Cisco :: WLC 5508 Active Directory / LDAP Integration For Authentication?
May 18, 2011
I am deploying Redundant WLC 5508 with 4 VLANs and 4 SSIDs Match to it, Everything works Fine, now i need to do the below:
1. I need All Wireless Users need to authenticated with Existing Active Directory/LDAP
2. I will Create Guest Accounts in my AD , and pass to Guests, Then Guest should only Access Internet except Corporate Resources
2. How can i secure my Voice VLAN for Wireless Phones. I want only WIreless Phones to Connect to Voice VLAN.No internet Access on Voice VLan
View 4 Replies
ADVERTISEMENT
May 24, 2011
I have just recently purchased a 5505 Controller and 30 3502i AP's. On my main corporate WLAN, I would like to allow users to be able to authenticate via Active Directory username and password.I am also looking for as little client side set up as possible. From what I have researched, I will need to use some type of EAP method.
I have come across two methods that appear to be the top contenders.
EAP-FAST - The method seems to be a possibility but I see that it uses certificates. If I use this method, does it mean that I would have to import the certificates to each machine manually? Also, can I configure thsi to work with just the 5508 Controller and an AD Database server or do I need an intermediary like IAS or ACS?
PEAP/GTC - This method is also a possibility and I think that it does not require certificates. Does this also require an intermediary like ACS or IAS.
View 3 Replies
View Related
May 10, 2011
I need to configure EAP-FAST without certificate and authenticate to the corporate Microsoft AD database, Do I need a Cisco ACS server in the middle to forward the authentication to the AD? Or I can do the authentication to the AD directly? I am using a WLC5508.
View 6 Replies
View Related
Aug 24, 2011
I'm attempting to integrate an acs 5v into the domain through the gui. The connection will establish, and the status will read 'connected', just as it lists the domain I've submitted. However, I can't seem to find anything listed under the directory groups, and when I run a connection test, I simply get 'Global Catalogue port status error.' Eventually, I'd like to configure this as a radius server.
View 1 Replies
View Related
Apr 10, 2012
I recently bought a Cisco WLC 2500. I want to configure a WLAN with Active directory authentication.How I can do this?
View 4 Replies
View Related
Jun 14, 2012
i need a documentation or a procedure to how make integration LMS 3.2 with microsoft active directory to make usernames of devices appear in end hosts reports.
View 2 Replies
View Related
Apr 24, 2012
A customer uses Active Directory where some group names contain special characters (ç ~ '^). The Cisco ACS 5.2 is presenting the warnings: "Not all Active Directory user groups are retrieved successfully. One or more of thegroup's canonical name was not retrieved "(Category CSC Oacs_ Identity_ Stores_Diagnostics; code 24457).
What are the results of these warnings to the customer's network? Slow? Loss of access?
View 1 Replies
View Related
Oct 21, 2010
configure the Cisco ACS to authenticate the users from MS Active Directory. Cisco Acs = 4.2.1(15)Currently, i have multiple users configured as local databse. but now i want to authenticate with the domain users.
View 11 Replies
View Related
May 16, 2012
i need to know if i can integrate Single Sign On to my Cisco VPN Client v.5 with my Active Directory which run on windows 2008
View 2 Replies
View Related
Dec 17, 2011
While configuring LDAP , I got struck in “Step 3 - Directory Organization”. How to make this work? My aim is to make users authenticated from their windows domain usernames and passwords while they log in to AAA clients.
View 1 Replies
View Related
Feb 16, 2012
I am not sure why but when I try to connect with my IPSEC VPN client, authentications are failing. The ldap test passes on the ASA but when I try to login, the VPN client gives me authentication failure even though debugs show authentication was successful.User 'test1' should be able to authenticate based on group membership.User 'test2' shouldn't be able to.I already removed the attribute-map to see if that was the problem but I am still failing authentication.
View 9 Replies
View Related
Feb 28, 2013
I current have a network setup with five 1240AG access points. One is configured as a WDS. I also have a WLSE appliance. I have IAS configured on a domain controller running Cisco Secure ACS Agent. My setup works and my clients can authenticate with certificates to Active Directory. My problem is that I need to take my WLSE out of the mix - it is old and failing. I cannot afford a replacement. I know that in order to use WDS, I have to have a WLSE.
So my question is this. If I configure my APs so that do not participate in SWAN, and leave them setup to use EAP and point to my Windows IAS for RADIUS, running Cisco Secure Agent, will they be able to authenticate still.
To be honest, I set this up a long time ago and I cannot remember if the WLSE is required for domain authentication. I know if offered Domain Authentication and I have my Windows Server setup in there. So I am not sure if my APs can authenticate directly to the Windows Server without it.
View 4 Replies
View Related
Mar 3, 2012
I'm somewhat new to ACS and am trying to complete a migration from 4 to 5.3.Currently, I've got ACS joined to my (2003) domain, and it shows status connected (although the test connect fails). I have aaa working without issue for TACACS, but all RADIUS authentication is currently failing. Logs show the message below: "24401 could not establish connection with acs active directory agent"I'm not seeing anything telling in the logs on the domain controllers.
View 1 Replies
View Related
Apr 15, 2013
I am deploying ISE with WLC 7.4. I have two SSID(s) running in my network 1. Corporate & 2. Services. I have a domain setup lets say "AD.com" with 4 groups 1. Corporate, 2. Services, 3. Employees, 4. Contractors.Here is an example of the scenario that I want:
AD.com Group : Corporate's User : 1. C_USER1
2. C_USER2
3. C_USER3
4. C_USER4
5. C_USER5
[code]....
Now what I want to do is have 802.1x authentication on my Corporate SSID that will check in AD.com, ONLY AND in ONLY corporate group for authentication. That is only C_USER1 to C_USER5 are allowed to connect to it. Users from any other AD group shouldnt be authenticated on this SSID.The same for the services group & SSID.
View 2 Replies
View Related
Aug 13, 2012
I have two WLC5508 controllers configured with multiple SSIDs and a VLAN associated to each of them. Now I am deploying a pilot for Web-Authentication and everything seems to be fine except for the LDAP authentication part. I have done all the steps for enabling anonymous bind on Active Directory (AD) and the configuration on the controller is properly in place. I know the configuration is working fine because I have isolated the problem to some sort of routing or communication problem:
Controller Interfaces:
Management Interface - Vlan 1, (X.X.148.99)
Student Interface - Vlan 2 (X.X.132.99)
Mobile Devices interface - Vlan 28
Web authentication interface - Vlan 31
AD is on Vlan 2 (Student Interface range)Each interface has its own IP in a different IP range.
If there is an IP address configured on the Vlan2 interface, LDAP wont work. If there isnt an IP address on the Vlan 2 Interface LDAP works!So you may think I just should not configure an IP for that particular Vlan, but if do this, the controller wont allow to associate any WLAN to that particular Vlan interface and unfortunately I am using it.
I think the Controller uses the Management interface to send traffic to the LDAP server and it gets confused of getting a reply from a device which belongs to the Vlan 2 Interface IP range (AD is on Vlan 2).
I know the controller is a Layer 2 device, so I am not sure why it should need an IP address to be configured for each interface, I read it is used just for roaming purposes but it seems to be somehow related to LDAP communication process as well.
The strange thing is that I can access the management interface IP from the Vlan 2 range and there is not problem at all.
PD: Controller 5508, Software version: 7.0.230.0
View 6 Replies
View Related
May 9, 2012
We are using WLC-5508 in our corporate. For authenication we have implemented ACS with LDAP configured as external user database. We can able to get authenicated for Web based authenication. When it is configured for EAP-FAST, authenitication is not happening.
View 3 Replies
View Related
Jul 18, 2012
From what I've read, it doesn't seem possible to use Web Authentication and obtain encryption unless using a Radius server.
I have a client asking for web auth, encryption, and ldap connection to their AD servers.
View 4 Replies
View Related
Jun 22, 2011
provide me Step by Step procedure for integrating LDAP with ACS 5.2 .
View 1 Replies
View Related
Oct 23, 2012
know about Domino LDAP ? I would like to integrate this LDAP with Cisco ISE.I try to bind this LDAP but it does not show me anything in "Naming Context". So I cannot choose group to map into ISE.I test this on WLC. It is success to do but cannot make the same thing with Cisco ISE.Is this LDAP supports with Cisco ISE 1.1.1 ?
View 3 Replies
View Related
Aug 9, 2011
I got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae. [code]
View 9 Replies
View Related
Feb 24, 2013
I have a WLC 4404 with LWAPs, the customer has a microsoft LDAP and all users are joined to the domain and he wants the users to be authenticated against their domain accounts and this should be done automatically so that when users login to windows they are also authenticated and joined the WLAN.so how we can do that with the simplest way, without Radius server using only the LDAP and wwithout envolving any certificates.also i need to know when i add LDAP server to the WLC, how can i know that this LDAP is properly inegrated with the WLC?
View 8 Replies
View Related
May 27, 2013
I am trying to get the LDAP homedirectory attribute mapped to the WEBVPN_MACRO substitution variables.The orginisation has multiple sites and users have their hame drives mapped on different servers. This is 100s of sites.I cannot find any relevant documentation for the WEBVPN_MACRO Substitution apart from it is unfounded!I am running ASA v9.0.2.
View 1 Replies
View Related
Mar 7, 2011
I have installed ACS 5.2 and configured it to join the Company's Domain as an External database with Active directory 2008. I'm facing a problem that the user once authenticated using it's active directory account it's cached in the ACS and take a while for the ACS to clear this username. For example, if user TEST authenticates and then we removed this user from the AD and then tried again; it authenticates although this users is removed from the AD !!! same thing happens when we change the user group on the AD, it takes a while for the ACS to clear the old user attributes and get the new ones from the AD.
it there an aging time for this caching mechanism, or can i clear the dynamic users manually just like in ACS 4.X ?
View 3 Replies
View Related
Apr 7, 2011
Having problems configuring an SR520 to support SSL VPN with Active Directory authentication. I set up the domain and a user in the SR520. and get the login prompt remotely but when attempting to login using the active directory account i get a login error. I can login fine using local authentication.
View 5 Replies
View Related
Mar 23, 2011
I am trying to set up a small domain for my business. I just purchased a Windows 2008 server and would like to use it as my domain controller.Also, I just had a new ATT DSL line put in. It came with a 2Wire modem/4-port router/wireless router device, therefore the modem can handle DHCP. The line has a static IP address as well so that I can eventually use my own exchange server and web server.I have tried 2 different configurations and couldn't get either to work) I tried to put the router into Bridged Mode and use DHCP server on my server using a PPPoe connection to connect to the Internet. I was confused as to what my static IP address and default gateway of my server should be.2) Then I tried to turn DHCP server off on the server and routing back on the modem/router. This didn't work either.What method would you recommend and why? Also I have some additional questions on each method.
Method 1)
* What is the static IP address of the server. Is it in the 192.168.1.x address or the static IP assigned to my account?
* Do I need a second Nic Card And Router to connect to the rest of my network or can I use the router provide
* What would the Static IP addresses of the additional PC be. Do I need more than 1 static IP from AT&T Method 2)
* Will this allow me to use all internal IP addresses on my machines and use port forwarding if I want a specific box to be a web server or exchange server.
View 18 Replies
View Related
Aug 27, 2012
I know that when you create a user account in active directory, the user's computer is also added to active directory. However, in what circumstance would you add a computer to active directory in which there are no user accounts created, or used ?For instance, my Linksys wrt54g router, on the main configuration tab has a space to name the router, which is appropriate called, "Linksys", and it has space to enter it's domain name, which if I named it, I guess it would be. LinksysRouter.**.local.Why add a router to an active directory domain ?Why add any other computer to an active directory domain with no users associated with it ?
View 11 Replies
View Related
Nov 29, 2012
I have 1 server where i enabled dhcp server and active directory on it . I still have to install something like ISA server on it as isa doesnt support 2008 r2. point me out on the networking , like how should i connect the clients to the server. And how the wireless router and switch should be connected to the server?
View 1 Replies
View Related
Jan 26, 2011
I've got a fully working active directory with mandatory profiles. I'm looking into adding MS Office 2007. I have the disk and everything, but I'm wondering how to go about installing it. Must I go around each workstation installing it?
View 1 Replies
View Related
Dec 12, 2011
I've got this problem with our Operations Manager's laptop not letting him log in once he is offsite(at home). We use an Active Directory server here for all out workstations to log on to the domain but once he is offsite he cannot log in because the laptop obviously cannot find the sever to authorize the user. For now I just have him logging in locally to his laptop and not to the domain when he is offsite but this creates a problem; it makes two users/desktops for him, one user.domain and user.local. Is there a way to tell the machine locally that his username is authorized to let him log onto the domain account though it cannot connect to the domain server?
View 3 Replies
View Related
May 21, 2012
I am receiving a RADIUS authentication failure stating user must change password; however, password has been changed in AD and is not requiring change password any longer on the AD side.
Is there a cache on the ACS that needs to be cleared? AD connection from ACS to domain is fine. All other accounts authenticate.
It appears that if a user lets their account expire is when this happens. Account has been reenabled in AD and password has been changed. Still will not authenticate via ACS.
View 1 Replies
View Related
Nov 9, 2011
question 1. in the typical active directory environment and doing wireless/wired 802.1x authentication on endpoints, should ACS join as a domain computer?
question 2. for the endpoint (domain computer) join the domain, in this case is the endpoint will trust the ACS ( also domain computer) ?
question 3. what if there's a GPO policy to install the rootCA certificate toward the endpoints. In this case, ACS should issue the CSR and let the domain CA to signed as the identity certificate? Am i correct?
View 2 Replies
View Related
Oct 13, 2010
I am working with ACS 5.2 and using Radius authentication for vpn client.
The authentication method used is Active Directory in an Windows enviroment with multiple domains in the same forest.
My problem occurs when i change a user from one group to another in Active Directory. After that i receive the following message when try to connect:
15039 Selected Authorization Profile is DenyAccess
The message is because match the default policy. Another user in the same AD group works fine. All domain in the forest have trust relation each other. I am using universal groups to include users from all domain belongs this forest.
View 4 Replies
View Related
Jan 5, 2011
I have installed 4 unit Cisco Aironet 1250 acting as Autonomous AP each. I want to integrate these AP to Windows Active Directory for authentication level.
When I read configuration guide on Cisco Aironet, they must be authenticated via RADIUS server.
Is it possible that these AP directly authenticated to Active Directory via LDAP protocol?
View 4 Replies
View Related
