Cisco :: 5800 - Can't Ping Wireless Controller After Firmware Update To 7.0.240
Mar 7, 2013
I can figure out why I cant ping controller 10.1.99.100. Here is my controller config. It is connect to H3C 5800 switch. I have the switch config below as well. The port on the switch is on Native Vlan 1 untagged.
(Cisco Controller) show>interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
-------------------------------- ---- -------- --------------- ------- ------ -----
ap-manager 1 untagged 10.1.99.101 Static Yes No
[Code]....
View 30 Replies
ADVERTISEMENT
Oct 4, 2009
I have this piece at my home and just realized today that there is a new firmware available on the cisco web page. It has made the device more stable, but the most noticeable improvement is in the UI. Previously it was a linksys for business UI that was pretty much exactly like the consumer products. After the upgrade it is now a Cisco small business UI. I think that this will make the resellers take the products more seriously as a small business piece rather than an upgraded residential product.
View 2 Replies
View Related
Dec 20, 2010
I have a working WAP2000 that won't accept the 2.0.3.4 upgrade file. After selecting the file and pressing the UPDATE button, I receive the following error:
This webpage is not available.The webpage at URL might be temporarily down or it may have moved permanently to a new web address.
View 5 Replies
View Related
Mar 17, 2013
I just purchased a RV180W wireless router. It came with 1.0.0.30 firmware revision installed.
I have tried from multiple computers and multiple browsers to update the firmware on this unit, and I always end up with the same result.
"Firmware file is invalid or corrupted"
I have also downloaded the images (1.0.1.9 and 1.0.2.6) from multiple machines all with the same result.
View 2 Replies
View Related
May 5, 2013
i've upgraded our WLC 5508 from 7.0.220 to 7.2.115.1.For our guest WLAN we use web authentication with customized startpage, no login error page and no logout page. The customized login page is displayed correctly. After successful authentication the browser is forwarded to the default CISCO login page "login.html". No further autentication is possible, also no internet access.Reload the customized webauth bundle to the controller didn't change anything. Is there a change in the HTML/Java code of this controller version? I didn't find any hint in the release notes. Or do I need the newer web authentication bundle with version 1.0.2?
View 6 Replies
View Related
Jun 17, 2012
One of our customers wants to update the firmware of a 5508 wlc, but always gets the following error message: Error Message %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be corrupt.but the same image works fine on another 5508. The update was downloaded via a smartnet for the wlc, on which the update works fine. does the customer has to download another image for the second controller, or should the image work on both wlc?
View 1 Replies
View Related
Mar 8, 2013
I recently upgraded to firmware version 7.1.91.0 on my 5508 controllers to allow support for 3600 WAPs and WCS. We have recently run into bug CSCua29504 which prevents Windows 8 devices from joining my wireless network due to a Management Frame Protection issue.
Firmware updates have been released for 7.0,7.2,7.3 and 7.4 trains to resolve the fault, however there hasn't been a release for 7.1. Any update for the 7.1 firmware to address bug ID CSCua29504?
View 2 Replies
View Related
Sep 3, 2012
I would like to update the firmware of this AP but I'm having problems. The commands seems to be not complete
APa493.4c46.8e83#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC (code)
View 2 Replies
View Related
Nov 22, 2011
My router's last update was: v1.50.6,Feb. 17, 2006 . I use the router at home with no problems (we had a desktop and a laptop using it; now just the laptop). I purchased a Kindle Fire last week and it works fine at work, at restaurants, etc. but not at home. Some of the KF discussions I've been following suggest updating the router's firmware so the KF will recognize and connect to it. I contacted Cisco and was told that no firmware updates are available for my router since it is out of warranty. I contacted Amazon and was told that the problem was in my router.
View 4 Replies
View Related
Sep 30, 2010
I am trying tu update the firnmware of a HWIC 3G-GSM within an 1841. What is the correct firmware?
I have tried
K2_0_7_35 and K1_0_2_18 from [URL]
[Code]......
View 6 Replies
View Related
Sep 23, 2010
I recently upgraded the firmware from 2.0.2.1 to 2.0.3.3 and when the router rebooted the interface was missing many items. On the basic setup page the boxes were missing to set the local ip address, subnet mask and anything below that. On the Wireless Security page the security mode box was half it's size and did not have any options in it. The wireless isolation wpa algorithm, preshared key and key renewal boxes were missing too. I rebooted the router and still got the same thing. I was able to get into administration and reset to the factory default. Once the router rebooted I was unable to get into the interface at all. It wouldn't come up at all. The power and light were blinking but I was unable to connect to it. I tried to connect with 192.168.1.245 and the one I had set manually but no luck with either. I was able send back the router for an exchange with Cisco. I received the new one today. It started up and everything worked great. I decided to try the firmware upgrade again. I went from the firmware version that was on there(I didn't right down) to 2.0.2.1 and the upgrade worked as the other 3 I have. I than tried the 2.0.3.3 upgrade and I got the same thing as the other router I sent back. I have 3 other routers in place that I will not be upgrading at this point. I should not have tried the upgrade again on the one today but being a bank the examiners like everything up to date and it's part of the monthly check.
View 2 Replies
View Related
Jun 11, 2012
I'm not a computer whiz and need exact instructions for how to update the firmware on netgear n750 wndr4000 wireless router. I called netgear and they wouldn't I don't want to spend another 100+ on a router.
View 3 Replies
View Related
Mar 17, 2009
I am trying to update my WRT110 which has 1.0.04 firmware on it right now but when i try to update it toVer.1.0.05 all i get is this message.... i dont know what to do i never had a problem updating my older router's befor i had this one this is the first time im updating this one i tryed updating it on IE 8 RC1 & also Safari 4 but i get the same message . I've also tryed saving the firmware file in it's own folder still no luck try updating on my xp desktop & my laptop with vista with same message? is it a problem with linksys with the file on there website maybe?
View 9 Replies
View Related
Mar 15, 2013
Region : Argentina
Model : TD-W8968
Hardware Version : V1
Region : UnitedKingdom
Firmware Version : 101029
ISP : TalkTalk
I have version 1.1 and d/l'd firmware 111125. The upgrade ran successfully to 100% and then I got the login screen again. However after checking, then restarting to factory default the version displayed was still the old one
View 3 Replies
View Related
Jan 1, 2012
I go to the support page for the WRT54G routers. I set the version number to version 2 and there is no firmware file to download. For every other version there is a firmware file to download but not for version 2. Where can I get the latest firmware for my router.
View 1 Replies
View Related
Sep 22, 2011
I found this router still in box and am now using it. I want to update the firmware because i am having issues with it. it has what i assume is the original Firmware 1.00.1. The downloads for this router are no longer available. Why?
View 1 Replies
View Related
Apr 4, 2013
an EA6500 router that has intermmitent connectivity issues. Went into the configuration page and saw he was a couple versions behind on firmware. Used the online update option, firmware downloaded and then indicated that router would reboot. Did not power off router or leave the configuration web page. Watched light go out on router and come back on, but the spinning wait icon never went away after 5 minutes. Powered off and on and was back at the same point with the old firmware still. Downloaded the firmware to local drive and applied from local file, but same results. Waited 10 minutes this time. Surely it doesn't take more than 10 minutes for the router to reboot itself from a firmware flash?
Gave up on trying to update firmware and configured wifi settings. Left friend's house and then got a message about 15 minutes later that the router had locked up again. If he pulls power for 2 minutes it will then work for another short period of time.
Is there anything that can be done to try and restore normal operation to this particular router, or are these all signs of a hardware failure and the unit should just be replaced?
View 8 Replies
View Related
Jul 10, 2009
Just got a WRT120N and went online to get the most recent firmware and when i performed the upgrade it's gets about 3/4 of the way completed before it just stalls and start screen blinking like it's caught up or something. I using a modem, wrt120n router connection with a Brand New Sony Vaio laptop. I was able to upgrade my old WRT54G V5 router but can't seem to get the new router to update.
View 7 Replies
View Related
Apr 15, 2012
I've got an older SRX200 that is starting to "disconnect" frequently (loss of wireless connectivity). I've gone to the Linksys website to download a firmware update, as a potential fix, but the website says no firmware is available. The current version I'm using is 1.01.18.
View 1 Replies
View Related
Mar 6, 2013
Region : Australia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
Like many others with the W8968 Modem Router we are experiencing sudden disconnections from the internet every 1/2/3 hours with the only way to cure the problem is to hard reset the modem router. For your tech staff on the phone to say 'I'll just have to do this" is completely unacceptable.I have used 3 other modem routers with the exact same setup flawlessly with no disconnections so it's 110% the modem routers problem.I'm pushing this message for you, TP-Link, to release a new firmware version to fix this problem.
I also believe there are other problems incorporating port forwarding,etc aside from this major flaw.I used to believe TP-Link was a trusted and great company but after my experience I'll be thinking otherwise.
View 10 Replies
View Related
Dec 13, 2012
Nom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560
View 1 Replies
View Related
May 2, 2012
I have a Linksys E1000 with Firmware Version: 2.1.02 I am having a very hard time searching to see if there is a newer Firmware Version out for this model. If there is any new Firmware update?
View 4 Replies
View Related
Oct 2, 2011
I am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.
View 4 Replies
View Related
Jan 17, 2012
Why is there no update for the WRT54GX2 firmware?
View 1 Replies
View Related
Sep 30, 2012
Recently, the wrt310nv2-cc mostly got lost in wireless connection, so I would like to update the firmware, but I download the latest firmware, it could not flashed, which version should I use?
View 6 Replies
View Related
Feb 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Do not we deserve, (their customers), at least bothered to tell us?
View 14 Replies
View Related
Feb 9, 2012
I have WRT54GCv3 wireless router... i want to update firmware but i dont find any firmare for my router version?
View 1 Replies
View Related
Jan 25, 2012
I upgraded my WRT54G ver. 2 with the latest linksys firmware update (4.30.5). My previous firmware was 2. something. After the process i lost internet connection and i can't no longer access my router. I tried to reset the router to factory defaults by pressing the reset button for 10 seconds, but nothing happened. I also turned everything off and on again, but still nothing happened.
View 1 Replies
View Related
Jul 18, 2011
I have recently acquired one of these routers. I thought, being a Cisco product, it would be the bee's knees. It is not. After finally getting the network set up - no mean feat, although I do not claim any expertise, but had to resort to some other network management software to finally get it all running - the router drops either the WAN connection or the wireless connection many times a day. The laptops often show as being connected to the network/router, but are unable to access either the internet, or the router via the browser. Re-booting the router is the fix, but, hey, I can achieve that sort of performance with any old $20 router - none of my old Net gear routers was this troublesome.
The permanent fix would seem to be a firmware upgrade, but guess what? The only options available under the "Administration" tab are time setting and switch settings - no firmware upgrade. The supplied firmware is 1.01.09(001) Apr 7 2010. Why these products are supplied, as new, without the latest firmware installed beats me, but there you go.
View 4 Replies
View Related
Jul 16, 2007
Is there any firmware update for this product? I'm not hable to find it... Product: WRT54GC Version 2.0 (wwith external anthena)
View 9 Replies
View Related
Sep 28, 2011
I've tried downloading the binary file and on both a mac and pc and it's not working. On the mac it looks like a normal zip file but when I click to "unzip" it it just creates another zip file. When I download it on a pc it doesn't even look like a zip it's just a blank white square. Both computers have always downloaded zips fine, so I'm thinking it maybe is a problem with the file?
View 3 Replies
View Related
May 23, 2012
I recently updated the firmware in my WRT160N V3.Ever since, the wireless signal is intermittent.It worked all day yesterday, and now today it doesn't connect at all.I can't remember exactly the settings I used to have before updating the firmware, should have written them down.From looking at articles on this site, I have the following settings:
MTU Manual 1492
MAC Adress enabled
Network Mode: Mixed
Channel Width 20MHz
Channel: 11
[code].....
View 3 Replies
View Related
Jul 26, 2011
The firmware update will not download?
View 1 Replies
View Related
