Cisco AAA/Identity/Nac :: Unable To Access CS ACS 1113 Appliance After Enabling HTTPs
Nov 2, 2011
I've recently installed a certificate on my ACS 1113 appliance and in the Admin setup enabled management access over HTTPS. Since then I've not been able to access the GUI console. I have done some troubleshooting and I'm fairly certain that I have a certificate issue as Firefox gives me the error: Certificate type not approved for application. (Error code: sec_error_inadequate_cert_type)when I try and connect. So I want to either reconfigure the management access to use just HTTP or remove the certificate. I have logged on to the serial console and there are no options her to do this. The RADIUS and TACACS functions are working correctly - I just can't logon via the GUI.
View 1 Replies
ADVERTISEMENT
Jun 21, 2012
we have below softwares in the order to install one by one on the appliance 1113.
1)ACSse-Upgrade-Pkg-appl-mng-v4.2.1.15-K9.zip
(Appliance Management package)
2)ACSse-Upgrade-Pkg-acs-v4.2.1.15-K9.zip
(ACS Software package)
3)applAcs_4.2.1.15.8.zip
(ACS SE 4.2.1.15.8 cumulative patch)
take it forward to upgrade by step by step procedure. ( is that same like TFTP to transfer these packeges to appliance or different method? ) (we are using Windows XP system)
View 1 Replies
View Related
Aug 12, 2010
How do we disable the telnet to ACS appliance 4.2 1113 SE
View 4 Replies
View Related
Mar 23, 2011
I want to gather an inventory of all devices that shows the AAA client name, IP addresses, authentication method and key under my Network Configuration on my ACS appliance. Is there a report to run in it that will shows this, or is something that has to be done manually?
View 1 Replies
View Related
Mar 6, 2011
How to upgrade from ACS Se 1113 (running 4.2.0.124) to a new 1121 appliance running version 5.2. We also run RA for AD integration ?
View 5 Replies
View Related
Mar 8, 2012
When accessing the E3200 router using then ERROR 501.Not Implemented.That method is not implemented. The error occured after enabling the "Local Management Access, Access via: HTTPS" option on the Administration > Management tab.I tried different browsers FireFox (version 10), Internet Explorer (version 8,9), the same error was displayed and no acces granted to the E3200 router. I reseted the router and tried the latest firmware 1.0.03 build 9 Feb 1, 2012, but after enablib the option the issue occured again and it is not possible to connect to the router.
View 9 Replies
View Related
Mar 18, 2013
We are currently running a ACS 1113 with version 4.2 software. We are going to replace the 1113 ACS with two 1121 ACS.
View 1 Replies
View Related
Feb 20, 2010
I could not SSH to ACS SE appliance? Why I could not, however I can do on another ACS SE.
note that I can ping the ACS SE, after disabling the CSA, so netowrk connectivity is ok.
Cisco Secure ACS: 4.2.0.124.
View 5 Replies
View Related
Jul 21, 2011
I'm trying to upload the 5-2-0-26-4.tar.gpg patch to our ACS and so far have been unsucessfull. I keep getting the "please verify the patch bundle is valid".
When I download the 5-2-0-26-4.tar.gpg file, for some reason the download always comes down from Cisco as 5-2-0-26-4.tar.tar. I've renambed the file to 5-2-0-26-4.tar.gpg and verified the MD5.
View 1 Replies
View Related
Dec 6, 2011
I have installed 2 ACS 5.2 appliances, the two appear as Primary. When I try to register one of them with the other one using "System Administrator -> Local Operation -> Deployment Operations" I get the following message:
This System Failure occurred: Unable to authenticate with node.. Your changes have not been saved.Click OK to return to the list page.
I have tried with both "ACSAdmin" and "admin" users with their respective passwords.
View 3 Replies
View Related
Apr 14, 2013
We have had an active ACS unit for many years now, and we've added a second one, both are 1121 Appliances. The newer one came with 5.4, so we upgraded the older one to 5.4.
We setup replication between the two, with the newer one primary and the older one secondary. Problem is, windows based clients are unable to authenticate to the older ACS appliance. The only problem we can see is that it indicates that adclient is not running, under Monitoring & Troubleshooting, ACS Health Instance Summary.
So... been trying to figure out how to correct this, yet have been hard pressed to find a knowledgebase article that works. So far, Cisco hasn't added my smartNet on the new box so I can get some support?
View 6 Replies
View Related
Apr 26, 2012
I have enabled SSH on my 3750 switches and notice that https is not working. Iam not sure they are related but seems to be oddly coincidental. Therefore find it diffficult to monitor using CNA 5.7.6.
configs are given below
gvadc-sf01#sh run | i ip http
ip http server
ip http access-class 11
ip http secure-server
From my machine, i should normally have access to https running on the switch but isnt the case..
Do I need to generate a new crypto key separately for https?
View 5 Replies
View Related
Feb 25, 2013
For some reason i can't get access anymore to the web interface of our ACS 5.3 appliance.Where i used to get a certificate warning first, and after that the ACS5 login screen, i now get totally no response anymore in my IE browser.
I can telnet to port 443 of the unit however. And i (fortunately) still have ssh access to the unit. So i did a reload (microsoft habits) but that did'nt solve anything.https access to other systems from the same browser is functioning fine
=================================
admin# sh ver
Cisco Application Deployment Engine OS Release: 1.2ADE-OS Build Version: 1.2.0.228ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.All rights reserved.Hostname: <deleted>
Version information of installed applications---------------------------------------------
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.3.0.40.8Internal Build ID : B.839Patches :5-3-0-40-55-3-0-40-8
=================================
View 4 Replies
View Related
Sep 25, 2011
i have a 4710 appliance (one armed) and i am load balancing with two webservers. In the URL, there are links that need to be redirected to https:
[URL]
i am using the
rserver redirect REDIRECT-TO-HTTPS[URL]
The https is working but i have a problem. when i access the Main link "first" it is redirected to https to the Main link.But if i access one of the Sublinks directly(without having to click on the main link first) the page is redirected to https but to the Main Link. i have to click the Sublink again in order to get the page.How can i redirect to https and stay on the same page? What might be the general link in the webserver-redirection?
View 4 Replies
View Related
Dec 9, 2010
I was unable to access my ASA 5520 using HTTP/HTTPS even on the management interface. I had upgrade the ASA IOS to asa832-k8.bin and ASDM to asdm-634-53.bin. But, the issue still the same.
My browser show the error message as attach image.
PGA-Firewall-02# sh run: Saved:ASA Version 8.3(2)!hostname PGA-Firewall-02enable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface GigabitEthernet0/0 nameif public security-level 0 ip
[Code]....
View 7 Replies
View Related
Sep 14, 2011
i'm trying to re-image an asc se 1113 with a recovery cd but i keep getting a disk error complaining of an invalid destination drive
View 1 Replies
View Related
May 2, 2011
we have a Cisco ACS 1113 SE running v4.0.1.44 and are trying to upgrade it to v.4.2.0.124 following the instructions to upgrade it to v4.1.1.24 first.
We are using the following CD "ACS SE Overall Upgrade CD ACS 3.3.4 and 4,1,1,24 Upgrades"
We can download the 4.1.1.24 image to the ACS appliance via distribution server but the upgrade fails- we obtained the following console output when attempted upgrade was tried;
Upgrade package was not verified
Applying this upgrade package may corrupt the appliance
Continue at your own risk!
[Code].....
View 5 Replies
View Related
Mar 27, 2013
I have some VSAs to import into my 1113 box, but I am stuck before I can even start :-( I have an accountActions.csv file containing some VSAs (this is just a test csv file.) I also have an FTP server that is accessible from the 1113 system.
When at the GUI for the 1113 I do System Configuration --> RDBMS Synchronization I get the RDBSM Synchronization Setup screen all right. I have entered all the parameters associated with the FTP server, and selected manual synchronization. The problem is that there are no entries in the AAA Servers window at the Synchronization Partners section at the bottom, and therefore I can't get the 1113 to retrieve my accountActions.csv file, an action that (I guess) is triggered by clicking on the Synchronize Now button.
I do have an AAA Server defined in the 1113. It's a RADIUS server called Self, not assigned to any NDG.I guess I do not understand this at all. I just want to import some external VSAs. Do I need to have an external AAA server to accomplish this? If not, how do I get my local Self server to appear in the list of synchronization partners?
View 1 Replies
View Related
Jul 18, 2012
Does cisco provides updates for underlying windows server in ACS SE 1113 ? Patch updates are available for ACS 4.2 , but how can we update underlying windows server , Does patches for ACS is enough to secure underlying windows server .
View 4 Replies
View Related
Oct 2, 2012
I tried to re-image a cisco 1113 ACS appliance into windows 2003 and was successful. I suppose to use this for my staging/LAB.My only problem is the NIC cards shows unknown since no appropraite driver was found. Googled for a few days but ends up nothing. What is the exact driver?
View 1 Replies
View Related
Feb 29, 2012
I can not access my Linksys E3000 router via https://192.168.1.1.Before this mishap, I was able to gain access to my Linksys E3000 router via http://192.168.1.1 and/or the Cisco Connect software application on Windows 7. Yesterday, I went into my router's administration page and disabled http, and enabled https. I then closed out all browsers, restarted them and entered https://192.168.1.1
After that, I learned quickly I made a huge mistake to make these changes. I simply can not access my router admin wired or wirelessly. Accessing the internet works great, but router admin page is a no go.Firefox and IE states, "There is a problem with this website's security certificate." and was unable to proceed.Firefox even gave me the option to accept a security exemption to proceed, but that failed.
I have also tried using the Cisco Connect utility, and that also failed. I have taken these steps and not been able to access my router's admin page.I don't want to take the last final resort to reset my router and re-enter my settings again. I know I saved the router's backup file somewhere, but can't find it.Is there another way for me to gain access via https with http disabled? All I want to do now is go back in and change it back to enable http access.
View 9 Replies
View Related
Jan 17, 2013
i am unable to launch ASDM, and access https:// to run Asdm..everything worked find yesterday but now for some reason it wont work?When i am trying to log in with the asdm it just hangs on the connecting to device... please wait...When i am tryng access the https://... i get the ssl do you want to trust.. and i press proceed anyway and i get an error
Asa 5510
Device manager version 6.1
System image file is "disk0:/asa804-k8.bin
Also i am accessing the asa with ssh without any issues
View 10 Replies
View Related
Jun 28, 2012
I have an 1113 acs server which is not booting and hanged. Earlier its was working but i am facing the problem from today. I capture after reload the devices its asking for press F2 and F12 but when i try to do same its not allow to do the same.(Also attached the capture)
When i try to check the same through connect the desktop and reload the devices its showing the Cisco logo screen after that its showing the blank screen.is the ACS gone faulty or I will have to try with reimage the devices.
View 2 Replies
View Related
May 7, 2013
Our ACS appliance (Cisco 1113) has died and it is not cost effective to get it replaced as it will only be used until the end of this year.Is it possible to get the tacacs software to install on a Windows server? How do I go about sourcing the software as the original documentation is no longer available? Will the fact that I have a defunct appliance be sufficient proof to get a copy of the software? We are currently running v4.1
View 1 Replies
View Related
Jun 30, 2011
I just just purchased a CSACSE-1113-K9 and I need to wipe the Administrator password. I am also not sure what the default login credentials even are. There doesn't seem to be much out there for this device or maybe I'm just looking in the wrong place?
View 13 Replies
View Related
Mar 9, 2012
Having CSACSE-1113-K9 with ACS 4.2.15.I want to configure windows user database under extrenal user database but i get an error (attached) 'An error has occured while processing the Authen DLL Configure pagebecasue an error occured.I tried to stop the services and start agian but the same issue. The eappliance is secondary (backup) ACS. On the primary it is working fine.
View 1 Replies
View Related
Mar 21, 2011
Any relevant doc for ACS4.2 on 1113 platform to be integrated with Unix Directory service having LDAP10.2.0.0 version from Oracle or guidance available.
View 1 Replies
View Related
Aug 3, 2011
I Have a requirement to migrate from ipv4 to ipv6, I have checked the scalability of all the devices for this migration except ACS 1113 Solution Engine, Version 4.2. I couldnt reach the proper documentation to check its support for ipv6.
View 1 Replies
View Related
May 4, 2011
I'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
View 1 Replies
View Related
Nov 16, 2011
All users are located in the local identity store.So - assume I do not implement ACS but I do turn on password expiration after 60 or 90 days. Will a user whose password is about to expire attempts to authenticate against ACS 5.2, will they be notified that their password is about to expire?Also, when a user attempts to authenticate but their password expired yesterday, will they be prompted to change it and if so, how will that prompt to change it be presented?
View 3 Replies
View Related
Mar 29, 2012
My site got the NAC-3315 appliance and we would like to reimage this appliance to inline posture mode (for VPN purpose)What's the proper migration process should deal with this? Is the NAC-3315 hardware comply with the Inline posture mode requirement?
View 4 Replies
View Related
May 2, 2011
Newly shipped cisco ACS appliance 1121 has been shipped with ACS version 5.0 , I need to downgrade to ACS version 4.2,0 , I could not see recovery CD or DVD for acs 4.2 along with shipment , Is ACS 1121 appliance is comptaible to acs 4.2.0 version ? .
My ACS BOM details
CSACS-1121-K9
ACS 1121 Appliance With 5.1 SW And Base license
[code]....
View 2 Replies
View Related
Jun 18, 2011
This is a new installation.I did to configure the ACS to connect to the AD to authenticate users and retrieve the user information for group mapping as following step. Go to Users and Identity Stores > External Identity Stores > Active Directory, and enter the domain name and provide a username/password that will allow connect to the domain.Next, click on the Test Connection button to validate joining the domain.
I got success test connection. But when I click Save Changes. I got error .
View 5 Replies
View Related
