I was trying to make an Ethernet cable about 100 feet long and what I found; it was not working in non-standard color scheme. However it works fine when re-arrange its color combination into standard, (Same cable, only color difference).So, why this Color scheme is important? And what is the secret behind its color combination?This is Standard Color Scheme for Ethernet.
View 3 RepliesI have Cordata 5e cable and noticed the wires inside are not the typical wire colors ie:green/ white. The colors of wires are all solid ie: green, yellow, tan, pink, etc...
View 1 Replies View RelatedI just installed windows 7 into my computer and I need to verify my copy of windows. I tried connect my Ethernet wire from my computer to the wireless router but it's not connecting or registering. The wireless router is a WRT54G and I can access the device ip for it but I don't know how to assign an IP address for the new computer. I already had a computer (wired) and a laptop (wireless) connected to the router. I'm using a straight trough Ethernet wire Doing the steps in the sticied post below didn't work because typing ipconfig /release didn't work?
View 5 Replies View RelatedI have created a username and password with command username Cisco privilege 15 pass Cisco. when i telnet to switch it ask me for enable secret password?????? though i have specified a privilege level 15 to a user.Switch is authenticating with ACS and i have specified a privilege 15 to a specific user on ACS.The IOS is c2960-lanbasek9-mz.122-55.SE.
View 14 Replies View Relatedim having confused with those command "username (username) privilege (0-15) secret 5 (word)", what should i put into (word) part ?cause when i tried to put a "cisco" an error comes up. "privilege" command function and how that commands work?
View 4 Replies View RelatedGetting the following error when trying to Authenticate.Check whether the Shared Secrets on the AAA Client and ACS Server, match. Ensure that the AAA Client and the network device, have no hardware problems or problems with RADIUS compatibility. Also ensure that the network that connects the device to the ACS, has no hardware problems
Where in the settings on the Cisco ACS 5.2 Appliance can you verify/change the shared secret?
I have been assigned to create a basic IP Addressing Scheme. The company has a single class B private address range of 172.16.11.0/16 and it needs to be divided into four subnets. They are all based on a single router.
Subnet A: 500 hosts
Subnet B: 200 hosts
Subnet C: 50 hosts
Subnet D: 20 hosts
How can I subnet them correctly and how would I make an addressing scheme for each subnet? (Host range, server, peripherals, gateway address? etc.)
I'm doing something in class where I have to define a ip addressing scheme for multiple buildings in what im guessing is a campus lan. I understand how to subnet, but was never taught how to put it into practice. I'm having trouble grasping the creation of a network for: multiple buildings(4) with 3 levels/floors each, housing around 2000 students and 400 staff, all needing to access the network in each building.The main hall houses the data center on the first of 4 levels.
View 7 Replies View RelatedWe currently have a distributed PR and DR ACS 5.3 setup, set up with tacacs devices and one radius device.The radius device is used Opnet's AppResponse Xpert Admin. We are trying to intergrate AppResponse Xpert Admin with ACS.
The GUI for AppResponse Xpert Admin is asking for the radius server ip address - i.e our ACS , radius port - i.e 1812 and "secret" - I'm guessing this means the shared secret of the actual ACS itself (not the shared secret used by network devices) .
On our ACS 4.2 systems we have a field for a shared secret regarding the ACS server itself (to authorise replication?).
Using the search function for "Shared Secret" in pdf "User Guide for Cisco Secure Access Conrol System 5.3" has only found references to setting one for network devices and not a field for the ACS itself.Is a ACS server shared secret still relevant for the ACS 5.x system?
I have a cisco 2801 router, My ISP in which i receive my bandwidth from has assigned me a ip address/gateway etc for my FA0/0 from our Telco switch. I need to figure out how to bridge through the public ip scheme they are issuing me through FA0/1 (setting up a transparent bridge) so in example if i was givin 192.168.1.189 on a /30 network for my router (assigned to FA0/0) how to i set it up to bridge through the publics?
View 9 Replies View RelatedI was wondering if an interface numbering scheme is available for the 6509-E switch equipped with SUP-2T and includes 16Port X 10GE DFC4, 48 x 1GE SFP and RJ 45 line cards. Would like to understand:
How the slots are addressed
Interface Addressing
On board SUP-2T 10G and 1G port addressing
how the Cisco VPN works, as i already have a post on here about not being able to connect an android device to my firewall, i am now struggling to get an Iphone 3gs iOS v4.3 (8F190) connected to the VPN Either.I have checked the Network (client) Access settings on the firewall, and confirmed the group names im after including the protocols it supports L2TP is Disabled so it looks like i can only connect via IPsec.so i fill out the required details in the IPhone but keep getting a message back from the phone
"The VPN Shared Secret is incorrect"
Now im sure i have this right as i use the same details on my laptop which connects to the VPN perfectly fine. but i am starting to bang my head against the wall, no matter what i try and do i cannot seem to get either device to connect to the firewall.i have a pair of ASA 5520 boxes running cisco software 8.2
I change DHCP scope to match corporate IP scheme Friday came back To discover only some stations picked up new leases from the scope.
View 2 Replies View RelatedI have access points deployed across several buildings that each have a different IP scheme and their own T1 line. Is it possible to configure the 5508 controller to allow these access points to use the IP scheme assigned for that particular building or will dhcp always assign an IP address to the connecting client based on the IP scheme of the building that the controller resides in?
View 1 Replies View RelatedRecently I came across a router (Cisco 3845, IOS 12.4) configured for TACACS, one local username and an enable password. Going through the configuration I noticed the router didn't have an enable secret password which I thought was strange. The TACACS config is below, comments regarding the TACACS config and the consequences of not having an enable secret or if there is a need for one.
aaa authentication login default group tacacs+ aaa authentication login no_tacacs enable aaa authorization exec default group tacacs+ aaa authorization commands 1 default group tacacs+ aaa authorization commands 15 default group tacacs+ aaa accounting exec default start-stop group tacacs+ aaa accounting commands 1 default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+
I was wondering if a interface numbering scheme is available for the 4900M. Configuration includes 1 x 8Port 10G and 1 x 20Port 1G modules. would like to understand How the slots are addressedInterface AddressingTwinGig interface addressing
View 10 Replies View Relatedi want to know more about cable testing color coding
View 1 Replies View RelatedI need to install laserjet1025 color printer in my PC.
View 1 Replies View RelatedI have a new Cisco DPC 3010 modem and the link light keeps turning a amber color. When the light goes from green to amber my download speed drops from 12m to 8m and my upload goes from 2m to 312k. I cant find anything on what the light turning amber means. Also cant find out how to log into the modem.
View 0 Replies View RelatedI am facing issue with LMS 4.0. The Core Switch is showing in RED color,and device type as UNKNOWN. It was working fine but some how it is showing this problem.
View 14 Replies View RelatedI was using my internet on my Acer Windows 7 operating system wireless just fine on Monday. I tried to use it on Tuesday and could not connect to the internet wireless any longer. I get an error message next to my network stating ""The settings [COLOR=green ! important][COLOR=green ! important]saved[/COLOR][/COLOR] on this computer do not match the requirements of the network"I have never encotured this kind of problem before. I proceeded to call Comcast who did all kinds of trivial beginner troubleshooting such as restart the router, restart the modem turn on and off the computer.
View 3 Replies View RelatedCan't get my printer to work. Bought a black ink do we have to have colored ink aso? It's a hp photosmart-D110a.
View 1 Replies View RelatedI am getting 22-30mbs down through my router wired and I'm only getting about half of that through wireless. Is this normal? I also have a question about the color of the internet led. The online manual says that it should be blue, but mine is green. All of the other LEDs are blue except the internet one. Not sure if that is an issue or not.
View 1 Replies View RelatedWe have 2003 Domain With Active desktop enable for client.Problem Is who ever loging in to my domain they are getting desktop icons in blue color.i have check these but no result
1}My computer properties-advance- performance
2} desktop right click -arrange icons -lock web items on desktop
3} i have checked with display properties.
how to change the IP Address on a Dell C3760dn Color Laser Printer?
View 4 Replies View RelatedWe have deployed many 1142 APs on a site.When i have checked color codes , some of thems LEDs are static green which we have expected.But some of them are not giving out any light.But from the controller menu i saw them active and operating. And i can connect that APs but no led is lid.
When i get closer to the AP i saw a Red color which can not be seen from distance (Not Red flashing LED).What the possible error can be ? Is it a factory default mistake or so ?
i have an internet but my f7d6301 v1 not working ...the device flush red color instead of green
View 1 Replies View RelatedI don't know how to stop my internet pages from showing purple color on links that have gotten clicked before
View 7 Replies View RelatedMy Internet Explorer will not save settings/changes to highlight color of viewed pages in search results. It will not highlight search pages that have been viewed at all. I have Internet Explorer 9 & Windows 7 - 32 bit on a Dell Inspiron 1545. I have uninstalled & reinstalled Internet Explorer 9. Above mentioned application did not work on either Internet Explorer 8 or 9. I have cleared all cookies, deleted all temp. internet files, optimized disc space twice & done a Full scan w/ my Norton. I go to color setting under Internet Explorer make the changes & hit each "OK", but the changes don't take. The "Apply" button is recessed and is not functioning. This has been the problem for approximately the last week and 1/2, before that color highlighting function was working. This color highlighting feature of viewed pages does work in Mozilla fire fox, but that is not what I want to use.
View 1 Replies View RelatedI have an HP 6500 that is connected, wired, to our Dell desktop and wireless to our Mac laptop. The color is great on documents from the desktop. However, if I print a document from Word on the Mac the colors are faded. I can print a picture from the picture folder and the color is accurate. It seems the colors are only poor when printing from Word. THis is a major problem since I build ads using Word.
View 1 Replies View Relatedis there a way connecting the HP Color Laser jet CM1312nfi MFP totally wireless without any cable? how can it get the IP wireless?
View 1 Replies View RelatedMy parents took the modem from the inside of my room to use it on their WEAK computer in their room that they RARELY USE. And even though i can give them a wireless usb they say they wan't it in THEIR ROOM. so ofcourse it pissed me off that my 8 core 8 gig rig would have to resort to wireless but whatever. We have a 2wire740 box from at&t. This one to be exact. url...My question is can i use the Clear modem and plug it into the 2wire740 so that it can broadcast for me to be able to still get internet ?
View 2 Replies View RelatedCan I replace my AT&T 2 Wire with any DSL Modem? We get terrible wireless response in rooms not close to the modem, I don't care what the additional cost is, I just want to use my laptop throughout the house, including my basement.
View 4 Replies View Related