal wifi extender. Lights indicate system is on and connected to my computer. however wps and link rate lights are not on.
View 1 Replies
View Related
Apr 28, 2012
I need to reset my login password
View 3 Replies
View Related
Feb 19, 2013
i have a SG300-28 switch here but I do not have the password to login the device. From the startup config of the switch, I see the login password is encrypted. Are there anyway for me to access the device without reset it?
View 2 Replies
View Related
May 27, 2011
I got an ASA 5505 recently and i'm new to using firewalls but have forgotten the username and password that was set on it for login using SSH (putty). Is there a way i can stiil login to it or even reset the password so i can login using Putty?
View 1 Replies
View Related
Nov 25, 2012
As observed ACS 5.x " Change Password on Next Login" Feature does not work with SSH Clients ( tried with X-sheel, Secure CRT, Putty etc...) , however through telnet session to IOS devices, users can change their password on their next login.
1: on ACS 5.x i create a new user & Set " Change password on NExt Login" option.
2: Logged into the device through Telnet & Password can be changed after i authenticate successfully. however the same is not happening when i login to the devices through SSH.
is it because of the fact that SSH is encrypted session ?
Because changing password through a telnet session is not accepted in many fanancial organizations as per PCI Standard.
View 2 Replies
View Related
May 8, 2013
I have recently aquired a Cisco SGE2000 switch and the first thing I did was update to the latest firmware and change password. Now I cant login? Neither my admin / admin dosent work nor the new user I have created. Is there any characters that this dosesnt support like backslashes or forward slashes for password? If not then what can I do to get access to the switch again?
View 2 Replies
View Related
Jan 10, 2013
what is the WI-fI Network name (SSID) and Network Key (password) of my Netgear N600 Wireless Dual Band Router WNDR3400v2
View 1 Replies
View Related
Jun 24, 2011
How i can get access lan computer drives with out entering login password
View 1 Replies
View Related
Jan 20, 2013
I've get telnet access to my DCS-942L, but i can't log in because of wrong login/password. Neither newly created or changed admin's login/pass nor user's login/pass is not working! Which is default telnet login and password then?
View 4 Replies
View Related
Aug 30, 2012
I have a customers Catalsyt 2950 switch come in for the configuration to be cleaned to factoy default, using the link below removed the customers banner and login information whitch worked
[URL]
When i restart the switch and enter Enable mode I'm prompted with the password which i used when following the link above,
I want to remove all passwords so when the switch is redeployed to the next site who ever the engineer is that is going to be reconfiguring the switch is able to access privlage mode with out the password promt.
View 2 Replies
View Related
Jun 30, 2012
I am installing my AE1000 in a new computer. During installation I enter my wireless network password which is on 5 characters long but the next tab does not light up to proceed to the next step. It only lights with 8 characters though my password is 5 characters long
View 2 Replies
View Related
Jan 24, 2013
I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042 router and was succesful ( by typing 192.168.1.1 in the explorer and logged in using user name and password )
I am using a linux embedded system whose Internal IP ,Internal port are mapped .This system is connected to one of the LAN ports
I want to try auto UPnP port forwarding both for RV042 router and Linksys E4200 routers
After enabling the Upnp option only and logging out ,Can i add a port mapping entry in this router without logging in using a C++ program which runs on linux embedded system .
View 2 Replies
View Related
Aug 22, 2012
I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?
View 5 Replies
View Related
Apr 3, 2012
Last year our Network Security Supervisor submit his resignation and unfortunately did not endorse us the admin password we already tried the password he suggested when we contacted him but nothing of them works. Is there anyway we can reset the password without resetting to factory default?
View 1 Replies
View Related
Mar 25, 2012
I have just received an RV120W. Default setup (out of box), but when I http://192.168.1.1 and login, the next page comes up as : Internet Explorer cannot display the webpage ? Internet Explorer is version 9.
I have allowed both http and https at 192.168.1.1 in Internet Explorer security settings/Trusted Sites ?
Is there a console connection to this box ?
View 3 Replies
View Related
Aug 5, 2011
Your ip address lease has expired. dhcp was unable to renew your lease. My netbook shows it is connecting to the network both with the cable and wireless but when i try to go on to the internet i get this error.
View 1 Replies
View Related
Feb 21, 2013
i just bought a netgear router. i was able get into routers login screen once. thought every thing is good? everything looked correct? now i cant get into login screen at all again. im confused it should be easy. either use 192.168.1.1 or 192.168.1.2 or 192.168.0.1 and 192.168.1.254. i tried them all with no luck.
View 3 Replies
View Related
Sep 13, 2011
We have a client that was using Eap TLS i think and their PKI Cert have expired. I took some notes so I appologize if this question is incomplete. ACS 4.2 is also being used. ?
How to renew these certs?
View 4 Replies
View Related
Aug 9, 2012
Just installed a new WRVS4400N router. wireless working. however refuses to let me log back via Ethernet cable in at URL given me 403 Forbidden, Access Denies, Management via WLAN is not allowed. Was able to reset and noe braodcasting unsecured "cisco b" signal, but no way to get into router and set up security. unsure what I have done.
View 1 Replies
View Related
Mar 12, 2013
I am locked out of the rv220w. After typing in username and password into the admin page I get "i18nHTMLMissing". I can't clear the error, even after a reboot/reset of the router. Any wat other than a factory reset? This is a brand new box .
View 1 Replies
View Related
