Sharing :: Unable To Obtain IP Address On Local Area Connection?
Nov 5, 2012
I am trying to connect my WDTV Live to my desktop PC, and I connect to the net through a wireless connection to my router. Because its in the other room, I can't connect my WDTV Live to the router without running cable along the floor. Having said that, its not far away from my desktop PC, so I'm trying to connect them directly via cable. The problem is that my WD keeps telling me that it can't obtain an IP address and I don't know how to fix it or what values to put in.I've tried power cycling, manually setting an IP address (192.168.0.5), using different cables, all with no success[CODE]
View 1 Replies
ADVERTISEMENT
Aug 3, 2011
The link to Local area connection on the PC i am working on is no longer showing under Network and Sharing center. However the connection is up and I can access the internet. If I do an ipconfig /all I see the adapter setting as I set them. In device manager the device is working properly. I checked the BIOS and the NIC is enabled
View 4 Replies
View Related
Jul 2, 2012
howdy,im having trouble with my LAC.it just keeps identifying.i have tried everything,uninstall/reinstall, netsh winsock reset,netsh int ip reset,disable/enable.windows diagnostics comes back with invalid ip address,and modem hardware failure.device manager lists the network adapter as working,yet it doesn't here's my ipconfig[CODE]
View 5 Replies
View Related
May 12, 2012
I had just restarted my computer last night, and may have ended a process on the task manager that might have caused my internet to cease working and this error message to appear. Ive tried resetting the modem/router, resetting winsock and tcp ip whatnot in the command prompt?
View 5 Replies
View Related
Sep 16, 2011
i m not about to convinced what above are mentioned coz. i am having same problem (tried already above given tricks but noway to geting intenet access) is anbody there to reply from this tech center or simply this i called tech center without tech people..
View 1 Replies
View Related
Feb 7, 2011
I have a netgear wireless router, not sure on the model but can find out if required. My xbox360 is hard wired to the router and my Laptop is connected wirelessly to the router using the internal wireless connection on the laptop. The other half has a laptop too, for some reason her will not connect wirelessly, just gets stuck on a constant loop of ''aquiring ip address'' and does not get past this point. Laptop works if hard wired to the router. how do i get ip address to assign.
View 1 Replies
View Related
Aug 28, 2012
I have a Lexmark Professional X7675 that will not connect to my wireless network saying "unable to obtain IP address". This printer was previously connected to the wireless network with no issues. I did a reinstall on my computer and a reset of the printer network settings but still it will not connect to the wireless. The SSID and the WPA are both correct.
View 1 Replies
View Related
Dec 14, 2012
I bought a Linksys WAP610N today, i placed it so i could get a signal where i can't normally.
The thing is i configured it correctly, well at least i think, i can see it on my wireless network, with a good signal, but on my Android tablet (Google Nexus 7), it can't get past the "Obtaining IP address".
I called the technical support, the person there tried to assist me for about 1 hour, we tried different settings, we upgraded firmware from 1.0.01 to 1.0.04, but it didn't worked. Now he said someone will call me tomorrow during the afternoon.
My router isn't Linksys, it's a Netgear, i don't have wireless problem when i connect my tablets or any other wireless device on it, it's just that i bought this WAP610N to have the signal in my bedroom, where i don't get any signal normally.
View 7 Replies
View Related
Dec 27, 2011
I have a Dell desktop with Windows XP Home Edition. I recently restored the computer to factory settings and when I tried connecting to the internet the Local Area Connection wasn't showing in My Network Places. I have been searching through other forums and tried the things that they suggested but nothing worked. I am trying to connect to an AT&T U-verse 2Wire router through a wired connection. I tried connecting both wirelessly and wired to another computer and everything worked fine. I checked the Device Manager and there is an ! mark next to the Ethernet Controller. The properties say that the drivers for that device aren't installed. And of course I can't install them since I can't access the internet. Other forums suggested that I check the network adapters option in Device Manager but that isn't available in the device manager.
View 3 Replies
View Related
Feb 6, 2012
I'm trying to connect my Xbox 360 to Live by bridging my computer's wireless connection. I've done this before for a friend in a different city and it worked fine, and I felt very proud of myself for doing so. However when I try to connect here, the modem won't assign my Xbox an IP address. I've been into ipconfig/all and tried to manually assign the same IP address to the Xbox but to no avail. Same deal with the alternate MAC address option.
To speed things along here's the readout from my ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSamsung>ipconfig/all
[Code].....
View 2 Replies
View Related
Dec 7, 2011
My error message states that "Windows could not finish repairing the problem because the following action cannot be completed: Registering with DNS".I have no internet connection on my HP PC, which is why I am typing this on my laptop.On the HP I am running windows xp with sp3.I connect to a cable modem provide by Time Warner.This problem started yesterday, so I have been utilizing both computers with one internet connection, or plugging and unplugging the cat5 cable.I have run Microsoft Essential Full scan, as well as Malwarebytes's Anti-malware.Now I ran both of those in Safe mode, and picked up no bugs. I have Avast as my antivirus software, and the message I receive on that is that "Avast will not be able tp protect mail/news (error 10050). I am unable to turn on the web shields for Avast.I have manually entered the IP addresses into my HP from my laptop, all the way thru DNS servers.It still won't connect.I tried using the Internet explorer diagnostic tool, and it came back and said that I have a winsock issue.
View 14 Replies
View Related
Oct 3, 2011
1. Internet works ok, everything is fine, but then it stops working for no reason.
2. I open Network and Sharing Center, and do diagnostics. They come up with result: "the default gateway is not available". Nothing works. But Local Area Connection and Network Controller are both enabled.
3. I have to restart computer for the internet to work again. However, it doesn't restart: it hangs forever in "shutting down" screen, and nothing happens. Probably because computer is still trying to connect to the internet (?)
4. After forced restart, internet doesn't work, but if I run diagnostics again, they come up with result: "The Local Area Connection adapter is disabled", and fixes it automatically. Internet works then.
View 9 Replies
View Related
Jan 30, 2013
My internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place before the move EVERYTHING worked fine, On my xbox the display says:Network adapter - wired IP address - failed?i'm running windows xp sp 2?
View 1 Replies
View Related
Sep 26, 2011
I got a new CPU but after 3-4 months I use it, my local area connection is gone.It cannot detect the internet. I use Acer Aspire M1800. OS is Vista.Also, I get error 0x800706ba
View 14 Replies
View Related
Aug 1, 2011
I wasn't able to connect to my modem's Ethernet for a month, before that, i was able to use my Ethernet when connected to PC, but when i threw it away, i tried many time to connect to my modem' Ethernet but all the attempts were a failier.......Is it because of the cable that i must connect or is it the com or modem that is wrong?
View 1 Replies
View Related
Aug 26, 2011
I have xp pro sp3 i also connect thru fios since i restarted my computer last evening i can't connect this computer was put together for me so no original disks under network connections there is no lan connection can't use system restore tried ipconfig but says internal error and thats all when i try safe mode i see all of the network adapters but i don't see it in regular boot.
View 3 Replies
View Related
Feb 7, 2013
I am having this same issue. Except under Network Adapters, I don't have a yellow question mark. I have a amd Athlon(tm) 64x2 dual core processor and operate with windows XP professional service pack 2. my other computer (this pc im using) i have no problem with the connection I can to the the Internet
View 2 Replies
View Related
Mar 12, 2012
-No hardware profiles on "change adapter setting."-Network Adapter isn't shown in Device Manager.-Reinstalled windows 7 and problem still persist.
View 4 Replies
View Related
Oct 9, 2011
how to increase local area conection speed 10mbps to 100mbps?
View 2 Replies
View Related
Feb 1, 2011
My internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place so happened before the move EVERYTHING worked fine On my xbox the display says:Network adapter - wired IP address - failed Im sooo so confused with what to do now, anyone got any suggestions?
View 20 Replies
View Related
Aug 9, 2011
My laptop (win7) can connect to wireless, but not Local Area Connection.This is the capture of my device manager, it reported that the driver of ip6 failure.but I do not think ip6 relates.I tried configuring a static IP address, reinstalling network driver, or disabling and enabling network cards.
View 11 Replies
View Related
Sep 29, 2012
I've tried most solutions online that I can find with similar problems, but to no avail. I'm using Windows 7 (64 bit), by the way.
Here's a copy of my "ipconfig /all" :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code].....
View 16 Replies
View Related
Aug 22, 2011
I got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies
View Related
May 4, 2012
I cant find the local area connection in (change adapter settings).
View 1 Replies
View Related
Jan 12, 2012
how to show a local area connection icon if its disappear, and if its say as a past item in customize notification
View 1 Replies
View Related
Jan 31, 2011
My computer is not connected to the local area connection.even though the network cable is plugin.
View 1 Replies
View Related
Jul 7, 2012
I've been trying to set my IP to a static IP so I can host servers for a few different games and every time I change the IPV4 settings my internet stops working and when I troubleshoot it says "DHCP Not enabled for local area connection.".
View 5 Replies
View Related
Jul 23, 2011
I am trying to set up a wifi hotspot with my wireless adaptor. The connection between my ipod and the wireless adaptor in my computer seems to be working fine, but it doesn't connect further to the local area connection (ethernet).I tried to bridge the two networks but it doesn't work I get the error message "An unexpected error occurred while configuring the network bridge"[CODE]
View 4 Replies
View Related
Jan 4, 2011
MY laptop has a X in local area connection
View 2 Replies
View Related
Sep 1, 2011
I am using an ethernet cable to connect my desktop to a Linksys router but I am getting the following message "Local Area Connection" doesn't have a valid ip configuration.I have connected to other routers so I do not believe that the card is at fault.So far I have tried the following:
Swapping ethernet cables
Connecting to router
connecting to modem
power cycling router/modem/computer
downloading new driver
[code]....
View 19 Replies
View Related
May 12, 2011
my computer is custom made and it has been running just fine until recently. Usually when turn on my computer and login, my computer is connect to the internet. However recently I have not been able to connect with the local area connection and i'm currently on wireless connection. When i'm not using wireless my internet doesn't connect and I can't check my router by typing 192.168.1.1. I have a Linksys WRT54G and i'm using Vista SP2. I don't like using wireless at all and I want my connection to go back to normal[CODE]
View 9 Replies
View Related
Oct 5, 2012
I decided to connect my PC to the router VIA Ethernet cable because I got this really long ethernet cable and the router is pretty far so the signal is weak and I want to fix that, so It used to work before until I formatted my PC, now when I go into the internet drivers I do not see any Local Area Connection driver that I can enable.
View 11 Replies
View Related
Oct 1, 2012
I recently hooked my computer back up after moving and the Internet is not working. After going through the troubleshooting steps it gives the message local area connection does not have valid ip configuration. I have a net gear router and the wifi works fine on my phone and laptop.
View 1 Replies
View Related
