Cisco Routers :: RV042 QuickVPN Loops While Verifying Network?

Nov 15, 2012

I used to have the problem where QuickVPN keeps on trying to verify the network because the RV042 cannot get the final ping to the client.I then bought a RV042 HW version 3 on the VPN side and I installed RV042's at the clients as well.This may look like overkill but believe me, it gives peace of mind, it made things a whole lot better, everybody happy.I am going to set up tunnels but for the time being the clients use QuickVPN. The above setup is all good if people access the vpn from the same source.
 
I now have a problem where one of our people is in Vietnam and she cannot access the vpn due to the "verifying network" loop.Looking at the log everything looks great, I compared a successful connect with an unsuccessful one and the logs are identical.The only difference is that the final ping is blocked (recorded in the QuickVPN log on the client side).The client uses W7 with firewall on.No need to repeat suggestions, such as turing printer sharing off, I have been through all that. isn't this simply caused by the ISP in Vietnam blocking pings ?

View 2 Replies


ADVERTISEMENT

Cisco Routers :: Stuck At Verifying Network QuickVPN Client RV 120W - Windows Vista

Sep 15, 2011

I recently installed a new RV120W router at one of my customer's office. I have 2 users connecting using the Quick VPN software.The first one is running on a Windows XP Pro SP3. Everything works great on this PC.The second PC is running on a Windows Vista - The QUICKVPN client stays at Veryfing Network and Eventually I get an error " The remote gateway is not responding. Do you want to wait?I have disabled Firewall on both PCS for troubleshooting purposes.

View 1 Replies View Related

Cisco Routers :: RV042 QuickVPN Not Working For All PCs

Oct 21, 2011

So have a RV042 VPN router that is directly connected to the ethernet port of our comcast cable modem.
 
If I connect to it using QuickVPN (1.4.2.1) from a PC that is connected using AT&T 3G Network it works fine!
 
If I connect to it using QuickVPN (1.4.2.1) from a different PC that is connected using home WiFi (linksys wrtxxx) then it fails. In the VPN log all I see is failure messages for ping.
 
2011/10/22 15:47:28 [WARNING]Failed to ping remote VPN Router!
 
If I open a regular command prompt and attempt to ping the VPN router it works so not understanding why the QuickVPN is unable to ping.
 
how I can troubleshoot this further. Makes me think the RV042 config is fine otherwise it would not work on a 3G connection. Something on the home PC or the home network. Not sure what to check.

View 2 Replies View Related

Cisco Routers :: RV042 - QuickVPN Error

Mar 11, 2012

I've one RV042. I've configured VPN PPTP and it work (I've redirect port 1723 on router1 to rv042). If I can try to use quickVpn, client login and receive error "remote gateway is not responding". I have redirect port 60443 from router1 to rv042. Connection it's this: INTERNET-router1-RV042.

View 3 Replies View Related

Cisco Routers :: RV042 - Login Using QuickVPN

Sep 21, 2011

Today I purchased a RV042 wired router. I set the VPN connection but when I try to login using QuickVPN, get stucks in "Verifying network". I checked the logs:

2011/09/22 20:43:45 [STATUS]OS Version: Windows 7
2011/09/22 20:43:45 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/09/22 20:43:45 [STATUS]Windows Firewall Private Profile Settings: OFF
[Code]...
 
From my side Im connected to a WRT54G2. VPN Passthrough enabled. Windows 7 Pro x64. No 3rd party AV or firewall. Windows Firewall disabled, also tried enabling it.

From the RV042 side it has a Static IP Address configured. DHCP server enabled. HTTPS enabled. UPnP disabled. L2TP disabled.Firewall disabled. Block WAN Requests disabled.

View 6 Replies View Related

Cisco Routers :: RV042 QuickVPN / Gateway Not Responding

Jun 28, 2011

I have router Linksys RV042 v1.2 with latest firmware Version: 1.3.13.02-tm. And I'm using QuickVPN v 1.4.1.2. I've setup VPN connection with values, below: But every time I'm trying to connect to router by VPN it always popup a window "Remote Gateway not responding".It occurs when I'm trying to connect to VPN behind other router, when I'm connected directly to Internet the connection is established.But I'm connecting to other networks using VPN and it's working properly (behind the same router), so I think it's problem with RV042 configuration but I don't now weher.

View 5 Replies View Related

Cisco Routers :: RV042 Configuration With QuickVPN In Windows 7

Oct 1, 2012

I've been working on getting a client to Gateway configuration going for quite some time now.  Had it working with a different Cisco single wan router that failed.  The user replaced the router with an RV042 and we are trying to get the QuickVPN to once again connect to the router as it did before the replacement.  Previously we did connect successfully with Windows 7 clients.
 
Router: RV042 v3 firmware 4.0.4.02-tm Quickvpn version 1.4.2.1
 
what i keep getting in the log is the following :
 
2012/10/02 12:55:07 [STATUS]OS Version: Windows Vista
2012/10/02 12:55:07 [STATUS]Windows Firewall Domain Profile Settings: ON
2012/10/02 12:55:07 [STATUS]Windows Firewall Private Profile Settings: ON

[Code].....

View 5 Replies View Related

Cisco Routers :: QuickVPN RV042 V03 Some Users Connect Others Can't

Feb 10, 2013

A client of mine has a Cisco RV042 Router. I've configured it to run VPN and it works, sort of. Some clients can connect, others can't, for no discernible reason.

Specific machine issues are Windows 7 x64 or x86, Quick VPN latest release, unobtrusive (Avast or Microsoft Security Essentials) security, etc. 2 separate machines on the same home remote network, 1 can connect just fine, the other can't. My laptop (Win7 x64) connects just fine, one of my techs can connect OK, the IT support guy that works for this client can connect.
 
Particulars of the router: Firmware version: v4.0.4.02;  PID VID : RV042 V03;  Firmware MD5 Checksum :     1f84d8d0a2a8b99f9bfa4409e64547aa

View 3 Replies View Related

Cisco Routers :: RV042 - QuickVPN Versus Standard VPN Client

Nov 15, 2011

I have a RV042 router setup with Client to gateway VPN access, and am connecting with a W7 PC running QuickVPN. We have many PC's that already have the standard CiscoVPN client on them, is it possible to configure the RV042 to allow these clients to conenct? I'm not sure how to get the Mutual authentication to work, or how to import the PEM certificiate into that client. It seems to allow it to import, but I can never select it.

View 2 Replies View Related

Cisco Routers :: RV042 - Access Site 2 Resources Via QuickVPN Connection?

Nov 15, 2010

So here is my issue. I have two sites, each with a Linksys RV042 on thier site.
 
Site 1:
External: 142.142.142.142
Internal: 192.168.25.0/24
 
Site 2:
External: 143.143.143.143
Internal: 192.168.26.0/24
 
We have setup a site-to-site VPN between these sites, and all traffic is running back and forth without isse.
 
At Site 1 we have configured the Client VPN for use with the QuickVPN software. Again, for site 1, this is not an issue. We are able to access all internal resources at Site 1 without issue (expect for some DNS related problems).
 
The problem that we have is attempting to access Site 2 resources via the QuickVPN connection at Site 1. Even though they are not suppose to exist, we are able to ping 192.168.26.1-6 (which are ghost addresses likely created by the RV042's) but no actual systems on at Site 2.
 
I have added the Client VPN connection at Site 2, but it has the same problem accessing resources at Site 1.

View 6 Replies View Related

Cisco Routers :: Quickvpn / Client To Gateway Vpn Rv042 Can Only Ping Router?

Jan 27, 2012

I am setting up remote access using an RV042 router.  Using quickvpn or a client-to gateway vpn and shrewsoft client,  I can only access/ping the LAN side of the remote router and one machine on the remote network.  The PPTP server and native Windows 7 connection provide access to all machines on the remote network.I have 2 possible reasons for this and would like to find the real reason:
 
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.

2)  The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.

View 2 Replies View Related

Cisco Routers :: RV220W Verifying Network Doesn't Complete Connection

Jan 10, 2013

We have RV220W at corporate office...intent is to have (5) groups of (3) users each connecting via VPN. Had assumed would be using QuickVPN and have set up users, etc and connections at current locations are quick, smooth, reliable. I have set up (2) locations (6 users so far). However, after 4th connection (no matter where or in what order) client hangs at "Verifying Network" and doesn't complete connection. So, I have unique usernames, etc but each of the (3) at a location are hitting the router with the same IP. Is this the problem? I'm sure the RV220W can handle 15 simultaneous connections, but can the router deal with (3) connections from the same external IP?

View 3 Replies View Related

Cisco VPN :: QuickVPN - Gateway Not Responding - RV042?

Oct 28, 2011

I'm running Cisco QuickVPN on a clients laptop (Windows 7). Windows firewall is disabled because McAfee SaaS is running.I sometimes have the issue that the initial connection attempt comes back with "Gateway not respoding" during the network verification process. You close the program, you open it again and it works. Sometimes it takes 2 or 3 tries. Today I have the issue that my client tried it like 20 times including several reboots and it's just not working. I tried it from my own computer and it connected fine on the 2nd try.I'm thinking that it might be time-out thing, that the VPN client doesn't receive a response fast enough? I know my clients home internet is darn slow.

View 1 Replies View Related

Cisco Routers :: Why QuickVPN Clients Can Only Reach RV042s LAN Network

May 22, 2013

why QuickVPN clients can only reach  RV042's LAN Network and not able to access subnet 1 remotely, however PPTP clients can access both..
 
Firmware Version :  v4.1.1.01-sp (Dec 6 2011 20:03:18)
Working Mode :  Gateway
Multiple Subnet: Enabled 
Device IP Address : 192.168.10.1
LAN: 192.168.10.1/255.255.255.0 
Subnet 1: 172.16.10.1/255.255.255.0
 
QuickVPN clients able to reach all the resouces inside 192.168.10.1/24 remotely, but unable to access 172.16.10.1/24 network.Network 192.168.10.1/24 able to communicatie with network 172.16.10.1/24.PPTP clients able to access both subnets remotely. 

View 1 Replies View Related

Linksys Wired Router :: QuickVPN From BEFVP41 To RV042?

Sep 24, 2006

my office network is running using a Linksys Router RV042 and at home i have a Linksys Router BEFVP41. i'm trying to setup a QuickVPN from home to my office but having problems. both routers have different LAN IPs. the firmware version for my two routers are listed belowRV042 - ver. 1.3.7.4BEFVP41 - ver. 1.02.00?

View 5 Replies View Related

Cisco :: How To Avoid Loops In The Network

Jul 20, 2012

A friend of mine faced an interview, the question is what if there is no STP feature in the switches over the network and what would be the alternate method to avoid any sort of loops?

I guess we can think beyond till layer 3 devices by using some split horizon commands?

View 18 Replies View Related

TP-Link TD-W8960N / Connecting To Wireless Network Loops But No Error Message?

May 7, 2011

My roommate has just gotten a second hand laptop and he's trying to connect it to the Wireless network so that he can browse the internet from his room.However, although all the settings are correct, attempting to connect to the network loops.It comes up showing the Wireless Networks available, I select the network and click connect, it then asks for the encryption key. I enter the key and hit connect again, it comes up with the 'Connecting' pop-up and then loops back to the Available Networks screen again.There are no error messages, it just goes back to the starting screen and it hasnt connected.The Laptop in question is a Lenovo T60 with a Intel PRO/Wireless 3945ABG card.The router is a TP-Link TD-W8960N.

View 5 Replies View Related

Cisco Routers :: RV042 - How To Set Up Network With Netmask /23 On LAN

May 31, 2012

In the company that I'm currently working, we have one gateway with LAN IP address 172.16.0.1 and netmask /23 [=255.255.254.0]. In this gateway, there's a DHCP server providing 510 IP addresses in its pool.
 
I need to substitute the server, replacing it with a RV042. This afternoon, when I was configuring this router, I noticed that it doesn't let you configure different netmasks, since it comes with some of them predefined [starting in 255.255.255.0 and so on], as shown in the picture below:
 
I need to provide DHCP for this /23 network, but it seems that DHCP field cannot assign /23 networks.

View 4 Replies View Related

Cisco Routers :: Cannot Browse Network With Rv042 Pptp Connection

Nov 1, 2011

My network consists of the following:
 
Office-RV042 with static IP ->SBS2003 (10.10.10.5/ 255.255.255.0)
Remote: BEFSR41 with Dynamic -> XP sp3 VPN client (192.168.3.x/ 255.255.255.248)
 
Within the RV042 I have enabled the PPtP server and assigned a user. No port forwarding enabled. All VPN passthroughs and firewall is enabled. DHCP server is disabled.I can establish a connection to the rv042 and ping PCs including the sbs domain server on the office side but am unable to browse any folders. When I attempt to access a network folder located on the office server I am prompted for a username/ password. Upon entering my domain credentials I get an error stating: "the user name you typed is the same user name you logged in with. That user name has already been tried. A domain controller cannot be found to verify that user name"

View 2 Replies View Related

Cisco Routers :: Small Business RV042 VPN Cannot Connect To Network

Jul 14, 2012

I am having difficulty with gateway to gateway vpn on RV042.I have site A and site B, both have static IP address,local IP at site A is 192.168.1.0 local IP at site B is 192.168.5.0I have configured each site as directed in the documentation, the sites connect ok within the admin consoles, I cannot browse any resources from either site. Site A is a domain.local and I am part of that domain at site B. I can ping site B local address from site A and vice versa however I can not ping any of the servers or NAS devices on either network. the only device I can ping successfully inside the network is a phone server (splicecom unit).

I have read various posts in the discussion boards but have found no resolve. Internet access is fine from either site. I think that it could possibly be a DNS issue but am unsure, should I add DNS entries in the advanced section, if so what DNS would I enter?

View 5 Replies View Related

Cisco Routers :: RV042 / Responses From Other Devices On Network Delayed

Nov 15, 2011

I keep getting an error when trying to use the Microsoft Link layer Topology discovery.  It claims there the is either network delays or an incompatible router on the network.
 
Actual error:
 
"Responses from other devices on the network are delayed or there is an  incompatible router on the network"
 
I have 2 RV042 routers, one for each of our network connections. So I am assuming this is the source of the error.

View 3 Replies View Related

Cisco Routers :: RV220W / What Exactly Is QuickVPN

Apr 2, 2012

what exactly is QuickVPN?Is it a IPSec VPN?Is it a PPTP?Is it a SSLVPN?can I resolve my local hostnames? That means, can I configure a lokal DNS Server?

View 3 Replies View Related

Cisco Routers :: ASA5520 And RV042 - Tunnel Get Connected But No Ping / No Traffic Between Both End Network

Sep 13, 2011

I configured ASA5520 and RV042 for site-to-site IPSec VPN tunnel.Tunnel get connected, but no ping, no traffic between both end network.
 
Network:
=======
 192.168.113.0/24----------192.168.113.6 -ASA--------public, static IP address------Cisco 2821--------Internet
 192.168.10.0/24-----------192.168.10.1 -RV042-----public, static IP address------Cisco 2821--------Internet
 
ASA5520 config:
----------------------
name 192.168.10.0 VPN
 !
interface GigabitEthernet0/1
nameif NET
security-level 100
ip address 192.168.113.6 255.255.255.0

[code]....

View 5 Replies View Related

Cisco Routers :: How To Setup RV120W For QuickVPN

Aug 22, 2011

The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?

View 1 Replies View Related

Cisco Routers :: RV120W QuickVPN And Windows 7

Oct 29, 2011

I have been battling with my Cisco RV120W router and QuickVPN.Running Windows 7 Home PremiumPerformed a fresh install to factory out-of-box install for WindowsRemoved NortonDid NOT perform any windows updatesInstalled QuickVN version 1.2.4.1I have updated the firmware to the latest version (confirmed by cisco)I can connet to the router and have a stable connectionI can ping both the router IP and the shared file server IPWhen I enter the shared file server IP into the search field (e.g. \192.168.100.199) and press enter, I see a connection to "share", so I click on this and then see "FolderName" of my shared files. I click on this folder and I get a timed out error.When I enter the routers IP address into a browser (IE8 as factory installed) I get a timed out error also.In the past, I have installed all important and recommended updates for Windows and still get the same scenerioI have called cisco support and went through router settings, assigned them a VPN username, they log in and can access the files without issue (What the @#$$@#$)Cisco support spent plenty of time with me, but since they could access my network and since I could ping my devices, they had no other suggestions further.
 
I have this fresh factor out-of-box install. I know this is most likely something to do with my laptop that I am trying to use to connect to the network. I have Frontier as my ISP for home. I don't know if there is anything they are doing to interfere with my connection. I have tried to connect to the network via ComCast as well, with no luck.tell me if there is something I need to tweak in my Windows 7 settings?

View 11 Replies View Related

Cisco Routers :: Using Remote DNS With QuickVPN - WRVS4400N

Dec 11, 2011

I've deployed a WRVS4400N router at one of my clients, however I'm unable to access resources on his network via DNS. I was hoping to use the router for DNS resolution, however when I connect via VPN, I can only connect to shares via IP address.

View 1 Replies View Related

Cisco Routers :: Cannot Connect QuickVPN To RV120W

Mar 6, 2012

I have a Cisco RV120W connected to the internet. I have configured a QuickVPN user on the router, but I cannot connect via QuickVPN no matter on what PC I try (with firewall or without firewal, Windows XP, 7, ...). On the router it says the VPN user is connected, but on the client PC I receive remote gateway not responding. In the logs it says failed to ping remote VPN router. I tried changing all settings I could find on this forum, but the result stays the same (changed port to 60443, deleted all IKE and VPN policies, allowed ping, disabled fragmented packets etc...). None of all the settings seems to get any result.

View 11 Replies View Related

Cisco Routers :: RSV4000 And QuickVPN Not Working?

Oct 6, 2011

I got a RSV4000 router here with the latest firmware 1.3.3.5, trying to get the quick VPN client to connect.As far configurations go I have under WAN set the IP, subnetmask, DNS1, DNS2 and gateway. And under VPN I have created a client account with a password, created and then exported the Cert to my client PC.But when I attempt to connect, the QuickVPN software hangs for a few moments at "Connecting" and then fails; when the general error.I'm running this on Windows 7 x64.

View 1 Replies View Related

Cisco Routers :: Rv042 Quick VPN Windows 7 Unable To Access Network Shares Or Ping

Nov 26, 2011

I have an RV042 using Quick VPN to connect to a remote network. I have port 1723 forwarded to a static IP address on a Windows 7 Pro 64 bit PC. I can establish the VPN and ping a printer but not the Win 7 PC. I can not acccess any shares on the pc via the IP address. It has Norton Antivirus and Windows Firewall. This remote PC replaced a Windows xp PC that allowed access to the shares. I have tried access with a Windows XP Pro and Windows Vista Home Premium PC. Neither have worked.

View 1 Replies View Related

Cisco Routers :: RV042 / Forward All Packets To Port 9000 From WAN To Single IP Address On Network?

Nov 2, 2011

I have a RV042 using (for now), just the single WAN interface. I am trying to forward all packets to port 9000 from the WAN to a single IP address on the network.  I've set up both forwarding rules under Setup -> Forwarding and under the Firewall -> Access Rules.I cannot connect to my device from the outside world, however.  Is there something I'm missing?

View 4 Replies View Related

Cisco Routers :: RC120W Setup For QuickVPN Connection

Aug 10, 2010

I did upgrade to WiSM from v5.1 to V6 then i see this log %WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost keepalives from Cat 6K Supervisor.

View 6 Replies View Related

Cisco Routers :: QuickVPN To RV082 No Longer Stable

Sep 11, 2011

I have a RV082 in the corporate office, and several remote people connecting to it using QuickVPN through a variety of clients (XP and Windows 7).  As of today, they are all now seeing the "Remote Gateway is not responding - disconnect or wait" message.  Checking through the logs on some of the remote clients, I see the "Failed to ping the remote router" message several times, followed by the "Ping was blocked, which can be caused by an unexpected disconnect." message.
 
The odd thing is that everyone has been running very well over the past 2-3 weeks - most people with 8+ hours of solid connectivity.  We made no changes to the clients, nor to the remote router in the corporate office.

View 3 Replies View Related

Cisco Routers :: RV220W QuickVPN Limited To 10 User Instead Of 25?

Oct 11, 2011

I just bought a RV220W for my small company. I have read everywhere that this model come with 25 license for QuickVPN/IPsec.But when I tried to create all my account I had a bad surprise. The firmware tell me that the maximum number of user that I can create is 10! I dont see anywhere in the firmware where I can upgrade for another licence. I have the last firmware.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved