Geting this message, having low performance and overrun errors Apr 29 13:45:59 pix-servidores %PIX-4-500004: Invalid transport field for protocol=TCP, from 188.120.243.238/80 to 174.56.110.0/0
View 3 Replies
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1
ISP : Kabel Deutschland
the firmware offers 3 different dyndns services. But opendns is not included, also there is no free field to choose protocol, server, password and network. Will this be updated in further firmwares?
What does a firewall block at the transport layer?
View 1 Replies View RelatedIs the 5512 able to be field upgraded to a 5515 and so on through 5555? I.E. Can I add ram and other hardware to make the boxes more powerful as my requirements increase? I was hoping this would have been a new feature with the ngen firewalls.
View 3 Replies View RelatedI am setting up a new ASA. Actually it's an old 5510, but this is a new temporary install until the one we ordered comes in. Everything is working except for SSH. I have SSH open on the inside and outside interfaces and I get a prompt when I try to SSH to it from either the inside or outside. But after I put in my username and password it tells me that my credentials are invalid. I am using a local username/password, not AAA and it accepts that username and password for the console. Console and telnet (password only) both work so I can get in to make changes. When I debug SSH, the error states that my username and password are incorrect. But this happens even when I create a new, simple username/password to test. I've even gone so far as to copy/paste the username and password into the login window just to be safe (making sure I don't copy spaces, etc). Below is a copy of the SSH Debug output followed by a sanitized copy of the config. I have AAA configured for remote VPN users, but not for access to the ASA. Also, this problem existed before I created the AAA settings for the VPN users. Also, I have zeroized and regenerated the RSA keys a couple of times to no avail. [code]
View 2 Replies View RelatedI've just got my hands on a Cisco PIX 515. I mainly brought it too learn and play with, i done some Cisco stuff in the past but not much.
I just need too get this up and running with a IP Address on ethernet1 (192.168.1.254) but when I run the command "name if ethernet1 inside security100" in enable mode all I keep getting is ERROR % Invalid input detected at '' maker
Two 5520 firewall configuration of the failover and SSH, the first remote landing SSH, can use user and password successful landing, again landing, to prompt the user name password is invalid, what is the reason?
View 4 Replies View RelatedTried setting up a Shape Policy and it states its invalid. Worked fine on my 5520, just curious to know why its coming as invalid now
ciscoasa(config-pmap-c)# shape
^
ERROR: % Invalid input detected at '^' marker.
ciscoasa(config-pmap-c)# shape ?
ERROR: % Unrecognized command
Whenever I use the following command I get an invalid input error
ciscoasa#conf t
ciscoasa (config) # crypto isakmp enable outside
ciscoasa (config) #object network net-local
ciscoasa (config-network) # subnet 192.168.101.0 255.255.255.0
^
I have reset the firewall (cisco 5505) to factory default. The marker ^ is under the subnet
ASA5510, ASA 8.0(4), ASDM 6.1(5), this is a productino ASA with plenty of lookups working through its 3 interfaces - outside, inside, dmz. The problem is a new use. I've segmented a switch on the inside network with a VLAN, and have a workstation routing through the switch to the default VLAN where all other hosts on the inside network reside so far. The ASA inside interface is the default gateway for the inside network. My test worksttion can PING inside hosts, so the static route is OK.
ASA 10.1.1.2/16 DNS Server 10.1.5.1/16
| |
------------------------------------------------------------------
|
Switch 10.1.8.20/16
[code]....
But lookups fail, Wireshark says the test workstation sends, the dns server receives and responds, but the test workstation never receives. I used the Packet Tracer tool, it gets to the last step syayin OK then finally "inspect-dns-invalid-pak". I can't find any more there to tell just what is invlid about it. So I'm trying to figure out global inspection. Here's an extract from the config:
class-map inspection_default
match default-inspection-traffic
!
!
policy-map global_policy
class inspection_default
[code]....
I'm looking to make a possible configuration for a customer. They need a device to provide :- firewalling- bandwidth limiting based on protocols, IP, users- web content filtering- good reporting to see which device/users are consuming most of the bandwidth.I used to use cisco ASA as firewall but it's a while I last installed on and I'm nt uptodate which current state.So I thought of using an ASA 5512-X but I'd like to know if it comply with all the requirements .Most important being the reporting and bandwidth limiting capability. It would be great to have some configuration example regarding bandwidth management.
View 1 Replies View RelatedI have a Pix 515E running PixOS version 8.0.4 with two interfaces, inside and outside.On the inside interface, I have a Redhat Enterprise Linux 5.4 64 bits machine as an NFS server version 4 (NFSv4).On the outside interface, I have three (3) Redhat Enterprise Linux 5.4 64 bits as NFS clients.I am looking for the exact UDP and TCP ports to be added to the ACL in order to accomplish
View 1 Replies View RelatedWhat would be the access-list entry to allow protocol 97? I am setting up foreign-anchor controller and need to allow protocol 97.
View 1 Replies View RelatedI have a ASA 5520 which is intended to use as a VPN for clients using PDA, I think the PDA is a very old product that the VPN only support CHAP/ MS- CHAP, but seems it cannot connect the VPN, it will prompt "invalid username and password" (but in fact the username and password is valid when using PAP), below is the log i captured from the ASDM when the PDA is connecting the VPN. when i tried to connect it in windows PC, I also have the same issue if the VPN setting is using MS-CHAP, if I choose PAP, it can connect with no problem. But the PDA has no option of PAP. [code]
View 0 Replies View RelatedI have connected an ASA 5505 to an ADSL router that is able to assign the IP address and the also the DNS servers for the ISP for the outside interface. The ASA is loaded up with IOS "asa842-k8.bin"
I am using vpnclient with a hostname as oppose to an IP address to connect to a headend remote server. If I hardcode the DNS servers IPs in the "dns server-group DefaultDNS" I am able to resolve the hostname. If I then remove the IPs from the group and rely on the dhcp to assign them, when I try to resolve the name I have an error at the console "ERROR: % Invalid Hostname"
On the inside interface and network, we have a server at, (as an example) 192.168.87.1, which acts as an email server.
The outside ip address of the ASA is, say, 200.0.0.1.
The ASA directs any imap requests from the outside interface to 192.168.87.1, which works fine from the outside. Users simply open up email, and collect emails etc.
When they come inside the office, their machine of course attempts to contact the ip address 200.0.0.1. the ASA knows it is outside interface, so they are unable to collect emails.
that any internal IMAP requests from machines on the inside to 200.0.0.1 are directed to the machine inside on 192.168.87.1?
I would like to connect a second ISP link to our ASA 5510 to solely serve http traffic from our organization's employees (ie. web surfing). We currently have all employee traffic and two site-to-site VPN tunnels connecting to the internet from this firewall. I want to keep the tunnels as currently configured on the existing connection and split out http/https traffic from our staff onto a less costly link.
View 1 Replies View RelatedWhat protocol the firewall configuration replicate and monitor the interfaces?
View 1 Replies View RelatedI find it hard to understand tunnel and transport mode, the differences between them, and NAT. Ok so I have this scenario: Site2site VPN with 2 Cisco routers.
View 8 Replies View RelatedI just got my PIX515e configured and thought I had it working correctly, but on my 3745 router, the line protocol is down, I've looked through the configs for bot the PIX and the 3745 and can't seem to figure out why I don't have access.
Pix515E config:
pixfirewall# show run
: Saved
:
PIX Version 8.0(4)32
!
hostname pixfirewall
domain-name home.jkkcc.com
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
I am trying to use the apple finder/application to view all my apple mac-mini computers. I do have two asdm-5505 connected via a vpn tunnel.
At this point I can view only the computers on the local subnets. I called AppleCare and they gave some possible ports that can be opened in the firewall to allow the Bonjour protocol to pass through the ASDM:ports 5297/tcp, 5298/tcp-udp, 5353/udp, and 5354/tcp
We have a PIX with 3 interfaces. Inside, Outside,DMZ.
On my DMZ we have some clients that come in and remotely connect back to there office via MSPPTP. I setup the ASA with this to get rid of the error message: regular translation creation failed for protocol 47 src
policy-map global-policy
inspection_default
inspect pptp
Now when the dmz client tries to connect back to there PPTP server I get the following error.
172.31.10.204 0 24.172.85.162 37624 Teardown dynamic GRE translation from dmz:172.31.10.204/0 to outside:24.172.85.162/37624 duration 0:01:30
172.31.10.204 1069 173.188.74.155 1723 Deny TCP (no connection) from 172.31.10.204/1069 to 173.188.74.155/1723 flags PSH ACK on interface dmz
172.31.10.204 173.188.74.155 63767 Teardown GRE connection 8393958 from dmz:172.31.10.204 to outside:173.188.74.155/63767 duration 0:01:08 bytes [ code]...
I have "transport local ssh" but its still allowing telnet??This is a 2960 switch Here is the end of running config:
Code:
I'm now trying to implement a IPsec VPN network over transport mode in my simple network environment.I got two Cisco 2811 routers connected each other and each router hosts a client PC running Windows7.
I have finished the configuration on both routers and make them running over transport mode.However, as what it should be, transport mode indicates the communication between two end stations (two PCs) the client PC (install or configure something) to make the network fully works?
I would like to transport two time slots (TDM traffic) over an IP network in order to connect two telecom devices located in different sites, i have cisco 2811 routers on both sites with ip advanced services 12.4.20T IOS
View 5 Replies View RelatedWe have cisco 7600 Router with 76-ES+XT-4TG3C Module connected. The Module is getting detected after upgrading the Router with SRD5 IOS.Below are the testing which we have done on the Router but we are facing the issue while configuring the Transport mode LAN and Transport Mode WAN:Brief about this is:- 2 Cisco 7606-s Router with Module 76-ES+XT-4TG3C each.- two ports on 7606-s Ten2/1 & Ten2/2 are configured as a Transport mode WAN while Ten2/3 & Ten2/4 are configured as Transport mode LAN.- We connect Fiber Cable from LAN Port to MUX and from MUX to 2nd LAN Port of the same Router. Same thing we tested by using the WAN Port-MUX-WAN Port connection.- Now on MUX end LAN port, connected Single and Multi mode fiber and on 7606 end 2/4 port which is configured as transport mode LAN, using Multimode SFP module -> XFP-10G-MM-SR, port did not came up then replaced 2/4 port with single mode SFP ->XFP-10GLR-OC192SR port came up. this is testing for LAN.- For WAN testing on MUX end used WAN port and on 7606 end checked with single mode and multimode fiber and with single XFP-10GLR-OC192SR / mulimode XFP-10G-MM-SR SFP, port did not come up.Wanted to know 1) If we have to go for Transport Mode LAN then which SFP/XSFP Module should go with along with the Single/Multimode Fiber.2) If we have to go for Transport Mode WAN then which SFP/XSFP Module should go with along with the Single/Multimode Fiber.Anything else is required while configuring the Transport Mode WAN as this is for Packet-Over_SONET/SDH? 3) MUX Side change is required while connecting both of this Modes on Cisco 7600 Router.4) Is hardware of the Router is giving any issue? Though we tested by connecting Back to Back LAN Port as well as Back to Back WAN Port. In both the situation the Ports are coming UP.
View 1 Replies View RelatedI have a Linksys E2000 router & a HP Officejet 6500A PLUS all-in-one printer. While printing, at a certain moment, the printer stops printing, rolls the sheet out & act like nothing happened. But, when i use an adhoc connection, the printer works just fine. So i think there has to be something wrong on transport (router?)
View 5 Replies View Relatedusers whose status is manually disabled don not have difficulty in authenticating and access managing nework devices. that makes me wonder what is the difference between status enabled and disabled?
View 44 Replies View RelatedI have a requirement to connect two 3750 switch with 10G speed between two sites with 150km distance. We will lay-out our own fiber (48 core) between two sites. I just want to consult the following:
1. Could i use two core switch 6500 with single mode fiber as a transport equipment?
2. Or i need to use SDH equipment because of the distance concern? If so do i need a repeater?Could i use Cisco Metro Core ONS, which one?
3. Any other option to achieve this requirement?
I know that very few people have their wireless controllers on version 7.4.100. But has any one noticed that the NAT IP address field in the management interface configuration menu is missing?, although it is mentioned as being present in the WLC 7.4 configuration guide. This would definitely affect Office-Extend.
View 4 Replies View RelatedI'm running VPN SSL on an asa 5520 (V8.2.5) with LDAP authentication and everything works fine but now the AD people changed name in the groups and they added a " " "blank" in one of the fields so when I configured the group I get an error.
for example:
map-value memberOf CN=VPN_SSL_ABC,OU=External,OU=XXX,DC=ext,DC=local ABCPolicy
but this does not:
map-value memberOf CN=VPN_SSL_ABC,OU=External Group,OU=XXX,DC=ext,DC=local ABCPolicy
Is there any way to insert a space in the OU field?
The URL field in the web access log has a length of 70 characters. Is there any way to increase is[INFO] Mon Jun 13 21:30:30 2011 Website1234567890012345678900123456789001234567890012345678900123456789001234567890 accessed from 192.168.xx.xx
View 2 Replies View RelatedThis network has a peer network with a mixture of Win 7, Vista and XP computers. The network problem I am having is with an XP computer that was able to access network shares on a Win 7 Pro (64-bit) computer yesterday, but cannot today. I tried repair steps that have worked for me in the past, but didn't today.
1. Rebooted.
2. Turned off Windows Firewall.
3. Re-ran the Network Setup Wizard and select turn on file and print sharing.
4. Changed IP configuration to choose NETBIOS over TCP/IP.
5. Uninstalled AV software.
Error Messages that I have been receiving:
1. When attempting to connect to a share on Win 7 PC: "Microsoft Windows Network: The specified server cannot perform the requested operation. The connection has not been restored."
2. When trying to view the computers in the workgroup: "Workgroup is not accessible. You might not have permission to use this resource. Contact the administrator of this server to find out if you have access permissions. The specified server cannot perform the requested operation.
3. When using the command, "NET VIEW" from the command prompt: "System Error 58 has occurred.
4. Event Log: Browser error 8032. The browser service has failed to retrieve the backup list too many times on transport DeviceNetBT_Tcpip_{06ECF93A-1B89-4FF4-923E-F3302EF95FE1}. The backup browser is stopping.
