Cisco AAA/Identity/Nac :: 1113 ACS 4.2 Solutions Engine Replacement
May 7, 2013
Our ACS appliance (Cisco 1113) has died and it is not cost effective to get it replaced as it will only be used until the end of this year.Is it possible to get the tacacs software to install on a Windows server? How do I go about sourcing the software as the original documentation is no longer available? Will the fact that I have a defunct appliance be sufficient proof to get a copy of the software? We are currently running v4.1
View 1 Replies
ADVERTISEMENT
Aug 3, 2011
I Have a requirement to migrate from ipv4 to ipv6, I have checked the scalability of all the devices for this migration except ACS 1113 Solution Engine, Version 4.2. I couldnt reach the proper documentation to check its support for ipv6.
View 1 Replies
View Related
Sep 14, 2011
i'm trying to re-image an asc se 1113 with a recovery cd but i keep getting a disk error complaining of an invalid destination drive
View 1 Replies
View Related
May 2, 2011
we have a Cisco ACS 1113 SE running v4.0.1.44 and are trying to upgrade it to v.4.2.0.124 following the instructions to upgrade it to v4.1.1.24 first.
We are using the following CD "ACS SE Overall Upgrade CD ACS 3.3.4 and 4,1,1,24 Upgrades"
We can download the 4.1.1.24 image to the ACS appliance via distribution server but the upgrade fails- we obtained the following console output when attempted upgrade was tried;
Upgrade package was not verified
Applying this upgrade package may corrupt the appliance
Continue at your own risk!
[Code].....
View 5 Replies
View Related
Mar 27, 2013
I have some VSAs to import into my 1113 box, but I am stuck before I can even start :-( I have an accountActions.csv file containing some VSAs (this is just a test csv file.) I also have an FTP server that is accessible from the 1113 system.
When at the GUI for the 1113 I do System Configuration --> RDBMS Synchronization I get the RDBSM Synchronization Setup screen all right. I have entered all the parameters associated with the FTP server, and selected manual synchronization. The problem is that there are no entries in the AAA Servers window at the Synchronization Partners section at the bottom, and therefore I can't get the 1113 to retrieve my accountActions.csv file, an action that (I guess) is triggered by clicking on the Synchronize Now button.
I do have an AAA Server defined in the 1113. It's a RADIUS server called Self, not assigned to any NDG.I guess I do not understand this at all. I just want to import some external VSAs. Do I need to have an external AAA server to accomplish this? If not, how do I get my local Self server to appear in the list of synchronization partners?
View 1 Replies
View Related
Jul 18, 2012
Does cisco provides updates for underlying windows server in ACS SE 1113 ? Patch updates are available for ACS 4.2 , but how can we update underlying windows server , Does patches for ACS is enough to secure underlying windows server .
View 4 Replies
View Related
Jun 21, 2012
we have below softwares in the order to install one by one on the appliance 1113.
1)ACSse-Upgrade-Pkg-appl-mng-v4.2.1.15-K9.zip
(Appliance Management package)
2)ACSse-Upgrade-Pkg-acs-v4.2.1.15-K9.zip
(ACS Software package)
3)applAcs_4.2.1.15.8.zip
(ACS SE 4.2.1.15.8 cumulative patch)
take it forward to upgrade by step by step procedure. ( is that same like TFTP to transfer these packeges to appliance or different method? ) (we are using Windows XP system)
View 1 Replies
View Related
Oct 2, 2012
I tried to re-image a cisco 1113 ACS appliance into windows 2003 and was successful. I suppose to use this for my staging/LAB.My only problem is the NIC cards shows unknown since no appropraite driver was found. Googled for a few days but ends up nothing. What is the exact driver?
View 1 Replies
View Related
Apr 18, 2012
how profiling works exactly ?How intelligent is the profiling engine, meaning: Will it discover that one device has more than one different MACs and will merge the entries in the database ??
Example:This is in fact the same device, there is only one WLC-2500 in the network ....If it can discover that, what needs to be configured on the ISE to do that ?
View 2 Replies
View Related
Aug 12, 2010
How do we disable the telnet to ACS appliance 4.2 1113 SE
View 4 Replies
View Related
Mar 23, 2011
I want to gather an inventory of all devices that shows the AAA client name, IP addresses, authentication method and key under my Network Configuration on my ACS appliance. Is there a report to run in it that will shows this, or is something that has to be done manually?
View 1 Replies
View Related
Jun 28, 2012
I have an 1113 acs server which is not booting and hanged. Earlier its was working but i am facing the problem from today. I capture after reload the devices its asking for press F2 and F12 but when i try to do same its not allow to do the same.(Also attached the capture)
When i try to check the same through connect the desktop and reload the devices its showing the Cisco logo screen after that its showing the blank screen.is the ACS gone faulty or I will have to try with reimage the devices.
View 2 Replies
View Related
Jun 30, 2011
I just just purchased a CSACSE-1113-K9 and I need to wipe the Administrator password. I am also not sure what the default login credentials even are. There doesn't seem to be much out there for this device or maybe I'm just looking in the wrong place?
View 13 Replies
View Related
Mar 9, 2012
Having CSACSE-1113-K9 with ACS 4.2.15.I want to configure windows user database under extrenal user database but i get an error (attached) 'An error has occured while processing the Authen DLL Configure pagebecasue an error occured.I tried to stop the services and start agian but the same issue. The eappliance is secondary (backup) ACS. On the primary it is working fine.
View 1 Replies
View Related
Nov 2, 2011
I've recently installed a certificate on my ACS 1113 appliance and in the Admin setup enabled management access over HTTPS. Since then I've not been able to access the GUI console. I have done some troubleshooting and I'm fairly certain that I have a certificate issue as Firefox gives me the error: Certificate type not approved for application. (Error code: sec_error_inadequate_cert_type)when I try and connect. So I want to either reconfigure the management access to use just HTTP or remove the certificate. I have logged on to the serial console and there are no options her to do this. The RADIUS and TACACS functions are working correctly - I just can't logon via the GUI.
View 1 Replies
View Related
Mar 21, 2011
Any relevant doc for ACS4.2 on 1113 platform to be integrated with Unix Directory service having LDAP10.2.0.0 version from Oracle or guidance available.
View 1 Replies
View Related
Jun 19, 2012
For our client, we have two ACS 5.0 deployed in primary and secondary mode.Primary ACS is failed and we are going to replace the hardware.Problem is we dont have backup of primary ACS and have backup of only secondary ACS.Also there is certificate used for authentication of wireless users.In this case how we can proceed for for the restore.
If we promote secondary ACS to primary and join the New ACS as secondary,will the certificate also synchronised? or we need to create CSR and obtain the certificate for new ACS?
View 1 Replies
View Related
Jun 7, 2013
I have a clarification related with ACS 1121. Client needs a solution for ACS feature, instead of investing on ISE Base, is there any model exists as ACS appliance only. I believe ACS 1121 is going to be EOS and it says SNS 3415 is the replacement model .
What I am confused is , It is an ISE as well as ACS and there is separate licensing for ISE (as base and advanced). What should i do , if i need to select SNS 3415 as ACS appliance ? is it built in or should i need to add anything extra ?
View 3 Replies
View Related
May 4, 2011
I'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
View 1 Replies
View Related
Jan 26, 2013
I know ACS 5 lacks the IP Pools of earlier ACS versions. I'm looking at a 4 to 5 migration and was thinking of just configuring the IP Pools on the router ("ip pool local" etc) and sending back a RADIUS Cisco Attribute pair with the name of the pool. (Seemed like a neat fix, needs no extra kit, etc.)
I could have sworn that attribute pair existed... but I can't find it in ACS5! What's it's name?! Where is it!? Or have I gone mad!? (And, if I have gone mad, how would you go about fixing it?)
View 2 Replies
View Related
Jan 14, 2011
I am able to ping the ACS ENGINE 4.2 from any PC or device. But I am not able to ping any device from the box while logged in via SSH. while I can do so while logged in via console. Is this some kind of bug or is there any patch which after installing will allow me to ping devices from ACS SSH sessions.
View 3 Replies
View Related
Dec 5, 2011
Is the ISE going to support the 2500 series Wireless LAN Controller WLC? If yes in what release and appriximately when is that due to be released?
View 1 Replies
View Related
Apr 9, 2012
Currently we have a CISCO 3020 VPN Concentrator to terminate Lan-to-Lan tunnels and have our mobile workers connect via CISCO VPN client (300 users-employees and contractors-). Since this device is coming to an EOL this year we purchased a CISCO 5520 (below are the current licenses on it)
The licensing seems rather complicated, therefore this is my question:
- What VPN solution do you recommend for our users and contractors? it is my understanding the CISCO VPN client does not work with ASA 5500 series devices
- Is there a license needed to deploy VPN solutions for our remote users(employees/contractors)?
View 3 Replies
View Related
Jan 31, 2012
I have a ACS 1113 appliance (4.2 ver), I am trying to recover the forgotten password, when i insert the disc and restart the SE it's not showing the prompt to recover the password, i checked the boot path and priority everything is fine, the recovery disc is also fine ther r no issues with that it has been created as a bootable disc
View 4 Replies
View Related
Mar 6, 2011
How to upgrade from ACS Se 1113 (running 4.2.0.124) to a new 1121 appliance running version 5.2. We also run RA for AD integration ?
View 5 Replies
View Related
Mar 18, 2013
We are currently running a ACS 1113 with version 4.2 software. We are going to replace the 1113 ACS with two 1121 ACS.
View 1 Replies
View Related
Jan 18, 2011
Customer is using AIM-ATM AIM with a VWIC2-1MFT-T1/E1 card installed, and using the E1s in ATM mode.They have recently migrated to ISRG G2, but; ISR G2 (2911) dosen't support AIM Modules, and there is no relevant module for ATM.So is there anything we can do to accomplish same functionality on ISR G2 ?
View 1 Replies
View Related
Jul 1, 2012
I'm looking to upgrade our main router/firewall with something that has more throughput. This unit has 2 DMZ zones, internal switch and 2xWAN connections which is pretty handy as I'm utilizing all of them.How to resolve the issue of having a firewall and router in one device,What would be the replacement solution if I were to decide for Cisco solution? What is the best practice?
View 3 Replies
View Related
Jan 27, 2013
I would like to ask if what is the replacement for RV016? Is there any on the ISR G2 that can be set as a mulit-WAN router? Meaning can handle for more than two WAN connections.
View 2 Replies
View Related
Aug 12, 2011
DLINK RMA service is worst I have ever experienced.I sent my defective DLINK DIR-655 router to RMA department about 3 weeks ago, and finally got the replacement today. However, can you believe the replacement from RMA is also defective, not connecting Internet at all? After spending about 1 hour with technical support again to confirm the replacement is still defective, I was told to request another RMA. Should DLINK expect me to spend another $10 shipping fee and wait for another 3 week for another replacement because of a mistake made by DLINK RMA service?
View 7 Replies
View Related
May 3, 2013
Any replacement fan for the WS-C3750G-48TS-S switch that runs quieter than the one originally built into this router? I've searched a number of web sites and found plenty of replacement fans available but none of them show noise level specifications.
particular manufacturer/model combination that works in this router that will drop the noise level down while maintaining air flow. This switch is in a short network rack in an small office that also includes people. The current noise level isn't defining like some servers, but is loud enough to be distracting.
View 6 Replies
View Related
Apr 14, 2013
Bought and paid for Network Magic Pro 5.5. Bought new computer and need to install Network Magic Pro 5.5. Installation successfull. Unfortunately I have lost the activation key and the email it was on was deleted.
View 1 Replies
View Related
Apr 8, 2013
The issue im having is that i have recently had no issue with the wireless network. But today my laptops battery would not charge and as a result the computer died. I had to remove it to get it to charge again. Since then i have been unable to connect wirelessly to the network it simply says "windows is unable to connect" I have however been able to get online using an ethernet cable on the same router.ive looked around on varius forms but no information has assisted thus far.
View 17 Replies
View Related
