I support a dental office that just went in on an x-ray machine with two other offices. So, there is a total of three seperate offices each with their own Internet connection and each on a different ip scheme. They all want to be able to see the Win XP computer connected to this x-ray computer. Ideally, they would each want to be able to run their dental software on this computer.
View 4 RepliesI am running a laptop (Windows 7) and a desktop (Windows XP SP3), with the laptop connected wirelessly and the desktop connected by ethernet cable to a Linksys modem / router. Both computers can always connect to the internet. The laptop can (almost always) print from the usb printer connected to the desktop. Only on about 30% of occasions can I see the other computer in Windows Explorer or the equivalent, and therefore cannot access all the files. I can usually ping the other computer by ip and get a reply. I can rarely ping the other computer successfully by name unless I ping by ip first.
View 19 Replies View Relatedconnecting one computer to 10 others. In my office there are 11 computers, mine and 10 others. I was wondering what steps I would go about taking to ensure that while monitoring these computers, I could also if needed choose to close out of a program when I see it misused, or take control of it when necessary?
View 3 Replies View Relatedi want to share internet between a laptop and a desktop.i have no switch or router.by wire i can share file but cant share internet.both pc have win7.
View 3 Replies View RelatedI am trying to share my base computer's internet with my PS3. My operating system is Windows 7, and I use the free version of PDAnet as my internet. I have followed the instructions from [URL], but I still receive the error, "an error occurred while Internet Connection Sharing was being enabled (null). In. Addtion, after rebooting the computer, and double checking the list of services have been started automatically, I noticed that Application Gateway Layer did not start automatically.
View 1 Replies View Relatedhow can i use a command prompt to configure my network cable
View 1 Replies View RelatedI am trying to share a printer on Windows Server 2003 machine so that my other computers can access the print share from my server. originally i was hosting the print server from one of the workstations (running Windows XP SP2). I now want the printer share to be hosted from the server. I set up the printer correctly (to my knowledge). i was able to set it up and print a test page. But when i go into properties and attempt to share the printer, i click on Share this Printer and enter in a name, i designate it to list the printer in the directory. Then i click apply and ok... and nothing happens. the printer is not shared. When i go back into properties, it shows that i am not sharing the printer.
View 2 Replies View RelatedThat is: that I have a slow general storage drive that is becoming full. A fast HDD for recording onto with fraps and for programs that I won't use with fraps. I then have an SSD as my main drive which gets VERY full VERY quickly. I then have another computer that has a pretty quick 1TB RAID 0 running and a gigabit network, the network being the bottleneck but still pretty damn quick (120MB/s which is plenty fast enough).
Now, what I intend to do is have my storage drive stay as is; my fraps drive to continue it's job, and then for my old computer to store my big programs to run off, things like games. Is it possible to do this as when I've tried it says I don't have permission even though I gave access to the whole HDD from the network. (I'm installing on this computer but changing to the mapped network drive for the install directory).
i currently have a windows XP Pro machine alongside a windows 98SE machine. the windows XP machine is connected to my network via a wireless network adapter. But, i need the windows 98 machine connected to the internet as well. (i have to use windows 98 because of a program i use only works with DOS)
View 8 Replies View RelatedHow to connect 2 computer for sharing files & vpn connection
View 2 Replies View RelatedI am trying to transfer files from Laptop A to Laptop B. I can transfer files from B to A, but I can't transfer them from A to B. When I try to, I get an error message saying "Windows cannot access Laptop A".It then gives me the option to diagnose the problem (I'm using Vista on both laptops, by the way). When I click that, it gives me the error of "Cannot communicate with Laptop A. We pinged the remote host but did not receive a response".Laptop A is connected to the network according to it, it can access the internet fine and can access other laptops on the network fine. I have disabled the firewall, shared the folders appropriately, made sure they were both on the same workgroup (they are both on the default Vista WORKGROUP), and still nothing.
View 19 Replies View Relatedsuccessfully installed Windows 7 x64 on my computer this week, but the computer sometimes loses contact with my WD 1TB Book live NAS(When trying to copy Big FILE). When this happens, I restart the computer, and the drive usually reappears. I just bought this hard drive two days agoInstead of simply failing to recognize it, I sometimes get "not responding" errors when trying to open files.My hard drive (Western Digital My Book Live WDBACG0010HCH 1TBI contacted Western Digital support, Still no reply from them. still waitingi find some hardware forum to check this out .. also not solution yeti change my router,off firewall, also the same problem.
View 1 Replies View RelatedI have a 2 offices that need WAN network connection in other to share their files and other business things, but i don't know how to set up and link these 2 offices.
View 1 Replies View RelatedI have this idea of using my old computer (which is still pretty awesome) as a back up + production server. What this would entail would be that each person in my house has a dedicated hard drive that auto-syncs folders they've selected for backing up (not Memeo under any circumstances!). Then there will be a hard drive for me to work on web projects on. I'd like this computer to be very secure but if needed, I could show my work on the production drive to my boss.
View 6 Replies View RelatedHow to link 20 offices by wan
View 1 Replies View RelatedMy home network is all Windows 7 computers (4 total), and are Ultimates except for my laptop, which is Home Pro. So that's 3 computers with Ultimate and 1 with home pro. I have one computer (also Win 7 Ult.) that's my primary computer, the other 2 computers are mostly HTPC computers that I have set up to stream from my main computer.I do know how to set up Home groups for sharing files, but I could only set it up that there would be full access to the shares or no access at all. [For simplicity: My primary computer will be PC-1, the 2 HTPC's will be PC-2 and PC-3, and my laptop PC-4.]PC-1 will host all the files I want access to. PC-2 and PC-3 will access my music and videos folders for streaming. PC-4 which is my own personal laptop will have full access to shared folders that I DO NOT want being able to be accessed on PC-2 and PC-3.I have tried many and various types of ways to deny access from PC-2 and PC-3, where PC-4 would be allowed access to on my PC-1, but every time it's either all PC's get access or NO access to the shared folders. I also want to keep all my user accounts as admins.
View 2 Replies View RelatedI have been having some issues with Windows Audio needing to be restarted every time I log on. Also my theme has changed unexpectedly. I also noticed that Wndows firewall isn't started and it won't let me start it it gives me this...Could not start the Windows Firewall/Internet Connection Sharing (ICX) on local computer. Error 3 access is denied.
View 3 Replies View RelatedMETHODS THAT ARE SUITABLE TO CONNECT TWO OFFICES LOOKING AT THE SECURE INTRANET....
View 1 Replies View Relatedi am trying to establish a VPN connection between two remote offices.In the home side I have Cisco 1811W and on the far side CiscoSRP541.
What is the best solution to build a site-to-site VPN between those two locations. I originally thought to configure a GRE tunnel on the routers, but faced some issues with that.
I have an Avaya IP office setup on a 1.5 mb T1 PRI at location 1. My second location is going to run IP phones over 15mb/1mb DSL connection. All calls will generate from the IP office at location 1. I will have 6-8 IP phones at location 2.I assume i need a VPN setup between the two office for the IP phones to work. I've been looking for the best VPN solution and it appears for a budget the Netgear FVS318 or FVS338 is the way to go. If I go that route do I just need a FVS338 or FVS318 at both locations?
View 11 Replies View RelatedWe have two offices with two 1841 routers. Each office have two wan links (one ADSL with dialer, one SDSL) with fixed IP.The adsl link is the default route with failover.There is only one VTI working properly with the config below (the adsl one). If I remove the route "ip route 0.0.0.0 0.0.0.0 dialer 1 track 1" both VTI are working properly, however all traffic is going to SDSL witch is not the behaviour we would like to get.
get both VTI working with default route to ADSL link ?
------------------------------------------------
track 1 ip sla 1 reachability
delay down 1 up 1
!
!
crypto isakmp policy 1
encr aes
[code]....
Have 2 office locales. Currently have a Site to Site VPN over the public domain with 1 T-1 line on each side (different carriers). The performance is _poor_. A 2MB Excel file takes over 1 minute to open at the remote location (takes less than 10 seconds at primary location).Have approximately 20 users at the remote location (about 200 miles away); entry level firewalls; and primarily only work with MS Office files.
1) What are the differences between "Private Ethernet", "MPLS VPN", "Point to Point T-1s", and just old fashion Site to Site VPN? and is there one in particular we should focus on given we only have 2 offices?
2) Do we simply just need to increase our pipes on both sides from T-1s to 2 T-1s or a 10/10 IDE line to make our S2S VPN acceptable?
3) Is all that's really needed for P2P T-1s is to have the same carrier at both locations (this is available)? Do we still need VPN or if it's all over the same carrier it is secure?
4) If we go with Private Ethernet or Point to Point T-1s, would we then need another pipe to just get to the internet?
I have two cisco ASA 5505 devices and two cisco switches plugged to ASAs in each office. I need to create a VPN tunnel between two offices.
-Network behind the ASA1 in office1 is 192.168.1.0/24 with DHCP server – 192.168.1.10
-Networks behind the ASA2 in office2 are 192.168.5.0/25; 192.168.5.128/26 and 192.168.5.192/26
All computers in office2 need to get IPs from DHCP server 192.168.1.10. I have switch in office2 with 3 VLANS and I can assign computers from different subnets to different VLANs.How can I archive this goal? Should I assign 3 IPs for ASA2 inside interface (192.168.5.1, ...5.129, ...5.193) as a default gateways for each subnet? Should I put dhcp helper address 192.168.1.10 on the switch for each VLAN?
I have a cable modem in the basement and ethernet lines to two offices upstairs.I have a 4-port wireless router and a 5-port switch. I have a computer in each office and a NAS in one of the two offices.There is no direct wiring between the offices. I want to have internet access and access to the NAS from both offices. Will the following configuration work without having to go to Static IPs? 1) Modem01-> Router01->Switch01->Computer01; 2) Modem01->Router01->Switch01->NAS01; 3) Modem01->Router01->Computer02. If not, what needs to change?
View 3 Replies View RelatedI have setup a vpn connection at my remote offices with a 5505. At my main office I have a 5510.From my remote offices I can PING my Main office server. However when I go to set up a vpn connection through windows network and sharing center I can't seem to have the connection connect.....
View 15 Replies View RelatedI have the following problem on configuring ezvpn for the following situation: 3 different locations - 1 HQ with 2901 server and 2 offices with 861 clients.
Clients connects to HQ, I do traffic between HQ and offices but I cannot ping between offices (ping from 192.168.1.0/24 to 192.168.2.0/24 and vice versa.
The configs:
aaa new-model
!
!
aaa authentication login default local
aaa authentication login vpn_xauth_1 local
[Code]....
i am looking at quoting the SF302-08P for a client which will have three small offices interconnected via single mode fiber. I am planning on connecting them to a 3560 switch. Each office will have no more than 3 - 7942 phones. I reviewed the notes on this switch and it seems it should support this phone type without any issues. Any support/reliability issues with this switch and the 7942s ?
View 3 Replies View RelatedSo today all my remote offices can't connect to my server.
Looking as my asa 5510 in my main office it appears that the connections to the other offices is not working..So could this be from the power outage.I don't know how or why it would change no setting have been changed..
But staff at remote offices cannot connect to the server..The error they see is the primary dns is not responding.
I am trying to configure access to several remote offices for users who VPN into our main datacenter. The datacenter has a 5520, and the branches are connected through IPSec L2L VPNs. Branches all have 5505 or 5510's. Remote users use IPSec via the Cisco remote Client. Remote access into our data center works, and the L2L VPNs are perfect...just now that i need remote users to access the branches after Remote access VPNing (for support) i cant get that part to work.
View 2 Replies View RelatedLogon failure: The user has not been granted the requested logon type at this computer" Im having this same problem on two computers. One running windows vista ultimate 64bit and windows 7 home premium 32 bit to windows server 2008 r2 64 bit?
View 3 Replies View RelatedI have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies View RelatedI wanted to setup a home network for primarily sharing my music, pictures and videos.I have a PS3 which can stream the video/music and display the pictures from a media server to my TV.I was wondering between NAS and a desktop computer? and wanted to know which was the better or cheaper solution? (2 much 2 ask for both)
Main Issues
--Will NAS work with PS3?
--Incase of a computer, i know i will be able to use logmein or gotomypc to Download files directly to that machine even when im not home and when i do get home its ready to go. Can the same be achieved with a NAS?What else should i consider? i.e. pros and cons of both.
I am trying to establish a connection with an already existing IPsec VPN for file sharing. I click on the icon and get error messages when I type the correct username and password. I also entered the shared secret key correctly. I do not know where to enter the "group" name that coincides with the key I was given.
View 5 Replies View Related