Servers :: IP 169.254.0.1 Not Detected By Ping On Computer
Sep 22, 2012Hard Drive (Gembird not detected on My PC
View 3 RepliesHard Drive (Gembird not detected on My PC
View 3 RepliesI stream movies from my computer to my PS3On my playstation it shows Windows Media Player from two seperate computers on the network but not mine.So it is an issue with my particular computer/setting and not necessarily the router or the PS3 I obviously tried the program I always use (Vuze) which did not work, and then I downloaded PS3 Media Server and that did not work.The programs do not recognize my PS3 and vice versa I use Symantec Endpoint as my Virus Protection and turned it off, so i believe this is not the issue....but im still skeptical of it due to that is the only thing that has changed since it last work (I reinstalled it)
View 2 Replies View RelatedI have a an HP Pavilion dv6000t notebook running Windows Vista.I have a wireless router at home and connect to the wireless signal using both this computer and my other computer that I use for work. Yesterday, out of the blue, my laptop stopped connecting to my home wireless signal.It detects the signal, but when I click on it to connect (something I shouldn't have to do, as it is configured to connect automatically), I get a message saying that it couldn't connect and suggests that the signal strength is low.I know that the signal strength is fine as I am connected just fine on my work computer.I can plug my laptop into the router using a cable and it connects just fine that way, so the only problem is with the wireless signal. I have restarted the computer, modem, and router, to no avail.
View 3 Replies View RelatedI recently upgraded my computer (not laptop) from Windows XP to Windows 7-32 bit. I redownloaded and installed Network Magic, Linksys Wireless Manager and my WUSB600N adapter properly (I hope). Now everything was working fine, I was able to get onto my network through the adapter but today I noticed that the Linksys Wireless Manager seemed to not connect to my network, instead my computer some how did it without the wireless manager. Now when I tried to connect to a network through the Wireless Manager it said Error: 211 and said My Adapter may not be installed properly and told me to remove the adapter and attach it back after 20 seconds. I tried that but again my computer connected to the network STILL through the computers own manager not through the Linksys Wireless Manager. That was still saying Error 211. So the problem really is that the Linksys Wireless Manager wont detect my adapter but my computer is still able to detect it and connect to my network.
View 4 Replies View RelatedI just got a WAG160N-au, I run the installation disk, follow the procedures. I got the internet connection.
View 9 Replies View RelatedI Have 15 computer and they all are in Internet Connection.And I Have Network of C class that is 192.168.5.11.But the main Problem is that the computer are not getting ping with each other.How can I get them Pinging between them.Can any antivirus stop them?
View 1 Replies View Relatedtwo of my workstation can not receive ip address from the server but can ping server. So i can not browse with them
View 3 Replies View RelatedThe DNS comes request timed out while pinging and i am unable to browse. But the Same LAN cable is working fine in another pc. I can ping the Gate way. But not able to ping DNS.Local Network is working fine.
View 1 Replies View RelatedI saw a strange beaviour in the ACE30 today.We are configuring most of our VIP:s with "loadbalance vip icmp-reply active" and I haven't thought about it that much.I just assumed it would do what the command says.Today an Intel tech called and said that he had taken down the webservice on port 80 on both servers in a serverfarm and he could still ping the VIP.I had a look in the ACE and saw that the VIP was marked OUTOFSERVICE. But he could still ping it at that moment.What is the criteria for the VIP not to respond to ping with the above command set?
View 5 Replies View RelatedI have a cisco 5505 and am trying to configure it with ASDM 6.4.
My vpn client connects ok to the network but I am unable to reach any of the servers.
I'm sure its a simple configuration issue as I don't have much experience with Cisco configuation.
I have two computers. In my first computer Linux operating system its a domain controller and in my second computer server 2003 operating system. In server 2003 I have my oracle database back end. The problem is that oracle is two slow and users are very disturbed it means I have installed front end of oracle in my clients users of domain. Now I am facing the issue of slow down of oracle. It will take a long time to perform a little activity. I have already gave heat and Greece to its processor, but it doesn't work. What should I do?
View 1 Replies View RelatedPut bluntly, my laptop will not connect to any ftp site/server via any of the following methods:Command Line Software FTP Clients (Filezilla and other such programs) Windows Explorer (window) Browsers
However, if I try to use a WEB-BASED client, I am able to connect without a problem. What's stranger, if I try to connect to the same server on a different computer using the same wireless network (I'm running on Wifi), that computer has not problem connecting to the FTP server via all the methods mentioned above. So that should at least eliminate the wireless network itself from the list of possibilities.
And to the best of my knowledge it has nothing to do with the firewall as I've made every possible setting tweak to allow ftp connection in and out - I've even turned off the firewall and antivirus with no luck.
Which is why I have reason to believe it has to do with my laptop itself.
I am using the window server 2008 and configure tcp/ip properties correct ping locally reply successful when ping localy but when ping yahoo.com then reply destination host unreachable whereas gateway and dns ip is also correct configure so tell me solution about this problem because i am useing the internet.
View 1 Replies View Relatedlast week I installed a new router (2911) in my network.We had to create two different VLANs for the new setup to work as wanted.I have a Windows 2008 R2 which is a Domain Controller for Active Directory on the ip address 192.168.0.195.That server (HP DL180 G6) has two NICs. One has the above IP address and the other one has 192.168.0.199.
On the other VLAN, I have a server, running the same OS, that I want to re-join, as it formerly was, the AD on the first server (192.168.0.195). This server has the new IP address 192.168.10.194.All these are connected to a Cisco switch SG 200-50 Gigabit Smart Switch. That one is connected to a Cisco 2911 router.
The problem is that, once the old 192.168.0.194 got to be 192.168.10.194, the 192.168.0.195 can't ping it anymore... At least not all the time... Sometime it works, sometimes not... Neither can't the 10.194 ping the 0.195 all the time. When one way works the other one doesn't... When one pings the other one successfully, the other one can't...
I have installed quite recently a cisco ASA 5520 replacing a linux based firewall I have only 2 zones ..one is internal netowrk and other external the internal network has web servers, dns and mail server all having public IPs Every thing is OK but i have seen that if I try to ping an external server for example [URL] i cannot ping says
[sylvan@kmdns1 ~]$ ping www.yahoo.com
PING eu-fp.wa1.b.yahoo.com (87.248.112.181) 56(84) bytes of data.
--- eu-fp.wa1.b.yahoo.com ping statistics ---
6 packets transmitted, 0 received, 100% packet loss, time 5010ms
but I can ping from systems which are outside my firewall perfectly with the linux firewall i had before i could ping perfectly to yahoo from any of my internal servers?
I have two server computers. there IP addresses are:
1. 192.168.0.99
2. 192.168.1.99
Now, how to configure it for accessing data from each other?
i have configure Webserver IIS on windows server 2008 i can access it on same computer i configure it but i can't access it on another computer
View 2 Replies View RelatedMy computer at work crashed so I had to reinstall windows 7.When it was working properly I was able to connect to our main server computer. After the reinstall I am able to connect to the internet however I am unable to connect main server computer. Usually, before it crashed, the server would automatically show up in the networks folder. Now all I can see it my computer and not the server computer.If someone knows how I can get my computer connecting to the main server I have tried everything and nothing is working.The main server computer it Windows XP and my computer is Windows 7.
View 4 Replies View RelatedI am connected but always have the red cross up in the connection tray
View 1 Replies View Relatedmy computer losses its internet connection when it goes to sleep and I have to reboot my computer. Could my network card be faulty.
View 1 Replies View Relatedi have an internet connection thru USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible.
View 1 Replies View RelatedOne of the computers at my office died and needs to be replaced. I need to get the new computer set up with an existing user account so that the user can access email and public drives. The new computer is running windows 7 professional.Our server is running SBS 2008.
View 5 Replies View Relatedhow to connect a adsl modem to a computer network using a switch with a server.I have a network with a server and about ten clients computers all connected through a switch, the server has an IP 192.168.1.1 as its gateway. I want to connect adsl modem to the switch so that all the computers can have access to the net, but the adsl too has 192.168.1.1 as its IP.
View 1 Replies View Relatedyour computer could not be joined to the domain because the following error has occured,access denied,this error is happening when i create users for active directory users and computers in windows server 2003,i have 11 computers ,,1 server and 10 clients,,i created 10 users in active directory users and computers ,,until here i have no problem,,but when i want join client computers with server it is happening this error(your computer could not be joined to the domain because the following error has occurred,access denied)i can join 3 client computer with the server in fourth computer it happening that error,what can i do?
View 9 Replies View RelatedDisable Prompt for password when computer resumesfrom standby for win 2003 serverunder
View 1 Replies View Relatedi need to know when a computer shutdown. Is a windows xp. Is in another domain. I cant use VPN.somebody knows a software that alert me (example: by email)?
View 2 Replies View RelatedWhen I first set up the Zone based firewall I used the Wizard with a setting of "low".The issue I am now having is related to adding a new subnet on a completely different IP range. My normal network is 10.20.0.0/16 sub-netted down into /24's for each vlan.Recently I added a new VLAN with a 172.16.0.0/16 subnet. I plan to use this vlan for testing purposes. I updated NAT on the router to allow the 172.16.0.0/16 range to be NATTED.From the router I can ping anything on the 172. 16.0. 0/16 range and from a test machine in the 172.16.0.0/16 I can ping all of the 10.20.0.0/16 addresses including the router.My problem is I can not ping out onto the Internet from a 172.16.0.0/16 computer.I have checked and so far I have not been able to find any policies on the firewall saying traffic must be sourced from the 10.20.0.0/16.
View 8 Replies View RelatedWhenever my sister uses her laptop it makes the routers ping really unstable. It usually lies between 200-1000 when she uses the laptop. When she turns it off the ping remains at 21. Our internet is 8mbps/0.7mbps. I have tried other laptops and had no problems, but her laptop and her general use makes it impossible to play an online game without lagg. She doesn't download anything, just plays some flash/java games, chats and webcam etc. I just can't understand why the ping becomes so unstable when she uses her laptop.What can I do to make the ping more stable? Any software I can install to limit how much ping she uses or something? Something I can buy to split the line between us or anything like that? Software that checks what she is doing that makes the ping unstable? She just had a few programs and chrome up and still ping was unstable. None of the other laptops in the house behaves this way nor any of the desktops. It also makes web pages load 5 times slower?
View 1 Replies View RelatedHow can i enable this machine to be accessible throught PingTracert
View 1 Replies View RelatedMy computer will connect to the home network but won't connect to the internet or pass the ping test.
View 4 Replies View RelatedI connected to AP 1552E and my computer via PoE Gigabit Ethernet Port. Port is up and two of them are the same subnets.Even if my computer and ap arp table seen each other but i couldnot ping the each of them. [code]
View 4 Replies View RelatedFor some reason I cannot ping or FTP on a specific computer on my home network. All other computers work fine and the specific computer works fine on other networks. But the combination of this computer and my home network it doesn't like.
I have disabled both windows firewall and my virus software but nothing seems to work. It seems to be a timeout issue as FTP and ping sometimes does work but FTP is increadibly slow when it works and the ping time is very high 670ms and above. I am running windows 7 and my router is a netgear n150
I have 2 modules of FWSM in 6500 switch (failover).I need 5 context.When I use in routed mode (like in the picture) , I cannot ping the servers behind the firewall. (I have ping to FW context),In transparent mode, it is not happening.what is the problem with routed mode?
View 1 Replies View Related