im having confused with those command "username (username) privilege (0-15) secret 5 (word)", what should i put into (word) part ?cause when i tried to put a "cisco" an error comes up. "privilege" command function and how that commands work?
View 4 RepliesHow do I set my network key in Microsoft Word 2010
View 1 Replies View RelatedI have created a username and password with command username Cisco privilege 15 pass Cisco. when i telnet to switch it ask me for enable secret password?????? though i have specified a privilege level 15 to a user.Switch is authenticating with ACS and i have specified a privilege 15 to a specific user on ACS.The IOS is c2960-lanbasek9-mz.122-55.SE.
View 14 Replies View RelatedI was trying to send a word document via e-mail I put the wrong information and now I cant fix it.
View 1 Replies View RelatedGetting the following error when trying to Authenticate.Check whether the Shared Secrets on the AAA Client and ACS Server, match. Ensure that the AAA Client and the network device, have no hardware problems or problems with RADIUS compatibility. Also ensure that the network that connects the device to the ACS, has no hardware problems
Where in the settings on the Cisco ACS 5.2 Appliance can you verify/change the shared secret?
We currently have a distributed PR and DR ACS 5.3 setup, set up with tacacs devices and one radius device.The radius device is used Opnet's AppResponse Xpert Admin. We are trying to intergrate AppResponse Xpert Admin with ACS.
The GUI for AppResponse Xpert Admin is asking for the radius server ip address - i.e our ACS , radius port - i.e 1812 and "secret" - I'm guessing this means the shared secret of the actual ACS itself (not the shared secret used by network devices) .
On our ACS 4.2 systems we have a field for a shared secret regarding the ACS server itself (to authorise replication?).
Using the search function for "Shared Secret" in pdf "User Guide for Cisco Secure Access Conrol System 5.3" has only found references to setting one for network devices and not a field for the ACS itself.Is a ACS server shared secret still relevant for the ACS 5.x system?
I was trying to make an Ethernet cable about 100 feet long and what I found; it was not working in non-standard color scheme. However it works fine when re-arrange its color combination into standard, (Same cable, only color difference).So, why this Color scheme is important? And what is the secret behind its color combination?This is Standard Color Scheme for Ethernet.
View 3 Replies View RelatedI have a cisco ASA 5505 . I need to store " show capture 'word' ( where is a variable) output to syslog server for analyzing packet and port .
View 2 Replies View RelatedI have very strange behaviour on my Cisco 2801 router when I applied access list on wan interface.
Architecture:
SIP Provider <----> Cisco 2801 <-----> CUCM 6
Problem:
We are using Cisco 2801 as Voice gateway for CUCM 6. so only one purpose of this router is just receiving calls on sip dial-peer and transfering to internal network.
If you look on access list below, if 'log' words don't present on these 2 lines, access list didn't work. Problem with it is that when I establish call from us or to us I can't hear incomming RPT stream, but other side can hear me. But when I type word 'log' there, everything stars working immediately.
Cisco 2801 IOS version:
Cisco IOS Software, 2801 Software (C2801-ADVENTERPRISEK9_IVS-M), Version 12.4(6)T9, RELEASE SOFTWARE (fc2)
[Code].....
how the Cisco VPN works, as i already have a post on here about not being able to connect an android device to my firewall, i am now struggling to get an Iphone 3gs iOS v4.3 (8F190) connected to the VPN Either.I have checked the Network (client) Access settings on the firewall, and confirmed the group names im after including the protocols it supports L2TP is Disabled so it looks like i can only connect via IPsec.so i fill out the required details in the IPhone but keep getting a message back from the phone
"The VPN Shared Secret is incorrect"
Now im sure i have this right as i use the same details on my laptop which connects to the VPN perfectly fine. but i am starting to bang my head against the wall, no matter what i try and do i cannot seem to get either device to connect to the firewall.i have a pair of ASA 5520 boxes running cisco software 8.2
Recently I came across a router (Cisco 3845, IOS 12.4) configured for TACACS, one local username and an enable password. Going through the configuration I noticed the router didn't have an enable secret password which I thought was strange. The TACACS config is below, comments regarding the TACACS config and the consequences of not having an enable secret or if there is a need for one.
aaa authentication login default group tacacs+ aaa authentication login no_tacacs enable aaa authorization exec default group tacacs+ aaa authorization commands 1 default group tacacs+ aaa authorization commands 15 default group tacacs+ aaa accounting exec default start-stop group tacacs+ aaa accounting commands 1 default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+
I have created internal user on internal identiy store --> users with password & enable password , Similarly i have enabled max privilige level 15 under policy elements , authorisation & permission ,Device administration , shell profile .But i am unable to login into device using enable password , I am finding following error on my logg report
Failuire reason : 13029 Requested privilige level is too high .
I am experiencing a problem that when I telnet a router ip.It prompts for username and password.After entering username and password the router enter into exec mode with > prompt.But when trying to enter in privilege exec mode by typing en or enable it gives error:
"Translating "en" %unknown command or computer name.or unable to find computer address".
This problem started on removing easy vpn configuration which include aaa new model configurations. The router is in production environment and have remote and console access.
I have an HP 6500 that is connected, wired, to our Dell desktop and wireless to our Mac laptop. The color is great on documents from the desktop. However, if I print a document from Word on the Mac the colors are faded. I can print a picture from the picture folder and the color is accurate. It seems the colors are only poor when printing from Word. THis is a major problem since I build ads using Word.
View 1 Replies View RelatedI have cisco ACS 5.2 and external identity source as RSA secure ID.Currently when the RSA user login to AAA Network devices, User id & passcode prompt coming after giving the credential its going to user exec mode.Then after "enable" command again asking for Passcode giving passcode then user able to logged in successfully.
I need RSA users to get direct privlege level15 (privlege mode) ? no need to ask enable password ?
I checked this for local ACS users it is working and loca users getting directly privelege mode access...
There was this router Cisco 815 that i consoled. I cannot go into its privilege mode. even typing enable still cant go to its # mode. whats the problem with this router? how am i able to fix it? its initial problem was it cannot carry more pc client anymore.. 815 series has a 4 switch port at its back and a wan port.the 4 switch port cannot access the internet if connected to 4 pc clients.
View 5 Replies View RelatedWe have more than 50 devices handling by PI 1.2 (testing) I like to know how to do configuration archiving with user who doesn't have write privilege.
I tried like this.
username john privilege 6 password cisco privilege exec level 6 show running-config
(result) show run --> blank
I tried this user with one of switch in PI 1.2. It did not do configuration backup
username inout password inout username inout privilege 15 autocommand show running-config
(result) once logged in, it automatically showed running-config. However when I tried with PI 1.2 with this user (inout). I couldn't do configuration back.
reference [URL]
create certain user with read-only privilege while PI 1.2 is able to do configuration archiving ?
I have created users and given them telnet access to router 7200. They have full privilges(15) but everytime they login they login into user-exec mode instead of privilege mode. Is there a way to skip user-exec mode and allow the users to login directly into privilge mode so they dont have to enter password twice?
View 2 Replies View Relatedmy admin user is still being assigned privilege level 1, as shown in AAA Protocol > TACACS+ Authentication Details report.The report seems to show that the user is getting the right shell profile (Selected Shell Profile: Net-Admin -- is the one I setup for this user's group with both Default Privilege and Maximum Privilege set to Static 15). But still not the right privilege (Privilege Level: 1).Also, I found this document via Google: [URL] The router configuration examples all show this "aaa authorization exec tacacs+|radius local" command, which my device does not have.So I am wondering if I am not reading the ACS report right, or the device actually was assigned the correct privilge but that does not work without the "aaa authorization exec" command in the configuration?
View 1 Replies View RelatedI have added Cisco 5520 into the Cisco ACS 4.2 Tacacs Server. I can login to the user mode, but I can't login to the privilege mode ? though I have put enable password, but when I use that password, no joy ?
View 3 Replies View RelatedI can't seem to enable in ASA with a non-15 privilege level user configured in ACS 4.2 (tacacs).When I enable in IOS device, it enables and "show privilege" shows level 10 as expected. ACS should be configured correctly as it works fine with IOS. User is not set with explicit settings. Group is set with "max enable level" 15 and "shell exec priv level" 15. The enable password is set to the internal ACS PAP password. Works fine in IOS.When I enable in ASA, it fails to enable, and ACS log says "Tacacs+ enable privilege too low". I suspect that ASA tries to enable into level 15 explicitely. If I try to issue "enable 10" command in ASA it says: Enabling to privilege levels is not allowed when configured for AAA authentication. Use 'enable' only. [code]
View 2 Replies View RelatedWe have an ADSM (version 5.2(3) ) . In ASA ( version 7.2(3)) we are working with routing, access restriction and configuring IPSEC vpn with integration to our AD. We need to get two diferent profiles: one for networking administrators, who are going to manage routing, acls and have the root for ASA, and the other profile is going to be for the vpn administrators. As I read from the ASDM 6.0 user guide is posible define command privilege level. So do you consider posible to define a particular level for all the command related with ipsec vpn (Create, Modify and Delete) and asociate that particular level with the user for vpn administration.
View 1 Replies View Relatedhaving LMS 4.0.1 is it possible to authenticate user on a group base and assign different privilege to different groups?. The user's group are available in the LDAP server.Do I have to use a TACACS/RADIUS server between the Ciscoworks LMS and the LDAP repository?
View 1 Replies View RelatedI have a customer with a 861 ISR.I want to block all the privilege 0 users from access the enable command
If i telnet into the device, as a priv=0, enable does not work
If i telnet into the device, as a priv=15, enable does work
If i telnet into the device, as a priv=0, enable does not work
If i telnet into the device, as a priv=15, enable does not work
I have issued the command:privilege exec level 15 enable Should block everyone except 15's from accessing the enable command SSH and TELNET are on the same vty:
line con 0
login authentication local_authen
no modem enable
line aux 0
line vty 0 3
[code]....
Basically TELNET is following the rules ( priv=0 not allowed to access enable ) but SSH is not following the rules ( both priv=15 and priv=0 cannot access the command ) is there a way from blocking somes users from login in completely?
I have 2 local accounts on a 3750 that kick in should radius be unavailable. If I log in as the admin account it gets priv 15, if I log in as the other user it gets privilege 3 which is correct, by my commands dont work, this is what I have added and the strange thing is I've dont this many times before on our other switches
username admin privilege 15 secret ***
username users privilege 3 secret ***
aaa new-model
[Code]....
what is the minimun privilege level to assign at username account on ASA 5505 to grant the access with AnyConnect?
username ... privilege ?
I have my first 3560x running IOS 15.0(1)SE and noticed that I can no longer login to privilege mode even though my use account is setup with privilege 15. I have the exact same setup on 12.2 (53)SE2 and have no issue, so has something changed?
View 4 Replies View RelatedIn CLI we have users log in at priv 1 and use "enable" to increase privilege and do configurations. This allows "accounting" of command history. On the AIR-AP1121G-A-K9 (12.3(8)JED1) I cannot duplicate this for http login.
I can log in as a user at priv 1. When I try to go to a privileged link like "Security" I get prompted for a second login/pw. Nothing works here unless I have a second user defined at priv 15 and enter that login/pw. The problem is - that login/pw can be used to log in via http in the first place which bypasses accounting of the actual user. It also allows login to the CLI at priv 15 which I cannot permit.
username test1 secret 5 abcdxxx
username test2 privilege 15 secret 5 efghxxx
enable secret 5 ijklxxx(code)
I have FWSM's in Cat 6513's. I have a need to be able to session from the switch to the FWSM by using default account (not local user), at privilege level 15 I further have a need to allow a user read only access by ssh'n into the FWSM...
I believe I need to setup a local user, at, say privilege level 5, assign the show command only to privilege level 5, then set the authorization command for that user. So, i think my command sets are as follows to accomplish this:
username <username> password <pw> priv 5
priv command level 5 mode exec command show
aaa auth ssh console LOCAL
aaa auth enable console LOCAL
aaa authorization command LOCAL
I think, that this will allow the user at privilege 5 to run only the show command and only by SSH to the FWSM while allow the priv 15 level default login to continue to function properly.
i am running NX-OS image n5000-uk9.5.1.3.N1.1.bin on the nexus 5020 platform.i have configured authorization with tacacs+ on ACS server version 5.2 with fall back to switch local database.a user test with priv 15 is craeted on ACS server, password test2 everything works fine, until i create the same username on the local database with privilege 0. ( it doesnt matter if the user in local database was created before user in ACS or after ) e.g.: username test password test1 role priv-0 (note passwords are different for users in both databases)
after i create the same user in local database with privilege 0,if i try to connect to the switch with this username test and password defined on ACS, i get only privilege 0 authorization, regardless, that ACS server is up and it should be primary way to authenticate and authorizate the user.
I tried to authenticate and authorized Nokia/checkpoint Nortel/AD3 and Nortel 5510 platform using an 4.1 for windows ACS. the ACCESS-REQUEST is well processed bi the radius server wich send ACCESS-ACCEPT to the AAA Client (ie NORTEL or NOKIA), but i'have got privilege access denied on the Client side. RADIUS IETF Dictionnary is used for every device. all others Cisco Devices authenticate and are well authorized.
View 3 Replies View RelatedI´m looking for the best configuration to restrict a user to read-only. The restriction should be configured via CLI not TACACS+.
-Hardware: 3750 (probably not interesting for this question)
-Oldest IOS: 12.2(53)SE1
The user should be allowed to: see the running-configurationtrigger all kinds of show-commandsping and traceroute from the device.The user should not be allowed to: upload/delete/rename files on the flash-memoryget into level 15 (not sure if I can avoid this)all other commands despite those from level 1 and those specified above.
I want to create a user who only has access to "router>" prompt on the CLI. this user should not be able to do enable command and by no other means be able to go to global configuration mode. I know the command router(conf t)# username ABC privilege 1 password ABCPASS, but even with this command, this user gets privilege 15 access.
View 2 Replies View Related