Internet Keeps Disconnecting From Laptop / But Still Active On Other Mediums
Feb 4, 2013
Can't get internet connection to stabilize, keeps disconnecting.My laptop keeps cutting off from the internet, yet the internet itself is fully functional, as I can still use it for my mobile, and I have not had any problems with it disconnecting during online Xbox360 games.I have fully read through the thread I just linked as he obviously got his problem solved, however I know very little about computers and cannot understand the majority of the solutions/attempts that he tried.I have done the obvious and turned the router off for several ideas before trying again, but nothing has worked for far.
I'm aware that the problem this user posted was eventually solved by getting a new modem/router? however before doing so I want to make sure I have tried everything else possible.I have just read through the pre-posting requirements, I would have done it beforehand obviously but I overlooked them, my mistake. I will have to wait until I am home again before completing these.
View 9 Replies
ADVERTISEMENT
Feb 27, 2011
I have a Dell laptop and the internet keeps losing connection for a minute or so all the time. Have checked internet connection, etc and seems fine. Also, I play Xbox online and it never losses connection when Im playing so can only think that it must be laptop.
View 2 Replies
View Related
Oct 15, 2011
I have a HP Pavilion G56-105SA. Here is my problem whenever I connect my laptop to the internet via wifi, I get random disconnects, and they are completely random. It can be minutes or hours without a disconnect, it only happens when I am on wifi and only with this laptop. I thought it might be a modem problem (my modem is also my router), but got a new modem and still the same thing. I have reformatted my laptop back to factory settings because it worked fine for a long time, still the same thing. I have also updated my drivers and changed the channel to one no one else was on. What could be causing this?
View 13 Replies
View Related
Jan 14, 2013
So I have 2 laptops, a win 7 and a win 8,The windows 7 laptop works on the internet fine, but the windows 8 one always disconnects, even when the win 7 isn't on.It disconnects usually when I'm running multiple programs that use the internet on it, but when I run a game like counter-strike, it disconnects too, but not nearly as often.The router is from 2008 or 2009, but it's a tiny aztech one. I'm sure it's not the isp, because like I said, the other laptop works fine.
View 2 Replies
View Related
Sep 25, 2012
My Toshiba Qosmio f60 keeps disconnecting from my router. The only way to fix this is to restart my pc which is a huge pain cause my laptop starts up at the speed of snail.
I just got my router a few weeks ago. It's the Netgear r6300 802.11ac, which supposedly has insane speed and great range, although my speed hasn't changed at all and i disconnect more often than with my old router.
When my laptop disconnects my iphone still remains connected to WiFi, even though it's the same distance away from the router, also no other computer in the house has these problems, though they are a floor above me (routers on the top floor).
I think my wireless card is the Realtek rtl8191se wireless lan 802.11n pci-e nic.
View 2 Replies
View Related
Dec 24, 2011
Is there anything i can do to get my dell laptop with windows 7 to stay connected to my router. i have my old desk top connected to it also and i have no problems with the desk.top
View 1 Replies
View Related
Jan 30, 2013
i have Dell inspiron laptop windows 7 operatinbg before my internet was working very well but in last 3 months i have been struggling alot with the internet browsing problem, my internet is connected and actvie, skype, yahoo eveything, torrent download is 100% working but when i open any browser the error message comes that CANT OPEN THIS PAGE MAY BE INTERNET CONNECTION NOT CONNECTED. i did all antivirus and reinstall the windwos but still the problem is active.
View 4 Replies
View Related
Jul 17, 2012
I have a pair of ASA 5520s operating in failover pair as active/standby, having two contexts on them. I am planning to share the load and make it active/active making first context active on the primary unit and second context active on the secondary unit. My question is if this will disrupt any connectivity thru these firewalls when I do "no failover" on the active/standby and assign the contexts to different failover groups and enable the failover back.
View 6 Replies
View Related
Mar 28, 2011
My dell laptop keeps disconnecting. It connects for 30secs to a minute i can get ebay site open then it disconnects.
View 1 Replies
View Related
Jan 30, 2012
it just disconnect from the wireless and then it automaticly reconnect and the it redisconnect and so on.
View 1 Replies
View Related
Jul 14, 2012
My wireless connection on my laptop keeps disconnecting. It seems like it disconnects every 5-10 minutes. I know it's not my router because my cousin came over and had zero problems with his wireless connection. I have to reset my laptop at least once a day because it decides there are no wireless connections and I can no longer right click it if this happens. Every once and a while I'll just have to unplug my router and plus it back in to fix the problem if trouble shooting wont work.
View 5 Replies
View Related
Mar 22, 2013
I have 2 laptop, a Toshiba and a MSi, both wirelessly connected to a Zyxel router. The toshiba laptop worked just fine for me, never disconnect, but the MSi started to act up since I got this router. Sometimes it disconnect from the router every 5 mins, it can still detect the network, but then I have to troubleshoot it to reset the adapter if I want to reconnect it. The problem I got from the troubleshoot is " Problems with adapter or access point". Before I bought this router for the current cable service, I had a DSL service, my laptops can connect wirelessly to the DSL modem, without router and they worked just fine, so I don't know if the problem is from the router or the laptop.I searched for solutions everywhere on the internet, yet they are the same : update firmware, drivers,.I even reinstalled windows so many times yet it remains the same.
View 7 Replies
View Related
Apr 3, 2011
My wireless decided to disconnect and reconnect randomly throughout any time I use it. Thought it maybe the the router so bought a new one Netgear and its was fine for the first 48 hours and now its keeps doing the same again. Its fine if I plug in the ethernet cable so no the modem and router are fine. Not sure what it is, my Toshiba laptop is probably about 5 years old - is it time for a new one? Is it something simple or what?
View 5 Replies
View Related
Aug 3, 2012
Wifi says connection is available and that it is full strength yet every 15-30 minutes it disconnects and a box pops up saying click to reconnect, yet it will not reconnect.... I have to totally reboot the computer to get back on wifi and I lose whatever I have done are am in the middle of
View 1 Replies
View Related
Nov 27, 2011
I bought myself a DELL INSPIRON 1564 almost 2 years ago. I have been using a DLINK router MODEL DIR 635 ever since.It worked flawlessly. Now, i moved to a different part of the city and i had to install an internet connection. The connection is the same i used before - 100mbs fiber-optic. The only problem now is that the internet connection keeps dropping 2 3 times a day.Sometimes my laptop sees the wireless connection we set up,sometimes i have to wait one or two days to connect.Furthermore my laptops SEES like 10 other wireless connections except MINE!!!( if i go to a friends place the laptop sees his internet connection and works, the same if i go to any other place with a wireless connection) I live with 3 other people, they all have laptops and theirs work fine even after we reset the router. I also own a desktop PC, i bought a wireless adapter for it and surprise even the PC sees our wireless connection,,even my mobile phone,every other device except my laptop.
OS: Windows 7 Ultimate x 64
Dell Inspiron 1564 core i3 , 2gb RAM ddr3, Intel GMA 4500mHD
View 2 Replies
View Related
May 22, 2011
I have a Acer aspire 5742 laptop using Windows 7. Recently the laptop keeps getting disconnected from the router when using wireless, nothing has changed recently at all, except for sky being put in and using the same splitter not sure if this would affect it or not? Is there anything i can do? Like change the wireless channel or something?
View 2 Replies
View Related
Nov 24, 2007
Laptop keeps disconnecting from WRT150N
View 9 Replies
View Related
Dec 4, 2010
My Inspiron 6400 network card keeps disconnecting from my wireless network. In order to get it working again, I have to turn off the wireless fn key and turn it back on again. This usually works for a few minutes than I lose connection again. Is there anything I can do to correct this?
View 20 Replies
View Related
Sep 11, 2012
What should i do to my laptop so that the wifi could not turn off frequently it is dell inspiron 5010.
View 1 Replies
View Related
Mar 12, 2011
i have an acer laptop an iphone and an xbox360 running on my connection not always all at once but my connection just randomly cuts out at any point whenever im on xbox live i get disconnected and i look at the router and its just resetting itself and i have to go and reboot it or just reset it and wait a wile before it will come back on. but even when it is on its not for long before it goes off on its own
View 2 Replies
View Related
Mar 20, 2012
I am looking at deploying a pair of 5585X's in an active/active multiple context state. I am creating Mulitple contexts that need to be able to route to each other. I was going to deploy a type of Gateway context that has a shared interface to all of the other contexts, instead of sharing interfaces directly between the contexts, i beleive this will work as basically i am just cascadng the contexts and sharing interfaces.
The main problem i have come across, is that if i deploy active/active across two appliances using 2 failover groups i can not see a way to route between them, for example.
I have Context 1, Context 2 and Context GW A including the shared interfaces of Con1 and Con2 in failover group 1 on appliance A with the respective standbys on Appliance 2. I have Context 2, Context 4 and Context GW B including the shared interfaces of Con 3 and Con 4 in failover group 2 on appliance B with the respective standbys on Appliance 1.
I need to be able to route traffic between Context GW A and GW B so that the contexts can communicate in normal operation and in failover. I do not beleive that I can share an interface between contexts in two separate failover groups and to be honest without adding a L3 device between the appliances i am not sure if this is possible.
View 9 Replies
View Related
Dec 17, 2012
I have two ASA 5510s running in Active/Active mode. I need to make config changes on them. How do I go about it? Do I power off the secondary ASA and make the config changes on the primary and then power on the secondary ASA ? Or this another way to do this?
View 3 Replies
View Related
Jun 1, 2011
I have an ASA5520 in location A with an ISP connection and a matching ASA5520 in location B with a separate ISP connection. We have fiber connecting the two locations and vlans passing back and forth so I will be able to configure the failover via a vlan as well as extend the ISP's to each location via vlans. The Active/Active configuration with the multiple security contexts does not seem to be an issue but how is a redundant ISP configured in this mode?We want to have context A using the ASA in location A with ISP1 as the primary and failing over to ISP 2 in locaiton B We also want to have context B using the ASA in location B with ISP 2 as the primary and failing over to ISP1 in location A Would route tracking provide the desired result? Is there a better option?
View 1 Replies
View Related
Feb 7, 2012
The 6509 Series Switches support the scenario VSS Active-Active Chassis, I would like to setup both switch's as one virtual switch but working at the same time, not with Active - Stand By Chassis.
My plans it to create PortChannel accross both Switches 6509 in order to have 2 links one connected to one slot/switch and the other connected to slot/switch in the second 6509 for servers redundancy.
View 1 Replies
View Related
Jun 10, 2012
I am working on a network which has two ISP connections (Active/Active) terminating on router (ASR1000). From the LAN side (6500 switch) all the traffic need to be route on ISP1 but some of the specific subnets like 10.250.0.0/16 need to be route on ISP2 connection.
I am planning to use PBR and NAT with route maps. any documents or refrences are provided.
(access switches)---------(core switch)----------(routers)----------------(ISP1)
----------------------(ISP2)
View 1 Replies
View Related
Apr 10, 2011
I faced one problem in our core switch 4507 R . Active sup lost connection and standby came active. We got lot of errors/alerts on console shown below. [Code] Also when I reloaded the switch with reload command only both sups got reloaded but I want to reload all the modules but reload command do not gives any options for that.
View 2 Replies
View Related
Mar 30, 2011
I have 2 asa 5520 firewalls including and 1 AIP-SSM-10 module in each of them. the configuration is set using active/active failover and context mode.
Both of them run individualy the IPS module. The IPS is configured using inline mode and fail-open option. However when one of the module fails and the state is changing from up to init or anything else making the IPS to fail then failover is detected and ASA consider it as failover and bounce context to the other unit.
IPS soft is 6.0(4) and ASA soft is 8.0(3)
I have checked cisco doc and it is confusing to me. it says: "The AIP-SSM does not participate in stateful failover if stateful failover is configured on the ASA failover pair." but it really does participate. Running is not really an option because of production network impact matter..
View 2 Replies
View Related
Sep 19, 2011
We have an Active/Active ASA 5520 setup, as i know in Active/Active setup there is no remote VPN access, So i could overcome this limitations?I have a solution but i dont know if it is ablecable or not? we have a spare ASA 5510, so i can use it behind Active/Active Firewalls and assign a public static NAT IP address to it and open all IPSEC and VPN ports and let the remote users to connect to it, is this ablecable setup or not?
View 1 Replies
View Related
Dec 27, 2011
its possible to set up active/active failover using etherchannel on 5585s?
View 1 Replies
View Related
Mar 17, 2013
How to Configure ASA5520 for Active/Active
View 8 Replies
View Related
May 7, 2007
our application team is mandating, that the solution we should come up with for SLB, should support Active/Active mode of SLB operation.
My question, is this mode of operation supported/accredited by Cisco, and what is the draw back from the traditional active/standby.
View 2 Replies
View Related
Oct 4, 2012
internet won't stay connected for more than 2-4 minutes at a time. I recently got a new modem, as recently as two days ago. It connects fine but within 2-4 minutes it disconnects then reconnects itself within 20 seconds. It's a plusnet modem and in the corner of my screen I have a little computer screen with 3 signals coming out if it which flash. It's called Wireless Network Connection Status. Beside it are 4 bars not too dissimilar to mobile signal. They too are green and when I click into it it's called Dell Wireless WLAN Card Utility.
View 1 Replies
View Related
Jan 6, 2012
Haven't been here in a while after going to grad school. My internet keeps on getting disconnected, and I keep having to unplug the power cord, wait 10 seconds, and then it works again. But this has been happening quite frequently. Is it because I need a new router? It is Linksys SRX 200 router it says.
View 6 Replies
View Related
