We upgraded to Cisco LMS 4.2.1 recently and we have noticed that every time we reboot our Windows VM Server the archived configurations from the network devices are no longer displayed. They do not appear in the archive, version tree or directory. We are meeting the minimum system requirements for running LMS 4.2.1 and we do not seem to have found any possible bugs related to this.
View 8 Repliesi have few devices in Cisco works, when i try to view their configuration. i get this error.DCMA0011: No configurations archived for the device(s). The selected device(s) should have at least one archived version.
View 1 Replies View RelatedWe use Cisco LMS Prime 4.1 to archive our Cisco Equipment configurations.
Now we want to store the configurations off site.
How do I delete archived email back to 2009 in Road Runner?
View 5 Replies View RelatedI'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
I have a vista, an xp, and a win7 computer networked. The xp is very temperamnetal, in that it randomly is accessible and just as randomly disappears. i often get the message "Computer (name) is not assessible...." The trouble is most acute in trying to access the xp machine from the win7.
View 4 Replies View RelatedAfter install the License for 25 AP more to a wlc 5508 with 100 AP base license and reboot WLC, the License base for 100 AP´s and this new one 25+, it's not anymore on the system, after reboot the WLC show 0 AP´s supported, and the only one license appear are 500 AP evaluation with Time expires.
View 1 Replies View RelatedMy internet speed was very slow so I re-set up my wireless network again. After re-setting up, my wireless network always disappears when all my wireless computer/phone get off the network for several seconds. When I try to get my wireless connection again, none of my devices can detect it. In addition, the light of the wireless sign on my router is constantly on (blue), but no device can detect the it. I always have to go to my wireless set up and save my setting again (no change to the current setting). What can I do to fix my wireless network, so it will be detectable at all times?
View 7 Replies View Relatedthe only change that survived power cycling is the change of default password that it forced me to do.
View 2 Replies View RelatedI got a wireless HP all-in-one PC and was able to connect to the Internet via the free Dlink wi-fi access point. Dlink no longer appears in the list of available networks. The network adapters are fine. I'm running Windows 7.
View 3 Replies View RelatedI have a network with a Western Digital NAS. Several computers are on the network, some connected via ethernet cable and some via wireless. The NAS has several shares that are password protected so that only certain users can map to them - each PC has its own private share used for backup.
The problem device is a Fujitsu Seimens Amilo laptop with Vista as the OS. When trying to display a map of the full network it is unable to display one - I have tried all of the solutions described by the Vista help but none of them work.When using Map Network Drive and trying to browse for the NAS, nothing is seen - the only computer showing on the network is the Vista laptop. If I type in the share name using \nas_nameshare_name it won't connect but if I use the IP address, such as \192.168.0.101share_name, then it does connect. I enter the password, select Reconnect at logon and the drive is mapped.
If I put the laptop to sleep the drive is still mapped when it wakes. The drive remains mapped for as long as the laptop is on but if I reboot it then the drive is lost. In fact, there are two mapped drives, one with a password and one without. After a reboot the drive with the password is still showing, but as a disconnected drive (double clicking brings up the password entry screen, and then the drive will be mapped). The drive without the password just isn't there at all.
here is my set-up.
(upstairs)
Windows 7 64 bit pc (2year old),
Netgear DGN2000 wireless modem/router,
Seagate GoFlex Home NAS drive,
D Link Powerline AV Network Kit,
(downstairs)
D Link Powerline AV Network Kit,
Yamaha RX-V671 AV Amp,
Panasonic TX-P42V20B TV,
TP-Link 5-port 10/100Mbps Desktop switch,
From the first time I set this up I have had problems in seeing all the folders I put onto the NAS drive for streaming to my TV and AV amp.Half of my music folders From the letter K upwards simply disappear from the menu view on my amp after I switch it off then back on the next time I want to listen to it. When I check the NAS drive on my PC, all the folders are still there but are not accessable downstairs on the amp.I can re-transfer the "missing" folders and it's fine till I next switch off and on again and its always from the same point that the folders are missing.The TV is also suffering from the same problems when I want to view photos and videos which are present in the drive upstairs but not visible on the menu on the TV (all missing on the TV!)Everything is connected with cat6 leads and I can stream internet radio (which is built into the amp) without any problems so it seems to me to be a communication problem between upstairs and downstairs.My house wiring has all the sockets on one ring main so that should be ok but I wondered if the router was not up to it with it not being a gigabit router.
just bought the DIr655 two weeks, everthing was fine except the wireless.almost every day around 6pm the wireless signal are disappear but the internet connection was fine with Lan, and i have to reboot the rounter inorder to get the signal back. i tried update the firmware but it it newest firmware on my rounter.
View 11 Replies View Relatedi have switch 2960 POE connected to access point WiFi Cisco when we connect the AP you can see it in the neighbor after 2 minute all AP disappear?
View 1 Replies View RelatedI have a Sony Vaio laptop which has an Atheros AR9285 wireless network adapter. My router is LinkSys WRT54G. I have configured this router with an SSID and encrypted using WEP.I created a network using 192.168.1.1, saved the configuration and then exited out.This creates a network that Windows "sees" in the list of available networks. However, for reasons I cannot figure out when I shut off my Vaio (I thought it happened when I powered down my router) why my available network does not "see" the network I just created.Under "manage wireless networks" I can see my network, but on the list of available networks it is not there. I then reconfigure the router and the network shows up. I at first thought it was a router configuration problem, but it now appears to happen when I shut off the PC - almost like I am not saving my configuration somewhere
View 10 Replies View RelatedI have a dir-655 Firmware Version 2.00, hardware:B1 It's a new wireless router and it's just a week ago I got it.My problem is that the wireless is just stopping to work, it just disappear.When I do a rescan of wireless AP's the ssid and my AP is not showing up.I have to reboot the router the hard way by unplugging the power source.I have multiple computers and wireless devices, and they all loose connection and no one even see the ssid (AP) defined on my dir-655.It's connected to a cable modem switch (without nat), I'm running dhcmp on my router. No Qos engine is enabled.This happens when I'm working from home with a VPN tunnel from my pc to my companies network.I've tried to make a ticket on this on dlink support pages, but their support system only works on IE7, and the password is anyway rejected. how to solve the termination of my wifi ap?
View 9 Replies View RelatedI got a strange incident happening to my work computer. Whenever i step away from my desk and come back only to find Icons of files mapped to other network drives other than my local drive have disappeared from desktop. I have to restart my computer to get these back. It only happens when i have walked away from my PC and I have verified that no one has sat at my desk to use my computer while I'm away. The other PC are also networked to the same servers as mine and theirs are not affected at all.
View 1 Replies View RelatedI have an annoying problem with networked printers disconnecting/disappearing when TS users logoff. Current configuration is: SQL server (WinSvr 2K8 R2 Std) has printers installed on it (standard TCP/IP Port) and printer is shared, there are also some printers installed on the DNS server and a couple of satellite offices. Users connect to TS servers (WinSvr 2K8 R2 & WinSvr 2K3) printers are connected and work fine until they logoff, when they log on the printers are gone "sometimes some printers are still there!?" I have tried logging onto the server as domain administrator and connecting printers but they won't even stay for administrator (have had this with win7 client machines) and tried directly 'console' at the server. I have looked at the printers on the SQL server and sharing properties, it is stoping printers from coming back at login on TS Note that local (client machines) connecting to the same shared printer from the SQL server don�t have the problem it's just on the TS server.
View 2 Replies View RelatedI have a dir-655 xtreme N gigabit router with 2.03NA version firmware. The wireless signal will suddenly and randomly disappear from my laptop. I checked the properties of the network connected it remains on the same channel when it reconnects so I figure it's not a channel issue.I have reviewed this forum for hours and have made many changes to my settings, but nothing seems to keep the wireless signal from stopping.
Computer: dell inspiron 6400
OS: windows XP pro (sp3)
ISP service: DSL
Modem: stand alone (Sagemcom 4300)
Router: dlink / xtremeN gigabit router / dir655
Set for mixed g, n and b wireless mode
Security: wpa-personnal / TKIP
Firmware: version 2.03NA
I've recently purchased a Linksys EA4500 router. I've got home, I've used the installation guide CD thingy, connected 3 of my laptops wirelessly, no issue there.However when I tried to connect my 4th laptop problems came along. The problem I was dealing with was that I couldn't connect to the router. I mean I could see the network name appearing in the list, but when I tried to connect the network would just dissapear from the list, not connect, and wouldn't back on the list unless I've reset the laptop. Anyhow I've ignored that computer because I thought it was two years old and it might have had a wireless network adaptor issue, although it was conneting with no problem to my former router D-Link DIR 365.Anyway, just yesterday I've purchesed a brand new netbook (Evolio U9) and it doesn't see my router, although it sees all the other connection availables (my neighbors' wirless networks), I even connected to one of them just to test if anything was wrong with the netbook.
I also have problems when trying to connect with an Iphone 4. Well, it does connect, but the connection to the iphone just goes on and off making it impossible to use. It's really strange that all the 3 Iphones in my home have no issue connecting, not even my Glaxy S3, nor any of the Smart Tvs, nor the printer.Does the router have any number of limited connections available? The router configuration is the ones done from the CD. I've only assign a SSID and a WPA password.Please note that all the computers above are GENIUNE Windows
My devices configurations are not getting backed up.
View 1 Replies View Relatedhow to connect UTP cable
View 1 Replies View RelatedPlatform: LMS 3.2.1 with RME 4.3.2 on Windows 2003.I'm having a problem with several devices that were backing up fine until this week - suddenly they aren't backing up their running configurations, but RME is fetching their startup configurations fine and VTP backups are fine. At first I thought it might be timeouts, so I used inline edit to incease the telnet timeout for a device to 180s. However, the job fails well within this time period (debug shows on i/o error?). My order of protocols is SSH, Telnet, TFTP. I took a stab in the dark that this suggested a database problem so I picked one at random and deleted it from DCR, and readded it and it worked. However, for the other 48 devices affected it did not.
I'm wondering if I need to do anything to the RME database to get things back to where they were? Do I need to reinitialize the RME database, and if I do that what do I lose? [code]
I would like to have a support on AIR-AP1142N-E-K9 configurations.How I can config this AP?
View 1 Replies View RelatedI was recently given a Cisco 7200 VXR and told to erase the stored configurations in it. how to do erasing of Cisco 7200 stored config else I might have to delete them line by line.
View 4 Replies View RelatedI like to know how I can save or export all of my devices configurations to an FTP server for example.Cisco Prime LMS 4.2 appliance.
View 4 Replies View RelatedWhat module is used to push configurations in LMS 3.2.1?
View 1 Replies View RelatedHere is my basic network layout for multicasting for Syn-apps
Multicast Source-->3750 SW (add PIM SM-DM? Yes/No)-->3845 WAN Router (add PIM SM-DM? Yes/No)-->T1-->2821 (add PIM SM-DM? Yes/No)-->3560 SW (add PIM SM-DM? Yes/No)
OK, in this is it necessary to configure "IP Multicast-routing" on the switches? Do I configure PIM on all interfaces that will handle multicasting (router and switches?) If PIM is enabled on the 3750 do I need PIM configured between the 3845 and the 2821 ? Do I configure the Auto-RP on the 3750 or the 3845 ?
I have this firewall working as active/standby. Everything seemed to be ok, but we noticed that confirgurations are not being replicated by saving configuration either copy run start or write. The workaround here is write standby command. Below the configs and stats, plus the show version, which is the same in both equipments:
Header 1
failover
failover lan unit primary
[Code].....
We have a number of 2651XM with WIC-1ADSL. These are supplied by another company and we do not have access to the configs.We are told that the maximum througput from the ADSL WIC to the FastEthernet 0/1 is 2.5Mbps ( "it's a backplane issue" ), even though the ADSL speed reported by the router on the external interface is 8MbpsT
View 3 Replies View RelatedWe are deploying over 20 RV180W Routers for a client and need to find a faster way to configure them for shipping.We have created a base image (all settings that will be shared between the 20 locations), we need an easy and quick way to make IP changes for the 3 VLANs and Local Security Groups for the IPSEC VPN.I tried to edit the CFG file by hand, but the checksum fails when it is loaded into the RV180W.How can I accomplish this? Can I manually create the checksum?Can I remove the checksum?
View 3 Replies View RelatedI have an ASA 5505 without any IPS module.While copy/pasting some configurations from another 5510 with IPS I copied my mistake the some of the IPS configurations part. Now I can't remove it.When ASA starts I get this Warning:
...WARNING> IPS policy is configured without an SSM card.
*** Output from config line 828, " ips inline fail open"
Those lines are:
policy-map Outside_Policy
class IPS_class
ips inline fail-open
When I try to do "no ips inline fail-open" I get an "invalid input detected".If I try a no class IPS_class I get that is being in use.What can I do to clean up those lines?