Cisco AAA/Identity/Nac :: Can't Seem To Enable In ASA With Non-15 Privilege Level User Configured In ACS 4.2
Apr 29, 2011
I can't seem to enable in ASA with a non-15 privilege level user configured in ACS 4.2 (tacacs).When I enable in IOS device, it enables and "show privilege" shows level 10 as expected. ACS should be configured correctly as it works fine with IOS. User is not set with explicit settings. Group is set with "max enable level" 15 and "shell exec priv level" 15. The enable password is set to the internal ACS PAP password. Works fine in IOS.When I enable in ASA, it fails to enable, and ACS log says "Tacacs+ enable privilege too low". I suspect that ASA tries to enable into level 15 explicitely. If I try to issue "enable 10" command in ASA it says: Enabling to privilege levels is not allowed when configured for AAA authentication. Use 'enable' only. [code]
View 2 Replies
ADVERTISEMENT
Aug 10, 2011
I have a customer with a 861 ISR.I want to block all the privilege 0 users from access the enable command
If i telnet into the device, as a priv=0, enable does not work
If i telnet into the device, as a priv=15, enable does work
If i telnet into the device, as a priv=0, enable does not work
If i telnet into the device, as a priv=15, enable does not work
I have issued the command:privilege exec level 15 enable Should block everyone except 15's from accessing the enable command SSH and TELNET are on the same vty:
line con 0
login authentication local_authen
no modem enable
line aux 0
line vty 0 3
[code]....
Basically TELNET is following the rules ( priv=0 not allowed to access enable ) but SSH is not following the rules ( both priv=15 and priv=0 cannot access the command ) is there a way from blocking somes users from login in completely?
View 9 Replies
View Related
Feb 15, 2013
We have more than 50 devices handling by PI 1.2 (testing) I like to know how to do configuration archiving with user who doesn't have write privilege.
I tried like this.
username john privilege 6 password cisco privilege exec level 6 show running-config
(result) show run --> blank
I tried this user with one of switch in PI 1.2. It did not do configuration backup
username inout password inout username inout privilege 15 autocommand show running-config
(result) once logged in, it automatically showed running-config. However when I tried with PI 1.2 with this user (inout). I couldn't do configuration back.
reference [URL]
create certain user with read-only privilege while PI 1.2 is able to do configuration archiving ?
View 0 Replies
View Related
Mar 11, 2013
I´m looking for the best configuration to restrict a user to read-only. The restriction should be configured via CLI not TACACS+.
-Hardware: 3750 (probably not interesting for this question)
-Oldest IOS: 12.2(53)SE1
The user should be allowed to: see the running-configurationtrigger all kinds of show-commandsping and traceroute from the device.The user should not be allowed to: upload/delete/rename files on the flash-memoryget into level 15 (not sure if I can avoid this)all other commands despite those from level 1 and those specified above.
View 2 Replies
View Related
Jun 13, 2011
I have cisco ACS 5.2 and external identity source as RSA secure ID.Currently when the RSA user login to AAA Network devices, User id & passcode prompt coming after giving the credential its going to user exec mode.Then after "enable" command again asking for Passcode giving passcode then user able to logged in successfully.
I need RSA users to get direct privlege level15 (privlege mode) ? no need to ask enable password ?
I checked this for local ACS users it is working and loca users getting directly privelege mode access...
View 2 Replies
View Related
Jun 4, 2011
I have created internal user on internal identiy store --> users with password & enable password , Similarly i have enabled max privilige level 15 under policy elements , authorisation & permission ,Device administration , shell profile .But i am unable to login into device using enable password , I am finding following error on my logg report
Failuire reason : 13029 Requested privilige level is too high .
View 3 Replies
View Related
May 15, 2012
i am running NX-OS image n5000-uk9.5.1.3.N1.1.bin on the nexus 5020 platform.i have configured authorization with tacacs+ on ACS server version 5.2 with fall back to switch local database.a user test with priv 15 is craeted on ACS server, password test2 everything works fine, until i create the same username on the local database with privilege 0. ( it doesnt matter if the user in local database was created before user in ACS or after ) e.g.: username test password test1 role priv-0 (note passwords are different for users in both databases)
after i create the same user in local database with privilege 0,if i try to connect to the switch with this username test and password defined on ACS, i get only privilege 0 authorization, regardless, that ACS server is up and it should be primary way to authenticate and authorizate the user.
View 3 Replies
View Related
Sep 21, 2011
We have an ADSM (version 5.2(3) ) . In ASA ( version 7.2(3)) we are working with routing, access restriction and configuring IPSEC vpn with integration to our AD. We need to get two diferent profiles: one for networking administrators, who are going to manage routing, acls and have the root for ASA, and the other profile is going to be for the vpn administrators. As I read from the ASDM 6.0 user guide is posible define command privilege level. So do you consider posible to define a particular level for all the command related with ipsec vpn (Create, Modify and Delete) and asociate that particular level with the user for vpn administration.
View 1 Replies
View Related
Sep 7, 2011
having LMS 4.0.1 is it possible to authenticate user on a group base and assign different privilege to different groups?. The user's group are available in the LDAP server.Do I have to use a TACACS/RADIUS server between the Ciscoworks LMS and the LDAP repository?
View 1 Replies
View Related
Jul 14, 2011
I have FWSM's in Cat 6513's. I have a need to be able to session from the switch to the FWSM by using default account (not local user), at privilege level 15 I further have a need to allow a user read only access by ssh'n into the FWSM...
I believe I need to setup a local user, at, say privilege level 5, assign the show command only to privilege level 5, then set the authorization command for that user. So, i think my command sets are as follows to accomplish this:
username <username> password <pw> priv 5
priv command level 5 mode exec command show
aaa auth ssh console LOCAL
aaa auth enable console LOCAL
aaa authorization command LOCAL
I think, that this will allow the user at privilege 5 to run only the show command and only by SSH to the FWSM while allow the priv 15 level default login to continue to function properly.
View 1 Replies
View Related
Jul 14, 2012
I have ASA 5585 with SSP20. I want to enable same security level subinterfaces (routed mode) to communicate with each other.
I have put below command at global level but somehow it is not happening.
hostname(config)# same-security-traffic permit inter-interface
Do I also need to check for NATing or some other things apart from above command?
View 2 Replies
View Related
Dec 1, 2011
my admin user is still being assigned privilege level 1, as shown in AAA Protocol > TACACS+ Authentication Details report.The report seems to show that the user is getting the right shell profile (Selected Shell Profile: Net-Admin -- is the one I setup for this user's group with both Default Privilege and Maximum Privilege set to Static 15). But still not the right privilege (Privilege Level: 1).Also, I found this document via Google: [URL] The router configuration examples all show this "aaa authorization exec tacacs+|radius local" command, which my device does not have.So I am wondering if I am not reading the ACS report right, or the device actually was assigned the correct privilge but that does not work without the "aaa authorization exec" command in the configuration?
View 1 Replies
View Related
Oct 4, 2011
In CLI we have users log in at priv 1 and use "enable" to increase privilege and do configurations. This allows "accounting" of command history. On the AIR-AP1121G-A-K9 (12.3(8)JED1) I cannot duplicate this for http login.
I can log in as a user at priv 1. When I try to go to a privileged link like "Security" I get prompted for a second login/pw. Nothing works here unless I have a second user defined at priv 15 and enter that login/pw. The problem is - that login/pw can be used to log in via http in the first place which bypasses accounting of the actual user. It also allows login to the CLI at priv 15 which I cannot permit.
username test1 secret 5 abcdxxx
username test2 privilege 15 secret 5 efghxxx
enable secret 5 ijklxxx(code)
View 1 Replies
View Related
Aug 26, 2007
I tried to authenticate and authorized Nokia/checkpoint Nortel/AD3 and Nortel 5510 platform using an 4.1 for windows ACS. the ACCESS-REQUEST is well processed bi the radius server wich send ACCESS-ACCEPT to the AAA Client (ie NORTEL or NOKIA), but i'have got privilege access denied on the Client side. RADIUS IETF Dictionnary is used for every device. all others Cisco Devices authenticate and are well authorized.
View 3 Replies
View Related
Sep 10, 2012
I have an ASA 5520 8.2(5) with ACS 5.1, I made the configutation of Authentication and is working well, now how I can configure the authorization and get into the privileged level 15 mode directly.
View 6 Replies
View Related
Mar 13, 2012
need an access point configured in the user minimum because I was looking and some had up to 49 LAP connections at the same time. I have a WLC 4402 VERSION 7.0.98
View 1 Replies
View Related
Sep 22, 2011
We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies
View Related
Nov 28, 2012
Whether ISE-3315-K9 with ise version: Service Engine: 1.0.4.573 , supports the command level accounting
Bascially , we have integrated Cisco Switches with Cisco ISE for Device Authentication using Radius , we are able get the authentication logs on to the devices , but for any command changes or update done on Cisco devices we are not able to get the command accounting.
View 1 Replies
View Related
Aug 5, 2012
I am using ACS 5.3. I have succesfully configured Machine Authentication for a Windows 7 laptop using EAP-TLS. The ACS is configured with an Active Directory external identity store where the Windows 7 laptop is configured as part of the domain. I'm pretty sure that the ACS was using the AD to authenticate the laptop's name because at first the authentications were failing because I had the Certificate Authentication Profile configured to look at an attribute in the client certificate that was empty. When I fixed that, the authentication suceeded.
I started doing some failure testing so I disconnected the Domain Controller from the network. Sure enough, the ACS shows the Active Directory external store is in the Disconnected State.I then went to my Windows 7 laptop and disconnected the wireless connection and connected it again, expecting it to fail because the AD is down. But it succeeded! My Win 7 laptop is accessing the network wirelessly through a Lightweight AP and 5508 WLC. The WLAN Session Timeout was set for 30 minutes. So even with the AD disconnected, every 30 minutes, the ACS log showed a successful EAP-TLS authentication. I then changed the WLAN Session Timeout to 2 hours 10 minutes. Same thing, every 2 hours 10 minutes, a succesfull EAP-TLS authentication. I really don't know how the authentications are succeeding when the AD is not even connected. Is there a cache in the ACS?
View 7 Replies
View Related
Apr 19, 2013
Found you on Google and prays that the regulars here will take pity on a former Juniper admin. I've got a brand new shop to handle that is all Cisco including CUCM 8.x and I have zero Call Manager experience. How to enable international calling for a single user
[code]...
brief flow/steps for making sure a user can dial international? I figured it was as easy as making sure their DN CSS had the ability to do so, but apparently not.
View 5 Replies
View Related
Mar 23, 2012
I've installed Cisco ACS 5.3. After I created several internal users (defined password and enabled password), Identiy Groups, Access Polices, Network Devices and AAA Clients (e.g. Cisco 1841) for Radius and configured my Router like this:
...
aaa authentication login VTY group radius local-case
aaa authentication enable default group radius enable
....
Now I'm able to login successful using my internal User. But if I try to use enable to enter the enable level I'll receive the message "% Error in authentication." when I use the defined enable password.
In the ACS logging I'll can see that "$enab15$" is missing. If I setup a user name "$enab15" I can login to enable level, but what have I to do, to use the custom enable passwords?
Step 1.2 - 1.5 is requiered for both (Radius and Tacacs). Then you have to switch to 2.1-2.7 for Radius or 3.1 - 3.7 for Tacacs authentication.
View 1 Replies
View Related
Jun 17, 2011
how do i change the telnet and enable and vpn user password on asa 5570.
View 4 Replies
View Related
Sep 17, 2012
I have a Cisco 6509 with IOS "s222-ipservicesk9_wan-mz.122-18.SXF16.bin"I need to enable dot1x on user's ports on the switch. each user is connected to the switch through the IP phone.
I just found out that I can not enabled dot1x on trunk port. I have tried to use "switchport voice vlan " but I got:
Switch(config-if)#switchport voice vlan 123
Command rejected: Gi7/20 is Dot1x enabled port.
let me know what should I do to get dot1x working?
Note: I have connected a laptop directly to the port and dot1x is working fine.
View 5 Replies
View Related
Jul 21, 2011
I am testing rogue on wire using 5508 WLC and , I have a dedicated AP configured as rogue detector and configured the switch port where the Rogue detector is connected as trunk. I have plugged in an autonomous AP with open authentication to the same switch so that it can act as a rogue. On the WLC, I can see that Autonomous AP as rogue on Wire. But along with that I am seeing another AP as rogue on wire, even though i have plugged in only one Autonomous AP to the switch.
View 3 Replies
View Related
Jan 28, 2013
How to configure authentication of enable password using acs 5.3. I have installed acs 5.3 and created user and gave relevant passwords. Following config is done on router
aaa new-model
aaa authentication login default group tacacs+ local
aaa authen enable default group tacacs+ enable
tacacs-server host x.x.x.x key xxxxx
Now when I telnet router, i can authenticate username/pass with acs5.3 but when i try to enter enable command and give password, it gives me error in authentication. What is the process of configuring enable passwords?
View 6 Replies
View Related
Feb 28, 2013
We are using ACS 5.3 with two servers in a distributed solution.All logs are collected on primary server so when this server fails all logs are lost.How can I enable log on secondary server also?
View 2 Replies
View Related
Oct 12, 2011
ACS and i would like to know how to enable the "Configuration Audit" for someone login to my network devices using their ACS login and i can monitor what they did on it.
ACS Version : 5.2.0.26
View 6 Replies
View Related
Dec 21, 2012
I have migrated my ACS data from 4.1 to 5.1 and everything is working fine to test the connection I have configured a switch to get the authentication from the new Tacacs server, using my old username and password..i got in perfectly but when the switch asked my for enable which is the same password, it refused the password.(I have unchecked the <use a different password for enable> option) I deleted my switch from the Tacacs to enter locally, I went in with no problems..i thought that the problem may be from the old configuration.so I created a new username and password to check, and the problem still exist.
View 2 Replies
View Related
Feb 8, 2012
how to Config the ACS 4.2 server runs in TACACS + mode (users accounts configured the ACS) mode to authenticate enable mode password on the asa using the same AD account?
View 10 Replies
View Related
Jan 12, 2012
We have ASA configured in multi context mode, with software 8.4(2) configured for AAA Configuration is admin context as follows:
aaa-server TAC protocol tacacs+
aaa-server TAC (management) host 10.162.2.201
key *****
aaa authentication enable console TAC LOCAL
aaa authentication http console TAC LOCAL
aaa authentication serial console TAC LOCAL
aaa authentication ssh console TAC LOCAL
Because of multiple context, after logging in we enter System context. Console port authentication is working fine except access to privileged mode while connecting over console port. After issuing "enable" command ASA accepts only configured enable secret in system context and changes user ID to enable_15, so we are unable to do user-level command authorization and accounting.It seems that ASA in system context is not aware of any AAA configuration, and there isn't any command to configure AAA in system context.Is there any way to configure enable authentication over AAA in system context?
View 3 Replies
View Related
Mar 11, 2013
Would like to check out is it possible binding Cisco secure ACS 5.x to support router/switch ios feature view - superview and parser command
Busines objective is assigning administrative roles, with different role based CLI access, using ACS5.X as backend server. a. Admin (allow all) b. network monitor (privlege # 7, enable view that can doing various show command and configure) c. support (privlege #1, read only)
View 2 Replies
View Related
Dec 29, 2011
Changed my AD password and now i cannot get into the enable side of the cisco switches on our network (we have no routers).Looking on the logs for the ACS v4.2 I can see the following -
On TACACS+ Accounting you can see the connections which have worked - it the initial tty connections -
When i look in the failed attempts i see the following Auth failed - External DB user invalid or bad password or on another occasion internal error or EAP-TLS or PEAP authentication failed due to unknown CAcertificate during SSL handshake.
View 1 Replies
View Related
Apr 11, 2013
I am trying to get users in the external identity store (AD) to be dropped directly into enable mode after being authenticated, since I don't know of a way to set an enable password for users in an external identity store. I think it has something to do with shell attributes but I'm not realy sure.
So here's what I tried.Linking identity group to external group and provide full command priviliges - enable still didn't work Creating duplicate users in the internal identity store and setting the password type field to AD1 - That gives me the ability to get to the enable password prompt hit enter on the blank promt then prompts for Old and new passwords but fails everytime with an Error in Authentication.
View 8 Replies
View Related
