Cisco Infrastructure :: 7206 Down / Connection Would Automatically Needs To Shift On Backup Server
Jan 7, 2012
I have a DLSW connectivity between 2800 series router and 7206 router. AS 400 is directly connected to 2800 series router and other server is connected directly to 7206 router. now i want to add one more server which will work as backup for the server connected to 7206 . What would be the connectivity/configuration to make it working in case primary server connected to 7206 is down or connection would automatically needs to shift on its backup server.
View 1 Replies
ADVERTISEMENT
May 24, 2012
I have a Cisco 831 router (c831-k9o3y6-mz.124-5c.bin) that cannot backup the config to a local tftp server. I have seen this behavior on a few different Cisco devices over the years and have never found a solution. The connection is made to the tftp server (in this case tftpd but similar behavior on any tftp server) and a blank file is created on the target machine file system, but the data is never transferred.
The router shows %Error opening tftp://192.168.0.2/router-confg (Timed out) [Failed]
The tftpd log shows 5 repeated attempts at the file write.
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:40.922]
Write request for file <router-confg>. Mode octet [25/05 11:56:40.922]
Using local port 61607 [25/05 11:56:40.922]
<router-confg>: rcvd 0 blk, 0 bytes in 3 s. 0 blk resent [25/05 11:56:43.922]
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:43.923]
[Code]...
This is also stopping me upgrading the image on the router as I cannot transfer in the other direction either.
View 1 Replies
View Related
Apr 3, 2003
Customer site connected to a PE using 2 x E1 circuits aggregated using Multilink PPP. The CE is a 1760, and the PE is a 7206. This is the customer HQ site.
Connected to the same PE are three other sites from the same customer. Each is connected with a single E1, again each CE is a 1760.
During some testing the customer did some large file transfers concurrently from each of the three remote sites into the HQ, so we had data coming into the PE via the three E1's (6Mbps) and then being routed onto the 4 Mbps Multilink PPP interface into the HQ, which is a potential bottleneck. This test failed miserably with packets being dropped on the output interface on the PE facing the HQ.
But then if Multilink PPP encap is removed, and we just connect the HQ using one E1 with HDLC encapsulation, the test works, even though we have half the bandwidth to the HQ, so an even greater potential bottleneck.
View 5 Replies
View Related
Sep 10, 2012
Whenever I want to turn off the ip cache flow and enter command "no ip flow egress" on a router interface, the router will self reboot and returned with the error message - System returned to ROM by bus error at PC message in the show version ouput.
I tried on two different routers below here and both also undergoing a cold restart when I key in the command "no ip flow egress" on the said interface
1) Cisco 7206 running IOS 12.4(1c)
interface GigabitEthernet0/1
ip address 10.20.10.2 255.255.255.0
ip flow egress
duplex auto
speed auto
end
when I key in "no ip flow egress" under int gi0/1 and the router self restarted and return the message Router uptime is 3 minutes System returned to ROM by bus error at PC 0x606D48FC,address 0x0
2) Cisco 3845 running IOS 12.4(3e)
interface GigabitEthernet0/0
ip address 10.20.20.2 255.255.255.0
ip nbar protocol-discovery
ip flow egress
duplex auto
speed auto
end
when I key in "no ip flow egress" under int gi0/0 and the router self restarted and return the message
Router uptime is 3 minutes System returned to ROM by bus error at PC 0x6007EBE0, address 0x0
View 4 Replies
View Related
Oct 23, 2011
i have a problem with a 4006 switch, when the poer goes out and comesback, the switch doesn't boot, you have to get in the console and type boot, the config register is 0x102, i try to change it but it did not let me, said somethong like usage, what can i do to configure the booting automatically
View 1 Replies
View Related
Jan 26, 2012
actually i have problems with the connection between a Cisco 3750 and P750 server, the Cisco Gbic is X2-10G-SR and the card of the server is 10 Gigabit Ethernet-SR PCI Express Adapter, both uses 850 nm wavelength but i cant see link between the two cards, the physical connection is with a fiber cable with a conector SC in the server and LC (cable adapter) in the switch.
View 1 Replies
View Related
May 26, 2013
I try to create a reposiroty for FTP Backup but it is not working with directories. Isn't it possible to create FTP repositories with directories?
I need to ad this URL e.g.: ftp://server/IT/Wi-Fi/Backup
This is not working. % Error reading directory on remote server
It works only when I add only the server. ftp://server/
Is there any way to add directories to the URL? Or what is wrong in my thought?
I think to use NFS but I'm not sure if that way is better as FTP, because FTP is default
View 4 Replies
View Related
Apr 17, 2011
how can i access the backup SUP from telnet/console while it's in the standby state?
View 3 Replies
View Related
Dec 14, 2010
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
View 19 Replies
View Related
Mar 24, 2011
I have a server on Intel PC and the computer used to start up if the power shutdown and then come back. However, lately , I notice that when the power shutdown and then come back, the server is not turning on and have to press the turn on button on the PC.
View 2 Replies
View Related
Dec 7, 2012
I have configured Cisco 1841 router. My problem is what if every first time a user opens the browser will display a web page server. My web server ip address is 10.10.1.5. [code]
View 4 Replies
View Related
Mar 15, 2011
i have a server with windows server 2003 that SQL server 2008 is installed on it.regulary server service will be stoped automativcaly and all shared folders will be unshared and i must restart server and waiting for next stop and .
View 1 Replies
View Related
Mar 10, 2013
I have created individual folders for the different users on the network domain server, but i am having trouble allowing the client to automatically connect to their personal folder.
View 2 Replies
View Related
Nov 21, 2012
if i enable Controller Configuration Backup is that included in the server backup? and can the controller configs be specifically extracted from the server backup?
View 8 Replies
View Related
Jan 4, 2012
I just bought a Linksys E4200v2 router and updated the firmware to 2.0.26.124551. The DHCP server is turned on however, it won't issue any IP addresses. I have to set IP reservations for all of my devices in order for the router to give them an IP address. This includes my printer, xbox360 and 2 computers. I'm also having this problem with the wired and wireless lan.
View 4 Replies
View Related
Mar 9, 2012
We want to take the current configuration backup of the LMS 4.0 (Installed on Win 2003 Enterprise) and restore the same to a new windows machine (Win2003 standard edition).
View 1 Replies
View Related
Mar 12, 2013
How do you configure a external FTP Server for Cisco NCS 1.1? I only get setup username/password, i also need to setup FTP server IP and directory.
View 1 Replies
View Related
Jun 20, 2012
How to take auto running configuration backup when use commit command in asr9k .Our asr9k sofware Version 4.0.1[Default] .I usse the commands
ftp client password encrypted 050D121F345F4B1B4
ftp client username cisco
ftp client source-interface GigabitEthernet0/0/0/14
ftp client anonymous-password cisco
(Password information changed)
configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf But auto backup not happening .following errror showing after every COMMIT command.
( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.
Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )
Manually I able to take Running-configuration backup through ftp int same lacation (ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .
View 1 Replies
View Related
Mar 21, 2013
I have a Nas4Free (FreeBSD) server on location A and another Nas4Free server on location B.
I need to regulary access to location B's some folder from Windows machine at location A. What is the best scenario for this?
I think to rsync those folders/files every night to location A, but then I think what if in the future there are many other locations (C, D, E, F) that need to be rsynced to location A, that will make location A need a very large harddisk space that maybe not available in the market or limit
by the hardware/BIOS support.
View 2 Replies
View Related
Sep 19, 2012
sometimes the ethernet led is not glowing even if the cable is plugged in. how can i resolve this?
View 1 Replies
View Related
Feb 10, 2011
If the hostnames are the same - can I restore the backup file from a wcs 5.2.148.0 instance on a different wcs instance running wcs 6.0.196.0?
View 1 Replies
View Related
Oct 4, 2011
Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message.
View 1 Replies
View Related
May 29, 2012
ow to backup Cisco ASA-5510 from a Linux server via TFTP?I do know how to backup a switch or a router. Basically creating an access list such as:
access-list 55 remark PERMIT hosts requesting TFTP access
access-list 55 permit host 172.16.0.27
and allowing access to
tftp-server nvram:startup-config 55
all this inside the router or the switch. From the Linux box just running a simple command such as:
tftp 172.16.0.3 -c get startup-config newbackup.conf
where 172.16.0.3 is the IP address of the switch and newbackup.conf is the name of the config file stored on the Linux machine.So, how do I do that with an ASA box? how to backup ASA from inside it.
View 1 Replies
View Related
Mar 3, 2013
Database backup on the LMS server is frequently failing due to job conflict and we have upgraded the lms from LMS 4.2.2 to LMS 4.2.3 to fix this but no luck. same issue we are facing again in the 4.2.3.
View 4 Replies
View Related
May 14, 2011
I recently went through removing some trojan files and malware on my computer with Kevin over in the Virus and Malware Removal section and my computer but the one thing that is not the same now is my wireless internet connection. I have a Netgear wireless adapter. Before I was using the Netgear utility to connect and now that's not even opening at startup just using the Windows Internet Connection utility, which is fine with me but it just won't connect automatically at startup. I have to go manually hit connect and enter my key for it to connect.
[URL]
View 11 Replies
View Related
Mar 21, 2012
Is it possible for AnyConnect to utilise the backup server defined in the connection profile when the session limit is hit on an ASA? Essentially if I hit the 250 limit on my ASA 5510 in Region A, will it try the backup server ASA defined in the connection profile which is in Region B?
From what I have read, the backup server only kicks in when the AnyConnect client cannot connect, but in this scenario it will connect but get an error message.
View 1 Replies
View Related
Aug 23, 2012
I have a problem with that the ACE20 (A2(3.2)) does send the connections to a backup real server in the serverfarm. I will how to troubleshoot in this case ? This is serverfarm configuration.
serverfarm host fix-http
failaction purge
probe PROBE-TCP-80
rserver fix11
inservice standby
rserver fix12
View 2 Replies
View Related
Jun 13, 2012
I have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance). The customer would like to know if LMS 4.2 is compatible with his backup agents :
* Symantec Veritas Netbackup (v7.1.0.2)
* Control-m (v6.4.01.300)
If not, what would be the best solution to backup the server ? Are the VMware tools supported now ?
View 1 Replies
View Related
Mar 10, 2011
I've been having a problem with my wireless network connection. Whenever I try and hit the Repair function,it will get stuck on Renewing your IP address for a moment, then change to: Windows could not finishing repairing the problem because the following action cannot be completed: Connecting to the wireless network. I have internet connection on this same computer.Another point to make is that when I click Repair and navigate to the Network Connections window, then hit F5 ( refresh the window ), the wireless connection will quickly refresh and connect normally without error.I won't have to open the Network Connections page and hit F5 anytime I need to repair the connection? Also, as of right now, it's still "Acquiring network address" even though I'm connecting and typing this message.
View 10 Replies
View Related
Jun 20, 2011
I have this idea of using my old computer (which is still pretty awesome) as a back up + production server. What this would entail would be that each person in my house has a dedicated hard drive that auto-syncs folders they've selected for backing up (not Memeo under any circumstances!). Then there will be a hard drive for me to work on web projects on. I'd like this computer to be very secure but if needed, I could show my work on the production drive to my boss.
View 6 Replies
View Related
May 31, 2012
I purchased the DIR-615 last week, and have experienced intermittent loss of internet connectivity, and automatic rebooting numerous times a day. A solid connection is up for 90% of the time; but you never know when connection will be lost. When connection is lost it automatically comes back after about 5 minutes with the router rebooting itself. I though I would ask for assistance here prior to taking it back to Fry's. I was previously using a 6 year old Linksys, and had no problems for years until it recently decided to die.
Specific information:
DIR 615
Hardware Version I1
Firmware Version 9.01NA (I updated from 9.0)
[Code].....
View 3 Replies
View Related
Mar 15, 2012
how can i take backup of startup config to tftp server through tftpd server.I am using 4506e switch
View 2 Replies
View Related
Nov 11, 2012
to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 Replies
View Related
