I am trying to get the LDAP homedirectory attribute mapped to the WEBVPN_MACRO substitution variables.The orginisation has multiple sites and users have their hame drives mapped on different servers. This is 100s of sites.I cannot find any relevant documentation for the WEBVPN_MACRO Substitution apart from it is unfounded!I am running ASA v9.0.2.
View 1 RepliesI am deploying Redundant WLC 5508 with 4 VLANs and 4 SSIDs Match to it, Everything works Fine, now i need to do the below:
1. I need All Wireless Users need to authenticated with Existing Active Directory/LDAP
2. I will Create Guest Accounts in my AD , and pass to Guests, Then Guest should only Access Internet except Corporate Resources
2. How can i secure my Voice VLAN for Wireless Phones. I want only WIreless Phones to Connect to Voice VLAN.No internet Access on Voice VLan
I have a home directory on a linux server and i would like to figure out how can i schedule regular backups/syncs onto an external hard drive on a windows machine.
View 8 Replies View RelatedI would like to setup a regex substitution rule. For example with an HTTP response if the work CAT is present I would like to have the ASA change the string to DOG.
This is not the exact problem I want to solve, but it is concept. I am running ASA 8.4.1.
I´m a IOS CLI fanatic. Its the first tiem that I have to configure a SB switch. Its very confusing, I want setup a voice vlan id as 200. but I don see that this value change when I try to apply the smartport macro to the interface.Its possible change a smartport macro?
View 1 Replies View RelatedI am troubleshooting a s2s vpn between an ISR871 and my ASA5520 and I suspect a problem with my crypto-maps.
Is there a way I can display an access-list on the ASA and have the object names substituted with their IP addresses?
How do I create static smartport macro on Catalyst 2960 & 3750 equivalent to below static smartport macro:
macro name NOT_USED
description UNUSED_PORT
switchport
switchport mode access
switchport access vlan 100
shut
@
I am able to create above smartport macro on Catalyst 3760 & 6500, but not on 2960 & 3750 (see below):switch(config)#macro ? auto Macro autoexecution settings global Enter global macro configuration
i am facing an issue while trying to configure LDAP integration on Cisco ASA firewall. The requirement is allow the remote access VPN to specific group defined on AD. When i checked the debug logs " debug ldap 255" , it shows that the authenication is sucessfull with the LDAP server , but the ldap attribute is not getting mapped and because of this reason , the tunnel-group default group policy of "NOACCESS" is getting applied ( vpn simultanous set to zero) that results zero connection.
I confirmed this by changing the value of NOACCESS from zero to one and found that the VPN is getting connected
The name of user account is testvendor that belongs to the group of Test-vendor.
The configuration and debug output is shown below.
SHOW RUN
ldap attribute-map ABC-VENDOR
map-name memberOf Group-Policy
[Code]....
Is it possible to encrypt password provided for the ldap-login-password attribute in the ASA configuration? Our auditor is not comfortable with the LDAP (AD) password appearing in clear text in the configuration
View 6 Replies View Relatedi am trying to get ad authentication working on a WLC 2504, can I use the LDAP server configuration for authentication?
View 1 Replies View RelatedI have cisco ASA 5505 with security plus, i configured remote VPN with ASA for LDAP authentication which works as i want. Now i have a requierment that some users needs to get access via remote VPN but they are not part OUR SERVER Active directory, Is that a possibility that users have an access of remote VPN while not creating an account in AD and perfrom local authentication via firewall for them?
View 1 Replies View RelatedI have some problems integrating WLC 4400 with AD using ldap. The the WLC LDAP Server and W LAN for Web Authentication are configured according to [URL].
when I connect to SSID the laptop is given the ip address, then I can see the web-page with lo gin and password - it seems to be OK, but when I enter lo gin and pass it tells me, that it's incorrect.
The attributes of the LDAP server:
Server Address *.*.*.*
Port Number 389
User Base DN ou=ORG,dc=domain,dc=local
User Attribute userPrincipalName
User Object Type Person
the test user is located in AD folder ORG, but this folder also contains a lot of sub trees
There are some questions:
1) Is it obligatory to use value "Authenticated" in the Simple Bind option or it can be Anonymous?
2) Is the Controller capable for searching the users located in User Base DN sub trees?
Here is some debug from the controller:
667: LDAP_CLIENT: UID Search (base=.....
669: LDAP_CLIENT: ldap_search_ext_s returns 0 85
669: LDAP_CLIENT: Returned 1 msgs including 0 references
[Code]....
I am planning to implement SSL-VPN (Any Connect) on an ASR 1002 router running IOS-XE Software Version 15.1(3)S2. I need to use LDAP for user authentication, and need to understand what are RADIUS/ TACACS requirements to use LDAP. Do I need to use Cisco ACS or can I use something like Microsoft IAS or Free Radius?
View 6 Replies View RelatedI'm trying to get my LMS 4.2.3 to do LDAP authentication up against our Windows 2008 R2 Domain.url...
As far as I can see It all has to do with LMS not being able to get a functional connection to the AD that allows for LDAP query's: [code] How does this LDAP thingie work? The documentation states that I must supply a specific user to the Usersroot, since I'm on a 2008 domain, but where do I provide the password for this account, so LMS can log in and do its LDAP queries?
Is LDAP web authentication supported on the AIR-WLC2006-K9? There is a place to add LDAP servers in there but I can't seem to get the web authentication piece of it to work. I saw some idications on forum posts online that made me think that it wasn't supported but I never found a definitive cisco answer. I have it set up and working great on a 5508 wireless controller.
View 1 Replies View Relatedprovide me Step by Step procedure for integrating LDAP with ACS 5.2 .
View 1 Replies View RelatedHaving problems configuring an SR520 to support SSL VPN with Active Directory authentication. I set up the domain and a user in the SR520. and get the login prompt remotely but when attempting to login using the active directory account i get a login error. I can login fine using local authentication.
View 5 Replies View RelatedI am having a problem getting an ASA running 8.3 to authenticate an SSL VPN directly against an LDAP on Windows Server 2003. I have changed the read access on the Active Directory to allow Annonymous to read it. I think I am missing something on the ASA config. I have the Server Group specified with the address of the correct server but nothing else really configured.
View 1 Replies View Relatedknow about Domino LDAP ? I would like to integrate this LDAP with Cisco ISE.I try to bind this LDAP but it does not show me anything in "Naming Context". So I cannot choose group to map into ISE.I test this on WLC. It is success to do but cannot make the same thing with Cisco ISE.Is this LDAP supports with Cisco ISE 1.1.1 ?
View 3 Replies View RelatedI have seen that the current WLC software release, 7.0.116.0, does not support secure LDAP using TLS. Are there any plans to incorporate this feature? (I've read that it was supported in previous releases to version 4.2). Is it in the roadmap of the product?
View 1 Replies View RelatedWe are attempting to use LDAP for web authentication on a WLC 4402.
[URL]
You are able to connect to the SSID and it reidrects you to the login page as it should. When you enter your username and password you get a message that "the username and password combination you have entered is invalid." Based on the following log it looks like the LDAP bind is the issue.
*LDAP DB Task 1: Dec 19 11:19:26.584: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
We are able to test the following configuration with ldp.exe successfully,
Server: ***.***.***.***
Port Number: 389
Bind Username: CiscoBYOT
[Code].....
I have 2 SSIDs on WLCs.I would like to have 1 SSID point to the acs radius using LDAP store and the 2nd SSID point to the acs radius using the host identity store for mac filtering.both scenarios are working, but not together.if I adjust the rule order I can get one SSID, but then the other fails. [code] It seems to me that there should be a simple process to make this happens. I thought if the rule is not matched it would move on to the next rule etc.I might be able to live with first checking ldap and if that fails move on to the local host db, but that seems ineficient. url...
View 3 Replies View RelatedDoes loadbalancing ldap services in ACE? Both port 389 and 636.
View 4 Replies View RelatedI'm trying to setup WLC for LDAP to authenticate the users. I have all the components required according to cisco's document. WLC4402, LAP1142N, 2008 AD serving as LDAP.
I'm configuring according to the document and also trying same settings from other users on this forum who (seems to) have got the WLC-LDAP up and working. My problem is that I'm receiving the below debug message on the controller and there is nothing on the internet on this error:
*LDAP DB Task 1: Apr 28 10:05:35.903: LDAP server 1 changed state to IDLE*emWeb: Apr 28 10:09:21.046: aaaLdapServerStateSet [1] changed state to 'DISABLED'.*emWeb: Apr 28 10:09:21.046: aaaLdapServerStateSet [1] changed state to 'ENABLED'.*LDAP DB Task 1: Apr 28 10:09:21.052: ldapTask [1] received msg 'CLOSE' (4) in state 'IDLE' (1)*LDAP DB Task 1: Apr 28 10:09:21.055: ldapClose [1] called lcapi_close (rc = 1008 - Invalid client handle)*LDAP DB Task 1: Apr 28 10:09:21.055: LDAP server 1 changed state to IDLE
I'm getting this error regardless of the authentication type, any username and attributes. So it makes me think WLC is not even trying to bind to LDAP. If the error was invalid credentials or something mismatch or something, it gives me some information to base my troubelshooting but I just can't find information on this (rc = 1008 - Invalid client handle) message.
I need to integrate a 2504 WLC with a windows 2003 LDAP server for extented authentication, is there any guides available for this ?
View 1 Replies View RelatedWLC 4404 LDAP Bind Fails
View 12 Replies View RelatedI have an CS-ACS appliance with 5.2.0.0.26.3 version. There is not any direct solution for connect ldap client to server. I have 3 servers that have only ldap and for authentication I can not use radius or Tacacs+. I need a solution for this problem. How can LDAP Client connect to ACS when it has only ldap protocol?
View 1 Replies View RelatedPreviously, I was able to configure our Easy VPN Server with local authentication.But now, I am trying to use LDAP authentication to match with our policies.
My router is a Cisco1941/K9.
Current configuration : 5128 bytes!! Last configuration change at 13:25:16 UTC Tue Aug 28 2012 by admin! NVRAM config last updated at 05:03:14 UTC Mon Aug 27 2012 by admin! NVRAM config last updated at 05:03:14 UTC Mon Aug 27 2012 by adminversion 15.2service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!boot-start-markerboot-end-marker!!!aaa new-model!!aaa group server ldap ASIA-LDAPserver server1.domain.net!aaa authentication login ciscocp_vpn_xauth_ml_1 localaaa authentication login ASIA-LDAP-AUTHE group ldap group ASIA-LDAPaaa authorization network VPN_Cisco localaaa authorization network ASIA-LDAP-AUTHO group ldap group ASIA-LDAP!!!!!aaa session-id common!!no ipv6 cef!!!!!ip domain name domain.netip cef!multilink bundle-name authenticated!crypto pki token default removal timeout 0!crypto pki trustpoint
[code]....
I have two WLC5508 controllers configured with multiple SSIDs and a VLAN associated to each of them. Now I am deploying a pilot for Web-Authentication and everything seems to be fine except for the LDAP authentication part. I have done all the steps for enabling anonymous bind on Active Directory (AD) and the configuration on the controller is properly in place. I know the configuration is working fine because I have isolated the problem to some sort of routing or communication problem:
Controller Interfaces:
Management Interface - Vlan 1, (X.X.148.99)
Student Interface - Vlan 2 (X.X.132.99)
Mobile Devices interface - Vlan 28
Web authentication interface - Vlan 31
AD is on Vlan 2 (Student Interface range)Each interface has its own IP in a different IP range.
If there is an IP address configured on the Vlan2 interface, LDAP wont work. If there isnt an IP address on the Vlan 2 Interface LDAP works!So you may think I just should not configure an IP for that particular Vlan, but if do this, the controller wont allow to associate any WLAN to that particular Vlan interface and unfortunately I am using it.
I think the Controller uses the Management interface to send traffic to the LDAP server and it gets confused of getting a reply from a device which belongs to the Vlan 2 Interface IP range (AD is on Vlan 2).
I know the controller is a Layer 2 device, so I am not sure why it should need an IP address to be configured for each interface, I read it is used just for roaming purposes but it seems to be somehow related to LDAP communication process as well.
The strange thing is that I can access the management interface IP from the Vlan 2 range and there is not problem at all.
PD: Controller 5508, Software version: 7.0.230.0
I have working config for 2003 server:
aaa-server DC1 protocol ldap
aaa-server DC1 (inside) host 172.25.29.9
ldap-base-dn DC=KIEV,DC=CC
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn CN=ASA_LDAP,OU=aides,OU=IT,DC=KIEV,DC=CC
server-type auto-detect
ldap-attribute-map LDAPVPNMAP
But when i created another aaa-server DC2 with the same config (different ip and name only), which is running under 2008 Server, i've got at debug:
I'm running VPN SSL on an asa 5520 (V8.2.5) with LDAP authentication and everything works fine but now the AD people changed name in the groups and they added a " " "blank" in one of the fields so when I configured the group I get an error.
for example:
map-value memberOf CN=VPN_SSL_ABC,OU=External,OU=XXX,DC=ext,DC=local ABCPolicy
but this does not:
map-value memberOf CN=VPN_SSL_ABC,OU=External Group,OU=XXX,DC=ext,DC=local ABCPolicy
Is there any way to insert a space in the OU field?
I have installed ACS 5.2 and configured it to join the Company's Domain as an External database with Active directory 2008. I'm facing a problem that the user once authenticated using it's active directory account it's cached in the ACS and take a while for the ACS to clear this username. For example, if user TEST authenticates and then we removed this user from the AD and then tried again; it authenticates although this users is removed from the AD !!! same thing happens when we change the user group on the AD, it takes a while for the ACS to clear the old user attributes and get the new ones from the AD.
it there an aging time for this caching mechanism, or can i clear the dynamic users manually just like in ACS 4.X ?
I have cisco's CUCM version System version: 7.1.5.10000-12 when I do a corporate lookup (form my 7970 I hit Directories - 5) Corporate Directory) I see all sort of accounts that have no phone extensions I.E. our windows service accounts, our administrator accounts that have no number associated with them. is there a way for me to hide them?
View 1 Replies View Related