LinkSys WRT54G Router - Available Network Disappear In Windows 7
Jun 16, 2011
I have a Sony Vaio laptop which has an Atheros AR9285 wireless network adapter. My router is LinkSys WRT54G. I have configured this router with an SSID and encrypted using WEP.I created a network using 192.168.1.1, saved the configuration and then exited out.This creates a network that Windows "sees" in the list of available networks. However, for reasons I cannot figure out when I shut off my Vaio (I thought it happened when I powered down my router) why my available network does not "see" the network I just created.Under "manage wireless networks" I can see my network, but on the list of available networks it is not there. I then reconfigure the router and the network shows up. I at first thought it was a router configuration problem, but it now appears to happen when I shut off the PC - almost like I am not saving my configuration somewhere
View 10 Replies
ADVERTISEMENT
Jun 24, 2012
I've recently purchased a Linksys EA4500 router. I've got home, I've used the installation guide CD thingy, connected 3 of my laptops wirelessly, no issue there.However when I tried to connect my 4th laptop problems came along. The problem I was dealing with was that I couldn't connect to the router. I mean I could see the network name appearing in the list, but when I tried to connect the network would just dissapear from the list, not connect, and wouldn't back on the list unless I've reset the laptop. Anyhow I've ignored that computer because I thought it was two years old and it might have had a wireless network adaptor issue, although it was conneting with no problem to my former router D-Link DIR 365.Anyway, just yesterday I've purchesed a brand new netbook (Evolio U9) and it doesn't see my router, although it sees all the other connection availables (my neighbors' wirless networks), I even connected to one of them just to test if anything was wrong with the netbook.
I also have problems when trying to connect with an Iphone 4. Well, it does connect, but the connection to the iphone just goes on and off making it impossible to use. It's really strange that all the 3 Iphones in my home have no issue connecting, not even my Glaxy S3, nor any of the Smart Tvs, nor the printer.Does the router have any number of limited connections available? The router configuration is the ones done from the CD. I've only assign a SSID and a WPA password.Please note that all the computers above are GENIUNE Windows
View 9 Replies
View Related
Jan 18, 2009
I am looking for WRT54G v7 Windows 7 Drivers. I can seem to find it. If there is no update yet, need drivers for Windows Vista 32 instead.
View 9 Replies
View Related
Jul 6, 2011
will my linksys wrt54g v8 work with windows 7 with a 64 bit. are there drivers available?
View 3 Replies
View Related
Sep 10, 2011
I'm trying to load the linksys software from my CD to reset my WRT54G router and the software will not run because it is not compatible with Windows 7. Where do I find a new version. I do have network access at this time.
View 1 Replies
View Related
Jul 7, 2012
I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies
View Related
Jan 4, 2012
I have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.
View 8 Replies
View Related
Apr 28, 2010
I have a Linksys WRT54G router; have a cable internet connection through the router; and two wired desktops, one running Vista (32-bit) and the other XP. I would like to replace the XP machine with a wired desktop running Windows 7 (64-bit).
View 8 Replies
View Related
Aug 4, 2011
I have a vista, an xp, and a win7 computer networked. The xp is very temperamnetal, in that it randomly is accessible and just as randomly disappears. i often get the message "Computer (name) is not assessible...." The trouble is most acute in trying to access the xp machine from the win7.
View 4 Replies
View Related
Feb 14, 2012
My internet speed was very slow so I re-set up my wireless network again. After re-setting up, my wireless network always disappears when all my wireless computer/phone get off the network for several seconds. When I try to get my wireless connection again, none of my devices can detect it. In addition, the light of the wireless sign on my router is constantly on (blue), but no device can detect the it. I always have to go to my wireless set up and save my setting again (no change to the current setting). What can I do to fix my wireless network, so it will be detectable at all times?
View 7 Replies
View Related
Mar 3, 2010
I recently had trouble connection to my Linksys WRT54G router. However, in this process I had to create a couple of new profiles/networks/SSID or whatever they are called. I now have one functioning network, but my router is still broadcasting the other two networks. How can I get my router to only broadcast the one network, I am currently using? I erased them from Vista, so that my own computer does not automatically log on to the, but that is clearly not enough. Since one of the networks is not secured with a password (dont ask why), my concern is that my neighbours can access it. BTW, I am using Windows Vista on a Toshiba Satelite A200.
View 5 Replies
View Related
Jul 8, 2011
I've downloaded the driver for a tenda usb adapter. What else do I need to do to connect to the WRT54G network? I'm currently connected via an ethernet cable. Running Windows/7.
View 1 Replies
View Related
Nov 18, 2012
I have a WRT54G version 3.. i have finished installed it using the web based set up but i can't connect my mobile through the wireless network.
View 1 Replies
View Related
Apr 27, 2013
I have the following equipment
E2500 wireless N router (2 of these)
WRT54g router (B/G)
WAP54g access point (B/G)
I am planning to set up a wi-fi network for a single story motel. It is C-shaped; about 300 feet along the longest side with "legs" of 120 and 70 feet. I have included a diagram that I drew for the person that will install it. Until now I have only used that single WRT54g in the office for the entire property and it covers about half the property (left side) but not well and with a dead spot in the top left because of too many walls to go through.
My plan starts in the office (bottom left) with a WRT54g connected to the DSL modem as it always was. That would be connected to one of the E2500s in the middle so it can cover the most area. From there two others would shoot out to each corner (the other E2500 and the WAP54g). They will all be wired together with Cat 5e "riser cable". The routers will be placed in a wide open attic.
1. Is this is a good plan for the size of property? I have heard that N routers have a range of 150ft in every direction so that's why I'm putting one in the middle. Keep in mind that while the attic is open and wood constructed, the walls between rooms are concrete firewall and they haven't been wi-fi friendly. Hopefully putting them in the attic takes care of this.
2. Does starting with a B/G router at the modem mean the N routers will revert to B/G?
3. What are the main settings I need to know about? What "mode" does each need to be set to? Do they need different default gateways?
Can I use the same password/security for all of them? Should I use the same SSID for all?
View 4 Replies
View Related
Jul 14, 2007
Am trying to set up a laptop computer to my wireless network (WRT54G V6)
View 9 Replies
View Related
Feb 21, 2012
how to add a WRT54GS V1 wireless router (Router B) into my existing WRT54G V2 Wireless network (Router A). The main router WRT54G V2 router (Router A) is located upstairs and is the link to the ISP (Internet).
- DHCP active
- Wireless MAC filter is enabled with only approved MAC's
- Wireless SID Broadcast is disabled
The secondary Router WRT54GS V1 (Router B) will be located down stairs with no Ethernet cable between the two routers.
- Will need this secondary router to connect to the existing wireless network Router A wirelessly.
- Will need to have internet access.
- Will need to have the wired ports to have internet access as well. Needed to connect the Home A / V receiver to update A / V firmware.
View 9 Replies
View Related
Nov 29, 2011
Yesterday i was playing online on my Xbox 360, and was disconnected from the internet. I came downstairs to reset router/modem, once doing so i went into the router settings for my Linksys WRT54G. My modem by default uses the 192.168.1.1, so my router was 192.168.2.1... So i powercycle, log into router settings through 192.168.2.1 and start setting up my port forwarding for the xbox ports. Saved Settings, and the page would not load to say "Settings Saved". Closed the window and now my pc says no internet connection. I had to create a VPN broadband connection to even use the internet on my pc. I can no longer log into 192.168.2.1 for my router, nor can i access 192.168.1.1 to even get into my modem settings.. I'm using windows 7, and the automatic troubleshooting guide tells me to powercycle my modem. My xbox can still see my wireless network "linksys" but will not connect to it, even with the VPN connection i am still hooked though my router and modem.. Im afraid that my router just out of nowhere "died"..
View 2 Replies
View Related
Feb 4, 2013
I am using Linksys WRT54G ver 1.05, XP Pro, DSL Modom & IP Address 192.168.1.104 Fails
View 3 Replies
View Related
Nov 25, 2011
I got a strange incident happening to my work computer. Whenever i step away from my desk and come back only to find Icons of files mapped to other network drives other than my local drive have disappeared from desktop. I have to restart my computer to get these back. It only happens when i have walked away from my PC and I have verified that no one has sat at my desk to use my computer while I'm away. The other PC are also networked to the same servers as mine and theirs are not affected at all.
View 1 Replies
View Related
Feb 8, 2012
I have an annoying problem with networked printers disconnecting/disappearing when TS users logoff. Current configuration is: SQL server (WinSvr 2K8 R2 Std) has printers installed on it (standard TCP/IP Port) and printer is shared, there are also some printers installed on the DNS server and a couple of satellite offices. Users connect to TS servers (WinSvr 2K8 R2 & WinSvr 2K3) printers are connected and work fine until they logoff, when they log on the printers are gone "sometimes some printers are still there!?" I have tried logging onto the server as domain administrator and connecting printers but they won't even stay for administrator (have had this with win7 client machines) and tried directly 'console' at the server. I have looked at the printers on the SQL server and sharing properties, it is stoping printers from coming back at login on TS Note that local (client machines) connecting to the same shared printer from the SQL server don�t have the problem it's just on the TS server.
View 2 Replies
View Related
Nov 13, 2009
I have been using this router fine for a year now. Now I can only get on the internet if I am directly plugged into the modem. It says I have limited connectivity. My ISP is Comcast. I have tried resetting the router with no luck. I have tried to update the drivers but I cannot even log into 192.168.1.1. I am in dire need of the wireless cpability. When I go to the run command and type ipconfig it tells me I have no default gateway.
View 9 Replies
View Related
Aug 28, 2011
So I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it. My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date. I've upgraded to the latest router firmware.
[Code]....
View 4 Replies
View Related
Feb 8, 2012
I have a wrt54g router and would like to separate the WLAN clients from accessing computers and servers on the LAN... in other words I would like to make it a "guest" network. I've put the router in "router" mode instead of "gateway". I just want to be sure if that is the best thing I can do in terms of turning the wireless network into an isolated one.
View 4 Replies
View Related
May 28, 2012
i have a linsys wrt54g router. my main computer is connected (wired) and works fine. until today my wireless devices were able to connect and access the internet using the router. now the ssid does not show as a possible network connection. i have unplugged everything, rest the router, checked setting, shutdown and reset every computer and all my wireless devices still cant locate the network connection???
View 9 Replies
View Related
Aug 23, 2011
My network keeps losing the lock icon that displays with the network name. I think this is happening with power shortages or outages. I have checked the settings online and it says WPA Preshared Key. Is the network still secure? I have a WRT54G wireless router.
View 1 Replies
View Related
Mar 12, 2011
Here's what I have so far which involves 3 computers:
PC1 has : Window XP w/ Linksys WRT54G w/ Linksys software installed
PC2 has : Windows 7 connected to router via cable
PC3 has : Windows XP connected to router via wireless
My goal is to make my new Windows 7 (PC2) the primary computer just like a server which handles the router and other stuff like printers, scanners, etc. I want to swap the Linksys WRT54G on PC1 to be on the new PC2 (Windows 7) so that the router can be configured and monitored on that machine.
My guess is that I just simply install the Linksys WRT54G's software to PC2 and make the necessary settings just like the XP machine (PC1) and I'm done. Do I need to UNinstall the router's software on the PC1 (XP) machine first? Do I disconnect my internet connection on my PC1 machine?....or do it really matter?
View 1 Replies
View Related
Apr 20, 2012
I have a WRT54G that has served us well for several years, but I needed a network connection in another part of the house, both wired for TV, and wireless for downstairs. So I ran an ethernet cable through the house and connected it to my new E1200. It's connected to Port 1, not the Internet port. The TV plugs into Port 2, and my Apple TV to port 3. So far so good, TV and Apple TV appear to work fine. Wireless is where I'm having problems, the wireless signals between the two routers appear on Wifi Analyzer I'm using. Both appear strong in signal for a second, then they disappear, then they appear again for a second, then they disappear. So the wifi's signals appear, then disappear and this cycle continues.
The WRT54G is setup with DHCP, channel 6.
IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 DHCP Server: Enabled Start IP Address: 192.168.1.100 End IP Address: 192.168.1.149
The E1200 DHCP is disabled, channel 11, 20mhz.
Router IP Address: 192.168.1.2 Subnet Mask: 255.255.255.0 DHCP Server: Disabled Start IP Address: 192.168.1.1 (DHCP disabled) End IP Address: 192.168.1.50 (DHCP is disabled)
I've tried both routers named the same, and then tried 2 different names. I've rebooted them as well after making changes.
View 3 Replies
View Related
Oct 30, 2012
I have a Cisco network at my office and the router and everything is set up under my desk.I can use the internet just fine on my office computer but I am trying to use it on my laptop and login to the guest account .I ran across the Cisco Connect sofware and that I need it to find the password but the problem is I dont think I have a router or whatever it is that is compatible with this software I am using WRT54g wireless n router, the models on the site for the cisco connect are e series
View 1 Replies
View Related
Jul 2, 2011
I've tried looking for solutions on the windows seven forums and all over Google but none of them worked.The problem is, sometimes I get an "Unidentified Network, No Internet Access" error on my laptop (wireless). When this happens, the lan speed drops to 1.0 mbps and I get the "No Data Received" error when I try to load pages.My internet is on fine and my brother can access the internet fine on a desktop which is wired to the router and modem. My mom's notebook sometimes gets this error as well.
Is there any real solution for this problem or known compatibility problems between my WRT54G (version 1.1 I think) and Windows 7? Really need a solution to this, before I had to re-setup my whole connection, I didn't get such a problem. My laptop doesn't get the error in the school network either.
View 2 Replies
View Related
Aug 29, 2011
I suddenly am unable to print the settings on the My Network Settings. When I click on the print sign nothing happens - it does not register on my printer. I used to be able to do this. My router is WRT54G and my printer is HP Officejet J3680 All- in-One.
View 1 Replies
View Related
Nov 25, 2011
Our wireless network has started to drop out periodically. If we pull power and restore, the network immediately comes back up on all our our devices. We have the WRT54G, and we have 2 PCs, 2 Macs, and 3 iPhones, and a wired home phone. Normally there are not this many devices connected, but with everyone home for Thanksgiving and all these devices on the network we have started to see this issue.
Are there simply more devices than the router can handle? Is one of the devices crashing the network for everyone? What typically will cause something like this?
View 2 Replies
View Related
Mar 1, 2011
I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.I'm trying to forward port 88 on my Linksys WRT54G Version 6.I tried that but Boardwave audio streaming server still says it's not open!Here are some pictures: I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
View 7 Replies
View Related
Aug 16, 2011
I have a crappy router/modem from comcast with two windows machines and a linux web server connected. I also have another router, a Linksys WRT54G with DDWRT firmware with WAN connected to the modem/router. The linux web server has a static IP, configured with /etc/network/interfaces The network goes down randomly. Disconnecting and rebooting the linux web server usually fixes it. It's possible that the WRT54G could be at fault as well.The problem is that I just don't have any information on what is happening on the network. (Well even if I had the information, I'm not sure I would know what to do with it) I installed wireshark, I figure I should just leave it running until the network goes down, then I can go through the packets and see if I see anything weird?
View 4 Replies
View Related
