Cisco Routers :: RV042 - Login Using QuickVPN

Sep 21, 2011

Today I purchased a RV042 wired router. I set the VPN connection but when I try to login using QuickVPN, get stucks in "Verifying network". I checked the logs:

2011/09/22 20:43:45 [STATUS]OS Version: Windows 7
2011/09/22 20:43:45 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/09/22 20:43:45 [STATUS]Windows Firewall Private Profile Settings: OFF
[Code]...
 
From my side Im connected to a WRT54G2. VPN Passthrough enabled. Windows 7 Pro x64. No 3rd party AV or firewall. Windows Firewall disabled, also tried enabling it.

From the RV042 side it has a Static IP Address configured. DHCP server enabled. HTTPS enabled. UPnP disabled. L2TP disabled.Firewall disabled. Block WAN Requests disabled.

View 6 Replies


ADVERTISEMENT

Cisco Routers :: RV042 QuickVPN Not Working For All PCs

Oct 21, 2011

So have a RV042 VPN router that is directly connected to the ethernet port of our comcast cable modem.
 
If I connect to it using QuickVPN (1.4.2.1) from a PC that is connected using AT&T 3G Network it works fine!
 
If I connect to it using QuickVPN (1.4.2.1) from a different PC that is connected using home WiFi (linksys wrtxxx) then it fails. In the VPN log all I see is failure messages for ping.
 
2011/10/22 15:47:28 [WARNING]Failed to ping remote VPN Router!
 
If I open a regular command prompt and attempt to ping the VPN router it works so not understanding why the QuickVPN is unable to ping.
 
how I can troubleshoot this further. Makes me think the RV042 config is fine otherwise it would not work on a 3G connection. Something on the home PC or the home network. Not sure what to check.

View 2 Replies View Related

Cisco Routers :: RV042 - QuickVPN Error

Mar 11, 2012

I've one RV042. I've configured VPN PPTP and it work (I've redirect port 1723 on router1 to rv042). If I can try to use quickVpn, client login and receive error "remote gateway is not responding". I have redirect port 60443 from router1 to rv042. Connection it's this: INTERNET-router1-RV042.

View 3 Replies View Related

Cisco Routers :: RV042 QuickVPN / Gateway Not Responding

Jun 28, 2011

I have router Linksys RV042 v1.2 with latest firmware Version: 1.3.13.02-tm. And I'm using QuickVPN v 1.4.1.2. I've setup VPN connection with values, below: But every time I'm trying to connect to router by VPN it always popup a window "Remote Gateway not responding".It occurs when I'm trying to connect to VPN behind other router, when I'm connected directly to Internet the connection is established.But I'm connecting to other networks using VPN and it's working properly (behind the same router), so I think it's problem with RV042 configuration but I don't now weher.

View 5 Replies View Related

Cisco Routers :: RV042 Configuration With QuickVPN In Windows 7

Oct 1, 2012

I've been working on getting a client to Gateway configuration going for quite some time now.  Had it working with a different Cisco single wan router that failed.  The user replaced the router with an RV042 and we are trying to get the QuickVPN to once again connect to the router as it did before the replacement.  Previously we did connect successfully with Windows 7 clients.
 
Router: RV042 v3 firmware 4.0.4.02-tm Quickvpn version 1.4.2.1
 
what i keep getting in the log is the following :
 
2012/10/02 12:55:07 [STATUS]OS Version: Windows Vista
2012/10/02 12:55:07 [STATUS]Windows Firewall Domain Profile Settings: ON
2012/10/02 12:55:07 [STATUS]Windows Firewall Private Profile Settings: ON

[Code].....

View 5 Replies View Related

Cisco Routers :: QuickVPN RV042 V03 Some Users Connect Others Can't

Feb 10, 2013

A client of mine has a Cisco RV042 Router. I've configured it to run VPN and it works, sort of. Some clients can connect, others can't, for no discernible reason.

Specific machine issues are Windows 7 x64 or x86, Quick VPN latest release, unobtrusive (Avast or Microsoft Security Essentials) security, etc. 2 separate machines on the same home remote network, 1 can connect just fine, the other can't. My laptop (Win7 x64) connects just fine, one of my techs can connect OK, the IT support guy that works for this client can connect.
 
Particulars of the router: Firmware version: v4.0.4.02;  PID VID : RV042 V03;  Firmware MD5 Checksum :     1f84d8d0a2a8b99f9bfa4409e64547aa

View 3 Replies View Related

Cisco Routers :: RV042 - QuickVPN Versus Standard VPN Client

Nov 15, 2011

I have a RV042 router setup with Client to gateway VPN access, and am connecting with a W7 PC running QuickVPN. We have many PC's that already have the standard CiscoVPN client on them, is it possible to configure the RV042 to allow these clients to conenct? I'm not sure how to get the Mutual authentication to work, or how to import the PEM certificiate into that client. It seems to allow it to import, but I can never select it.

View 2 Replies View Related

Cisco Routers :: RV042 QuickVPN Loops While Verifying Network?

Nov 15, 2012

I used to have the problem where QuickVPN keeps on trying to verify the network because the RV042 cannot get the final ping to the client.I then bought a RV042 HW version 3 on the VPN side and I installed RV042's at the clients as well.This may look like overkill but believe me, it gives peace of mind, it made things a whole lot better, everybody happy.I am going to set up tunnels but for the time being the clients use QuickVPN. The above setup is all good if people access the vpn from the same source.
 
I now have a problem where one of our people is in Vietnam and she cannot access the vpn due to the "verifying network" loop.Looking at the log everything looks great, I compared a successful connect with an unsuccessful one and the logs are identical.The only difference is that the final ping is blocked (recorded in the QuickVPN log on the client side).The client uses W7 with firewall on.No need to repeat suggestions, such as turing printer sharing off, I have been through all that. isn't this simply caused by the ISP in Vietnam blocking pings ?

View 2 Replies View Related

Cisco Routers :: RV042 - Access Site 2 Resources Via QuickVPN Connection?

Nov 15, 2010

So here is my issue. I have two sites, each with a Linksys RV042 on thier site.
 
Site 1:
External: 142.142.142.142
Internal: 192.168.25.0/24
 
Site 2:
External: 143.143.143.143
Internal: 192.168.26.0/24
 
We have setup a site-to-site VPN between these sites, and all traffic is running back and forth without isse.
 
At Site 1 we have configured the Client VPN for use with the QuickVPN software. Again, for site 1, this is not an issue. We are able to access all internal resources at Site 1 without issue (expect for some DNS related problems).
 
The problem that we have is attempting to access Site 2 resources via the QuickVPN connection at Site 1. Even though they are not suppose to exist, we are able to ping 192.168.26.1-6 (which are ghost addresses likely created by the RV042's) but no actual systems on at Site 2.
 
I have added the Client VPN connection at Site 2, but it has the same problem accessing resources at Site 1.

View 6 Replies View Related

Cisco Routers :: Quickvpn / Client To Gateway Vpn Rv042 Can Only Ping Router?

Jan 27, 2012

I am setting up remote access using an RV042 router.  Using quickvpn or a client-to gateway vpn and shrewsoft client,  I can only access/ping the LAN side of the remote router and one machine on the remote network.  The PPTP server and native Windows 7 connection provide access to all machines on the remote network.I have 2 possible reasons for this and would like to find the real reason:
 
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.

2)  The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.

View 2 Replies View Related

Cisco Routers :: RV042 Cannot Login To Web Administration After First Logout

Feb 2, 2009

we are using Cisco RV042 router with i guess V3 hardware version, latest driver version (4.2.1.02). We changed the username and password from admin, default, to another name and password. Since then, we are able to log in only once, once the router is restarted. If we leave the page, logout or after several hours after boot, we wont be able to log to web administration again. We enter username, password, submit, the image keeps spinning, but nothing happens.

View 5 Replies View Related

Cisco Routers :: RV042 Web Utility Screen Goes Blank After Login?

Feb 1, 2012

I'm running a new RV042 with the latest firmware (4.1.1.01).  I set it up about 2 weeks ago and have been running it without an issue.  Today I tried to go in to the web utility to make some changes.  I was prompted for the userid/password, which it appeared to accept (if I typed in the wrong ones it rejected it), and then the screen went blank (normally I would get the status screen now.)  Instead the screen I get is the light blue of the log-in screen, but there is nothing on it.  The router has switched to the page https://192.168.1.1/home.htm  I have tried different browsers and accessing it from different computers - the situation is always the same.  I have power cycled the router, and there is no change.  I suspect the next step is a manual reset to factory defaults - but of course I would rather not (as I didn't save all my settings of course!)

View 2 Replies View Related

Cisco Routers :: RV042 Main Login Password Has Expired

Mar 1, 2013

my RV042. The main login password has expired but it will not let me change it at all. Basically I try to login but get the error 'The old password has expired. Please change the password'. But with no prompt at all for a new password and just a return to the login page. Tried various different browsers, tried the old default password but nothing will work. There seems to be no way of changing it and I cannot login.
 
I really don't want to reset it to default as I have numerous VPN tunnels configured and various other settings.

View 5 Replies View Related

Cisco Routers :: RV042 - VPN And Admin Login Stopped Working

May 16, 2012

My organization has deployed 3 Cisco RV042 (v3) at our 3 sites. They have been working pretty well up until about a week ago. One of them continues to route traffic and perform port-forwarding, but the VPN has completely stopped working and I can no longer access the web administration interface. I get the standard login page, but any attempt to login (with correct or incorrect password) takes maybe 5 minutes with a spinning status icon, followed by a blank page leaving the browser at: url...
 
I have the router logs e-mailed to me, and I can see that the system boots up with Jan 1 2010 as the system date, but it eventually gets the correct date from NTP, so I'm doubting this is causing the problem.
 
These were working for months prior to this happening, and even a reboot of the affected RV042 does not allow me to log into it or setup the VPN tunnels. I have found similar threads on this forum: url...

View 2 Replies View Related

Cisco Routers :: RV042 / Login Screen On WAN Address With Remote Management Disabled

Aug 28, 2011

My first try at configuring my RV042 has had unexpected results. I set a WAN and LAN address, but did not enable remote managment and did not configure any port forwarding.  I expected to be able to connect to the router on the LAN and I could. The surprise came when I put in my web address.  I got a router login page.  How do I suppress than on the WAN side.  I have a static address with my ISP.

View 1 Replies View Related

Cisco VPN :: QuickVPN - Gateway Not Responding - RV042?

Oct 28, 2011

I'm running Cisco QuickVPN on a clients laptop (Windows 7). Windows firewall is disabled because McAfee SaaS is running.I sometimes have the issue that the initial connection attempt comes back with "Gateway not respoding" during the network verification process. You close the program, you open it again and it works. Sometimes it takes 2 or 3 tries. Today I have the issue that my client tried it like 20 times including several reboots and it's just not working. I tried it from my own computer and it connected fine on the 2nd try.I'm thinking that it might be time-out thing, that the VPN client doesn't receive a response fast enough? I know my clients home internet is darn slow.

View 1 Replies View Related

Linksys Wired Router :: QuickVPN From BEFVP41 To RV042?

Sep 24, 2006

my office network is running using a Linksys Router RV042 and at home i have a Linksys Router BEFVP41. i'm trying to setup a QuickVPN from home to my office but having problems. both routers have different LAN IPs. the firmware version for my two routers are listed belowRV042 - ver. 1.3.7.4BEFVP41 - ver. 1.02.00?

View 5 Replies View Related

Cisco Routers :: RV220W / What Exactly Is QuickVPN

Apr 2, 2012

what exactly is QuickVPN?Is it a IPSec VPN?Is it a PPTP?Is it a SSLVPN?can I resolve my local hostnames? That means, can I configure a lokal DNS Server?

View 3 Replies View Related

Cisco Routers :: How To Setup RV120W For QuickVPN

Aug 22, 2011

The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?

View 1 Replies View Related

Cisco Routers :: RV120W QuickVPN And Windows 7

Oct 29, 2011

I have been battling with my Cisco RV120W router and QuickVPN.Running Windows 7 Home PremiumPerformed a fresh install to factory out-of-box install for WindowsRemoved NortonDid NOT perform any windows updatesInstalled QuickVN version 1.2.4.1I have updated the firmware to the latest version (confirmed by cisco)I can connet to the router and have a stable connectionI can ping both the router IP and the shared file server IPWhen I enter the shared file server IP into the search field (e.g. \192.168.100.199) and press enter, I see a connection to "share", so I click on this and then see "FolderName" of my shared files. I click on this folder and I get a timed out error.When I enter the routers IP address into a browser (IE8 as factory installed) I get a timed out error also.In the past, I have installed all important and recommended updates for Windows and still get the same scenerioI have called cisco support and went through router settings, assigned them a VPN username, they log in and can access the files without issue (What the @#$$@#$)Cisco support spent plenty of time with me, but since they could access my network and since I could ping my devices, they had no other suggestions further.
 
I have this fresh factor out-of-box install. I know this is most likely something to do with my laptop that I am trying to use to connect to the network. I have Frontier as my ISP for home. I don't know if there is anything they are doing to interfere with my connection. I have tried to connect to the network via ComCast as well, with no luck.tell me if there is something I need to tweak in my Windows 7 settings?

View 11 Replies View Related

Cisco Routers :: Using Remote DNS With QuickVPN - WRVS4400N

Dec 11, 2011

I've deployed a WRVS4400N router at one of my clients, however I'm unable to access resources on his network via DNS. I was hoping to use the router for DNS resolution, however when I connect via VPN, I can only connect to shares via IP address.

View 1 Replies View Related

Cisco Routers :: Cannot Connect QuickVPN To RV120W

Mar 6, 2012

I have a Cisco RV120W connected to the internet. I have configured a QuickVPN user on the router, but I cannot connect via QuickVPN no matter on what PC I try (with firewall or without firewal, Windows XP, 7, ...). On the router it says the VPN user is connected, but on the client PC I receive remote gateway not responding. In the logs it says failed to ping remote VPN router. I tried changing all settings I could find on this forum, but the result stays the same (changed port to 60443, deleted all IKE and VPN policies, allowed ping, disabled fragmented packets etc...). None of all the settings seems to get any result.

View 11 Replies View Related

Cisco Routers :: RSV4000 And QuickVPN Not Working?

Oct 6, 2011

I got a RSV4000 router here with the latest firmware 1.3.3.5, trying to get the quick VPN client to connect.As far configurations go I have under WAN set the IP, subnetmask, DNS1, DNS2 and gateway. And under VPN I have created a client account with a password, created and then exported the Cert to my client PC.But when I attempt to connect, the QuickVPN software hangs for a few moments at "Connecting" and then fails; when the general error.I'm running this on Windows 7 x64.

View 1 Replies View Related

Cisco Routers :: RC120W Setup For QuickVPN Connection

Aug 10, 2010

I did upgrade to WiSM from v5.1 to V6 then i see this log %WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost keepalives from Cat 6K Supervisor.

View 6 Replies View Related

Cisco Routers :: QuickVPN To RV082 No Longer Stable

Sep 11, 2011

I have a RV082 in the corporate office, and several remote people connecting to it using QuickVPN through a variety of clients (XP and Windows 7).  As of today, they are all now seeing the "Remote Gateway is not responding - disconnect or wait" message.  Checking through the logs on some of the remote clients, I see the "Failed to ping the remote router" message several times, followed by the "Ping was blocked, which can be caused by an unexpected disconnect." message.
 
The odd thing is that everyone has been running very well over the past 2-3 weeks - most people with 8+ hours of solid connectivity.  We made no changes to the clients, nor to the remote router in the corporate office.

View 3 Replies View Related

Cisco Routers :: RV220W QuickVPN Limited To 10 User Instead Of 25?

Oct 11, 2011

I just bought a RV220W for my small company. I have read everywhere that this model come with 25 license for QuickVPN/IPsec.But when I tried to create all my account I had a bad surprise. The firmware tell me that the maximum number of user that I can create is 10! I dont see anywhere in the firmware where I can upgrade for another licence. I have the last firmware.

View 7 Replies View Related

Cisco Routers :: QuickVPN In Windows 7 Not Connecting To RVS4000

Oct 11, 2011

When I use QuickVPN under XP, I connect to my RVS4000 without problems.  When I switch to new computer running Windows 7 and V4.2.1 QuickVPN I can get all the way to Verifying Network.   Then I get the message that: "The remote gateway is not responding.  Do you want to wait?"  - repeatedly.  The icon in the tool bar remains with a red slash and I am unable to ping devices on the lan side of the router.  However, when I check the VPN Summary on the router, I see that it thinks I'm connected.  When I check the VPN log I see that I am not:
 
Oct 12 10:27:53 - Configuration changed!
Oct 12 10:28:33 - Configuration changed!
Oct 12 10:28:34 - [VPN Log]: added connection description "ValR_rw_rw"

[Code]....

I've disabled MS Security Essentials and made sure the Firewall is on.  IPSec  Policy Agent and IKE and AuthIP IPSec Keying Modules services are both started.  I've created a rule to allow QuickVPN throught the firwall in and out and a rule to let traffic on 443 and 60443 UDP and TCP through the Firewall. 

View 19 Replies View Related

Cisco Routers :: RV120W - Setting Up A QuickVPN User?

Jan 15, 2013

have a Cisco RV120W and I need setup a Quick VPN user, however i can't enable this user.I have Remote Management enable, access type All Ip Address and port number 443.

View 3 Replies View Related

Cisco Routers :: RV180 Behind DSL Router Can't Connect With QuickVPN

May 15, 2013

I want to ask if is possible to configure the RV180 behind my DSL Router to connect using QuickVPN. First I tried to connect to the PPTP server and worked fine, but when I tried to connect using QickVPN, seems to connect but when the client says "verifying network" after a while appears the message "network not responding..."
 
In my DSL-Router forwared this ports: UDP: 500,4500,443,60443 - TCP: 443,60443 (i don't know if tcp ports are needed but I opened for testing) and allowed protocol ESP (comes with the rule to allow IPSEC-L2TP)

View 3 Replies View Related

Cisco Routers :: RV120W - QuickVPN Gateway Not Responding

Jan 1, 2012

I am trying to install a Cisco VPN Router RV120W behind this router. I have setup the Cisco and can access the internet from the device. I also setup the Actiontec router with the DMZ host as the Cisco router. When I try to connect to the VPN tunnel however I connect but receive an "Gateway is not responding" error message after 30sec. Is there anything else I need to setup on the actiontec router to allow VPN passthough or something like that?
 
 
Actiontec Lan IP: 192.168.1.1
Cisco Wan IP: 192.168.1.2
Cisco Wan SN: 255.255.255.0
Cisco Wan Gateway: 192.168.1.1
Cisco WAN DNS: 192.168.1.1
               71.250.0.12
Cisco Lan IP: 192.168.20.1
 
Edit: I have also tried this connection from a Windows 7 Pro with Firewall enabled and also Windows XP with the same error.
 
Quick VPN log:
 
2011/12/30 00:05:58 [STATUS]OS Version: Windows 7
2011/12/30 00:05:58 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/12/30 00:05:58 [STATUS]Windows Firewall Private Profile Settings: ON
2011/12/30 00:05:58 [STATUS]Windows Firewall Private Profile Settings: ON
2011/12/30 00:06:10 [STATUS]OS Version: Windows 7
2011/12/30 00:06:10 [STATUS]Windows Firewall Domain Profile Settings: ON (code )

View 9 Replies View Related

Cisco Routers :: RV110W QuickVPN Doesn't Work

Mar 10, 2013

I have a problem with my RV110W router. I would like to setup Quick VPN access. Manual is quite straightforward: enable management, create users, install client and that's all, should be working. But NOT. it does not work.
 
Remote Management is enabled on port 8080. Should it be changed to 443 as required for QVPN? Or it does not matter. Is it ok, to have management on 8080 and QVPN on 443?
 
I have tried to connect via QVPN Client ver. 1.4.1.2. Of course ip as well as user and pass has been changed. I tried to change management port to 443, but first:

1. i was not able to access management console at all

2. QVPN - still did not work

View 4 Replies View Related

Cisco Routers :: QuickVPN From One RV220W To Other - No Webpage Access?

Dec 19, 2011

Using QuickVPN from one RV220W to another RV220W I cannot access the Webpage of the remote router.  Goes to "CERTIFICATE NOT VALID" then click through that, and the the login page will not come up.  Sceen flashes a hint of blue background, then turns white, then just sits there saying "Waiting for response from ???.???.QuickVPN will sucessfully connect and I can use all computers behind the router.  Just cannot access the Webpage of the remote router.  I can access the Webpage of the local router.Also, when I hookup using QuickVPN from an "Internet Cafe" that is using a Netgear router.  I can then access the webpage on both remote routers (of course, depending on whom I QuickVPN'd into at the time).
 
Location #1
Office #1
RV220W:  RV220W-A-K9-NA    SER: SER15140314Firmware:  1.0.3.5
IP: 192.168.63.1
 Location #2
Office #2
RV220W: RV220W-A-K9-NA SER: SER151600R2
Firmware: 1.0.3.5
IP: 192.168.2.1
 
I have called Cisco on this with no luck.  They said to update my JAVA.  I am currently JRE 6 Release 30 and still no luck.  The Log files reveal nothing and are darn near unreadable since there is no line breaks in the log file.  Have to manually edit the log to pick stuff out.

View 1 Replies View Related

Cisco Routers :: RV082 - What Is QuickVPN Equivalent For Linux

Dec 22, 2011

I want to connect from a Linux station to RV082, is it possible? What software can I use and with what configuration?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved