Sharing :: Use Old Computer As Auto-sync Backup And Production Server?
Jun 20, 2011
I have this idea of using my old computer (which is still pretty awesome) as a back up + production server. What this would entail would be that each person in my house has a dedicated hard drive that auto-syncs folders they've selected for backing up (not Memeo under any circumstances!). Then there will be a hard drive for me to work on web projects on. I'd like this computer to be very secure but if needed, I could show my work on the production drive to my boss.
View 6 Replies
ADVERTISEMENT
Mar 21, 2013
I have a Nas4Free (FreeBSD) server on location A and another Nas4Free server on location B.
I need to regulary access to location B's some folder from Windows machine at location A. What is the best scenario for this?
I think to rsync those folders/files every night to location A, but then I think what if in the future there are many other locations (C, D, E, F) that need to be rsynced to location A, that will make location A need a very large harddisk space that maybe not available in the market or limit
by the hardware/BIOS support.
View 2 Replies
View Related
Jun 20, 2012
How to take auto running configuration backup when use commit command in asr9k .Our asr9k sofware Version 4.0.1[Default] .I usse the commands
ftp client password encrypted 050D121F345F4B1B4
ftp client username cisco
ftp client source-interface GigabitEthernet0/0/0/14
ftp client anonymous-password cisco
(Password information changed)
configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf But auto backup not happening .following errror showing after every COMMIT command.
( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.
Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )
Manually I able to take Running-configuration backup through ftp int same lacation (ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .
View 1 Replies
View Related
Sep 18, 2011
How to set auto backup folders and files in windows2003Should i use inbuilt utility or should i use any Third Party software if software which is the best one that i use
View 1 Replies
View Related
Mar 6, 2012
Is it possible to create a job what automatically export the devices configs that are in the folder CSCOpxfiles medemushadow? It would be wonderdul if CW could export the .cfg files into a .rar and send in email or something like this.
View 1 Replies
View Related
Dec 4, 2011
I setup one acs v5.3 in one server in NYC and another acs v5.3 in SJC.I want to make the acs.nyc as primary and acs.sjc as the secondary, how do i setup it up?
View 1 Replies
View Related
May 21, 2011
I am looking for a program to use to back up my datafiles to a central pc in my home -a server, and then to back that up to the my webspace.
View 1 Replies
View Related
Feb 24, 2013
How do I do a remote backup to an IP address? I am using NAT.I will be using port forwarding.I am using the windows "Add Network Location" wizard.I typed in my router's IP address, and it doesn't like it.I would like to run a backup by selecting the destination as this network location, if possible.
View 1 Replies
View Related
Jan 20, 2011
I have got a 1TB external HDD...I want to use this to backup my data (dokuments , pics , video) that are on 2 desktops and one laptop---
AS I understand the terminology a I won't have enough room to do image backups (these back up all info incl OS ??) as on pc is usingb 677 gb and the other 400 gb ---- and anyway I can re-install windows if anything goes wrong...
SO---am I able to do this-
1. connect the ext- HDD to PC running win 7 64 bit....create a folder called "win 7 64 bit" and then drag and drop filesand folders into that folder(or use windows backup..which i am unfamilar with)
2. then connect to PC running Vista 64 bit ..create a f�lder called "Vista 64 bit" and do as above....
3. Do the same for the laptop running win 7 32 bit
Am I right in assumming that because it's just data I can put info from different OS on to it without and conflicts when connecting it to different Pc's?
View 7 Replies
View Related
Dec 30, 2011
I have decided to set up a simple network at my home. I have got 2 PC's (one ground floor, one up staris), printer, TV and router.Now, my router has got only 4 sockets for RJ45 (no usb connection available). My target is to have one storage hard drive of 2TB for sharing pictures, files and automatic backup from PC's. Make of my router is D-link DIR-615. I want to have PC's connected by RJ45 for quick file transfer and TV as well to load movies from external/network hard drive so 3 of 4 ports are already used.I want to have my printer online in network all the time, so any PC can print at any time without connecting USB cable. Also I do not want to plug my printer into PC downstaris and share it in the network because if PC will be switched off, PC upstaris won't be able to print. So I want all my devices have connected to the router. Printer does not support ethernet interface as well (only usb connection).I've got a choice to buy an External Hard Drive (USB) or Network Hard Drive. I have choosen these two:
[URL]
As I said, I got 2 devices to connect to my network, and there is also one port available. I know, we got many different hubs etc, but what about printer? It supports only USB 2.0.I have also found very basic NAS on ebay:
[URL]
I thought I could by external hard drive because it is cheaper than network, and connect it together with my printer to this NAS and then NAS to router. Will I loose file transfer speed?
View 1 Replies
View Related
Jan 24, 2012
Domain support with these operating systems seems to be hit and miss.I have 11 computers connected to a domain and I was wondering what the best way to back up the files on the workstations to the server would be. The server has a mirrored raid array and online backup as well. Just checking to see what the best way to do this would be. I am having trouble with the offline files sync / online files sync with these operating systems.
View 1 Replies
View Related
Mar 24, 2013
Just installed N600 Play router. All computers and phone connect fine, but computers won't auto connect after reboot or sleep. With old router this worked fine.
View 4 Replies
View Related
Dec 14, 2010
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
View 19 Replies
View Related
Dec 14, 2011
This network has a peer network with a mixture of Win 7, Vista and XP computers. The network problem I am having is with an XP computer that was able to access network shares on a Win 7 Pro (64-bit) computer yesterday, but cannot today. I tried repair steps that have worked for me in the past, but didn't today.
1. Rebooted.
2. Turned off Windows Firewall.
3. Re-ran the Network Setup Wizard and select turn on file and print sharing.
4. Changed IP configuration to choose NETBIOS over TCP/IP.
5. Uninstalled AV software.
Error Messages that I have been receiving:
1. When attempting to connect to a share on Win 7 PC: "Microsoft Windows Network: The specified server cannot perform the requested operation. The connection has not been restored."
2. When trying to view the computers in the workgroup: "Workgroup is not accessible. You might not have permission to use this resource. Contact the administrator of this server to find out if you have access permissions. The specified server cannot perform the requested operation.
3. When using the command, "NET VIEW" from the command prompt: "System Error 58 has occurred.
4. Event Log: Browser error 8032. The browser service has failed to retrieve the backup list too many times on transport DeviceNetBT_Tcpip_{06ECF93A-1B89-4FF4-923E-F3302EF95FE1}. The backup browser is stopping.
View 3 Replies
View Related
Oct 16, 2011
Under Service in Win NT 2008 server, how can I remove the auto-shut down task schedule for all students' computers in the classrooms. It always popup a message box at 5:30pm - "auto shutdown" in all workstations (win xp). How to remove that from "service" and not affecting the server to shutdown? Click where to disable/stop it?
View 2 Replies
View Related
Apr 22, 2012
I have a switch(6500) with 2 vlans(2 SUBNETS) and from the other side of my network i have 2 terminal servers.
I want to have a VIP in my 6500 switch which i have the 2 vlans and when the first vlan(network) try to connect to the VIP
my switch will forward to first terminal.When the second vlan try to connect to VIP the switch will forward to second terminal.
I'd like the switch to decide in wich terminal server will forwared the packet based on source network.
I am not sure how i can do this???I use VIP with SLB???I use NAT???PBR?
View 4 Replies
View Related
Feb 21, 2011
The public IP address of my 2800 router where all VPN clients terminate will change shortly. There are some technique to auto-change the client´s profile for clients to connect to the new IP address? I have seen that VPN 3000 concentrator is able to do this so i can´t get one of those right now
View 1 Replies
View Related
Jul 8, 2012
I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies
View Related
Nov 21, 2012
if i enable Controller Configuration Backup is that included in the server backup? and can the controller configs be specifically extracted from the server backup?
View 8 Replies
View Related
Mar 9, 2012
We want to take the current configuration backup of the LMS 4.0 (Installed on Win 2003 Enterprise) and restore the same to a new windows machine (Win2003 standard edition).
View 1 Replies
View Related
Aug 7, 2011
I am running a laptop (Windows 7) and a desktop (Windows XP SP3), with the laptop connected wirelessly and the desktop connected by ethernet cable to a Linksys modem / router. Both computers can always connect to the internet. The laptop can (almost always) print from the usb printer connected to the desktop. Only on about 30% of occasions can I see the other computer in Windows Explorer or the equivalent, and therefore cannot access all the files. I can usually ping the other computer by ip and get a reply. I can rarely ping the other computer successfully by name unless I ping by ip first.
View 19 Replies
View Related
Mar 12, 2013
How do you configure a external FTP Server for Cisco NCS 1.1? I only get setup username/password, i also need to setup FTP server IP and directory.
View 1 Replies
View Related
Aug 29, 2011
connecting one computer to 10 others. In my office there are 11 computers, mine and 10 others. I was wondering what steps I would go about taking to ensure that while monitoring these computers, I could also if needed choose to close out of a program when I see it misused, or take control of it when necessary?
View 3 Replies
View Related
Jan 7, 2011
i want to share internet between a laptop and a desktop.i have no switch or router.by wire i can share file but cant share internet.both pc have win7.
View 3 Replies
View Related
Jan 24, 2012
I support a dental office that just went in on an x-ray machine with two other offices. So, there is a total of three seperate offices each with their own Internet connection and each on a different ip scheme. They all want to be able to see the Win XP computer connected to this x-ray computer. Ideally, they would each want to be able to run their dental software on this computer.
View 4 Replies
View Related
Feb 10, 2011
If the hostnames are the same - can I restore the backup file from a wcs 5.2.148.0 instance on a different wcs instance running wcs 6.0.196.0?
View 1 Replies
View Related
Oct 4, 2011
Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message.
View 1 Replies
View Related
May 29, 2012
ow to backup Cisco ASA-5510 from a Linux server via TFTP?I do know how to backup a switch or a router. Basically creating an access list such as:
access-list 55 remark PERMIT hosts requesting TFTP access
access-list 55 permit host 172.16.0.27
and allowing access to
tftp-server nvram:startup-config 55
all this inside the router or the switch. From the Linux box just running a simple command such as:
tftp 172.16.0.3 -c get startup-config newbackup.conf
where 172.16.0.3 is the IP address of the switch and newbackup.conf is the name of the config file stored on the Linux machine.So, how do I do that with an ASA box? how to backup ASA from inside it.
View 1 Replies
View Related
Mar 3, 2013
Database backup on the LMS server is frequently failing due to job conflict and we have upgraded the lms from LMS 4.2.2 to LMS 4.2.3 to fix this but no luck. same issue we are facing again in the 4.2.3.
View 4 Replies
View Related
Jan 14, 2012
I read that there is a USB 3.0 docking station with a Gigabit NIC already available, probably NOT using this, as it looks like the chip should be available in Feb 2012. Such an adapter would allow me to re-purpose my homemade NAS (with USB 3.0 expandability) to gateway / router use.
View 1 Replies
View Related
Oct 12, 2011
I am trying to share my base computer's internet with my PS3. My operating system is Windows 7, and I use the free version of PDAnet as my internet. I have followed the instructions from [URL], but I still receive the error, "an error occurred while Internet Connection Sharing was being enabled (null). In. Addtion, after rebooting the computer, and double checking the list of services have been started automatically, I noticed that Application Gateway Layer did not start automatically.
View 1 Replies
View Related
Jul 2, 2012
how can i use a command prompt to configure my network cable
View 1 Replies
View Related
Mar 21, 2012
Is it possible for AnyConnect to utilise the backup server defined in the connection profile when the session limit is hit on an ASA? Essentially if I hit the 250 limit on my ASA 5510 in Region A, will it try the backup server ASA defined in the connection profile which is in Region B?
From what I have read, the backup server only kicks in when the AnyConnect client cannot connect, but in this scenario it will connect but get an error message.
View 1 Replies
View Related
