My iphone started resetting the connection every 2 minutes today. I noticed that the date maximum is Dec 31, 2012. My logs are getting messed up, and NTP isn't setting. Is there a firmware update for REV E3?? I'm at 5.10 right now.
View 11 RepliesI've spent the last 3 days trying to add my new Win7 laptop to our network. Not only hasn't that worked, but now even the XP computers aren't talking to each other ("ns etwork is inaccessible. You may not have permission ...")Here's what's on the network when it was working:
Desktop: Dell, WinXP Pro SP3, wired to network Laptop 1: Lenovo T43p, WinXP Pro SP3, both wired & wireless options (usually use wireless) Laptop 2: Dell, WinXP Pro SP3, ditto above
**All machines are running Norton 360, but even when I turn off the firewall, they're not accessible.
Internet: DSL modem Router: Cisco E3000 Printers: HP LaserJet 4 on desktop LPT1
HP Color LaserJet 2840 All-in-one on network
Then I want to add my new Lenovo T420 laptop (Win7 Pro SP1 x64) (I do have all machines in the same workgroup.
I put in a bluetooth adapter today and now my onboard wired connection isn't working. I had to put in a wireless card. ipconfig /renew gives me an error that says "An error occurred while renewing interface Local Area Connection : The name specified in the Network Control Block (NCB) is in use on a remote adapter. The NCB is the data." I tried completely removing the network driver and then updating them,didn't work.I've removed all the bluetooth drivers I can find in the device manager, nothing changed. Troubleshooting and having it reset the adapter doesn't work. Only solution I can find is removing an extra dhcp reservation that might be there and I have no idea how to do that.It's like my computer thinks that bluetooth device is supposed to be my new wired connection or something.
View 1 Replies View RelatedThe URL field in the web access log has a length of 70 characters. Is there any way to increase is[INFO] Mon Jun 13 21:30:30 2011 Website1234567890012345678900123456789001234567890012345678900123456789001234567890 accessed from 192.168.xx.xx
View 2 Replies View RelatedAny way to get the DIR-655 to e-mail logs? I have all the e-mail settings set properly, but when I request the logs to be e-mailed, I never get anything. Its not in a spam folder either.I do have the DIR-655 behind a 2wire router/DSL modem. I don't know if this is the problem, but I can send and receive e-mails from my computer which is connected to the DIR-655, so I don't think that is the problem.
View 6 Replies View RelatedDIR-615, HW rev. H1, FW v8.02
As the subject says... Sending logs using "On schedule" option doesn't work. I have my own personal email server I used to test this. When the router time reaches the defined "Start time" nothing happens. I tried both time formats (12h, 24h). The router does NOT initialize the process of sending the email. I see that in my server mail logs. If sent manually from Status -> Logs -> Email now, it works. If sent using "On Log Full" option, also works.
My old trusty Linksys router started causing BSODs on my computer (!) by crashing the IP stack, so I bought the DIR-655. No more BSODs, throughput to the web went way up, so all that was a success.Then I tried to set it up to send syslog data to my computer, and it was totally useless. Want to see traffic logs, not debug messages. After a lot of discussion with level-3 tech support, it seems that this router cannot send syslog data to a syslog server that shows the incoming and outgoing traffic IPs for monitoring a network.
View 4 Replies View RelatedIn status->logs sometimes the url is too long and is therefore cut with a set max limit number of characters. Is there any way to increase this character limit. I've been finding it very troubling because I am looking to log the entire url rather than just a cut up version.
View 1 Replies View RelatedI found this firmware 2.05WW for DIR 655 rev B1, I couldn't find any change logs or anything on the net about it.
View 3 Replies View RelatedI have a D-Link model DIR-625, and it always seems to disconnect when my mother logs on her computer. Is there some kind of setting on her computer that could be disconnecting us? When my dad is on his I never disconnect which is why I am wondering it must be something on her computer that's interfering with the signal or something. If I reset the router while she's still on, It will disconnect again within a few minutes. So where can I check if it could be her computer that's interfering with the signal?
View 1 Replies View RelatedRegion : Poland
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Orange/TPSA
My router TD-W8951ND remembers only a dozen of latest logs. Previous, older logs disappears. Why? Is there any way to force router to keep logs from, for example, the last 12 or 24 hours?It is important to me because i have some problems on my adsl line and i want to know what happens with connection while I am not in home or when I sleep.If it will be necessary I am able to log onto my router using Telnet, just give me required commands to fix this problem with logs.
Region : Poland
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Orange/TPSA
On my router TD-W8951ND constantly there are the same type errors, while using computer conected to the router:
Code:
2/16/2013 17:24:8> netMakeChannDial: err=-3000 rn_p=80544b08
2/16/2013 17:24:13> Last errorlog repeat 2 Times
[Code].....
Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Linpop
I have had my WR841N for about a year, supplied to me by my WISP. I like the router in terms of facilities but it seems to have one really annoying problem.
The router becomes inaccessible via the webpage after a random period of several days. I have at times associated the issue with occasional loss of radio broadband service but it is not always so. To try and further localise the problem I set the router up to send emails of the log to me every two hours from 17/04/2013 but today for the second time the emails stopped arriving after the 02:29 message and the router is inaccessible again. The router previously locked up with loss of broadband service on 26/04/2013 sometime after emailing a log at 02:41 on that day but had been running without issue from a cold restart at 12:25 as soon as I noticed loss of service.
Today I have not lost broadband service and so even though I am no longer receiving an emailed log or able to access the router via its webpage I am leaving well alone for the present. Some months ago when I originally noticed the web access issue I downloaded and installed the latest firmware TL-WR841N-v7-120201 and I note that there have been no further firmware releases for the v7 model.
My broadband service is delivered via radio link from a local transmitter mast and is reliable with typical download speed of 20-30Mbps and 30-40Mbps upload, seldom if ever affected by weather so I now feel the problem is inherent in the router rather then being the result of some issue affecting broadband service which has been solid since 26/04/2013
Without the log I have no way of knowing what was happening when the router became inaccessible but I attach the last 24 hours of received log below.
May 5 00:59:42 DHCP NOTICE DHCPC Send REQUEST to server d91650b2 with request ip c3cecc76
May 5 02:29:44 OTHER INFO Mail successfully.
[Code]......
how to turn off this logs??
*Mar 2 13:26:07.919: %SEC-6-IPACCESSLOGP: list 101 denied udp 79.2.199.68(57143) -> x.x.x.x (34803), 1 packet
Router#
*Mar 2 13:26:09.766: %SEC-6-IPACCESSLOGP: list 101 denied tcp 108.15.116.235(63864) -> x.x.x.x (34803), 1 packet
Router#
*Mar 2 13:26:11.276: %SEC-6-IPACCESSLOGP: list 101 denied udp 24.130.2.212(26935) -> x.x.x.x (34803), 1 packet
I cannot read ACS 5.3 logs from my WCS. I have the ACS server added to the WCS. Below is the message I'm getting:
Unable to connect to any ACS View Server.Failed to access the WSDL at: { URL}. It failed with: {URL}. Do I need to install any special module on the ACS to support this?
I have a question about VPN Concentrator FTP Backup configuration to get logs on FTP server. I have configure FTP Backup with all details but I still do not see any logs on FTP server. Do you know what could be the issue? I have never used Concentrator and not sure what needs to be done to get in working condition. I am using VPN Concentrator 3015 series.
View 5 Replies View RelatedI've noticed in the mornings lately when I get up around 6 am my internet will not work. Not on wireless or on my desktop. I decided I'd log into the router to see if there was a firmware update or anything. I had checked the logs and there are quite a few entries relating to DoS. I googled around and saw that it could be some sort of packet loss and the router is mistaking it for some sort of DoS attack. And that due to it not showing up multiple times every second it likely isn't a DoS attack. Here is a few from the logs:
[code].....
I am running two ASA 5520 routers synched up with eachother. I had a massive connectivity issue this weekend that I am investigating. Now I have figured out how to get the live logging but I need to know how to get the old logs from my router.
View 4 Replies View RelatedI have 3 ACS servers placed throughout N. America. I it set up so that ACS01 is primary and ACS02 and ACS03 are secondary. When i look at the logs for passed/failed authentications in radius or tacacs I cannot see anything from ACS03 logging. This is weird because just a few weeks ago it worked perfectly. In fact, ACS03 is the most active server since this site is using it for wireless phones and tacacs and the other 2 are just using ACS for wireless networking. I went through the log settings and every server is set up the same as the others (except the primary) so it should be logging ACS03 the exact same as 01 and 02.Anyway it seems like a small problem but i need the logs to work correctly to properly administrate security.
View 1 Replies View RelatedThere was a interface down in one of critical devices in the network.that particular log is not captured by the ciscoworks(DFM-alerts).
View 1 Replies View RelatedAre there any logs maintained in Windows 7 when someone changes his/her ip..I mean if I was previously at 192.168.62.111 and then I change to 192.168.62.110 would it get logged somewhere in my PC??How can I view it??And finally how can I destroy that log or stop this logging feature...
View 1 Replies View Relatedview a history of IPs that have connected to my computer. Specifically those that accessed my computer through a remote desktop connection? I believe I can check and see the ip while someone is connected but not after they disconnected.
View 1 Replies View RelatedI want to secure our WLAN via Web Authentication with our new Cisco 2504 WLC. But where do i find user activity logs?
View 2 Replies View RelatedWe recently had to rebuild our ACS server. Now when we have an 802.1x authentication failure and look at the RADIUS logs for the specific user, it does not show us the MAC address of the device the user tried to login with. We use this all the time because users have PDAs and other mobile devices that they save their passwords on. Then when they change their domain password on their laptop, they don't change it on their PDA which then tries to authenticate them using the wrong password and eventually locks them out. We need to see the MAC address so we can pinpoint which device is causing the lockout. The report I am generating is when you go to this location: Monitoring & Reports > ... > Reports > Catalog > User > User_Authentication_Summary
View 4 Replies View RelatedI have hardware version 2 and firmware 3.0.2.01 (latest firmware available for this hardware version I believe) and I cannot get it to email me logs. I have entered my outlook address and our SMTP server.The log says that it's failing each time it attempts. I have scoured the internet and I cannot find a solution that will work for me. I have found some talk of adjusting an MTU setting which is supposed to be located under the firewall / general tab.
View 1 Replies View RelatedI have turned on 'Local log' and 'output blocking event log' on my WRVS4400N v2 with latest fw.When I am clicking 'view log' button I can't see anything in empty fields. When I am trying to change logs genre I have empty fields all time.
View 1 Replies View RelatedI am using a 2851 router in mpls network. We had a power shut down activity recently and post to that i could not find any logs in the router.
View 4 Replies View RelatedI am trying to setup logging on my router. I want to use my gmail account / gmail SMTP server to send emails.
Does the router support TLS for SMTP?
Oh - and I also get the "critical error" page. I get it when I try to un-check the send logs checkbox in the remote logging management page.
I have a 5508 wireless lan controller we have two SSID configured Profile Name : Corporate and Guest When I go look at the Most Recent Traps all I see is Client with Mac address blah has joined your corporate, this goes on for sometime. But I am unable to see any of the Guest logs joining the network, I have since then grabbed my laptop and connected to the guest log. I still dont see any logs in Most Recent Traps for the Guest SSID WLAN configuration, I then blocked my Mac address and tried to connect again, No logs. I need to also montior the guest network is there some special tick box I need to apply for this to work? Once the guest is connected I can view them in the clients list but it never shows them on MOST RECENT TRAPS but I want to see the guests account connecting or failing to connect as we currently have a rogue device annoying me.
View 3 Replies View RelatedOK, so just mooching around in the pages of my switch, a 24 port switch and it has in the logs:
268InfoMay 15 22:43:51NIMInterface 26 is Link Down
269InfoMay 15 22:43:51NIMInterface 26 is Link Down
270InfoMay 15 22:43:51NIMevent(39),intf(26),component(2), on non-existent interface
Now, correct me if I`m wrong but my switch only has 24 ports and two of those (23 and 24) are dual personality jobbies!?Where the hell is port 26? Where did it come from? and why did it need to show up only for the switch to realise that it doesn`t really exist?
what is the meaning of the following log messages on Cisco 7604 Core routers. The Core router is configured with 2 STM card configurations with Vlan assignments: [code]
View 3 Replies View RelatedWe are using almost 10 Nexus 5k in our DC currently we are getting same error logs in all Nexus 5k." ntpd[4746]: ntp:time reset +0.279670 s " ,Is it major error or just for reset time?
View 1 Replies View RelatedI am receiving trace back logs in the 881G with 3G module. And after reload, the router is going to Initial Config. mode. What the latest IOS is?
Current IOS I am using is c880data-universalk9-mz.151-1.T3.bin. Any better IOS for complete efficient use of the PCEX-HSPA-G Module ?