I've created a hostname & account with [url].... for my vpn setup.It was working fine until 2 days back. owa was accesible and configured MS Exchange on iPhones.
Suddenly it stopped working.The updation of IP from ISP is happening @ chnageip.com site, but when we ping the hostname, it is not resolving to new ip and is not pinging.Our users outside the coporate's internal network is unable to access.
i'm trying to use VNC as a remote desktop i was told to forward port 5900 in order to connect. but whatever i do i still an error saying that the port is not forwarded..Connection test failed.VNC Server appears to be behind a NAT router with IP address x.x.x.x. You will need to configure that router to forward port 5900 to this computer before you can connect to VNC Server over the Internet.as you can see here the port is forwarded to the server computers local IP.i have no firewalls active, and no anti-virus software that could be blocking VNC.
View 1 Replies View Relatedi am using internet in my office where some websites are blocked like FB.in my office proxy server is being used.i download the portable hotspot shield to use FB. but i did not connected. During the time, when hotspot maintaining connection a msg has been written "waiting for the response from secure server."
View 2 Replies View RelatedI am trying to figure out how to give computers that connect to my LAN limited access. I have heard that some viruses, though rare, may travel through the network and infect all computers on the network. I want to prevent this. Is there any way to give computers connected to my network strict access to only the internet to prevent viruses or any other harmful attacks?
View 1 Replies View RelatedI configured a dynamic vpn(easy vpn) in a cisco isr. But the vpn clients cannot access any of the lan devices. VPN pool is 10.0.0.1- 10.0.0.20 & internal netwrk add is 172.17.x.x. I tried to disable zone based firewall but no resultout[CODE]
View 1 Replies View RelatedHow can I block and make sure no one has remote access to my computer
View 1 Replies View RelatedI installed Comodo Firewall today, and I couldn't access my Internet from then. I actually liked it's UI and all and want to keep it. The only something that I felt that might be causing the problem is "Use Comodo Secure DNS Server"? Is it likely the reason to be the cause of the problem?
View 1 Replies View RelatedI'm having some problems with a sonicwall pro2040. The problem is this: I can access the sonicwall remotely, and I can ssh into the sonicwall and ping various websites, and get replies, but my connected PCs (Connected by the LAN port) have no internet access. I have never set up a sonicwall before this one, and I feel like there is something I may be missing. Do Sonicwall devices block WAN access by default? Do I need to configure the default route?
View 6 Replies View RelatedI am running a Kodak all in one printer through a Billion 7800n router. The desktop computer running Vista is hard wired and the portable running Windows 7 is wireless to the router. The Printer is hard wired to the Billion router. Where are running Norton 360 on both computers. Everything was running fine until two weeks ago and we get the error that the firewall is stopping access from both computers. I have tried turning off Norton but no effect so I assume it has something to do with the firewall on the Billion 7800n router? Why stop now after several weeks of working fine after setup?
View 8 Replies View RelatedPreviously we had no problem with remote users connecting via VPN but recently they can't connect and i've checked the firewall and it shows the errors (see attached jpeg) but I'm not sure what it all means.
View 2 Replies View RelatedI need remote access to certain programs on my home PC but I just cannot get it to work.
Program:- webcamXP
When I set the programs port preferences (i.e. port 8087), I can connect with"127.0.0.1:8087" and webcamXP work fine. But when I replace the localhost with my external IP (lets say 79.149.114.227, so that would be "http://79.149.114.227:8087".I tried port forwarding: I have added the port to my NAT in the router's setting so it should be fine, but it is not (numbers are fictual of course):
external port start 8085,
external port end 8089,
protocol TCP/UDP,
internal port start 8085,
internal port end 8089,
server IP address 192.168.1.215)
I also tried disabling AVG Internet Security 2011's firewall temporarily just to check it it was blocking it, but got the same result.I checked if Windows own firewall was on, but it is off.I cannot find any setting in the router's own configuration screen to disable any build in (router's) firewall (if it has any).
So, I have this router at home a WRT150N. I put in access restrictions so my siblings won't stray onto unwanted pages.I enabled SPI Firewall Protection and what do you know, it worked. The next day though, we didn't have an internet connection.I checked everything with the modem (power cycles, etc.) and then I tried the router. Upon disabling SPI Firewall Protection, the internet connection came back.I tested it yet again, to see if it really was the SPI. Enabled and bam, no internet access again. I made sure to select "Allow" in the Access Restrictions for "Internet access during selected days and hours" making sure also that "Everyday" and "24 Hours" are selected.Now my question is, what do I need to do in order to enable my Access Restrictions without having to lose internet connection via the SPI Firewall?
View 2 Replies View RelatedI am configuring Site-to-Site VPN with another company. I already make a couple of tunnels but with this one I have a problem. They I already using on their side my local network 192.168.10.0/24 (server is 192.168.10.10) so we need to use imaginary network 172.16.0.5 as server address. Now I need to do NAT 172.16.0.5 to 192.168.10.10 but I am not so good in that.
View 1 Replies View RelatedIs it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies View RelatedI'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View RelatedI want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
View 2 Replies View RelatedSome security tools and techniques for wireless LAN??
View 1 Replies View RelatedHow can I get the security key password for my iPad?
View 2 Replies View RelatedI have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
View 3 Replies View RelatedI have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
View 8 Replies View RelatedI opened my iTunes program today and noticed a roommate's MP3 files were picked up on my network. I think the name of the program is Rocket Tube MP3. Anyway, I came on here because our computers use a Wi-Fi internet connection and I was wondering how much of my web activity (history, cookies, temporary files, etc) he could see from my laptop if his computer was a desktop downstairs. He's very tech-savvy (a former IT guy) and I don't want him snooping through my personal records.
View 2 Replies View RelatedWe are a non-profit organization that is heavily reliant on interns that use their own laptops a lot here. My concern is they come in and connect to our wireless network with no supervision or anything else. I am worried they will introduce a virus, trojan, or something to our network. What the best way to keep them from introducing unwanted malware from a thumb drive, virus in email, or something to that effect shy of standing over them while they install and run an antivirus software?
View 7 Replies View RelatedI have problem with the Lan-to-Lan VPN tunnel.the VPN working fines since 9 months ago without any problems.Suddenly got the problem!,In last two days we faced problem the VPN down.in first time the problem in phase-2.. but after that in phase-1... in latest no data packet received to their side.
View 1 Replies View RelatedI am looking for some resources on what steps would be involved in configuring a Cisco ASA 5500 when obtaining a new ISP. Since our static IP will be changing with the new ISP, just need to know what configurations changes will need to take place. We currently have a working config with DSL, but are switching to cable. We are using a DMZ configuration, and are going to try using ASDM first since that should be easier
View 3 Replies View RelatedThere are three Win 7 laptops on the LAN trying to connect to the ASA5500 Firewall. They generate a Severity Level 3 alert and try the same port three times then move to the next numerical port and try that three times. Is this a malicious Hack.
View 5 Replies View Relatedcan i change my nat type from type 3 to type 1
View 19 Replies View RelatedI have been trying to get into one website (url)The world's best online marketplace, List free Classifieds,buy and sell - auction,post a job and get hire from over 1 million top professionals. | Wanaifieds.com and I can't get into the site from my home I can get into the site everywhere else but here I called the service provider and their telling me it's not them they don't block website and the IP is not stationary so their nothing wrong with their end I called the hosting company of the website and they told me they don't block any IP's I don't know what to do I do remember when it was working about 4 days ago I tried something o the site and I messed up and I clicked back instead of putting my password a little box poped up and said something about a certificate or something but I just clicked off and when I tried to get back on the site.
View 6 Replies View RelatedI'm working with Cisco ASDM 6.1 for pix. I want some of ip addresses are not shunned thus provide a list of addresses which should not be shunned in threat detection, but some of ip addresses are shunned yet.
View 1 Replies View RelatedI want to block 10.0.0.1 and 192.168.1.1 but my router says invalid domain so if will the guess network be able to go to page 10.0.0.1 and 192.168.1.1 even though I don't block it? I have a bypass account but don't want anyone else to access 10.0.0.1 and 192.168.1.1. Also can you tell me some proxy sites I can block?
View 11 Replies View RelatedWindows firewall settings cannot be displayed because the associated service is not running
View 4 Replies View RelatedI'm not sure how I turn off my firewall
View 4 Replies View RelatedFinding the difference nms and SIEM. But I couldn't find until now.
View 3 Replies View Related