I'm changing SSL VPN from aaa authentication to both aaa and certs, Server 08 CA, 8.2 ASA 5510, ssl client 2.5.1025 and Windows 7 users. My question is what should be the template of the id cert that I receive from CA. ,
View 16 Replieswe are using Cisco Aironet 1130 AG and a Cisco 4402 WLC in our network. The certificate service is installed on a Windows 2008 R2 server. We use a standalone Root CA with a Enterprise Sub CA hierarchy. Issueing certificates to clients works fine. The vendor and ca certificates are installed on the WLC and the user have his user certificate. During implementation we used following document: url... Instead of Anonymous Bind, we use a service user to read in AD (works fine, too).
We use the Intel/PRO wireless utility on our Testclient and configured it for EAP-FAST and TLS. We can select the installed certificate in the utility, but when we try to connect, the utility throw the message: "Authentication failed due to an invalid certificate".We´ve logged the WLC and thats a part of the logfile (i´ve greyed out all enterprise data): [code]
I am doing a proof of concept with anyconnect and certificate authentication. with 3.0 i was able to do this with a certificate from my CA and a client cert in a smartcard. I have upgraded to 3.1 and now it doesnt work anymore ( i need 3.1 and Asa 9.0 because of IPv6 Split-tunneling).Reading the forum i got some info that the ASA cert must have a EKU value of 'Server Authentication' and the client cert must have a similar EKU (client Auth)
View 4 Replies View RelatedThe IPAD VPN works great over token, radius and local authentication. But now we need to authenticate vpn client via digital certificate (only vpn authentication between client and gateway)? I'm not sure which certificate we should buy to authenticate vpn client.The plan is to install digital certifiacte on VPN Gateway (CISCO ASA 8.0.4) and IPAD Cisco IPSec client to eliminate user/pass authentication.
View 9 Replies View RelatedI have configured SSLVPN on a asa5520 with aaa and certificate authentication.Both authentication works fine,but I find the client users can use any others' certificate to authentication,I want to binding the aaa account to user's certificate.everyone must use their own certificate.
View 1 Replies View RelatedI am using a cisco asa5520 and i have set up remote access vpn with an AnyConnect connection profile.In the connection profile i have set up that users should authenticate using both certificate and AAA.Due to a high security requirement, the user certificate is issued from a 3rd party. This is working fine and the user now need a valid certificate and a username/password to authenticate successfully.I added the CA certificate as a associated trustpoint on the ASA box to get the certificate verification working.Problem:If Jane and Joe both have a valid certificate AND a valid username/password, Jane could authenticate using a combo of Joes certificate, and Janes username/password. Both are valid (isolated), but i only want jane to be able to authenticate with her username/password and her personal certificate.
View 1 Replies View RelatedLooking for the steps to configure wired clients using certificate authentication only
- i.e., once a certificate is presented to the ACS that is issued by a trusted CA, the connection is permitted.
No need to tell me about switch configuration.
I am using wireless system with certificate athentication ( CA Server ) and RADIUS server.
I want to know if certificate is not installed and configured in wireless client laptop.
Do client get athenticate in wireless system and get access of wireless network ?
Also want to know any configuration required in WLC CISCO 4402 for authentication with CA server of client laptop.
Our ACS (5.3) has self signed certificate, we have exported it and declared it in Certificate Authorities.We have exported it to have a Trusted Certificate for client machine.
This certificat has been installed on a laptop.The wlc is successfully setup for eap (peap & eap-fast has been tested > ok)I have this error in the log:
12514 EAP-TLS failed SSL/TLS handshake because of an unknown CA in the client certificates chain.I think the Access Policies (identity & authorization) are misconfigured: [code]
Is there a way to authenticate a windows computer in ACS 5.2 for 802.1x only with a certificate.The Computer is from a different active directory than the one that is configured in ACS.I tried importing the cert into "external indentity Stores" > "certificate authorities", then setup the computer to use smart card or certificate, then selected the certificate from the other AD.when i look at the ACS log, here is the message i can see: 22044 Identity policy result is configured for certificate based authentication methods but received password based
View 1 Replies View RelatedI am enabling our wireless controllers to use 802.1x authentication for our wireless clients. Both computer and user are provided with certificate from CA server.I have 9 APs and 2 controllers installed in my infrastucture, one of the controllers is working fine with setting specified above but the other one is not.Both has same configuration and both seems identical with same model and IOS.
View 3 Replies View RelatedWe use a combination of Cisco ACS and Cisco catalyst 3560 switches for network authentication and authorization. Clients (Windows XP) have a certificate installed which will grand access to the network and put them in the correct VLAN. So far, so good. Some users are testing with Windows 7 in the same set-up as above and run into strange behaviour. The problem is that after a random timer the machine gets de-authenticated and nothing besides a reboot works to get the computer authenticated again (from a Windows point of view). It looks like this only happens to users who are using a certificate to authenticate, Windows 7 MAC bypass users have no such problems. If it occurs, the following logging appears in ACS: [code] We are using ACS 4.2(0) Build 124 and 3560-48PS switches with IOS 12.2(55).
View 4 Replies View RelatedThe problem is that with any EAP method of authentication that utilizes authentication with a certificate or smart card the switch will somehow impede authentication with the radius server. The EAP Methods I have tried on a SG-300-28P and ESW-540-24p switch are:EAP-TLS, EAP-FAST, PEAP Smart Card, I know that the radius server works because when I switch to a different switch the client works just fine, or if I keep the client on this switch and use any password method (PEAP (MSCHAPv2), MSCHAPv2, EAP-MD5) it also works. In both cases the radius server logged a EAP Timeout. Again this only happens when any EAP method or version of authentication used deals with certificate authentication.Only with the 3 Cisco small business switches we have, have I ran into this problem. The Cisco Aironet and Other Switches (by other manufacturers) work just fine.
View 2 Replies View RelatedI want to connect with AnyConnect Secure Mobility Client 3.0.2052 to ASA 5540 Version 8.4 and SSL Premium License.The clients using Maschine Certificate to authenticate to ASA. This works fine.Now I want to setup a DAP to verifiy the client against the Microsoft AD using LDAP. I configured LDAP server in ASA see:aaa-server LDAP protocol ldap aaa-server LDAP (inside) host ldap.com ldap-base-dn DC=x,DC=x,DC=x,DC=com ldap-scope subtree ldap-login-password ***** ldap-login-dn ***** server-type microsoft ,I can see that it works if I test the server via the testbotton in ASDM and I see it in CLI "debug ldap 255" also. But if I configure in DAP: AAA Attribute ID:memberOf = DomainMember I can not see any request to the LDAP server during I try to connect with the Client und the DAP doesn't match.
View 2 Replies View RelatedCurrently the ACS 5 is authenticate the iPhone/iPad by using the MAC address (which is entered manually) and AD user/password, i need to do that with certificate, so it will be scalable.
View 2 Replies View RelatedI'm trying to set up vpn with ASA 8.2(5) and Anyconnect 3.0.4235. The goal is to force user to connect from registered machines only (winXP & win7 x32 and x64). To do this, I used machine certificates issued by own CA. Certificate is installed in machine store. I use double authentication (aaa & certificates). Everything works fine, AnyConnect browses cert store, ASA validating machine certificate, then user is prompted for username/password and finally if all is correct - connection is established.My problem is, that for new installation (new host), AnyConnect fails at first connection attempt. If I use aaa authentication only, connection is established, but if I use aaa & certificates - connection fails. The appropriate .xml profile is predeployed at client host asa well as machine and root certificates.Important: When first try (aaa auth) succeded, others are always OK (with aaa. certificate or aaa & certificate authentication). Only the first one fails.The goal is to succesfuly establish connection with aaa & cert.
With DART i get:
******************************************
Type : Error
Source : acvpnagent
Description : Function: CTransportWinHttp::WinHttpCallback
File: .CTransportWinHttp.cpp
Line: 2150
[code]....
Certificate is valid for sure, and as I mentioned before, if first use aaa only, the second try is OK. At ASA with debug crypto ca 255 can't see any certificate from client.
When I get the web authentication dialog from 1.1.1.1 it starts of with a certificate error. Is there a way to prevent this certificate error while using the self signed certificate? I have not been successful installing certificates on my WLC - problems with OpenSSL and others. Want to get this deployed but don't want users to have to encouter that error.
View 1 Replies View RelatedAny instructions to configure an ASA to allow authentication by certificate only on an AnyConnect vpn?I'm running an ASA 5505 with 8.4(1) and AnyConnect 2.4.7030 on an Android phone.I currently have the AnyConnect client connecting ok using username / password for authentication.
I have loaded the company root certificate (internally generated) into the ASA "CA Certificates" and generated an Identity Certificate for the ASA.
want to connect with AnyConnect Secure Mobility Client 3.0.2052 to ASA 5540 Version 8.4 and SSL Premium License.The clients using Maschine Certificate to authenticate to ASA. This works fine.
Now I want to setup a DAP to verifiy the client against the Microsoft AD using LDAP. I configured LDAP server in ASA see: [code]I can see that it works if I test the server via the testbotton in ASDM and I see it in CLI "debug ldap 255" also. But if I configure in DAP: AAA Attribute ID:memberOf = Domain Member I can not see any request to the LDAP server during I try to connect with the Client und the DAP doesn't match.
I have an issue when I´m trying to authenticate my iphone&blackberry device with ASA 5520 using certificates. It seems that certificates are working fine, pass the ike phase 1 but never complete the phase 2. When i use pres hared keys everything works fine with both devices.
If you consider necessary, i can provide my current configuration in asa.
I have cisco 2504 WLAN controller with 7.4 IOS. My query is can I configure the MAC authentication with certificate based. And without using any external servers like Radius, ACS and LDAP.
May I know, If there is a option on WLC…
I am planning to migrate from an old 4400 to a new 5508. I am happy with migrating the access points but I need to know if I can migrate the web authentication certificate used for guests.The new WLC will have the same virtual interface and DNS name to match the CN on the current certificate. Will this work or will I need a new certificate?
View 2 Replies View Relatedhow to chance the web authentication certificte on WLAN 2100 controller. My users are complaining that they need to accept the security certificate before proceeding to the actual authentication?
View 4 Replies View RelatedI need some clarification with configuring my ASA 5540 with IOS 8.3x for remote client certificate authentication.
I have my root certificate from the Microsoft CA but not quite sure if the outlined steps in the Cisco websites below are exactly what I need since the firewall seems to be generating the certificate to be used. [URL].
My setup is such that the CA will issue certificates to the remote clients and to the ASA firewall, and the remote clients will authenticate and connect with their certificates which the firewall constantly updates using the CRL update from the CA. The dhcp pool is to be issued by the domain controller on the inside network and not on the firewall. Any examples or best practice steps to achieve this.
It appears we had a vendor setup an SSL certificate for our vpn. I see it under the ASDM on configuration -> device management -> Certificate management -> identity Certificates
there is the certificate there and I also see it pointing to the outside under configuration -> device management -> advanced -> ssl settings and under outside the primary enrolled cert is the ssl cert.
only thing i can see which may be incorrect is if i look at the cert details under indentity certificates and select issued to the url says http not https..
I'm currently dealing with a problem related to the integration between the a Cisco ASA 5510 and an AD Microsoft CA on a windows2008R2. I'm basically trying to enroll the ASA in the CA and get a certificate for the ASA to use for SSL VPNs. I'm using SCEP enrollment and I've set up NDEP on the Win2008 CA.
Everything seems to be working just fine and I get the certificate but If I assign it to the interface, first the client receives a warning and then a blank page is shown (everything works just fine with the ASA self-signed certificate). The problem looks like to be related to the purpose of the keys (key usage field) which is not Server authentication. The certificate is automatically generated using the IP Sec (offline) template.
I have an ASA 5510 Try to add a new certifcate to the exsiting trustpoint or create a new trustpoint and migrate my VPNs over to that.
View 1 Replies View RelatedDo you know the procedure of import SSL certificate from Godaddy to ASA 5510? attached is the drop-down list that I have to choose from.
View 5 Replies View RelatedCan anyconnect clients and cisco vpn ikev1-2 clients use the same certificate on an ASA 5510 ?
View 4 Replies View RelatedWe have purchased "True BusinessID certificate" from Geotrust for our SSL VPN. Geotrust issued 2 certificates such as Web Server CERTIFICATE & INTERMEDIATE CA.
SSL vpn is being configured in Cisco ASA 5510 software version 7.2(3). Now we could successfully install INTERMEDIATE CA successfully to ASA but Web Server CERTIFICATE cannot install and gives the following error
*Failed to parse or verify imported certificate*
We followed this link to install the certificatesURL
We contacted geotrust regarding this errror and they suggest to install GeoTrust Root along with the Primary & Secondary Intermediate CA certificates for True BusinessID certificate. URL
1. How to install Root along with the Primary & Secondary Intermediate CA certificates on our Cisco ASA 5510 version 7.2(3) . is there any proper way to install certificate i mean ROOT--intermediate--identify ?
2. Have we seleted the exact SSL certificate from Geotrust for our SSL VPN? is there any other certificate we should get it from Geotrust?
Tried configuring SSL VPN using Certificate authentication using a Microsoft CA server. Truspoint created and mapped to SSL VPN. While connecting the SSL VPN getting certificate validation failure. find the error screen shot attached
View 4 Replies View RelatedI have an anyconnect account set up using version 3.0.5080 and connecting to an ASA 5510 base 8.2(2)17. We are using certificates for authentication. If I try and use the account on a windows machine it all works fine.
However on a mac running Lion if I try and connect via a web browser or already have the anyconnect client loaded and try to connect I always get “certificate Validation Failure”. I double checked the certificate was correct and am sure that is correct as it is the same certificate on the Windows and the mac. After searching online I have also tried editing the anyconnect profile to so it is set “certificate store override”, and put the certificates and key in the “user/.cisco/certificates” and “/opt/.cisco/certificates” folders.
After further testing, if I change the anyconnect connection profile to “authentication aaa” I can connect fine. Then if I disconnect, change it back to “authentication certificate” I can connect fine the first time, but all the following subsequent efforts I make fail. If I repeat this process this happens each time, I can connect the first time but after that it fails with the same “certificate Validation Failure” error message. When it connects this first time I checked and confirmed that it is definitely using the certificate. I have also tried using both authentication methods (“authentication aaa certificate”) and had the same problem.
This leads me to believe that my configuration is correct and it is some bug in the anyconnect client or the ASA image. I have had a look through bugs and read somewhere that there was a bug on earlier versions of 8.4, but nothing about 8.2.
I'm trying to export identity certificates from an ASA 5510 to 5520, I'm exporting in pkcs12 format and specifying a passphrase. When attempting to import to the 5520, I get "error import pkcs12 operation failed" from cli or asdm.
View 1 Replies View Related