Cisco AAA/Identity/Nac :: 1113 ACS Server Not Booting And Hanged
Jun 28, 2012
I have an 1113 acs server which is not booting and hanged. Earlier its was working but i am facing the problem from today. I capture after reload the devices its asking for press F2 and F12 but when i try to do same its not allow to do the same.(Also attached the capture)
When i try to check the same through connect the desktop and reload the devices its showing the Cisco logo screen after that its showing the blank screen.is the ACS gone faulty or I will have to try with reimage the devices.
View 2 Replies
ADVERTISEMENT
Mar 11, 2013
I have cisco AIR-AP1141N-A-K9 its new one ,when i start to work on the pc through CLI ,im getting like this screen after hanged up ,it's not moving to next step?
View 1 Replies
View Related
Jan 31, 2012
I have a ACS 1113 appliance (4.2 ver), I am trying to recover the forgotten password, when i insert the disc and restart the SE it's not showing the prompt to recover the password, i checked the boot path and priority everything is fine, the recovery disc is also fine ther r no issues with that it has been created as a bootable disc
View 4 Replies
View Related
Sep 14, 2011
i'm trying to re-image an asc se 1113 with a recovery cd but i keep getting a disk error complaining of an invalid destination drive
View 1 Replies
View Related
May 2, 2011
we have a Cisco ACS 1113 SE running v4.0.1.44 and are trying to upgrade it to v.4.2.0.124 following the instructions to upgrade it to v4.1.1.24 first.
We are using the following CD "ACS SE Overall Upgrade CD ACS 3.3.4 and 4,1,1,24 Upgrades"
We can download the 4.1.1.24 image to the ACS appliance via distribution server but the upgrade fails- we obtained the following console output when attempted upgrade was tried;
Upgrade package was not verified
Applying this upgrade package may corrupt the appliance
Continue at your own risk!
[Code].....
View 5 Replies
View Related
Mar 27, 2013
I have some VSAs to import into my 1113 box, but I am stuck before I can even start :-( I have an accountActions.csv file containing some VSAs (this is just a test csv file.) I also have an FTP server that is accessible from the 1113 system.
When at the GUI for the 1113 I do System Configuration --> RDBMS Synchronization I get the RDBSM Synchronization Setup screen all right. I have entered all the parameters associated with the FTP server, and selected manual synchronization. The problem is that there are no entries in the AAA Servers window at the Synchronization Partners section at the bottom, and therefore I can't get the 1113 to retrieve my accountActions.csv file, an action that (I guess) is triggered by clicking on the Synchronize Now button.
I do have an AAA Server defined in the 1113. It's a RADIUS server called Self, not assigned to any NDG.I guess I do not understand this at all. I just want to import some external VSAs. Do I need to have an external AAA server to accomplish this? If not, how do I get my local Self server to appear in the list of synchronization partners?
View 1 Replies
View Related
Jul 18, 2012
Does cisco provides updates for underlying windows server in ACS SE 1113 ? Patch updates are available for ACS 4.2 , but how can we update underlying windows server , Does patches for ACS is enough to secure underlying windows server .
View 4 Replies
View Related
Jun 21, 2012
we have below softwares in the order to install one by one on the appliance 1113.
1)ACSse-Upgrade-Pkg-appl-mng-v4.2.1.15-K9.zip
(Appliance Management package)
2)ACSse-Upgrade-Pkg-acs-v4.2.1.15-K9.zip
(ACS Software package)
3)applAcs_4.2.1.15.8.zip
(ACS SE 4.2.1.15.8 cumulative patch)
take it forward to upgrade by step by step procedure. ( is that same like TFTP to transfer these packeges to appliance or different method? ) (we are using Windows XP system)
View 1 Replies
View Related
Oct 2, 2012
I tried to re-image a cisco 1113 ACS appliance into windows 2003 and was successful. I suppose to use this for my staging/LAB.My only problem is the NIC cards shows unknown since no appropraite driver was found. Googled for a few days but ends up nothing. What is the exact driver?
View 1 Replies
View Related
Aug 12, 2010
How do we disable the telnet to ACS appliance 4.2 1113 SE
View 4 Replies
View Related
Mar 23, 2011
I want to gather an inventory of all devices that shows the AAA client name, IP addresses, authentication method and key under my Network Configuration on my ACS appliance. Is there a report to run in it that will shows this, or is something that has to be done manually?
View 1 Replies
View Related
May 7, 2013
Our ACS appliance (Cisco 1113) has died and it is not cost effective to get it replaced as it will only be used until the end of this year.Is it possible to get the tacacs software to install on a Windows server? How do I go about sourcing the software as the original documentation is no longer available? Will the fact that I have a defunct appliance be sufficient proof to get a copy of the software? We are currently running v4.1
View 1 Replies
View Related
Jun 30, 2011
I just just purchased a CSACSE-1113-K9 and I need to wipe the Administrator password. I am also not sure what the default login credentials even are. There doesn't seem to be much out there for this device or maybe I'm just looking in the wrong place?
View 13 Replies
View Related
Mar 9, 2012
Having CSACSE-1113-K9 with ACS 4.2.15.I want to configure windows user database under extrenal user database but i get an error (attached) 'An error has occured while processing the Authen DLL Configure pagebecasue an error occured.I tried to stop the services and start agian but the same issue. The eappliance is secondary (backup) ACS. On the primary it is working fine.
View 1 Replies
View Related
Nov 2, 2011
I've recently installed a certificate on my ACS 1113 appliance and in the Admin setup enabled management access over HTTPS. Since then I've not been able to access the GUI console. I have done some troubleshooting and I'm fairly certain that I have a certificate issue as Firefox gives me the error: Certificate type not approved for application. (Error code: sec_error_inadequate_cert_type)when I try and connect. So I want to either reconfigure the management access to use just HTTP or remove the certificate. I have logged on to the serial console and there are no options her to do this. The RADIUS and TACACS functions are working correctly - I just can't logon via the GUI.
View 1 Replies
View Related
Mar 21, 2011
Any relevant doc for ACS4.2 on 1113 platform to be integrated with Unix Directory service having LDAP10.2.0.0 version from Oracle or guidance available.
View 1 Replies
View Related
Aug 3, 2011
I Have a requirement to migrate from ipv4 to ipv6, I have checked the scalability of all the devices for this migration except ACS 1113 Solution Engine, Version 4.2. I couldnt reach the proper documentation to check its support for ipv6.
View 1 Replies
View Related
May 4, 2011
I'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
View 1 Replies
View Related
May 10, 2012
I have an acs 5.0 running on Cisco 1120 appliance. It has worked for 2 years. Suddenly, I discovered that user can no longer login with their credentials. On close examination, when I console, the booting does not complete. Screen shot attached.
View 3 Replies
View Related
Jun 6, 2011
In my Company there is a core Switch 4500 series , to which in the 1st module servers are connected and in the second module 2960 , 3750 series Switches are connected, problem is that the Utilization of Core switch is very high and the core gets hanged. the configuration of the senerio is VTP domain i.e core is Server and the rest are Clients....
View 12 Replies
View Related
Apr 24, 2011
I am facing a strange problem in my WLAN Setup. none of my wireless clients are able to associate with Wireless LAN but when I delete and create a new wireless profile in WLC 4404 clients starts associating with WLAN. every 2-3 days I had to delete and create wlan profile. Is it related to IOS bug or any other problem? My Wireless LAN Controller image is AIR-WLC4400-K9-5-1-151-0.aes.
View 4 Replies
View Related
Mar 6, 2011
How to upgrade from ACS Se 1113 (running 4.2.0.124) to a new 1121 appliance running version 5.2. We also run RA for AD integration ?
View 5 Replies
View Related
Mar 18, 2013
We are currently running a ACS 1113 with version 4.2 software. We are going to replace the 1113 ACS with two 1121 ACS.
View 1 Replies
View Related
Mar 21, 2011
we Bough new mcs server in order to install ACS 4.1,now acs is running on normal PC and its fully configured , so now i want to back up the acs database and the configuration file in order to install it in the new server so how to do that
View 4 Replies
View Related
May 9, 2011
I need to patch our ACS server to 4.2.0.124.17 from 4.2.0.124.6. My question is, do I need to apply the same patch to our remote agents? Cisco's documentation only states that both the ACS and the Remote Agents need to be 4.2.0.
View 1 Replies
View Related
May 23, 2013
I am wanting to generate a signing request for an ACS 5.3 box to send to a Microsoft CA. Is there anyone out there using a MS CA for eap-tls?
View 1 Replies
View Related
Dec 7, 2009
I'wont to upgade my ACS server 5.0.0.21 to 5.1 . I wont to use Active Directory . it's seem that in my curent version AD is not supported !
View 12 Replies
View Related
Apr 21, 2013
I am looking for any PDF, recomendation, link for best approach for secondary ACS as resiliency.
View 4 Replies
View Related
Mar 2, 2011
We have enabled EAP-TLS authentication for our wireless LAN end user in our network setup , And we have defined certificate on our old acs server 3.3 from a third party CA . I want to use the same certifcate which is being used in 3.3 ,how i can copy that certficate from 3.3 and get it installed on new acs 4.2 .
View 7 Replies
View Related
May 13, 2012
Question on this, is 5.2 backwards compatible with 4.2 appliance? If not, what is needed to bring the 4.2 appliance up to 5.2 and will the VMWare version work for the second system with the appliance as primary? Years ago I had 2 of them and replication worked flawlessly, but we had to take the one unit offline for another project and have never replaced it.
View 3 Replies
View Related
Jun 3, 2011
configure AAA (Radius server, access list) There are two devices An access point and cisco 881w. It is necessary to set up authentication through a radius server. You can configure detailed how to do this?
View 3 Replies
View Related
Nov 30, 2011
I'm having problems settting up a Guest NAC server to authenticate administrative users against a ACS 5.x server. In the ACS RADIUS Authentication log, I can see the user authentication is successful.In the AAA Diagnostics log, I can see the following warning:An Access-Request MUST contain either a NAS-IP-Address or a NAS-Identifier or both; Continue processing.
View 2 Replies
View Related
Feb 7, 2011
How to convert a 3140 CAM to a CAS ? if so what software / licensing would be required and is there a documented process
View 1 Replies
View Related
