D-Link DIR-655 :: URL Field Length In Logs?
Jun 13, 2011
The URL field in the web access log has a length of 70 characters. Is there any way to increase is[INFO] Mon Jun 13 21:30:30 2011 Website1234567890012345678900123456789001234567890012345678900123456789001234567890 accessed from 192.168.xx.xx
View 2 Replies
ADVERTISEMENT
Feb 18, 2013
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1
ISP : Kabel Deutschland
the firmware offers 3 different dyndns services. But opendns is not included, also there is no free field to choose protocol, server, password and network. Will this be updated in further firmwares?
View 3 Replies
View Related
Aug 5, 2011
I have something I assumed but I am not sure if this wrong or not. I assume that every say 1 meter, I can send say 1 bits, so if I have 10 meters of link length, I can send 10 bits of data on that link. Do you have any argument to strongly support this assumption, preferrably a reference.
View 13 Replies
View Related
Jan 1, 2013
My iphone started resetting the connection every 2 minutes today. I noticed that the date maximum is Dec 31, 2012. My logs are getting messed up, and NTP isn't setting. Is there a firmware update for REV E3?? I'm at 5.10 right now.
View 11 Replies
View Related
Feb 8, 2011
Any way to get the DIR-655 to e-mail logs? I have all the e-mail settings set properly, but when I request the logs to be e-mailed, I never get anything. Its not in a spam folder either.I do have the DIR-655 behind a 2wire router/DSL modem. I don't know if this is the problem, but I can send and receive e-mails from my computer which is connected to the DIR-655, so I don't think that is the problem.
View 6 Replies
View Related
Feb 21, 2012
DIR-615, HW rev. H1, FW v8.02
As the subject says... Sending logs using "On schedule" option doesn't work. I have my own personal email server I used to test this. When the router time reaches the defined "Start time" nothing happens. I tried both time formats (12h, 24h). The router does NOT initialize the process of sending the email. I see that in my server mail logs. If sent manually from Status -> Logs -> Email now, it works. If sent using "On Log Full" option, also works.
View 6 Replies
View Related
Oct 8, 2011
My old trusty Linksys router started causing BSODs on my computer (!) by crashing the IP stack, so I bought the DIR-655. No more BSODs, throughput to the web went way up, so all that was a success.Then I tried to set it up to send syslog data to my computer, and it was totally useless. Want to see traffic logs, not debug messages. After a lot of discussion with level-3 tech support, it seems that this router cannot send syslog data to a syslog server that shows the incoming and outgoing traffic IPs for monitoring a network.
View 4 Replies
View Related
Mar 2, 2011
In status->logs sometimes the url is too long and is therefore cut with a set max limit number of characters. Is there any way to increase this character limit. I've been finding it very troubling because I am looking to log the entire url rather than just a cut up version.
View 1 Replies
View Related
Aug 27, 2012
I found this firmware 2.05WW for DIR 655 rev B1, I couldn't find any change logs or anything on the net about it.
View 3 Replies
View Related
Apr 9, 2012
I have a D-Link model DIR-625, and it always seems to disconnect when my mother logs on her computer. Is there some kind of setting on her computer that could be disconnecting us? When my dad is on his I never disconnect which is why I am wondering it must be something on her computer that's interfering with the signal or something. If I reset the router while she's still on, It will disconnect again within a few minutes. So where can I check if it could be her computer that's interfering with the signal?
View 1 Replies
View Related
Feb 16, 2013
Region : Poland
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Orange/TPSA
My router TD-W8951ND remembers only a dozen of latest logs. Previous, older logs disappears. Why? Is there any way to force router to keep logs from, for example, the last 12 or 24 hours?It is important to me because i have some problems on my adsl line and i want to know what happens with connection while I am not in home or when I sleep.If it will be necessary I am able to log onto my router using Telnet, just give me required commands to fix this problem with logs.
View 3 Replies
View Related
Feb 16, 2013
Region : Poland
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Orange/TPSA
On my router TD-W8951ND constantly there are the same type errors, while using computer conected to the router:
Code:
2/16/2013 17:24:8> netMakeChannDial: err=-3000 rn_p=80544b08
2/16/2013 17:24:13> Last errorlog repeat 2 Times
[Code].....
View 1 Replies
View Related
May 6, 2013
Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Linpop
I have had my WR841N for about a year, supplied to me by my WISP. I like the router in terms of facilities but it seems to have one really annoying problem.
The router becomes inaccessible via the webpage after a random period of several days. I have at times associated the issue with occasional loss of radio broadband service but it is not always so. To try and further localise the problem I set the router up to send emails of the log to me every two hours from 17/04/2013 but today for the second time the emails stopped arriving after the 02:29 message and the router is inaccessible again. The router previously locked up with loss of broadband service on 26/04/2013 sometime after emailing a log at 02:41 on that day but had been running without issue from a cold restart at 12:25 as soon as I noticed loss of service.
Today I have not lost broadband service and so even though I am no longer receiving an emailed log or able to access the router via its webpage I am leaving well alone for the present. Some months ago when I originally noticed the web access issue I downloaded and installed the latest firmware TL-WR841N-v7-120201 and I note that there have been no further firmware releases for the v7 model.
My broadband service is delivered via radio link from a local transmitter mast and is reliable with typical download speed of 20-30Mbps and 30-40Mbps upload, seldom if ever affected by weather so I now feel the problem is inherent in the router rather then being the result of some issue affecting broadband service which has been solid since 26/04/2013
Without the log I have no way of knowing what was happening when the router became inaccessible but I attach the last 24 hours of received log below.
May 5 00:59:42 DHCP NOTICE DHCPC Send REQUEST to server d91650b2 with request ip c3cecc76
May 5 02:29:44 OTHER INFO Mail successfully.
[Code]......
View 2 Replies
View Related
Aug 7, 2012
users whose status is manually disabled don not have difficulty in authenticating and access managing nework devices. that makes me wonder what is the difference between status enabled and disabled?
View 44 Replies
View Related
Oct 7, 2012
i need to add a lot of mac addresses in mac addr filter table. many routers do not allow me to add a note for each mac address. that makes management a bit difficult.
eg.
field 1, field 2, enable
xx:xx:xx:xx:xx:xx , peter pc, y
xx:xx:xx:xx:xx:xx, mary pc, n
View 2 Replies
View Related
May 1, 2013
I know that very few people have their wireless controllers on version 7.4.100. But has any one noticed that the NAT IP address field in the management interface configuration menu is missing?, although it is mentioned as being present in the WLC 7.4 configuration guide. This would definitely affect Office-Extend.
View 4 Replies
View Related
Jun 21, 2012
I'm running VPN SSL on an asa 5520 (V8.2.5) with LDAP authentication and everything works fine but now the AD people changed name in the groups and they added a " " "blank" in one of the fields so when I configured the group I get an error.
for example:
map-value memberOf CN=VPN_SSL_ABC,OU=External,OU=XXX,DC=ext,DC=local ABCPolicy
but this does not:
map-value memberOf CN=VPN_SSL_ABC,OU=External Group,OU=XXX,DC=ext,DC=local ABCPolicy
Is there any way to insert a space in the OU field?
View 2 Replies
View Related
Nov 26, 2012
Does anyone know of some off the shelf (commercially available) software that will set the DSCP field to something other than 0? Im looking to do some network testing using any off the shelf software, voip, games, whatever. I have already setup a traffic generator but my testing needs to encounter a more real life scenario. I have already tried many games, skype, gchat, etc. but nothing sets the DSCP field to anything other than 0.
View 4 Replies
View Related
Jun 26, 2012
I did not know the username and password for my DI-524 so I wanted to do a reset...used a paper clip and held the reset button for ten seconds, unplugged it, powered it up, and as per online instructions tried to type in 192.168.0.1 to access the username and password field so that I could enter "admin" and blank password. Here's where my lack of knowledge comes in. I am working off a MacBook with no Ethernet connection, just wifi. Is what I am trying to do even possible? Or does the computer I configure the router with have to be hardwired to the Internet while I do it?
View 1 Replies
View Related
Apr 7, 2013
between fields in import template file (add or update) for internal users is no column for expiration date ([URL]). This field is not defined also for export file.
My question is: (How) is it possible import new users (or update existing) into internal db with expiration date field?
View 3 Replies
View Related
Jul 9, 2012
I have upgraded my new WLC to version 7.0.98.218. I noticed the N/A for the Field recovery version. On my old 4402 it is called the Emergency Image Version, and it is 5.2.157.0
How do i get a recovery version on the WLC?
View 2 Replies
View Related
May 9, 2013
We currently have a distributed PR and DR ACS 5.3 setup, set up with tacacs devices and one radius device.The radius device is used Opnet's AppResponse Xpert Admin. We are trying to intergrate AppResponse Xpert Admin with ACS.
The GUI for AppResponse Xpert Admin is asking for the radius server ip address - i.e our ACS , radius port - i.e 1812 and "secret" - I'm guessing this means the shared secret of the actual ACS itself (not the shared secret used by network devices) .
On our ACS 4.2 systems we have a field for a shared secret regarding the ACS server itself (to authorise replication?).
Using the search function for "Shared Secret" in pdf "User Guide for Cisco Secure Access Conrol System 5.3" has only found references to setting one for network devices and not a field for the ACS itself.Is a ACS server shared secret still relevant for the ACS 5.x system?
View 2 Replies
View Related
Sep 29, 2011
I have added all of the devices to DCR and they show up with their hostname value in all of the device trees except for the fault manager views. In all of the fault manager views the hostname is not being used for the Devie Name field, rather the IP address is being used.
View 6 Replies
View Related
Jan 25, 2011
I use SNMP and I dont have access to a router to test.Can the SNMP Trap to: Field in the SMNP section be configured for multiple IP addresses.?
View 1 Replies
View Related
Apr 28, 2011
Geting this message, having low performance and overrun errors Apr 29 13:45:59 pix-servidores %PIX-4-500004: Invalid transport field for protocol=TCP, from 188.120.243.238/80 to 174.56.110.0/0
View 3 Replies
View Related
Dec 4, 2012
I would like to know if there is a way I can use an XML file to pre-fill the connect field of the Anyconnect client version 3.0. In the past, I have been able to use an XML file to pre-fill information in the NAC agent so I could push it out to clients who didn't have administrator rights to their box. I was wondering if there is a similar method to do this with the Anyconnect client.
View 1 Replies
View Related
Apr 4, 2013
Environment :AP 2602, WLC 5508 V7.4, ISE 1.1.2, Prime Infras 1.2
For a specific SSID, we use MAC address as 1 of the conditions to authorize access only for the company-owned mobiles (smartphones and tablets), the other condition being, for the mobile, to present a valid AD user/password;this way, the so-called BYODs are rejected since this is the rule within this company ;The difficulty with this approach is the fact that there is no way in ISE Identities Endpoints nor Groups to associate a user-friendly name to the MAC address of the mobiles, which makes very tedious some actions such as a search in the ISE authentication Log based on the MAC address value itself;the question is just to know if it is planned to add a new field in Identities Endpoints definition that would allow to associate a user-friendly name to a MAC address, for future ISE versions,
View 1 Replies
View Related
Jan 10, 2013
Is the 5512 able to be field upgraded to a 5515 and so on through 5555? I.E. Can I add ram and other hardware to make the boxes more powerful as my requirements increase? I was hoping this would have been a new feature with the ngen firewalls.
View 3 Replies
View Related
Nov 28, 2011
I am begining to work to apply Qos on switchs (C2960 & C6500), and I still have a doubt about the necessity to consider the cos value. I indeed want to apply Qos for ToIP, Video, perhaps create a scavenger class, ans in all cases, I classify my packets with TCP/UDPB port and mark them with DSCP. So is it really necessary to study all the DSCP/CoS mapping problematics ? Is it not possible to make the configurations only on the base of the DSCP field?
View 3 Replies
View Related
Apr 17, 2012
I was calculating packet amount of MPEG I use byte rate to divide by 188 byte but now i want to calculate H.264 encode video what is the packet length of h.264? is it same 188byte?
View 1 Replies
View Related
Jan 19, 2012
I've heard that a method to optimize traffic is to use variable length packets. They say that the worst case is in minimum length packet (64 bytes). But I can't understand why.
View 2 Replies
View Related
Apr 5, 2011
I used 2 PC with gigabit NIC, use cat6 with short cable i've got speed 1000Mbps, but with longer cable(around 30meters) speed is 100Mbps. I'm looking forward to seeing from you soon.
View 1 Replies
View Related
Sep 14, 2011
Maximum length of cat 6 lan cable between two switch
View 2 Replies
View Related