Bought and paid for Network Magic Pro 5.5. Bought new computer and need to install Network Magic Pro 5.5. Installation successfull. Unfortunately I have lost the activation key and the email it was on was deleted.
View 1 RepliesMy dad has a Windows 7 laptop. He installed Network Magic at my house on his laptop. Now my work laptop and my Kindle cannot get on the internet on my home network.Could the Network Magic lock down my home network?
View 1 Replies View RelatedWhy is my network magic software registering over 32 gigabites of memory being used?
View 1 Replies View Relatedwe're running some HP ProCurve 2520's (24 port PoE for desktops/phones) and 2510's for our server racks. The CPU's are a bit weak from what we can tell and sometimes end up with issues on them. The specs on the EAS series look like a decent jump compared to the older HP's. However I've never worked with these ever.
My other option is to go back to Cisco. However to make it fit our budget, we have to dump gig switches for 10/100 + PoE. Which isn't really a major issue on the desktop switches. We'll naturally put gig versions on the server racks. I like our ProCurves, however they cause issues from time to time.
I've also considered going back to Adtran, however I haven't kept up with what they have to offer. I'm tempted to play it safe and go the Cisco route. We're using ASA5510's active/passive for routing/firewall (gig versions).
Where can you get a replacement lens for the DCS-70 Outdoor enclosure?
View 3 Replies View RelatedDoes magic jack works with dial-up or should I up-grade with high speed internet ?
View 1 Replies View RelatedI have a D link 655 wireless router and my magic jack calls end after 15 seconds.
View 2 Replies View RelatedMy magic jack phone has stopped working and I cannot make ( or possibly receive) any phone calls
View 2 Replies View RelatedIn RFC 951, the format of BOOTP packet was legislated, but the vendor information was not legislated in this document, so the authors of this document had described that :"If the 'vend' field is used, it is recommended that a 4 byte 'magic number' be the first item within 'vend'. This lets a server determine what kind of information it is seeing in this field. "
I think it meant that the format of vendor information wasn't fixed in RFC 951, and any vendor can legislate a new format of vendor information by itself. And the value in "magic cookie" can be set by any vendor.But in RFC 2131, the format of DHCP packet was legislated, and the "magic cooke" was fixed to values 99, 130, 83 and 99, I think it meant that the format of option information in DHCP packet was fixed absolutely and any vendor can't legislate a new format by itself.
Since the format of option information in DHCP packet was fixed absolutely, why the network device needs "magic cookie" to identify the mode in which the succeeding data is to be interpreted ? I think the magic cookie is not useful in DHCP packet because the format of option information is fixed. In other words, there is only one format of option information forever.
Does RV110W-A-NA-K9 router have a utility to send magic packets to PCs on the LAN?
View 1 Replies View RelatedI was trying to upgrade my 3560 in the lab and I think I might have bricked it. I tried to load up IOS image c3560-ipservicesk9-mz.122-55.SE5.bin so I would have SSH support. I originally was running c3560-advipservicesk9-mz.122-25.SEE2.bin and now I can't get either to load, I get the error message 'magic number mismatch: bad mzip file'.I've formatted the switch and attempted to load the 122-55.SE5.bin image and got the error message above. In hope I could revert back to my old IOS I tried to load up the 122-25.SEE2.bin image but got the same error message! I've verified that the image was indeed on the flash. I'm at a loss here because I know both images are valid. I've tested them both on my other 3560's.
View 11 Replies View RelatedI would like to develop Voice Activation Detection using this sample program (google: ****/p_238-voice-activation-detection-voip) in Visual Studio 2008. But according to this website Visual Studio 2010 is highly recommended. Why VS 2010 is better than VS 2008?
View 1 Replies View RelatedI have erased the Cisco image from my PIX 515E, and while i tried to load a new image its asking for activation key. I tried its old key. but no use.
View 1 Replies View RelatedI got my WRT54GL v1.1 yesterday and connected it to my pc [wired] and netbook [wireless]. I thought all was well until I noticed that my Magic Jack VoIP telephone began dropping calls after about 1 minute. My first course of action was to disable SPI firewall in router and reboot. That had no affect on the situation, then I noticed that my send light on my cale modem [ no manufacturer listed on unit] was not blinking as it has done before the router installation. I reverted to my cable modem to pc only set up and my Magic Jack worked just fine. I need to use the router for wireless, so I need to find a solution to this problem. I took a look at my firmware version and saw that it was not current, but I wanted to bring my problem here for a possible solution be for I flashed new firmware.
View 9 Replies View RelatedI sometimes am forced to use my computer at work to set-up wireless networks for employees who move into temporary apartments. Now every time I am at my home, my computer, ipad, and iphone keep redirecting to comcast home activation page. The problem is the home activation page that comes up is for one of the apartments I set-up for my employer. It seems to be stuck on the final steps of this other persons comcast set-up and I cant get it to go away. I have a Linksys router with a secure network. It shows I am connected to my network, but when I try to get on-line it send me right back to Comcast activation page for someone elses account. Countless calls to Comcast have gotten me know where. Since the final steps of the comcast activation involve downloading desk top software, and the ipad will not let you download desktop software even into dropbox. It has made my ipad useless when I'm at home.
View 2 Replies View RelatedWe have successfully activated Protectlink Web but as we have observed that when we try to restart our router, Cisco Protectlink status is active but then when you look on license information on platform the status just states there is "Waiting...."Web Protection no longer working..In order for us to resolve this. We have to restore our router to factory default and then activate Protectlink and set all the settings again..As I have said this only happens when we restart our router?
View 1 Replies View RelatedI've purchased a used ASA 5505 device. Upon reseting and looking at the startup, I see that it is unable to retrieve Activation License and used default. Activation License shows as all zeros.
Is there a way to find whatever Activation License is tied to my device from Cisco without a service contract ? or I have to live with the default ?
My Cisco 2811 router starts to hang & give the following error. "Original nvconfig doesn't have a correct magic number recovering from backup."I need to fix it ASAP.I've already enter common & change confreg to 0x2142 & reset but same problem occur.
View 8 Replies View RelatedWe got a replacement ASA 5580 from Cisco. We were not aware of PAK, Is there any other possible to generate Activation key? Can we generate PAK or Activation Key using SO (service order) number?
View 1 Replies View RelatedWe have recently got 2 of our Cisco ASA 5520 firewalls through RMA. These are supposed to run in a Active/Active Failover Pair. There was only 1 RMA request that was opened for both the firewalls. We have received only 1 Activation key for this RMA request for both the firewalls. Just want to check with you if this Activation key will work on both firewalls or do we need a get a seperate one for the other box.
View 1 Replies View RelatedI went through the install procedure outlined in the ProtectLink Gateway install manual and i activated the ProtectLink Web product through Trend Micro (which shows up through their web site as a registered product to me). It still doesn't show up as installed on the SA540 (under Administration/License Management screen). When I try to activate the product again, it shows as "Already registered". Trend has no idea why it won't work. They said Cisco sold the license, so try their support.
View 1 Replies View RelatedMy customer's Protectlink license is set to expire in 2 weeks. I would like to enter the activation code I just obtained, but cannot find the link. When I go to the license page in the router, there is a link to renew, but that just takes me to the website to enter the new key code, then receive an activation code. There is not howver any link to enter the activation code. I assume that once the license actually expires, the activation link will then show up, but there must be a way to get to this page ahead of time.
View 3 Replies View RelatedIf I could swap around the bootvar on my 5505 without affecting the activation key.this is to learn different NAT on pre and 8.3+ IOS.
# sh bootvar
BOOT variable = disk0:/asa825-26-k8.bin
Current BOOT variable = disk0:/asa825-26-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
[code].....
we have a WLC 4404, Software Version 4.2.61.0 and the following Problem. The WLC worked for many years with the SSID "SKHGR". In addition to the existing SSID I have a second SSID "SKHGR-M" is created. The configuration of the two SSID's is identical.
The problem is: when I activate the second SSID, the AP losing connection with the WLC. In the log appears"AP disassociated. ... Base Radio" and "
"not advertising ssid due to radio policy". The AP's connect with the WLC, lose after few seconds the contact.
We have in our business some RV042 with Cisco ProtectLink Webfiltering. Until now we do not had any problem of activate the licence and it works has we axpected.
But the two last time that we went through the install procedure outlined in the ProtectLink Gateway install manual, the both RV042 do not run the service, we do not know why... So we have decide to stop buy and sold them until we find a solution.
The firmware install are the last one.
When I try to activate the product again, it shows as "Already registered". Trend has no idea why it won't work. They said Cisco sold the license, so try their support.
I have a new 8881G-w router with the following info:
(C880DATA-UNIVERSALK9-M), Version 12.4(22)YB2, Serial No. FTX1331830T
Need activating the CDMA . when I tried to login to the Cellular interface it shows me the following warning:Warning: 3G Modem is not inserted Configuration will not be effective until modem is inserted
I want to activate and configure CDMA and i don`t know from to start..
I recently discovered the SIM card slot under the battery in my Latitude D630.I placed the SIM card in the slot but nothing happened.
The broadcom utility indicates that there is no device detected.How do I activate this device?does it need a specific driver?
I have cisco 5508 wlan controller with 8 ports can i connect 8 switches on these port. If i connect what will be configuration to work all these ports because only port 1 is working if i connect to switch remaining ports when i connect status showing is enable but not working.
View 2 Replies View RelatedCustomer is using AIM-ATM AIM with a VWIC2-1MFT-T1/E1 card installed, and using the E1s in ATM mode.They have recently migrated to ISRG G2, but; ISR G2 (2911) dosen't support AIM Modules, and there is no relevant module for ATM.So is there anything we can do to accomplish same functionality on ISR G2 ?
View 1 Replies View RelatedDLINK RMA service is worst I have ever experienced.I sent my defective DLINK DIR-655 router to RMA department about 3 weeks ago, and finally got the replacement today. However, can you believe the replacement from RMA is also defective, not connecting Internet at all? After spending about 1 hour with technical support again to confirm the replacement is still defective, I was told to request another RMA. Should DLINK expect me to spend another $10 shipping fee and wait for another 3 week for another replacement because of a mistake made by DLINK RMA service?
View 7 Replies View RelatedI'm looking to upgrade our main router/firewall with something that has more throughput. This unit has 2 DMZ zones, internal switch and 2xWAN connections which is pretty handy as I'm utilizing all of them.How to resolve the issue of having a firewall and router in one device,What would be the replacement solution if I were to decide for Cisco solution? What is the best practice?
View 3 Replies View RelatedThe issue im having is that i have recently had no issue with the wireless network. But today my laptops battery would not charge and as a result the computer died. I had to remove it to get it to charge again. Since then i have been unable to connect wirelessly to the network it simply says "windows is unable to connect" I have however been able to get online using an ethernet cable on the same router.ive looked around on varius forms but no information has assisted thus far.
View 17 Replies View RelatedI would like to ask if what is the replacement for RV016? Is there any on the ISR G2 that can be set as a mulit-WAN router? Meaning can handle for more than two WAN connections.
View 2 Replies View Related