Cisco WAN :: Nexus 7000 MPLS Feature-set / LDP Missing

Jan 8, 2013

I installed mpls feature set in N7K.I was able to enable feature l3vpn.Then, I tried enabling feature ldp. license not installed. ldp feature will be shut down after grace period of approximately 120 day(s).
 
I don't see any TRANSPORT_SERVICES_PKG in the NX-OS licensing guide.However, there is LAN_TRANSPORT_SERTICE_PKG. But I believe this is not for LDP.

View 9 Replies


ADVERTISEMENT

Cisco WAN :: MPLS On Nexus 7000?

Dec 27, 2010

i wanted to know if i can and when i will be able to run the nexus 7000 as a Fully MPLS PE router (L2VPN, L3VPN etc..) ?
 
the interfeces need to be 10Gbps so i need to use the 8 ports & the 32 ports M1 modules.

View 15 Replies View Related

Cisco WAN :: Nexus 7000 Missing Licenses Which Should Come In Bundle

May 8, 2012

We have ordered the following 10 line items , but only got 3 licenses , unless the 3 licenses somehow have all the licenses integrated into the 3 part numbers below, but I suspect not.
  
Licenses attached from Cisco:-
 
N7K-C7009-XL-SBUN   Nexus 7009 Scalable Feature License                         x  1
N7K-C7009-SBUN-P1   Inc LAN,ADV,TRS,EL2,DCNM,DCNMSAN,MPLS,SAN,XL -Promotion     x 1

[Code].....

View 3 Replies View Related

Cisco :: Nexus 7000 Netflow Missing Data

Jun 26, 2012

I've configured N7K to export layer 2 flows. Using 2 different flow collectors (open source and commercial), gaps/drops in the reported traffic are observed on a periodic basis.Problem doesn't seems to be with the exporters, hence I wondering if netflow configuration on N7K can be tweaked to address this symptom. Using the 'show exporter' command, no errors/drops are observed. [code]

View 2 Replies View Related

Cisco Switching/Routing :: Nexus 7000 With Fabric Extenders Nexus 2000?

Mar 15, 2013

I have been tasked to replace the existing Cat 6500 and 3750 switches by Nexus 7000 and Nexus 2000.I was told initially my boss plans to get 2 x Nexus 7000 and then eventually blow up to 4 x Nexus 7000s.For Nexus, is there a list of tasks / points that i need to consider for building the initial design?
 
Can i just link the Nexus 7000 like the following?
 
N7k-A    =========   N7k-B
|                                   |           
lots of N2ks               lots of N2ks

View 12 Replies View Related

Cisco Routers :: RV220W Port VLANS - Missing Feature In Newer Firmware

Nov 11, 2012

From an older manual it describes how to configure this. I installed the oldest firmware available for download and this feature is there. Was this just simply moved somewhere else in the newer firmware?
 
Configuring Port VLANs
You can associate VLANS on the Cisco RV220W to the LAN ports on the device.
By default, all 4 ports belong to VLAN1. You can edit these ports to associate them

[Code].....

View 2 Replies View Related

Linksys Wireless Router :: Befsr81 V.3 - Missing Security Feature To Setup Secure Wifi Password

Mar 11, 2013

i have a Linksys modem BEFSR81 v.3 and am trying to reset my wifi password for secure connection.  When i log into the the admin page, to my surprise, I could not find the security feature to create WPA or WEP password.  i'm stumped.  This has never occurred to me before on this modem.

View 6 Replies View Related

Cisco WAN :: Routing Protocol Over Nexus 7000?

Feb 14, 2012

I just bought 2 Nexus 7000 to upgrade my primary/Production Data Center from 6509/MSFC. I'll keep the 6509E/SUP720 for the DR Data Center. I have ordered two 10Gig Wan Pipes between the Production and DR. In other words between the Nexus 7000 and the 6509E.
 
My problem is that i do not know the best way to do the routing between the 2 Data Centers. Currently I have MPLS with a provider connecting the 2 Data Centers using BGP on the CEs and I'm running eigrp in locally in the Cores. After the 10Gig comes to life, the MPLS will go away.
 
My QUESTION: Should i run ibgp between the 2 Nexus and ibgp between the 2 6509E/sup 720 AND THEN  run ebgp between the Nexus and the 6509/sup 720 over the 10Gig WAN? OR should i collapse everything into one eigrp domain/AS and just run Eigrp between the Nexus and 6509E/Sup 720 over the 10Gig Wan?

View 1 Replies View Related

Cisco :: Kernel Error On Nexus 7000

Oct 23, 2011

I work in an organization where we recently upgraded our core switches to Nexus 7000. Everything is set up well but we still keep getting this annoying message when we log in the switch. Also the time taken to login into the switch (ssh and telnet) is longer than normal. It is not affecting the network in any way but my concern is somewhere something is wrong and it will give us trouble in the future. How to troubleshoot the cause of this error message. [code]

View 3 Replies View Related

Cisco :: PRIMER LMS 4.1 And NEXUS 7000 Compatibility

Apr 6, 2012

is the LMS 4.1 supports Nexus 7000 baundle ?

View 2 Replies View Related

Cisco WAN :: Nexus 7000 (NX-M132XP-12L) And QoS Statistics?

Sep 18, 2012

I have such input data:
 
2xN7K-C7010 - Nexus7000 C7010 (10 Slot) Chassis
2xN7K-M132XP-12 - 32x10Gbps
NX-OS version 6.1(1)
 
I have enable (by default) QoS feature on them:
 
N7k# show policy-map interface brief  
Interface/VLAN [Status]:INP QOS       OUT QOS       INP QUE       OUT QUE
================================================================================
port-channel1   [Active]:                            default-in-po default-out-p
port-channel2   [Active]:                            default-in-po default-out-p
port-channel10  [Active]:                            default-in-po default-out-p
Ethernet1/1     [Active]:                            default-in-po default-out-p

[code]....

View 3 Replies View Related

Cisco Application :: Migration From Nexus 7000 Without VDC To VDC

Jun 11, 2012

I am working on a DataCenter architecture where we would like to implement Nexus 7000, For the time being, there only one "context" but we may take the opportunity to implement VDC in a later future, I was not able to find a clear answer on the following :

Can we add the VDC licence & configure a new VDC on a Nexus 7000 running without VDC ? I suppose this is possible. but does it need to have the whole configuration changed or adding a VDC can be done without any interruption on the current environnement ?

View 2 Replies View Related

Cisco WAN :: Sampled Netflow From Nexus 7000

Apr 15, 2013

We have Nexus 7000s configured for sampled netflow. We have tools that should reconstruct the sampled flow records for management displays. Most tools require the flow record, option and template to be sent in order to reconstruct the sampled flow record. We have captured some of this traffic and noticed that the template contains "SamplerMode": Unknown (1) [See Nexus 1-1.png]. Is this usual or have we not include commands required for proper operation? [code]

View 2 Replies View Related

Cisco WAN :: Nexus 7000 Series NX-OS System

Nov 25, 2012

I am new to Cisco Nexus 7000 Series NX-OS System of appliances.I am looking for type of log events that are getting generated by CISCO Nexus 7000 switches. Need some documents which give me this references & some documents which have a log line explained.

View 2 Replies View Related

Cisco :: Nexus 7000 What Does It Mean CdaAG Is Not Implemented For Device

Mar 5, 2012

I config LMS to manage many network devices with the same credential. However, only the Nexus 7000 fail to be archive configuration. LMS log said during telnet, the authentication fail 3 times. (I didn't use any authen server. The username and password are local. and in DCR page, i only configure " Primary Credential"l, nothing in "Auto Update Credential")Then i do a CAD check and fail also. I open the RME/CAD log, comparing with those successful log, there is one line different:[ Mon Mar 05  16:04:27 SGT 2012 ],WARN ,[main], com.cisco.nm.rmeng.inventory.cda.CdaFacade,getCdaHandlerIf, 163,CdaAG is not implemented for the device145.240.152.1 What does it mean "CdaAG is not implemented for the device?

View 1 Replies View Related

Cisco WAN :: Port-channel Between Nexus 7000 And 55900?

Jan 16, 2011

I have configured my Nexus 7018 and 5548 as  follow (see diag attached).Both 7000 and 5500 are vPC pair(po1and po2). Now I have created port-chanel between 7018and 5548 as port channel PO3 on 5500. Would it give me 20g bandwidth as PO3?or 10g only uplink to 7018? Do I need to config all four 10g links in PO3 on both 5500  and 7000 switches to achieve max b/w and failover?

View 4 Replies View Related

Cisco AAA/Identity/Nac :: Radius Authentication With ISE And Nexus 7000

Mar 24, 2013

i am trying to assign a right role for a user who authenticates to nexus 7k switch via radius. i am using cisco ISE version 1.1.1.268 and the nexus version is    5.0.2,I have created a role on nexus.

View 1 Replies View Related

Cisco :: Nexus 7000 Switch And TCP Window Sizing?

Apr 30, 2012

Where to find the configuration for TCP window sizing or scaling on the nexus 7000. Also, if the Nexus 7000 handles packet traffic through-put from things like CIFS differently or does it just pass the packet straight through.                     

View 1 Replies View Related

Cisco Switching/Routing :: Nexus 7000 Vrf Not Enabled?

Dec 9, 2012

Should I install any special license to enable vrf within Nexus 7000 VDC? I observed that vrf routing instance is not enabled in the VDC.

View 2 Replies View Related

Cisco :: Can Nexus 7000 Provide NTP To Rest Of Network

Aug 4, 2010

Can the Nexus 7000 provide NTP to the rest of my network?  Can it be an NTP server?  I have the followign ntp configuration on it, and have used the commit command, but it seems to be ignoring any NTP requests from other devices. [code]

View 8 Replies View Related

Cisco Switching/Routing :: NTP Authentication On Nexus 7000?

Mar 3, 2013

I am configuring NTP on a new Cisco Nexus 7000 running version 6.1(2). NTP is working properly between the access switches and Nexus, however when configuring Authentication, NTP is not working anymore.
 
confguration:
 
Nexus 7K server
============= 
ntp server x.x.x.x
ntp peer q.q.q.q
ntp server e.e.e.e
ntp server r.r.r.r
ntp source-interface  Vlanx

[code]...
 
why NTP authentication is not working !!!!! on Nexus 7000

View 3 Replies View Related

Cisco Switching/Routing :: FIB Inconsistency On Nexus 7000

Aug 3, 2011

On a 7K (5.0(2)), I have a situation where the FIB and RIB are out of sync.  I'm not sure it's causing a problem, but it's been implicated in some weird packet loss issues.  It seems like it could cause network issues if you had two routes in the RIB, only one in the FIB, and then you lost the single path in the FIB. How the RIB/FIB gets out of sequence, how to proactively know about it (nothing in the logs here), and whether or not this is a big deal or a red herring?
 
Here's sample output that illustrates the RIB and FIB being out of sequence.
 
ROUTER1# show ip route 172.16.100.1
IP Route Table for VRF "default"
'*' denotes best ucast next-hop

[Code].....

View 2 Replies View Related

Cisco WAN :: Nexus 7000 C7010 Reload Suddenly?

Jul 17, 2012

i have problem with device. The device Nexus7000 C7010 with System version: 4.2(1) is suddenly reload .this is cause from sh system reset-reason

CORE1-7010# sh system reset-reason
----- reset reason for Supervisor-module 6 (from Supervisor in slot 6) ---
1) At 493933 usecs after Thu Jul 19 08:47:07 2012
    Reason: Reset triggered due to HA policy of Reset
    Service: netstack hap reset
    Version: 4.2(1)
 
when i see this problem related with this bug

CSCtd14544  g Details [URL]

View 2 Replies View Related

Cisco Switching/Routing :: Support For FeX 2232TM In Nexus 7000?

Feb 2, 2012

We recently purchased a pair of 2232TM Fabric eXtenders just to find out that our Nexus 7000 does not support it. Will there be support for the 2232TM FeX in Nexus 7000 any time soon?

View 4 Replies View Related

Cisco Switching/Routing :: Nexus 7000 OTV With F1 Line Cards?

Jul 17, 2012

I have two data centres connected via a L2 DWDM, my manager wants to look into using OTV to get rid of the layer 2 broadcasting issues.
 
Problem is the DWDM is 1000BaseSX, which is only supported on the N7K-F132XP-15.   (and the N7K-M148GS-11 but that doesn't support FCOE, so many bloody caveats). From what I can gather OTV is not supported on the N7K-F132XP-15.
  
Is it possible to terminate the DWDM on the F1 card & loop another port from the F1 to a port on the N7K-M148GT-11 & run OTV on the M1????
  
Either using VDCs or just an isolated VLAN on the F1. Is there any better way to do this? Hardware has not yet been purchased.

View 0 Replies View Related

Cisco Switching/Routing :: Nexus 7000 Vdc Vlan Configuration?

Dec 9, 2012

I am seeing an issue that after deleting/recreating one of the VDC in Nexus 7K, VLAN is not been able to be configured within the VDC although it is not actually a reserved VLAN. Could it be anything missing in the license installation? the version of the image is NX-OS 6.1.2
  
StorageVDC(config)# vlan 100
^
invalid vlans (reserved values) at '^' marker.

View 2 Replies View Related

Cisco Switching/Routing :: Nexus 7000 Keep Alive Link For Vpc?

May 5, 2013

We setup two n7K as core switches in our network. We configure VPc peer link as well successfully. We are using mgmt interface of supervisors as a peer keep alive interface, so what happen when this keep alive gets down? Are we loss Vpc peer link between both nexus 7 K?

View 4 Replies View Related

Cisco :: DCNM For LAN Enterprise License For One Nexus 7000 Chassis

Feb 10, 2012

if i have just   DCNM-N7K-K9 (DCNM for LAN Enterprise License for one Nexus 7000 Chassis) installed on a server, i can manage all nexus switches like 5k and 2k??

View 1 Replies View Related

Cisco Switching/Routing :: Nexus 7000 QoS Marking For Both DSCP And COS

Jan 29, 2012

I have a pair of Nexus 7K's running 5.1(3). I have a handful of edge devices that I need to mark ingress traffic, and need to mark both DSCP and CoS. Right now, I have a working config that marks DSCP appropriately.While that works dor DSCP, the MQC will not allow me to mark both DSCP and COS in the same class, and unlike IOS, it appears that Nexus does not have a default DSCP-to-COS mapping. My understanding is this can be solved using table maps, but I don't see how that can solve my problem in this specific scenario (it appears I can do marking or table-map mutation, but not both?). How I can accomplish both?

View 5 Replies View Related

Cisco WAN :: Does Nexus 7000 Support Ipv6 6to4 Tunnel

Nov 23, 2011

Does Nexus 7000 support ipv6 6to4 tunnel?

View 3 Replies View Related

Cisco Switching/Routing :: Nexus 7000 Cannot Get AAA Authentication To Work

Dec 5, 2011

I cannot get the AAA tacacs+ authentication to work on my Nexus 7000.

View 4 Replies View Related

Cisco Switching/Routing :: Nexus 7000 To Know Ambient Temperature

Nov 2, 2012

I need to know how is the ambient temperature for the Nexus 7000 switches to plan a new datacenter. In the datasheet I found the following information regarding this topic:"GR-63-CORE Network Equipment Building Standards (NEBS) specification published by Telcordia Technologies in Section 4.1.2". How are the specification for temperature in this standard?

View 1 Replies View Related

Cisco Switching/Routing :: QOS For VOIP Traffic On Nexus 7000

Mar 4, 2012

regarding QOS on Nexus 7000. Our Nexus 7000's form a collapsed distribution/core layer, our access layer switches are are a mixture of Cisco 3750 & Cisco 4507. 3750 switches will connect to Nexus switches via 1Gb uplink, 4507 switches will connect via 10Gb uplinks. Each Nexus will be connected via 20Gb port channel, all servers connect to the Nexus switches via 1Gb links. We're implementing a new telephone system soon which will be using VOIP so I need to configure the switches to perform QOS. The IP phones will mark the RTP traffic with DSCP value EF and call signaling traffic CS3. I'm fine configuring qos on the access layer switches, its just the Nexus switches which I'm not sure about.
 
Do I actually need to configure any QOS parameters on the Nexus switches so they will prioritise the VOIP traffic. If my understanding  the Nexus switches will trust the DSCP values and assign the traffic to the relevent queues?
 
Just for information VOIP is the only traffic I will be marking QOS values

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved