D-Link DIR-615 :: Sending Logs Via Email Using Schedule
Feb 21, 2012
DIR-615, HW rev. H1, FW v8.02
As the subject says... Sending logs using "On schedule" option doesn't work. I have my own personal email server I used to test this. When the router time reaches the defined "Start time" nothing happens. I tried both time formats (12h, 24h). The router does NOT initialize the process of sending the email. I see that in my server mail logs. If sent manually from Status -> Logs -> Email now, it works. If sent using "On Log Full" option, also works.
View 6 Replies
ADVERTISEMENT
Feb 8, 2011
Any way to get the DIR-655 to e-mail logs? I have all the e-mail settings set properly, but when I request the logs to be e-mailed, I never get anything. Its not in a spam folder either.I do have the DIR-655 behind a 2wire router/DSL modem. I don't know if this is the problem, but I can send and receive e-mails from my computer which is connected to the DIR-655, so I don't think that is the problem.
View 6 Replies
View Related
Jul 2, 2011
No School havn't own email server, Just we want email within the Lab. (There are 20 PCs on all PCs Windows XP (Service Pack 2) & MS Office 2003 installed.Now tell me how can we send/receive email via using outlook.
View 1 Replies
View Related
Nov 4, 2011
sending emails from simply accounting- I don't have outlook installed on my computer- is there another way to send invoices,reports or emails from Simply Accounting to my customers if I or they don't have outlook installed
View 2 Replies
View Related
Feb 10, 2011
Firms that refuse to stop sending me emails, when I keep telling them to stop.
View 4 Replies
View Related
Oct 14, 2012
I will be configuring port forwarding to a phone system on the network for remote management. I would like to have the ASA send an email alert when a connection has been made to the open port. Is this possible to do and if so how to configure it.
View 1 Replies
View Related
Aug 29, 2011
I am trying to setup logging on my router. I want to use my gmail account / gmail SMTP server to send emails.
Does the router support TLS for SMTP?
Oh - and I also get the "critical error" page. I get it when I try to un-check the send logs checkbox in the remote logging management page.
View 5 Replies
View Related
Nov 5, 2012
We have a WAP 200 wireless G access point. It worked perfect before. About two weeks agao, we didn't change anything, it began to send empty alarm email every 10 minutes. We upgraded the software to newest version,restarted it several times. But till now, it still keep sending empaty alarm email.
View 1 Replies
View Related
Mar 5, 2013
I absolutely need to collect the router logs and send them to a syslog daemon or via email.
View 9 Replies
View Related
Dec 2, 2011
How i can transfer the router logs to email address.Wev are using the router 2600.
View 5 Replies
View Related
Aug 26, 2012
I have a dir-655 and have two schedules set up, one for weekend and one for week days, for wireless access. Is there a way to switch from one schedule to the other automatically?
View 1 Replies
View Related
Jul 25, 2012
Is there any way to schedule the shutoff of WiFi every night between certain hours?
View 1 Replies
View Related
Mar 24, 2012
Wireless is still on also after time set in the schedule is over. I connected to the router through its web page and set wireless on with schedule from 8 am to 9 pm. But wireless is running also after 9 pm. I checked the time settings on the router and they are correct. FW version is 2.01
View 1 Replies
View Related
Sep 10, 2012
Can I schedule a weekly reboot with this router?
View 3 Replies
View Related
Feb 27, 2013
I was just curious if there was a way to allow a computer and a ps3 to have unrestricted internet access while at the same time preventing other devices from connecting to the internet at a scheduled time (12 am to 8 am for example)?
View 3 Replies
View Related
Oct 17, 2010
Any way to schedule a reboot of a DCS2102?I've got 3 of them here, and they are very good but every now and then they seem to stop writing to the storage. They haven't frozen cause I can still connect to them via a browser
View 2 Replies
View Related
Dec 7, 2010
I have a wireless schedule setup on my DIR-655. Works great. Now I would like to run different hours on different days. Have wireless up on certain hours during the week, different hours on weekends.
How do I set up a schedule to one one set of hours during the week, and a different set of hours during the weekend?
View 1 Replies
View Related
Sep 29, 2011
Is it possible to get a time and date stamp on the image when using the FTP on a schedule? The time and date stamp is shown on a live video image on pages 20 and 21 of the manual but I'm not seeing how to get it on snapshots.
View 3 Replies
View Related
May 6, 2013
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP :
I have a flaky internet connection, and it drops every few days. I've thus far powercycled my router by unplugging and plugging it back in, which fixes the issue.
I'm traveling soon, and would like to be able to have access to my stuff remotely, even after the connection drops.
I have two ideas:Run a script in Windows 7 which would soft reboot the modem - free, not sure if soft reboot is enough though. If that doesn't work, Get a hardware which would powercycle the router - haven't researched if these are readily available and cheap
Is there a way to schedule a soft reboot of my router using Windows system tools? I'd schedule it to reboot every night.
View 9 Replies
View Related
Feb 19, 2012
This is on a DIR-655, firmware 2.01NA, hardware rev B1.Is there a limit on the number of DHCP reservations that can be added to this WAP?This WAP was working fine with 10 DHCP reservations (wired & wireless devices), 6 schedules, Access control of 2 devices by MAC (6 defined, only 2-3 active at a time).I started adding additional DHCP reservations, because I'm simplifiying my network, and when I add the 26th DHCP reservation I get the message "Schedule rules is Full! Please Delete an Entry."
I've been adding all of the new DHCP reservations as disabled, but I haven't assigned any schedules or otherwise to these new devices yet. So what's up with this message??
View 12 Replies
View Related
Mar 8, 2011
I realize that this is a new product, but nevertheless I have some feedback after running my 4 new DCS-930L camera over the past few days.
Currently, you can configure the camera to EMAIL/FTP images on a schedule or when motion is detected, but not both.
Why does it matter? Because I get flooded with email alerts after I get home from work and later in the evening every time I walk by one of the cameras or whenever a light switch is turned on/off.
If I could configured the motion detection to only alert during a specified schedule of days and hours, it would be great!
View 14 Replies
View Related
Feb 13, 2013
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1_121225
ISP : Cogeco
I bought the 4300 a week ago - and just recently discovered that you cannot turn off the wi-fi radio using a schedule.
I thought this was "wireless router 101" - since my last three routers had this feature... apparently not with TP-Link.
View 2 Replies
View Related
Jan 1, 2013
My iphone started resetting the connection every 2 minutes today. I noticed that the date maximum is Dec 31, 2012. My logs are getting messed up, and NTP isn't setting. Is there a firmware update for REV E3?? I'm at 5.10 right now.
View 11 Replies
View Related
Nov 21, 2012
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 110620
ISP : BE Broadband
I have an issue sending pictures via iMessage on iOS.
View 5 Replies
View Related
Aug 26, 2012
I have set-up an hotmail account (email box checked) as follwos but do not receive any eamil after the camera has recorded a new clip:
Recipient: [URL]
User name: same as above
Passowrd: my hotmailpassword�
Port: 587 (did try with 25; not better)
SSL/TLS
Sender email: An other email address as above
View 10 Replies
View Related
Jun 13, 2011
The URL field in the web access log has a length of 70 characters. Is there any way to increase is[INFO] Mon Jun 13 21:30:30 2011 Website1234567890012345678900123456789001234567890012345678900123456789001234567890 accessed from 192.168.xx.xx
View 2 Replies
View Related
Oct 8, 2011
My old trusty Linksys router started causing BSODs on my computer (!) by crashing the IP stack, so I bought the DIR-655. No more BSODs, throughput to the web went way up, so all that was a success.Then I tried to set it up to send syslog data to my computer, and it was totally useless. Want to see traffic logs, not debug messages. After a lot of discussion with level-3 tech support, it seems that this router cannot send syslog data to a syslog server that shows the incoming and outgoing traffic IPs for monitoring a network.
View 4 Replies
View Related
Mar 2, 2011
In status->logs sometimes the url is too long and is therefore cut with a set max limit number of characters. Is there any way to increase this character limit. I've been finding it very troubling because I am looking to log the entire url rather than just a cut up version.
View 1 Replies
View Related
Aug 27, 2012
I found this firmware 2.05WW for DIR 655 rev B1, I couldn't find any change logs or anything on the net about it.
View 3 Replies
View Related
Apr 9, 2012
I have a D-Link model DIR-625, and it always seems to disconnect when my mother logs on her computer. Is there some kind of setting on her computer that could be disconnecting us? When my dad is on his I never disconnect which is why I am wondering it must be something on her computer that's interfering with the signal or something. If I reset the router while she's still on, It will disconnect again within a few minutes. So where can I check if it could be her computer that's interfering with the signal?
View 1 Replies
View Related
Feb 16, 2013
Region : Poland
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Orange/TPSA
My router TD-W8951ND remembers only a dozen of latest logs. Previous, older logs disappears. Why? Is there any way to force router to keep logs from, for example, the last 12 or 24 hours?It is important to me because i have some problems on my adsl line and i want to know what happens with connection while I am not in home or when I sleep.If it will be necessary I am able to log onto my router using Telnet, just give me required commands to fix this problem with logs.
View 3 Replies
View Related
Aug 8, 2012
I have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
1. How FWSM create xlate table like that? I mean it look like NAT0 for 158.137.21.26 but it doesn't has any nat rule for 158.137.21.26 on firewall.
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
3. After clear xlate global 158.137.21.26, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.
View 1 Replies
View Related
May 28, 2011
I have recently purchased six quantities of DIR-655 for my home use. When I registered them these six product, at the end of each registration, I got the message that I will get an email confirming the registration.I didn't get any email. I have checked my email span box and filter too.
View 6 Replies
View Related
