Cisco AAA/Identity/Nac :: ACS5 - Replacement For IP Pools
Jan 26, 2013
I know ACS 5 lacks the IP Pools of earlier ACS versions. I'm looking at a 4 to 5 migration and was thinking of just configuring the IP Pools on the router ("ip pool local" etc) and sending back a RADIUS Cisco Attribute pair with the name of the pool. (Seemed like a neat fix, needs no extra kit, etc.)
I could have sworn that attribute pair existed... but I can't find it in ACS5! What's it's name?! Where is it!? Or have I gone mad!? (And, if I have gone mad, how would you go about fixing it?)
View 2 Replies
ADVERTISEMENT
Mar 19, 2012
How to configure the ACS5.0 radius for remote access VPN authentication.
And how could I implement the IP Pools for the VPN users.
View 4 Replies
View Related
Aug 28, 2012
I have an ACS 5.3 cluster, that is configured to use AD. There are a few wireless devices, and monitoring tools that do not have AD accounts. I would like to configure ACS to first check AD for the user authentication, and if that fails to roll over to the local (Internal Users) identity source where I can define these user accounts.
It seems that when the authentication hits the initial Identity Policy rule, it never moves onto the next one if the first fails.
Attached are screen shots that show how i'm configured for the test, i have a local user defined and I'm trying to log into the firewalls.
- Identity Definition : Screen shot of the main ACS definition for the rule i'm testing that's not working
- Identity Rule 1 : The configuration of rule 1 that if it fails i need it to move onto rule 2.
- Log Output : Screen shot for one of the failed attempts from the ACS View Log server.
Reason I need to configure it this way is:
- Wireless users authenticate to wireless using AD user accounts. Some hand held scanners do not support that and will need to authenticate using the MAC address.
- Authentication to Network devices for managment uses AD accounts. We have some monitoring tools that do not have AD accounts, and will need to be able to log into Network devices to issue some commands (Examples: Cisco Prime LMS and NCS, Infoblox NetMRI).
View 4 Replies
View Related
Jul 30, 2010
I managed to connect acs5.1 to the AD , user's will be able to get authenticated against the AD when the state is shown "CONNECTED'. This will work ok for a day or so and goes into a 'DISCONNECTED' state , users will no more be able to authenticate . Is this a known error , or is this an error from the microsoft ws2k3 server side ?
View 3 Replies
View Related
Jun 19, 2012
For our client, we have two ACS 5.0 deployed in primary and secondary mode.Primary ACS is failed and we are going to replace the hardware.Problem is we dont have backup of primary ACS and have backup of only secondary ACS.Also there is certificate used for authentication of wireless users.In this case how we can proceed for for the restore.
If we promote secondary ACS to primary and join the New ACS as secondary,will the certificate also synchronised? or we need to create CSR and obtain the certificate for new ACS?
View 1 Replies
View Related
Jun 7, 2013
I have a clarification related with ACS 1121. Client needs a solution for ACS feature, instead of investing on ISE Base, is there any model exists as ACS appliance only. I believe ACS 1121 is going to be EOS and it says SNS 3415 is the replacement model .
What I am confused is , It is an ISE as well as ACS and there is separate licensing for ISE (as base and advanced). What should i do , if i need to select SNS 3415 as ACS appliance ? is it built in or should i need to add anything extra ?
View 3 Replies
View Related
Jun 10, 2013
I am trying to configure Fortigate firewall for device authentication through TACACS+ using Cisco ACS 5.2.
I was wondering if any one had an experience to worked on this scenario. I am looking for authorization command attibute to grant admin access.
View 1 Replies
View Related
Nov 29, 2011
I want to export the ACS local user's records.Then import to other ACS5.3 server.But the export file not the user's password record.I cannot import it well....
View 1 Replies
View Related
May 17, 2011
we are moving network devices (200+) authentication/authorization/accounting to new ACS5.2, is there any easy way to copy/sync all those AAA clients configuration to another ACS5.2 server? I don't need other configuration to be synced/copied to another ACS5.2 server
View 8 Replies
View Related
Aug 18, 2010
I'm trying to dynamically assign IP address for VPN users from AD (without IAS service). I know that there is a restriction that "Dial-in users are not supported by AD in ACS (note in "acsuserguide51") but Im not exacly sure what can and can't do with it. In "Authorization Profiles" in RADIUS Attributes tab I try to mannually add specific Attribute (Framed-IP-Address).
I have no problem (everything works just fine) with static address assignment in a way as below:
AD is already integrated with ACS and I've managed to download Directory attributes especially msRADIUSFramedIPAddress
When I change "Attribute Value" from static to dynamic type I see the option to select AD (but "Select" which should list all available attributes is empty)
I know that I can do it directly (ASA <-> AD attribute mapping) but I want ACS to do it
View 5 Replies
View Related
Oct 13, 2011
We have customer with implementation ACS5.2 in Windows environment. Now they want to implement IP phones in the network.
View 0 Replies
View Related
Jul 9, 2012
I am trying to secure changes to switches using ACS 5.3 and allowing our technicians to only change the vlan for user ports on the switches. How can I use regular expressions to filter out the 1/1/# ports so that those ports cannot be accessed in config mode? If I allow the following, it allows access to all interfaces with 'gi' in them.
View 1 Replies
View Related
Mar 3, 2011
I have everything working on a new 5.2 ACS but:I can only make a command set that permits things and denies all.I thought with the check box. Permit any command that is not in the table below" one could allow all and specifically deny commands.and that would allow the user to do all commands except for conf and set. But it doesn't seem to adminstratively block it, it allows them to still "conf" for instance.
Then it works as expected, it allows the commands that are permitted and denying all unspecified commands.I know I am in the right command set because the changes I make are reflected immediately.Can someone test the "Permit any command that is not in the table below' and tell me if it works? I can make it work with the unchecked box, sure, but it would be nice to get it to work.
View 3 Replies
View Related
Jun 11, 2012
I'm having trouble getting things working on a pair of ASA5510's using Cisco Secure ACS v5.1. We were previously using a much older version of ACS to these (and a lot of other) devices which worked OK for remote access for read/write use. Am in the process of migrating to the new ACS software and have got it working OK to everything (many Cisco switches and other IOS devices) except these ASA5510s.
I can get TACACS authenticating fine and am able to log on and go into enable mode. Any subsequent commands are then met with 'command authorization failure', including 'show run', 'conf t' and even 'exit'!
My ASA5510 config has not changed, other than to define the new AAA server, which leads me to think its something to do with how I have the ACS user profile set up. I have configured the ACS5.1 device administration Shell Profile to have the maximum privilege level (15) and the command set I'm using has the box checked 'permit any command that is not in the table below'.
View 7 Replies
View Related
Oct 3, 2011
We are trying to make a restore from the backup done on ACS version 5.1 to a new appliance running ACS5.2 Before doing it I found this note in Cisco ACS user guide:
Note: You cannot back up data from an earlier version of ACS and restore it to a later version. Backup and restore must be performed on the same version of ACS. If you need the data on a different version of the ACS, you can perform an upgrade after you restore the data. Refer to the Installation and Setup Guide for Cisco Secure Access Control System 5.1 for more information on upgrading ACS to later versions.
How should I understand it? This note has conflicting statements. We can't restore to a later version but if you need data on a different version of ACS you can perform an upgrade AFTER YOU RESTORE the data. Doesn't it mean that the restore will still work? How would I do the upgrade to version 5.2 or even version 5.3 that was announced to be released very soon? I didn't find anything on the software upgrade in ACS5.1 guide.
View 4 Replies
View Related
May 24, 2012
I am using ACS5.2 I want user to access the device with all necessary command like show run/ver/int/log… I try to set user privilege using Shell from 1 to 10 but show run doesn't work.
View 15 Replies
View Related
Aug 27, 2012
I configured an ip pool on VPN 3000 concetnrator. i wanted to an attribute to use on the nework access profile on the acs 5.3. i was advised to use pool name. However, we don't have pool name attribute on VPN concentrator. only, IP range and subnet mask. how do i refer an IP pool on VPN concentrator in ACS5.3? is there another attribute I can use on ACS5.3 to invoke a pool on CVPN3000, like ip range...?
View 2 Replies
View Related
Aug 8, 2011
My company requires each user dial-in must be a fixed IP; The old acs4 can,but I cannot find the same configration item in the ACS5.2
View 2 Replies
View Related
Nov 25, 2012
I had a problem about authentication use AD group member. Below webiside is the way I config on ACS.
[URL]
I'm using ACS 5.1.0.44 and this version has a bug , ACS cannot read AD group. I have to add it manually . After I change the access policy from Internal user to AD1. I can use anyone AD ID to pass authenticaiton. I finished all config from the website had same result.
I checked the access polices -- default device admin -- authorization , the new rules I created had no hit count. How can I make sure that I make a right config ?
View 2 Replies
View Related
Aug 2, 2011
We plan to use machine certificates on our notebooks with Windows Vista. Our authenticating server is Cisco ACS 5.1. To access the wireless network we want to use the machine certificate of the notebook and a verification of the corresponding computer account in the Active Directory. What authentication method is the best to check the machine certificate and if in the Active Directory exist the enabled corresponding computer account ? How to configure the ACS and the notebook to use it like described ?
View 1 Replies
View Related
Aug 14, 2012
I am using Cisco ACS5.3 to authenticate users (using radius) for a cisco ASA firewall for both WebVPN and IPSEC client connections. I have been able to do this successfully. However I need to be able to deply Cisco vendor specific attributes (VSA) for both IPSEC and WebVPN sessions using authorisation profiles. Ideally I don't want to have to combine the attributes required for both services in the same authorisation profile, as I will have to produce alot of different profiles for the different combinations.
The only way I can see that you could possibilly do this is by having service selection rules that can differentiate between WebVPN and IPSEC Radius authentication requests. I have experimented inbound VSA's without success. Is this possible?
View 1 Replies
View Related
Jan 16, 2012
Is it possible to create on ACS5 rule which will:
1. Try to authenticate user in external database1 (radius)
2. When external database1 returns FAIL (because of bad password) ACS5 should try to authenticate user in another external database2 (radius)
View 5 Replies
View Related
May 7, 2013
Our ACS appliance (Cisco 1113) has died and it is not cost effective to get it replaced as it will only be used until the end of this year.Is it possible to get the tacacs software to install on a Windows server? How do I go about sourcing the software as the original documentation is no longer available? Will the fact that I have a defunct appliance be sufficient proof to get a copy of the software? We are currently running v4.1
View 1 Replies
View Related
Jul 11, 2012
Why ACS5.3 requires 500GB datastore? what for? do we still need this when we use external database? am in the process of migrating from ACS4.2 to 5.3.
View 49 Replies
View Related
May 30, 2011
Our customer has the business needs to authenticate remote users against AD with empty password. I've seen ACS5.1 release note where mentioned about resolved issue: #CSCte72751 #ACS 5.1 drops authentication with empty password.
I tried to authenticate dial-in users through Tacacs and Radius against AD with empty password but without success. ACS points to wrong AD password. Is it possible to authneticate remote users with empty password?
View 3 Replies
View Related
Nov 11, 2012
About to apply a patch for the first time on the ACS 5.3 tonight. Ihave tftp'd it onto a directory i have created on the server. However my support hints i may havre to rename the file ? copy the latest patch file you got from Cisco – you may need to rename as gpg) Current filename is 5-3-0-40-7.tar.tar
So would i need to rename this as 5-3-0-40-7.tar.gpz . If so i will rename it on my pc and redownload it on tftp
View 3 Replies
View Related
Jul 17, 2012
I have a Cisco ACS 5.1 virtual appliance which has been working fine, I have however just discovered that it is now unable to provide me with any logs. TACACS authentication is still working without any issues, the only problem I have is viewing the logs.
View 6 Replies
View Related
Mar 28, 2012
My question is on ASA and ACS5.2 users.Have my ASA SSL VPN and IPSEC VPN, the my ACS5.2 many users, for example, wireless user.I would now like to establish an independent user group, only the VPN user name and password, while both the ASA VPN can only allow users in this independent group of ACS5.2 VPN login, how to configure?
View 1 Replies
View Related
Nov 30, 2011
I have ACS4 and i am planning to upgrade to ACS5.I would like to have such a rules:I have user1, one ASA device which is VPN concentrator for remote users.ASA have two different tunnel-groups: one which allow for logging via certificate (with mandatory pki authorization thru ACS) with disabled Xauth,and second tunnel-group with allow login thru typical Xauth with authorization thru ACS which users external database (RSA Tokens).So i have one user1 which can login thru VPN using RSA tokencode or certificate.For example: on phone user1 uses certificate, and on PC station the same user1 uses token password.For tunnel-group with pki authorization ASA checks username in ACS and in typical scenario login="CN from certificate" and password="CN from certificate". So we would need "two credentials" for the user - one for pki authorization, and second one external database (RSA token).Is such scenatio possible under ACS 5 ? where one user uses different credentials based on tunnel-group usage ?
View 2 Replies
View Related
Aug 7, 2012
what is the maximum number of AAA clients supported by a single ACS5.3 instance?
View 1 Replies
View Related
Nov 8, 2012
I am trying to come up with a wireless solution for a campus deployment. The campus has ten buildings currently using Autonomous APs and are currently converting to Dual 5508 Controller model.
I would like to have a separate AP Mgmt subnet in each building, so I will configure an ip helper on the SVI on this vlan to:
Option1 - Point to the Internet Router configured with DHCP Option 43 with the controller IP addresses
Option 2 - Point to the Wireless LAN Controller itself.
Problem with Option 1 is that the Internet Router will now have to connect directly to the COE network to be able to route back to the AP mgmt subnets. So I would emply a VRF here to keep the separation.
Problem with option 2 is that there appears to only be one DHCP scope allowed on the controller. So this would mean a flat mgmt network across all buildings which I am trying to avoid. I know that after the AP joins the controller, I could change the IP and change the vlan on the port but this is not very neat.
So question is:
Is there a way of getting multiple DHCP pools on the controller?
View 3 Replies
View Related
Dec 4, 2011
I got a set of dhcp pool in one 3750 attached to diferent Vlans in the network, the wired network works fine, you can get from any switch port across the LAN a diferente VLANs IP. In my wlc2504 I got 5 WLANs with the DHCP server pointed to the VLAN in the 3750, but I just got one set of ip when i tried to connect to diferent WLAN, without connectivity, I can see all the Ap's, and ping the VLANs in the 3750,
View 4 Replies
View Related
Dec 25, 2012
We have an ASA 5510 and we also have two separate address pools which have been provided by our ISP. The addresses are not contiguous. Is there a way to configure an interface on the ASA to handle both sets of public address pools? If the outside interface is set up on eth0/0 would I create two subinterfaces (eth0/0.1, eth0/0.2) and assign each subinterface an address pool? Then just NAT/PAT to my heart's content? At that point I would want both to route to our inside network. So it's basically two inbound sets of IP addresses comming into one interface and then comming into the network... Right now the outside interface is configured with our first set of IP addresses. We wanted additional addresses and when we called our ISP they told us we already had them - just a different pool. Hence the question. I'm guessing that I wouldn't put anything specific on the outside interface and I would put the specifics on the subinterfaces?
View 4 Replies
View Related
