Cisco AAA/Identity/Nac :: ACS 5.1 Integration With NGenius Server
Mar 8, 2011
I'm currently working on ACS 5.1 to use it as AAA server for Netscout NGenius.I followed a guide for ACS 4.2 and tried to replicate the configuration settings in ACS 5.1.
- created a host profile on network devices and AAA clients having the same shared key with NGenius
- added three (3) NGenius required attributes in system administration > configuration > identity > internal users
- added attribute values to Internal User database
- created an access policy:
* identity pointing to Internal Users
- edit serverprivate.properties in NGenius server to match the requirements
I would like to have NGenius authenticate via ACS 5.1, but as of the moment there is an error message that I receive:
Unicentified error, Code=16510, Details: AV pairs do not match NGenius format ::<insert tacacs username here>, Severity 1, Code: 16510.
View 2 Replies
ADVERTISEMENT
Oct 20, 2012
We are currently evaluating ISE and I am stuck with the PEAP authentication (with Server side Cert).Our current setup consists of two 5508 controllers, 30+ access point. For authentication we are using PEAP with (server side Cert). We have an IAS server which is also acting as a CA server. We are using Cisco’s NAM as a supplicant on Windows XP & 7 workstations. I would like to use ISE for authentication. I would like to use PEAP with Server side Cert (similar setup like IAS). I want ISE to perform the same function in addition to profiling etc.....
I was able to integrate ISE with Active Directory but could not get it working with PEAP (server side Cert). I would also like to know if they used Microsoft’s CA server or Open SSL CA server or a third party CA server (Go Daddy, VeriSign etc.)Can you we ISE as a CA server just the way we used Microsoft’s IAS Server as a CA Server?
View 8 Replies
View Related
Mar 14, 2011
first i configure the ACS to Synchronize time from AD as NTP server second when i configure the integration between the ACS and AD and test the connection there is no output from this test but i see that the domain is connected and the end of the page the problem is when i try to navigate the groups by go to directory group and use select there is no output.
View 3 Replies
View Related
Apr 15, 2013
Is it possible to integrate a WLC with a NAC 4.9(1) L3 OOB? I can't find any documentation that says that it is possible or not.
View 9 Replies
View Related
Dec 24, 2012
I have Integrated the ACS 5.3 with AD.Now my next goal is to Integrate ACS with RSA in such a way that all my Cisco devices should use the username and password from the AD.The enable privilege level should come from the RSA Token OTP.Is it possible to do such a thing with ACS 5.3?
View 3 Replies
View Related
Nov 20, 2011
We have a customer who wants to configure his guest wireless network in such way that the guest should fill in a self registration form and generate the username and password themselves. For this purpose we are using cisco ISE but we don't know how to integrate it with cisco WLC.
View 1 Replies
View Related
Jun 24, 2012
We have an ACS running 4.2. I am sure that this ACS is talking to our AD database because our wireless users (using ACS as RADIUS servers) are able to log in using their Windows AD account.
However, I am not sure how ACS is integrated with AD. Our ACS is installed on a windows 2003 R2 server. I am not sure where the AD database is? ie,if AD is on the same server as ACS OR on a different server [ADs managed by different group altogether :-( ].
How is the integration done between ACS and AD when both are on the same windows server? And How is the integration done between ACS and AD when they are on different windows servers?
ACS is software installed on windows 2003 R2 server.
View 2 Replies
View Related
Jul 13, 2011
I have configured my WLC 4402 for Radius authentication using Cisco ACS server version 4.2 Patch 4. When using Local Database of ACS my Wireless Users are able to authenticate but users are not able to authenticate from External Database of Windows AD 2008 R1.
In ACS logs I am getting the this error- Authentication session timed out. Challenge not provided by client.
View 3 Replies
View Related
Jan 29, 2013
We've an issue with authorization on NCS system. NCS successfully integrated witch ACS, but there is a problem with one user. All users have equivalent rights under root. There is shell profile with all possible tasks (exported from NCS server) configured on ACS. All users exept this one (unlucky one:)) authorizes successfully. In ACS logs, authentification and authorization status for this user is passed and all attributes (policy, profile, AV-pairs e.t.c.) is the same as for another users. This 'unlucky' user gets a following message: There is surely no browser or network issue. Tried from different PCs with same result. There is no any local info related to this username on the NCS server. When i change one charecter in the username on his ACS account, everything works well.
Our ACS v
Version 5.1.0.44.X
And NCS
Version : 1.1.2.X
View 1 Replies
View Related
May 15, 2011
integrated the Cisco ACS 1121 with 5.1 and AD and been able to use multiple policies to permit or deny access to different NDG? I am able to authenticate agains AD but I am having an issue with getting the policies to use the user memberOf attribute to set access levels.
View 1 Replies
View Related
Jun 22, 2011
provide me Step by Step procedure for integrating LDAP with ACS 5.2 .
View 1 Replies
View Related
Oct 23, 2012
know about Domino LDAP ? I would like to integrate this LDAP with Cisco ISE.I try to bind this LDAP but it does not show me anything in "Naming Context". So I cannot choose group to map into ISE.I test this on WLC. It is success to do but cannot make the same thing with Cisco ISE.Is this LDAP supports with Cisco ISE 1.1.1 ?
View 3 Replies
View Related
Aug 24, 2011
I'm attempting to integrate an acs 5v into the domain through the gui. The connection will establish, and the status will read 'connected', just as it lists the domain I've submitted. However, I can't seem to find anything listed under the directory groups, and when I run a connection test, I simply get 'Global Catalogue port status error.' Eventually, I'd like to configure this as a radius server.
View 1 Replies
View Related
Nov 1, 2011
I have an ACS 5,2.0.26-8 running on VM intergrated with RSA. Users are able to login using their RSA passcode for network management utilizing TACACS. The problem seam to be related with RSA token caching. Once a user login sucessful on device A using current token he can not login with the same token on another device. User must wait for a new token and then he can login again. Before moving to ACS 5.2 we were using ACS 4.2 (intergrated with the same RSA) and back then ACS 4.2 cache passcode so user where able to login on devices using the same passcode. When the token change user have to use the new one. providing the same functionality like the "Token Card Settings" Durantion option under group properties, to cache token for a specific period. The global option for caching under RSA definition on 5.2 does not solve the problem.
View 4 Replies
View Related
Apr 24, 2012
A customer uses Active Directory where some group names contain special characters (ç ~ '^). The Cisco ACS 5.2 is presenting the warnings: "Not all Active Directory user groups are retrieved successfully. One or more of thegroup's canonical name was not retrieved "(Category CSC Oacs_ Identity_ Stores_Diagnostics; code 24457).
What are the results of these warnings to the customer's network? Slow? Loss of access?
View 1 Replies
View Related
May 29, 2012
We have Nexus7009 at client network but due to limitation of Nexus switches that they can not be directly integrate Nexus with RSA so client has purchased cisco ACS for the AAA. We are able to do the authentication and authorization via ACS.However clients wants to further integrate the ACS with RSA so that authentication should happen via RSA and authorization should happen ACS. Is that possible ? if yes, how can i configure the ACS ?
View 5 Replies
View Related
Oct 21, 2010
configure the Cisco ACS to authenticate the users from MS Active Directory. Cisco Acs = 4.2.1(15)Currently, i have multiple users configured as local databse. but now i want to authenticate with the domain users.
View 11 Replies
View Related
Aug 24, 2011
Domain A (Forest 1) <--Two Way Trust--> Domain B (Forest 2)
ACS is joined to domain A.
My question is AD integration (Not LDAP) supported between 2 domains in different forests?
View 1 Replies
View Related
Sep 18, 2012
I have a ACS version 5.2 (TACACS) where I require equipment integrated with Sandvine, I currently looking information and very little to manage the integration of ACS with these teams Sandvine.
I have an information on the provider Sandvine with a guide to the case where only states:
TACACS + server
On a TACACS + server, each user entry must allow the service "Sandvine". Within this
service, the attribute-value pairs Following can exist:
• An attribute named "Sandvine-Group" of type string.
[Code]......
View 4 Replies
View Related
Jan 26, 2012
I am having an issue upgrading from 4.1 to 5.2 in regards to interoperability with our SafeConnect appliance. When I bring 5.2 online, Safe Connect reacts and causes network outages.
View 0 Replies
View Related
Dec 13, 2012
I'm having a issue when configuring Cisco ACS 5.2 appliance 1121 to integrate windows 2000 Active Directory as an External Users Database.I'm using an account with administrator privileges on AD (can create computer objects).The ACS register itself successfully to the domain but it doesn't retrieve the AD Groups, even when i change the seach base and filter.At this link says that ACS supports AD over Windows 2003, 2008 and 2008R2 but it doesnt say that not supports Windows 2000.[URL]
View 2 Replies
View Related
May 24, 2011
I have just recently purchased a 5505 Controller and 30 3502i AP's. On my main corporate WLAN, I would like to allow users to be able to authenticate via Active Directory username and password.I am also looking for as little client side set up as possible. From what I have researched, I will need to use some type of EAP method.
I have come across two methods that appear to be the top contenders.
EAP-FAST - The method seems to be a possibility but I see that it uses certificates. If I use this method, does it mean that I would have to import the certificates to each machine manually? Also, can I configure thsi to work with just the 5508 Controller and an AD Database server or do I need an intermediary like IAS or ACS?
PEAP/GTC - This method is also a possibility and I think that it does not require certificates. Does this also require an intermediary like ACS or IAS.
View 3 Replies
View Related
Oct 21, 2011
I wants to inegrate Juniper netscreen firewall in Tacacs Cisco Acs 5.1.As I go through Juniper KB which mentioned that I need to enable Netscreen Service in Cisco ACS 5.1. how to enable Netscreen service in Cisco Acs 5.1 and how I got Further to integrate Juniper Netscreen Device in Cisco cs 5.1
View 2 Replies
View Related
Dec 5, 2011
Can I authenticate users/administrators managing ACS5.3 via GUI and CLI against Microsoft AD. I think I heard it from someone from Cisco when a lot of improvements were introduced in ACS5.3 that I can do it. Doesn't seem to be available still
View 3 Replies
View Related
Dec 17, 2011
While configuring LDAP , I got struck in “Step 3 - Directory Organization”. How to make this work? My aim is to make users authenticated from their windows domain usernames and passwords while they log in to AAA clients.
View 1 Replies
View Related
Jul 19, 2012
We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory.Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
-MDM can be integrated to ISE ?
-How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
-What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
-If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
-Is MDM will do client provisioning or ISE should do ?
-Is MDM send or update patches of Mobile Devices ?
View 5 Replies
View Related
Mar 21, 2011
we Bough new mcs server in order to install ACS 4.1,now acs is running on normal PC and its fully configured , so now i want to back up the acs database and the configuration file in order to install it in the new server so how to do that
View 4 Replies
View Related
Mar 1, 2012
Is integration of LMS 3.2.1 with ACS 5.3 now possible ? (I understood from this forum that early ACS 5.x could not integrate wih LMS 3.2, but that this feature would be restored at one point in time (5.1?)).
View 1 Replies
View Related
May 9, 2011
I need to patch our ACS server to 4.2.0.124.17 from 4.2.0.124.6. My question is, do I need to apply the same patch to our remote agents? Cisco's documentation only states that both the ACS and the Remote Agents need to be 4.2.0.
View 1 Replies
View Related
May 23, 2013
I am wanting to generate a signing request for an ACS 5.3 box to send to a Microsoft CA. Is there anyone out there using a MS CA for eap-tls?
View 1 Replies
View Related
Dec 7, 2009
I'wont to upgade my ACS server 5.0.0.21 to 5.1 . I wont to use Active Directory . it's seem that in my curent version AD is not supported !
View 12 Replies
View Related
Apr 21, 2013
I am looking for any PDF, recomendation, link for best approach for secondary ACS as resiliency.
View 4 Replies
View Related
Mar 2, 2011
We have enabled EAP-TLS authentication for our wireless LAN end user in our network setup , And we have defined certificate on our old acs server 3.3 from a third party CA . I want to use the same certifcate which is being used in 3.3 ,how i can copy that certficate from 3.3 and get it installed on new acs 4.2 .
View 7 Replies
View Related
