How To Set-up A WAN In 2 Offices

May 16, 2011

I have a 2 offices that need WAN network connection in other to share their files and other business things, but i don't know how to set up and link these 2 offices.

View 1 Replies


How To Link 20 Offices By Wan

Jan 8, 2013

How to link 20 offices by wan

View 1 Replies View Related

Methods Used To Connect Two Offices?

Apr 17, 2012


View 1 Replies View Related

Sharing One Computer With Three Offices

Jan 24, 2012

I support a dental office that just went in on an x-ray machine with two other offices. So, there is a total of three seperate offices each with their own Internet connection and each on a different ip scheme. They all want to be able to see the Win XP computer connected to this x-ray computer. Ideally, they would each want to be able to run their dental software on this computer.

View 4 Replies View Related

Establish A VPN Connection Between Two Remote Offices?

Jul 17, 2012

i am trying to establish a VPN connection between two remote offices.In the home side I have Cisco 1811W and on the far side CiscoSRP541.

What is the best solution to build a site-to-site VPN between those two locations. I originally thought to configure a GRE tunnel on the routers, but faced some issues with that.

View 9 Replies View Related

FVS338 / FVS318 / VPN Between Offices For VoIP?

Jan 19, 2012

I have an Avaya IP office setup on a 1.5 mb T1 PRI at location 1. My second location is going to run IP phones over 15mb/1mb DSL connection. All calls will generate from the IP office at location 1. I will have 6-8 IP phones at location 2.I assume i need a VPN setup between the two office for the IP phones to work. I've been looking for the best VPN solution and it appears for a budget the Netgear FVS318 or FVS338 is the way to go. If I go that route do I just need a FVS338 or FVS318 at both locations?

View 11 Replies View Related

Cisco VPN :: 1841 / Dual Wan / VTI Between Two Offices?

May 16, 2012

We have two offices with two 1841 routers. Each office have two wan links (one ADSL with dialer, one SDSL) with fixed IP.The adsl link is the default route with failover.There is only one VTI working properly with the config below (the adsl one). If I remove the route "ip route dialer 1 track 1" both VTI are working properly, however all traffic is going to SDSL witch is not the behaviour we would like to get.

get both VTI working with default route to ADSL link ?

track 1 ip sla 1 reachability
delay down 1 up 1
crypto isakmp policy 1
encr aes


View 4 Replies View Related

Best Connection Options To Share Files Across 2 Offices?

Feb 18, 2011

Have 2 office locales. Currently have a Site to Site VPN over the public domain with 1 T-1 line on each side (different carriers). The performance is _poor_. A 2MB Excel file takes over 1 minute to open at the remote location (takes less than 10 seconds at primary location).Have approximately 20 users at the remote location (about 200 miles away); entry level firewalls; and primarily only work with MS Office files.

1) What are the differences between "Private Ethernet", "MPLS VPN", "Point to Point T-1s", and just old fashion Site to Site VPN? and is there one in particular we should focus on given we only have 2 offices?

2) Do we simply just need to increase our pipes on both sides from T-1s to 2 T-1s or a 10/10 IDE line to make our S2S VPN acceptable?

3) Is all that's really needed for P2P T-1s is to have the same carrier at both locations (this is available)? Do we still need VPN or if it's all over the same carrier it is secure?

4) If we go with Private Ethernet or Point to Point T-1s, would we then need another pipe to just get to the internet?

View 5 Replies View Related

Cisco VPN :: 5505 Create VPN Tunnel Between Two Offices

May 27, 2011

I have two cisco ASA 5505 devices and two cisco switches plugged to ASAs in each office. I need to create a VPN tunnel between two offices.
-Network behind the ASA1 in office1 is with DHCP server –
-Networks behind the ASA2 in office2 are; and
 All computers in office2 need to get IPs from DHCP server I have switch in office2 with 3 VLANS and I can assign computers from different subnets to different VLANs.How can I archive this goal? Should I assign 3 IPs for ASA2 inside interface (, ...5.129, ...5.193) as a default gateways for each subnet? Should I put dhcp helper address on the switch for each VLAN?

View 4 Replies View Related

Small Office Network - NAS And Internet Access From Both Offices?

Apr 26, 2011

I have a cable modem in the basement and ethernet lines to two offices upstairs.I have a 4-port wireless router and a 5-port switch. I have a computer in each office and a NAS in one of the two offices.There is no direct wiring between the offices. I want to have internet access and access to the NAS from both offices. Will the following configuration work without having to go to Static IPs? 1) Modem01-> Router01->Switch01->Computer01; 2) Modem01->Router01->Switch01->NAS01; 3) Modem01->Router01->Computer02. If not, what needs to change?

View 3 Replies View Related

Cisco VPN :: Setup A Vpn Connection At Remote Offices With A 5505?

Apr 11, 2011

I have setup a vpn connection at my remote offices with a 5505.  At my main office I have a 5510.From my remote offices I can PING my Main office server.  However when I go to set up a vpn connection through windows network and sharing center I can't seem to have the connection connect.....

View 15 Replies View Related

Cisco VPN :: EZVPN On Client Offices 2901 Server

Dec 3, 2011

I have the following problem on configuring ezvpn for the following situation: 3 different locations - 1 HQ with 2901 server and 2 offices with 861 clients.
Clients connects to HQ, I do traffic between HQ and offices but I cannot ping between offices (ping from to and vice versa.

The configs:
aaa new-model
aaa authentication login default local
aaa authentication login vpn_xauth_1 local

View 2 Replies View Related

Cisco Switches :: Quoting SF302-08P For Client Having Offices Interconnected

Nov 8, 2011

i am looking at quoting the SF302-08P for a client which will have three small offices interconnected via single mode fiber. I am planning on connecting them to a 3560 switch. Each office will have no more than 3 - 7942 phones. I reviewed the notes on this switch and it seems it should support this phone type without any issues. Any support/reliability issues with this switch and the 7942s ?

View 3 Replies View Related

Cisco VPN :: 5510 Lost Power - Remote Offices Cannot Connect To Server

Jun 26, 2011

So today all my remote offices can't connect to my server.
Looking as my asa 5510 in my main office it appears that the connections to the other offices is not working..So could this be from the power outage.I don't know how or why it would change no setting have been changed..
But staff at remote offices cannot connect to the server..The error they see is the primary dns is not responding.

View 2 Replies View Related

Cisco VPN :: 5505 / 5510 - Accessing Branch Offices Connected To Main Office Via L2L VPN?

Dec 17, 2012

I am trying to configure access to several remote offices for users who VPN into our main datacenter.  The datacenter has a 5520, and the branches are connected through IPSec L2L VPNs.  Branches all have 5505 or 5510's.  Remote users use IPSec via the Cisco remote Client.  Remote access into our data center works, and the L2L VPNs are perfect...just now that i need remote users to access the branches after Remote access VPNing (for support) i cant get that part to work.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved