All is functioning but I can't connect to my roommates' wireless router.BUT I am able to connect to my neighbors' unsecured network without a problem. I also have a laptop that connects without a problem to it. The network is secured and I am definitely providing the correct network key/password. I compared the network settings on my desktop with the ones on my laptop and its the same.
View 1 RepliesHow can I receive the Internet of my neighbors internet with a wireless router and how far will it Carry?
View 1 Replies View RelatedWe use our internet to watch Netflix. We have had no problems until recently, I called the satellite Internet company(which is a local co.) they told me my router was going out. I bought a new one, problem solved! Right?!? WRONG my husband told me my neighbor just got Internet and has been playing Xbox everyday which coincidently is between the 5:30pm to 10ish pm we have been having issues with our router. What can we do to fix this? Do I have to buy a bigger router? He is not stealing off mine because it is password protected that was changed when new router was setup and programmed. I have been running of a Cisco Linksys E2500 advanced dual band n router. The router is in the same room as the TV accessing it, which we previously had no issue connecting anywhere in the house or garage.
View 1 Replies View RelatedSometimes my wireless connection goes away.It just started doing this the last 2 months. I have to get next to my router in order for it to come back. My name will be in the list and so is my neighbors.
View 2 Replies View RelatedBought a new laptop and brought it home and got it hooked up to my wife's wireless router. Worked fine then went away for two weeks and came back and w/not connect unless I hooked into the DLink router. Took it back to where I bought it and it connected to their wireless network just like that!
View 1 Replies View RelatedI have a neighbor, whom I barely know, (don't know his name even) ask if I would be willing to give him the number off of my modem so he can cannot wireless to my internet. I believe that is a bad idea. For one I don't know him but if it was possible and I did that, would he be able to access my account? or start more trouble? He at first said If I give him the numbers off of my router but then I stopped him because I have a modem not a router. So I would never let him but was curious if someone can tap into a signal of mine from a laptop next door to me using wireless signal? And if so can that person see all of my stuff? Would my computer and I be at risk?
View 5 Replies View RelatedI have a wireless PC laptop and a router that works fine. When I change rooms, there's competition from my neighbor's router and I want to remove it. When I "view wireless networks" I see their connection. When I go to "change the order of preferred networks" (hoping to delete it from there) it doesn't show up. If I go to "change advanced settings" I end up in the same place not showing the neighbor's wireless.
View 4 Replies View RelatedI am working at a client site today on a routing issue. I am currently working on an issue where a 3750 switch running EIGRP will not update its neighbor router when a network statement is added to the eigrp instance.The neighbor is a 3825 router.
Both the switch and the router have a common network which is 192.168.36.0/24.
Both the switch and the router are in a neighbor adjacency.
Both boxes have "no auto-summ" in the routing configuration instance.
I can run debugs on both routers (debug eigrp packets) and then I can watch queries and updates when I issue "auto-summ" or "no auto-summ". Also I see a "graceful restart" for the peers when this is done.I had an expectation that when I added the network (this is just an arbitrary network for testing, which is 172.16.69.0/24). I wanted to watch this network being sent in an update to the neighbor router.When I add the above mentioned network, there are no updates packets sent from the 3750 to the 3845. I have not had success to this point trying to resolve. I have followed the Cisco document "Troubleshooting EIGRP Flow Chart", but have exhausted all it has to offer and now it is at the point where it is telling me to contact TAC.
HP Pavilion dv6000 won't connect to my home wireless EDiAMAX BR-6204wg router via wireless. The HP will connect wireless in other locals and is working with a LAN connection to same router. This is our daughter's machine with Vista and we have trouble finding our way around in it. [code]
View 14 Replies View Relatedi have switch 2960 POE connected to access point WiFi Cisco when we connect the AP you can see it in the neighbor after 2 minute all AP disappear?
View 1 Replies View RelatedI've just signed up to a local Irish Internet provider and was supplied with a Cisco router EPC3925. Wireless is working fine for laptop and iPad. However I cannot share my iTunes library with Apple TV. I connected the Ethernet cable and it worked perfectly. However as soon as I disconnect, so too does the home sharing. I've disabled windows firewall and completely uninstalled macafee firewall. Im using windows vista and have the latest version of iTunes installed.
View 1 Replies View RelatedI recently installed a new router - WRTP54G . I used to have our 2 machines on a home network. However, that is all gone now. When I open My Network Places on my pc, nothing at all appears. On the other pc only the shared folders on that pc appears. I've tried running the network wizard several times and to no avail. I've checked the permissions and everything else I can think of, but it still doesn't work. I believe it is probably something simple to fix, like checking the right box, but I haven't found it yet. Both machines are running XP Home and I have an external drive attached to my pc. Everything worked fine till the installation of this new router. Should I just create a new network? Would that just be easier? One more thing, I got the error that says Home is not accessible. You might not have permission to use this network resource. Contact admin of this server to find out if you have access permission. The network path was not found. Of course, I am the admin.
View 9 Replies View RelatedSo I have a Netgear N600 WNDR3700 wireless router setup at home, and it works great for wireless, but when I plug in my desktop with CAT6 Ethernet cable to the router (didn't bother putting a wifi card in my desktop) for some reason it won't connect to the internet. I know the cable works because I've used it in the past, but for some reason I can't get it to work with my Netgear router.
View 7 Replies View RelatedI am unable to connect my Ipad3 to my home network (WRT160N router). It has been working for the last 8 months, and stopped working after I installed Direct TV App on Ipad..It detects the network, but not accepts the PW.... I have multiple wireless devicess connected to my network without any problems..The funny thing is that my neighbor brings his ipad to my house and he is able to connect..My ipad connects to any other network...just not my home network.. I contacted Apple who spend hours with me on the phone and suggested doing a full reset on the ipad, but still did not solve the problem..I called and already paid for linksys support ($62.95) who spend hours with me on the phone, but suggesting: "maybe you need to buy another router"...REALLY!!!! Again, I have 3 Smart TVs, Xbox360, and Wii, that are connected to the network just fine .even my neibor comes with his Ipad3 and connects to my network just fine......and I can connect with my ipad to any other network without any problems... BTW, I have already removed the DirectTV app from the ipad....but I still cannot connect to my network..
View 2 Replies View RelatedI have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
View 9 Replies View Relatedthis might sound straight forward, but every other pc or console can find and connect to my router.This issue seems to happen about once every few months, sometimes it comes back by itself and reconnects completely fine.
There isn't a "user limit" on our router.Wireless adapter is dell wireless 1505 draft 802.11n wlan mini-card.
Have restarted PC and uninstalled and reinstalled the card.I tried to set the i.p address to static but it says "adapter disconnected" so won't allow me to edit any settings, despite it being able to find neighbour's wireless very easily.
I renamed my SSID to "CoolWifiName" so that it's not the router's generic name, but what if a neighbor in my building uses that same name and uses it as their SSID? Since I wouldn't know which is which, and I mistakenly try to type in my wifi password on their's, would they have access to my password and be able to capture it?
View 3 Replies View RelatedMy Wifi network has a wpa2 password that is a random string of characters and numbers and yet last month a rogue IP Address kept popping up on my DNS list. It has to be coming from my neighbor who's bedroom is about 15 feet away from my router. So unless someone is sitting out on my front lawn to do this then it must be him.I've been looking for software that will notify me when a connection my router is attempted and kudos if it also asks my permission first would be great.There are wifi packet sniffers out there like Cain&Abel, Airsnort, that sort of thing but I am not quite savvy enough nor do I want to turn this into a complicated hobby but just need a basic warningin case something gets past my passwords again
View 3 Replies View RelatedI have been having problems forever connecting to internet at my apartment. My roommate has a Belkin router, and him and my other roommate have no problems connecting. I used to be able to get on it fine, however now I either get "connection unsuccessful" or "unidentified...(Belkin.3BC3) - Limited Connectivity" when I try to connect. Our landlord provides the internet, and we have the base router(not wireless) in our basement. But even when plugging into the wall with a ethernet chord I get local only. This is the only place I have any internet problems, anywhere else I can connect just fine.
View 2 Replies View RelatedI'm having problems with a linux box we're using as a VPN/IPtables firewall. The setup is such that we're sitting this thing behind a basic Comcast cable modem will all the pass through options set. The outside facing interface is set to DHCP and grabs an IP address from Comcast. Inside interface is statically set with the same being said for the CIPE interface. The inside interface works until we plug up the outside. When we plug up the outside interface, all network traffic to the box effectively shuts down and the /var/log/messages is flooded with "neighbor table overflow" messages. Sometimes, this takes a few seconds to appear, and when that happens I can track some traffic hitting the far side of the tunnel, I.E. it works for a few fleeting seconds.
View 6 Replies View RelatedMy friend has an internet connection and Wifi, it reaches my room but with poor signal, is there any way I can strengthen up the signal?
View 1 Replies View RelatedJust got myself a used but fully working MiTAC Mio 558 Digi-Walker POCKET PC.[UNow on the Pocket pc ive gone into Network settings, and its found my wireless signal,along with others in the street...but when i click on mine and put in my password key it just says "The Network Key you have entered is not correct,Please try again".I can assure you guys i am putting in the right network key/password for my router,i also have a laptop connected to my router and thats working and accepting the key but not my Pocket pc.My router is a Netgear wnr2000.
View 2 Replies View RelatedThe computer I am using won't connect any of the routers I've tried (one innoband and two sonicwall tz100's, all of which work with other computers), even though it does connect to the internet through the ethernet port. It is a Dell optiplex 980
View 1 Replies View RelatedFirst I'm sharing a network via bridging from my dads house. Everything works perfect. I'm using a router at my house with no problems. At his house he as a modem hooked to net gear router and the acer will not connect to internet via wifi. So I bring the thing up to my house and it connects fine via wifi. The acer will connect using a eithernet cable at his house but not wifi.
I was wondering if the acer is getting confused cause his router is hooked to a modem?I've tested and tryed everything under the sun and nothing seems to work.I know theres nothing wrong with the wifi software or hard ware in the acer cause it connects fine And surfs the web via wifi at my house but not at my dads.
just got a samsung galaxy s2 great phone but cannot connect to home network via netgear router, i can see the network but if wont connect. i can connect the my work one no problem via wep key.i have tryed every thing do still no go
View 13 Replies View RelatedAs the title says I was using the internet one evening, turned it off my laptop which is an Acer 5332, the next day turn it on only to find I am disconnected from the home router and can't connect to it. My Ipad is able to connect to it without a problemI tried connecting to a friends router without a problem. I uninstalled the network adapter and restarted my pc only to find that it couldn't successfully install upon restart however I'm still able to connect to other routers except the one I want
View 15 Replies View RelatedI'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 usb dongle directly into my computer it works perfectly and I got the router to work using a ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port. I get a connection at 40% and 100 bytes are sent and some are received but the connection drops. Is it a problem with the connection? I will upload a image.
View 3 Replies View Relatedmy newer laptop that I have only had for a few months will not by any means connect to my router at home. However, it does connect to pretty much any other router wherever we go. And there kicker is, the desktop I am on now, my phone, and pretty much everything else, WILL connect to my router (both n and g wireless devices). So, here are the details: My laptop is an HP Pavilion G Series, running Windows 7. My router is an N600 Wireless Dual Band Gigabit Router (WNDR3700). The computer I am currently using (and do the router config on) is running Windows 7 as well. The router has both a g and n setup (WPA2-PSK [AES] pass). Passwords for both n and g are the same, so there is never any confusion.
View 2 Replies View RelatedMy phone won't connect to my Belkin router (F5D7230-4) thru the wifi connection. It previously had connected fine, but I'd reset the router today & changed the password. I'm able to connect with no problems (thru wifi or regular connection) on my pc. I went to my Belkin router page and have looked at my MAC settings (only option it gives is to clone, which I tried), I've also tried changing the password....my phone also gave me the option of hitting the WPS button on my router within 2 minutes, which I did, but it would not configure automatically as it was supposed to.
View 1 Replies View RelatedWe have an existing network with OSPF configured between 3750's (DR and BDR) this is working fine.But the Nexus 7k which has been configured to run OSPF, won't established the adj. It is in the same network/subnet.The MTU is 1500.
View 5 Replies View RelatedI have 2 ASR routers running PIM-SM between them on several sub interfaces.PIM hello interval configured for 200ms.Sometimes PIM neighbors between ASR routers going down.
Reboot for each router not resolving the problem.Deleting ip pim sparse-mode and configuring it again on one of the ASR routers resolves the problem.
I didn't find any related bug.The version is asr1000rp1-adventerprisek9.03.06.01.S.152-2.S1.bin
We are about to a large amount of access points from access ports to trunks. Is there a report function in NCS that will give me a list of the APs and their CDP neighbor? I am able to view the information under "monitor/devices/access points" but I can't export that information to a useable format.
When I get the list the next step will be to create a configuration task in LMS 4.2 to configure the switch ports.
I have a 3825 running c3825-advipservicesk9-mz.124-24.T8. It is configured as an eigrp stub advertising only its connected and static routes. There are three WAN connections using a metro ethernet service. Two are data, one for voice traffic. The primary data connections run to two WAN edge ASR1002 routers.
The primary data connection (Gi0/1.943) is 20 Megs, the secondary data connection (Gi0/1.944) is only 15 Megs. Before the secondary connection was in place I only had routes to our backbone via Gi0/1.943 and everything was working great. Some time after the secondary data connection was turned up the routes to the backbone through Gi0/1.943 disappeared from the eigrp topology table causing all data traffic to flow through the less desirable secondary Gi0/1.944 interface to our backbone.
There is a good eigrp neighbor relationship between the 3825 and the ASR connected to Gi0/1.943, but if I show ip protocols it does not list the ASR as a data source. I know that the ASR is advertising its routes because I can see the updates coming from it if I debug ip eigrp. For some reason they are just not being added to the topology table by the 3825, not even as a feasible successor.
I have shut/no shut the interface multiple times at both ends during troubleshooting and I also reloaded and upgraded the code on the 3825 from 12.4(24)T to 12.4(24)T8. We also contacted the metro ethernet carrier to see if they had a policy that could potentially be blocking the traffic (no). My colleagues and I are just not seeing any feasible reason why these routes are not being added.