Cisco VPN :: Spaces In LDAP OU Field ASA 5520
Jun 21, 2012
I'm running VPN SSL on an asa 5520 (V8.2.5) with LDAP authentication and everything works fine but now the AD people changed name in the groups and they added a " " "blank" in one of the fields so when I configured the group I get an error.
for example:
map-value memberOf CN=VPN_SSL_ABC,OU=External,OU=XXX,DC=ext,DC=local ABCPolicy
but this does not:
map-value memberOf CN=VPN_SSL_ABC,OU=External Group,OU=XXX,DC=ext,DC=local ABCPolicy
Is there any way to insert a space in the OU field?
View 2 Replies
ADVERTISEMENT
Mar 13, 2011
I am configuring an ASA 5520 for VPN access. Authorization & Authentication use an LDAP server. I have the tunneling configured successfully, and I can access internal resources. What I want to do now is to restrict access to a specific AD Group membership. In the absence of that group membership, a user should not be allowed access to the VPN.
My test VPN client software is Cisco Systems VPN Client Version 5.0.05.0290. The group authentication is configured into a Connection Entry that identifies the Tunnel Group. I think I worded that correctly.
The Software Version on the ASA is 8.3(1).
My current challenge is getting the VPN to stop letting every access request through regardless of group membership.
[URL]
The configuration (AAA LDAP, group policy, and tunnel group) is below.
aaa-server LDAP protocol ldapaaa-server LDAP (inside) host x.x.y.12 server-port 636 ldap-base-dn dc=domain,dc=com ldap-scope subtree ldap-naming-attribute sAMAccountName ldap-login-password ******** ldap-login-dn
[Code].....
View 2 Replies
View Related
Oct 27, 2012
I am trying to implement Microsoft LDAP server with our ASA 5520. The client is using Cisco VPN client and when I am trying to connect I am receiving the following error message:
"Secure VPN connection terminated locally by the client. Reason 413:User authentication failed"
I triggered the debug on the ASA 5520 and everything looks fine .The LDAP server is sending the right information without any error message.
Googled this error message and I found that I need to enable the simultaneous logins to enable. I enabled it but I got the same error message. This configuration is under remote access vpn>group-policies>General>more options.
View 64 Replies
View Related
Sep 1, 2011
I have 2 ASA 5520 (v. 8.21) in a active/standby fail over configuration.
VPN users are autenticated against the MS-AD through LDAP. For the most part this works well. Occasionally I'm having problems with new users in the AD. If I run a test I keep getting "User was not found". This can happen days after the account was created still. In some cases it never seems to work. The accounts I create exists on the same OU level as all the other accounts that are working.
View 2 Replies
View Related
Oct 16, 2012
I've gotten to the point where I can test against active directory and get in, also I can get AD groups from my server on the ASA. My problem, I can't connect in via my AnyConnect client on my Android. I immediately get a "log in failed" and I know I'm using the right username/pass. Doing a little troubleshooting, I have attached my AnyConnect debug log and the results of the "debug ldap 255" command on the ASA. Also, I've used ldp.exe to determine I can connect in with the username/password combo I'm using.Combing through the AnyConnect logs I see a few instances of "global error unexpected" but no Google searches have brought up anything useful.
View 7 Replies
View Related
Jul 6, 2012
I've discovered that the DDNS update client in the RV042G does not support passwords that contains spaces. This is the first router I've run into that didn't like it.
View 1 Replies
View Related
Aug 7, 2012
users whose status is manually disabled don not have difficulty in authenticating and access managing nework devices. that makes me wonder what is the difference between status enabled and disabled?
View 44 Replies
View Related
May 1, 2013
I know that very few people have their wireless controllers on version 7.4.100. But has any one noticed that the NAT IP address field in the management interface configuration menu is missing?, although it is mentioned as being present in the WLC 7.4 configuration guide. This would definitely affect Office-Extend.
View 4 Replies
View Related
Jun 13, 2011
The URL field in the web access log has a length of 70 characters. Is there any way to increase is[INFO] Mon Jun 13 21:30:30 2011 Website1234567890012345678900123456789001234567890012345678900123456789001234567890 accessed from 192.168.xx.xx
View 2 Replies
View Related
Jul 9, 2012
I have upgraded my new WLC to version 7.0.98.218. I noticed the N/A for the Field recovery version. On my old 4402 it is called the Emergency Image Version, and it is 5.2.157.0
How do i get a recovery version on the WLC?
View 2 Replies
View Related
May 9, 2013
We currently have a distributed PR and DR ACS 5.3 setup, set up with tacacs devices and one radius device.The radius device is used Opnet's AppResponse Xpert Admin. We are trying to intergrate AppResponse Xpert Admin with ACS.
The GUI for AppResponse Xpert Admin is asking for the radius server ip address - i.e our ACS , radius port - i.e 1812 and "secret" - I'm guessing this means the shared secret of the actual ACS itself (not the shared secret used by network devices) .
On our ACS 4.2 systems we have a field for a shared secret regarding the ACS server itself (to authorise replication?).
Using the search function for "Shared Secret" in pdf "User Guide for Cisco Secure Access Conrol System 5.3" has only found references to setting one for network devices and not a field for the ACS itself.Is a ACS server shared secret still relevant for the ACS 5.x system?
View 2 Replies
View Related
Sep 29, 2011
I have added all of the devices to DCR and they show up with their hostname value in all of the device trees except for the fault manager views. In all of the fault manager views the hostname is not being used for the Devie Name field, rather the IP address is being used.
View 6 Replies
View Related
Oct 7, 2012
i need to add a lot of mac addresses in mac addr filter table. many routers do not allow me to add a note for each mac address. that makes management a bit difficult.
eg.
field 1, field 2, enable
xx:xx:xx:xx:xx:xx , peter pc, y
xx:xx:xx:xx:xx:xx, mary pc, n
View 2 Replies
View Related
Apr 28, 2011
Geting this message, having low performance and overrun errors Apr 29 13:45:59 pix-servidores %PIX-4-500004: Invalid transport field for protocol=TCP, from 188.120.243.238/80 to 174.56.110.0/0
View 3 Replies
View Related
Dec 4, 2012
I would like to know if there is a way I can use an XML file to pre-fill the connect field of the Anyconnect client version 3.0. In the past, I have been able to use an XML file to pre-fill information in the NAC agent so I could push it out to clients who didn't have administrator rights to their box. I was wondering if there is a similar method to do this with the Anyconnect client.
View 1 Replies
View Related
Apr 4, 2013
Environment :AP 2602, WLC 5508 V7.4, ISE 1.1.2, Prime Infras 1.2
For a specific SSID, we use MAC address as 1 of the conditions to authorize access only for the company-owned mobiles (smartphones and tablets), the other condition being, for the mobile, to present a valid AD user/password;this way, the so-called BYODs are rejected since this is the rule within this company ;The difficulty with this approach is the fact that there is no way in ISE Identities Endpoints nor Groups to associate a user-friendly name to the MAC address of the mobiles, which makes very tedious some actions such as a search in the ISE authentication Log based on the MAC address value itself;the question is just to know if it is planned to add a new field in Identities Endpoints definition that would allow to associate a user-friendly name to a MAC address, for future ISE versions,
View 1 Replies
View Related
Jan 10, 2013
Is the 5512 able to be field upgraded to a 5515 and so on through 5555? I.E. Can I add ram and other hardware to make the boxes more powerful as my requirements increase? I was hoping this would have been a new feature with the ngen firewalls.
View 3 Replies
View Related
Nov 26, 2012
Does anyone know of some off the shelf (commercially available) software that will set the DSCP field to something other than 0? Im looking to do some network testing using any off the shelf software, voip, games, whatever. I have already setup a traffic generator but my testing needs to encounter a more real life scenario. I have already tried many games, skype, gchat, etc. but nothing sets the DSCP field to anything other than 0.
View 4 Replies
View Related
Jun 26, 2012
I did not know the username and password for my DI-524 so I wanted to do a reset...used a paper clip and held the reset button for ten seconds, unplugged it, powered it up, and as per online instructions tried to type in 192.168.0.1 to access the username and password field so that I could enter "admin" and blank password. Here's where my lack of knowledge comes in. I am working off a MacBook with no Ethernet connection, just wifi. Is what I am trying to do even possible? Or does the computer I configure the router with have to be hardwired to the Internet while I do it?
View 1 Replies
View Related
Apr 7, 2013
between fields in import template file (add or update) for internal users is no column for expiration date ([URL]). This field is not defined also for export file.
My question is: (How) is it possible import new users (or update existing) into internal db with expiration date field?
View 3 Replies
View Related
Jan 25, 2011
I use SNMP and I dont have access to a router to test.Can the SNMP Trap to: Field in the SMNP section be configured for multiple IP addresses.?
View 1 Replies
View Related
Nov 28, 2011
I am begining to work to apply Qos on switchs (C2960 & C6500), and I still have a doubt about the necessity to consider the cos value. I indeed want to apply Qos for ToIP, Video, perhaps create a scavenger class, ans in all cases, I classify my packets with TCP/UDPB port and mark them with DSCP. So is it really necessary to study all the DSCP/CoS mapping problematics ? Is it not possible to make the configurations only on the base of the DSCP field?
View 3 Replies
View Related
Feb 18, 2013
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1
ISP : Kabel Deutschland
the firmware offers 3 different dyndns services. But opendns is not included, also there is no free field to choose protocol, server, password and network. Will this be updated in further firmwares?
View 3 Replies
View Related
Oct 29, 2011
i am facing an issue while trying to configure LDAP integration on Cisco ASA firewall. The requirement is allow the remote access VPN to specific group defined on AD. When i checked the debug logs " debug ldap 255" , it shows that the authenication is sucessfull with the LDAP server , but the ldap attribute is not getting mapped and because of this reason , the tunnel-group default group policy of "NOACCESS" is getting applied ( vpn simultanous set to zero) that results zero connection.
I confirmed this by changing the value of NOACCESS from zero to one and found that the VPN is getting connected
The name of user account is testvendor that belongs to the group of Test-vendor.
The configuration and debug output is shown below.
SHOW RUN
ldap attribute-map ABC-VENDOR
map-name memberOf Group-Policy
[Code]....
View 5 Replies
View Related
Nov 2, 2011
Is it possible to encrypt password provided for the ldap-login-password attribute in the ASA configuration? Our auditor is not comfortable with the LDAP (AD) password appearing in clear text in the configuration
View 6 Replies
View Related
Mar 29, 2012
i am trying to get ad authentication working on a WLC 2504, can I use the LDAP server configuration for authentication?
View 1 Replies
View Related
Oct 16, 2011
I have cisco ASA 5505 with security plus, i configured remote VPN with ASA for LDAP authentication which works as i want. Now i have a requierment that some users needs to get access via remote VPN but they are not part OUR SERVER Active directory, Is that a possibility that users have an access of remote VPN while not creating an account in AD and perfrom local authentication via firewall for them?
View 1 Replies
View Related
Mar 14, 2011
I have some problems integrating WLC 4400 with AD using ldap. The the WLC LDAP Server and W LAN for Web Authentication are configured according to [URL].
when I connect to SSID the laptop is given the ip address, then I can see the web-page with lo gin and password - it seems to be OK, but when I enter lo gin and pass it tells me, that it's incorrect.
The attributes of the LDAP server:
Server Address *.*.*.*
Port Number 389
User Base DN ou=ORG,dc=domain,dc=local
User Attribute userPrincipalName
User Object Type Person
the test user is located in AD folder ORG, but this folder also contains a lot of sub trees
There are some questions:
1) Is it obligatory to use value "Authenticated" in the Simple Bind option or it can be Anonymous?
2) Is the Controller capable for searching the users located in User Base DN sub trees?
Here is some debug from the controller:
667: LDAP_CLIENT: UID Search (base=.....
669: LDAP_CLIENT: ldap_search_ext_s returns 0 85
669: LDAP_CLIENT: Returned 1 msgs including 0 references
[Code]....
View 6 Replies
View Related
Oct 4, 2012
I am planning to implement SSL-VPN (Any Connect) on an ASR 1002 router running IOS-XE Software Version 15.1(3)S2. I need to use LDAP for user authentication, and need to understand what are RADIUS/ TACACS requirements to use LDAP. Do I need to use Cisco ACS or can I use something like Microsoft IAS or Free Radius?
View 6 Replies
View Related
May 5, 2013
I'm trying to get my LMS 4.2.3 to do LDAP authentication up against our Windows 2008 R2 Domain.url...
As far as I can see It all has to do with LMS not being able to get a functional connection to the AD that allows for LDAP query's: [code] How does this LDAP thingie work? The documentation states that I must supply a specific user to the Usersroot, since I'm on a 2008 domain, but where do I provide the password for this account, so LMS can log in and do its LDAP queries?
View 0 Replies
View Related
May 8, 2011
Is LDAP web authentication supported on the AIR-WLC2006-K9? There is a place to add LDAP servers in there but I can't seem to get the web authentication piece of it to work. I saw some idications on forum posts online that made me think that it wasn't supported but I never found a definitive cisco answer. I have it set up and working great on a 5508 wireless controller.
View 1 Replies
View Related
Jun 22, 2011
provide me Step by Step procedure for integrating LDAP with ACS 5.2 .
View 1 Replies
View Related
May 16, 2011
I am having a problem getting an ASA running 8.3 to authenticate an SSL VPN directly against an LDAP on Windows Server 2003. I have changed the read access on the Active Directory to allow Annonymous to read it. I think I am missing something on the ASA config. I have the Server Group specified with the address of the correct server but nothing else really configured.
View 1 Replies
View Related
