We have 2003 Domain With Active desktop enable for client.Problem Is who ever loging in to my domain they are getting desktop icons in blue color.i have check these but no result
1}My computer properties-advance- performance
2} desktop right click -arrange icons -lock web items on desktop
3} i have checked with display properties.
I use server 2003 in my netwerk now I change the users computer from XP to windows 7, how can i set the icons on the users desktop in windows 7.
View 1 Replies View RelatedI got a strange incident happening to my work computer. Whenever i step away from my desk and come back only to find Icons of files mapped to other network drives other than my local drive have disappeared from desktop. I have to restart my computer to get these back. It only happens when i have walked away from my PC and I have verified that no one has sat at my desk to use my computer while I'm away. The other PC are also networked to the same servers as mine and theirs are not affected at all.
View 1 Replies View RelatedIs renewal charges of hardware firewall is high?I want to buy the hardware firewall for my office were about 20 comp are there and i heard that its renewal is very high is it true. i can spend rs 40-.50 k for firewall but it tough for me to pay renewal of 20 k every year, is this much high renewal i have to pay/
View 1 Replies View RelatedThe other computer running XP connects to the server through remote access but the one running windows 7 does not
View 1 Replies View RelatedRemote Desktop can't connect, so I've got four servers in the same LAN. Whenever I try remotly access the web server, the message (Remote Desktop can't connect to the remote computer for one of these reasons: 1. Remote access to the server is not enable. 2. The remote computer is turned off. 3. The remote computer is not available on the network) The thing is that I can connect to all servers with any desktop computer in the network, but when I try to do it in my laptop (that is connected to the same LAN) I've got access to the other servers but not to the web server. Sometimes I had to restart this server and works fine for a little while.
View 1 Replies View Related"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, outer...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work. All I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.
View 1 Replies View Relatedhow to uninstal remote desktop connection, computers are networked
View 1 Replies View RelatedI formatted my dell 8300 desktop but now I cannot hook up to the internet, there is no local area connection icon. Not sure what I did wrong or what to do to be able to install.
View 2 Replies View Relatedwindows server 2003,ISA server 2000 Networking :: Connecting ubuntu desktop?
View 1 Replies View Relatedhow do I enlarge the icons on the left ?
View 1 Replies View Related[CODE]My current problem is the internet just isnt working right. It is slow, choppy at times or doesnt load all items on a page. If it doesn load a page sometimes I click on the stop X, followed by refresh and the page pops right upSometimes if I dont get a complete page a refresh will fix it. It is just a pain to work with.There is an Network Connection icon in the right corner of the task bar. It is two small blue screens. It keeps changing from a red x, an exclamation point, and three blue balls or nothing. If I rest on the icon it flashes the status of the network:[CODE]
View 12 Replies View RelatedI'm having sporadic trouble with both Google Chrome and Internet Explorer 8. The first thing I noticed was that the icons on my bookmark bar are wrong. The CNN icon make actually be Amazon and Twitter may be Webster's Dictionary. Sometimes, for example, CNN won't come up at all and then it will display later. Many websites will intermittently come up without graphics and in a plain font.I have done restarts and cleared browser histories and checked extensions. I have performed cleaning with Winferno and McAfee comes up clean
View 3 Replies View RelatedAll network icons missing after running, spybot.In device manager/advanced - wirelss remains off, even after selecting 'wireless on' after selecting wirless on, and closing box, when I open the advance settings, wireless is off again
View 1 Replies View Relatedwhere is the WEP located on my att Motorola router?
View 1 Replies View Relatedhow do i connect my dvr to a router that is in another room is there a way i can do it wireless
View 1 Replies View RelatedI want to use clientless webvpn to connect to the inside TSWeb on the win 2000 server.From the inside the TSWeb works normaly, user logs in to the TSWeb site and then click on the application icons that want to use as remote applications (OUTLOOK, EXCEL, etc).From the outside through webvpn the credentials are posted to the TSWeb site, the user logs in correctly, but on the site the applications are not clickable, there is no buttons just the icon and the name of the remote app.What could I change on the TSWeb server?The ASA version is the 8.2.4, and the TSWeb server is IIS win 2000.
View 4 Replies View RelatedWhere can you find the security key in a wireless router
View 18 Replies View RelatedI am renovation my own house, and I have started to hard wire for the network/s, but I am also trying to incorporate so much more than any previous “wireless” setup I have had, well I am a bit confused to say the least.I would like to set up a home network and media server system which includes:Internet browsing (multiple rooms and wireless) File sharing, printer sharing, scanner etc Music/Video sharing/streaming, TV etc.I have started wiring (we are renovating) with Cat5e, and have just replaced the old POTS (telephone) wiring with Cat5e and taken the individual telephone wires (including the incoming telephone cable) back to one central connection unit in a network patch panel. This has improved the speed of my DSL download connection speed from 1.2mbs to 6.2mbs. unreal!, so that did get me a bit fired up!I am currently wiring data points (Cat5es from each room) back to the same panel, but to be honest I am not really sure where to go from there! Also, I have wired Sat cables back to this point ready to be connected to sat TV (dish) in case if we get it. This patch panel is in a small passageway that goes through to the garage from the house. It is conveniently located next to the mains board which I have just replaced. My original idea was to put any extra needed equipment in the same location, but looking at it, I think that I may have to think again, for there is little room. I have found a small alcove in the upstairs games room which has a shelf, and which could take any hardware, also it will be dust free (unlike the place leading to the garage). I can run as many cables as needed from this location to the patch panel, but obviously I would like to know how many, as I am not familiar with networking on this scale, my only other experience being wireless setups. For example, would the switch need to be located where the patch panel is, or else can it be on the shelf with the other stuff? (away from the panel), and the existing D-link 4 port router?? is this no longer required?Im presuming i will need an old PC or some sort of media storage device here too... no ideas with this either. Have tried asking three different computer stores, got three different answers...?!
Have I dropped a clanger wiring to the passageway, when infact any server/switch or whatever wont be in the same location?Also, I am planning on getting a MAC book, and would like to use this on the system sometimes (might not be relevant), just thought to mention. And, I was thinking of trying Linux, as I am fed up with all the windows problems. But not sure if that is a good idea either.We have TVs in the (when its finished) media room, also three other areas, which I would like to get connected so that they will be able to get either TV or watch a film from storage wow this is getting complicated and if it matters I do have a PS3, which we only really bought to use as a TV storage system/recorder.
I have tried numerous times to install the disk and the adapter, but it always says it cannot locate the adapter. I know that the ports (I have tried them all) are working properly because they have been in use. I tried the chat. He suggested I call the 1-800 number. I don't have time to wait on hold forever, which I did anyway until I finally hung up.
View 5 Replies View RelatedI was wondering if i can create (a) bookmark(s) of resources which are located behind a particular Site-to-Site VPN?We are using a Cisco ASA 5510 (9.0.2) with SSL VPN configured. The tunnel is up but when i try the bookmark, i get the error "server unavailable".
View 2 Replies View RelatedI want to use the flexconnect in the same network where the wlc is located. Normally we will do it for over WAN and branch office. But I want to use in the same main office to avoid more bandwidth utilization on my distribution layer. Wlc is connected on Distribution switch.I want to do local switching in the access layer switch.
The below is the sample topology. But real topology contains nearly 200 AP's(3600 series) and 20 access switches and so on.....So there is a chance of 200 AP * 350 Mbps can flow on the distribution layer.So ,
1)If I use flexconnect any issues will be occuring?
2)Does it cause any impact on VOWLAN?
Where I can find the visio icons for the cisco 3508, 3524 and 3548. They are NOT on the cisco visio icon download site.
View 3 Replies View RelatedI am having difficulty getting my HP Officejet Pro 8500(A910) configured to save digital faxes to my Iomega 2TB Home Media Sever (cloud edition). My home network is setup through a Linksys E4200.I was able to successfully configure it to save to a folder on my PC, but I do not want to leave it running 24/7.I believe the breakdown is in the Authentication part of the setup... It asks for the Windows username and password, which works fine for the PC setup but not for anywhere else. Do I use the UN & PW for the home media server if I'm saving to one of its folders? If so, how do I correctly type the path? It is communicating with the folder and leaving an alphanumeric file saved inside the folder when I use the 'save and test' option, but it breaks down from there.
View 1 Replies View Relatedwhy my router will not synchronize with an NTP server located an off-site facility; the NTP server is located at the Naval Observatory. I have a Cisco 7200 VXR IOS 12.4 The clock and calendar both are set correctly.
View 2 Replies View RelatedWe have an Asterisk/FreePBX phone system located behind an ASA 5505 device where we are having problems with sip inspection.
We connect to three different phone providers, and things works as expected for 2 of the 3 providers,but for the last one (Draytel) we are having problems with sip inspection.
The key difference about the VoIP provider where we are having problems is that they are using differetn servers for the voice (RTP) traffic than the server we are registered with to establish SIP sessions.
sip inspection is configured with the default out of the box options.The problems we see are this:
1. For ingoing calls sip inspection does not open the required pinhole to allow the traffic to flow through. As a result we can not hear the voice of the calling party, but voice from our side is passed through ok.As a workaround we have added and ACE allowing traffic in the used UDP (RTP) range from this VoIP providers ip addresses to pass through the ASA, and with that in place incoming calls work.
2. Outgoing calls doesn't work because sip inspection doesn't kick in, and as a result of this we forward internal ip addresses in the SIP / SDP body to the VoIP provider. I'm not sure whether this is a consequence of sip inspection not kicking in for this provider, or a result of having added the ACE for an ip ragnge that covers the ip address we register with.
As stated above sip inspection does work as expected for two other providers where all traffic goes through a single server.We actually have had this working with ASA firmware 7.2(4), but as that version intermittently had a problem where sip inspection would stop working (fixable by power off/on or a clear command), then we decided to upgrade.
i want to know more about cable testing color coding
View 1 Replies View RelatedI was trying to make an Ethernet cable about 100 feet long and what I found; it was not working in non-standard color scheme. However it works fine when re-arrange its color combination into standard, (Same cable, only color difference).So, why this Color scheme is important? And what is the secret behind its color combination?This is Standard Color Scheme for Ethernet.
View 3 Replies View RelatedI need to install laserjet1025 color printer in my PC.
View 1 Replies View RelatedI have a new Cisco DPC 3010 modem and the link light keeps turning a amber color. When the light goes from green to amber my download speed drops from 12m to 8m and my upload goes from 2m to 312k. I cant find anything on what the light turning amber means. Also cant find out how to log into the modem.
View 0 Replies View RelatedI am facing issue with LMS 4.0. The Core Switch is showing in RED color,and device type as UNKNOWN. It was working fine but some how it is showing this problem.
View 14 Replies View RelatedI was using my internet on my Acer Windows 7 operating system wireless just fine on Monday. I tried to use it on Tuesday and could not connect to the internet wireless any longer. I get an error message next to my network stating ""The settings [COLOR=green ! important][COLOR=green ! important]saved[/COLOR][/COLOR] on this computer do not match the requirements of the network"I have never encotured this kind of problem before. I proceeded to call Comcast who did all kinds of trivial beginner troubleshooting such as restart the router, restart the modem turn on and off the computer.
View 3 Replies View RelatedCan't get my printer to work. Bought a black ink do we have to have colored ink aso? It's a hp photosmart-D110a.
View 1 Replies View Related