I'm having problems settting up a Guest NAC server to authenticate administrative users against a ACS 5.x server. In the ACS RADIUS Authentication log, I can see the user authentication is successful.In the AAA Diagnostics log, I can see the following warning:An Access-Request MUST contain either a NAS-IP-Address or a NAS-Identifier or both; Continue processing.
View 2 RepliesCan use ACS 5.2 as Guest user authentication server?
View 3 Replies View RelatedI installed NGS 2.0.2 for wireless guest user management and authentication. I implement webauth via webauth page on wlc deployed.One Branch with a WLC5508 version 7.0 wireless anchor controller is working on the NGS.But now I integrate next branch with WLC4402 version 6.0.188 and the authentication of users at the new branch gets an error, wrong user/password.
I double checked configuration and user/password but I can't find any configuration error. Also stopping and starting of radius service and reboot of NGS still does not work. I tried to debug the radius via web interface and watched for the loggfile and there is still a reject.I also tried the freeradius command radiusd -X but I got an error when starting the radiusd -X.
1.) How can I figure out, if I will get the correct password from my WLC ? Are there any debug options to see more ? e.g. some cli commands, radiustest utilities or how to get the received password from the chap challenge of the debug ?
2.) I have appended a part from my radius loggfile. How can I find the detailed error in the radius log file? Is it correct that the password in the debug file is empty ? raiuds logg line "[radius-user-auth] expand: %{User-Password} -> "
I have just reimaged one of my ACS appliances as it was completely corrupted.Now I have done this I have connected it to the network via DHCP so I can patch it from v4.2 to the latest version.The machines is now on the same VLAN as my workstation. When I try to login I get the message
"This machine cannot be used for administration"
The box is a vanilla install with only the passwords set on the machine - my workstation has its local firewall turned off and is not using a proxy server. as I can't log into the gui I can't change any settings there?
I want to use LDAP accounts to administrate switches.It works fine when I use telnet. I just need to push RADIUS attribute Login-Service (ID 15) with Telnet value (ID 0) Now, I want to use SSH (for security reasons )RADIUS have to push RADIUS attribute Login-Service (ID 15) with SSH value (ID 50)(For example with Steel-belt RADIUS [URL] SSH value doesn't exist in RADIUS IETF dictionary for Login-Service attribute.I can't create SSH value because this dictionary is protected...
View 2 Replies View RelatedI'm trying to configure ACS 5.1 as radius server for a catalyst switch but i can't make it work.I keep on getting the "11033 Selected Service type is not Network Access" error message.
Tacacs works fine but radius does not. Any sample device administration config to use with RADIUS?it seem the service type does not work with radius in this scenario ( radius + device admin).
Under 'Policy Elements/Authorization and Permissions/Network Access/Authorization profiles' I have defined a profile and the following Attribute:Attribute = F5-LTM-User-RoleType = Unsigned Integer 32Value = 300.
My question is:How can I define the same as above using 'Device Administration/Shell Profiles' ?
There is a Custom Attributes tab but I cannot figure out how to specify the 'Type' field. (Under Custom Attributes tab there is only space for 2 fields and not 3 fields).
WLC - 7.2.110.0
ISE - 1.1.1
I'm new to ISE. I want to set up a very basic method for BYOD users to access our wireless network. I've set up an SSID for external Web Auth, where users get redirected to the ISE Guest Portal: [URL]
At that screen, users can enter their Active Directory credentials and login. Although the authentcation shows as successful under Operations -> Authentications, the user is redirected to the device registration page. On that page they see the message "We are unable to determine access privileges in order to access the network. Please contact your administrator." Their device MAC is listed, and they can enter a description but the "Register" button is greyed out.
I'm getting overwhelmed with the amount of documentation available as well as the new terminology. I'm familiar with using Windows RADIUS servers, but ISE is very foreign to me now. Is there any documentation to understand how access requests are processed?
Managed to guest LWA working with ISE for wireless guest portal access? I have Cisco 4400 WLCs running latest 7.0 code and ISE 1.1.2.All guest portal examples seem to be CWA which only works on 7.2 code.Am I without hope getting this working on 7.0 code?
View 3 Replies View Relatedis it possible to set the dot1x guest-vlan on a Catalyst Switch via ACS 5.2 dynamicly. I want to make MAB with known Devices (FAT-Clients, Notebooks, Desktops, Printers) and unknown Devices.I will set the VLAN dynamicly with dot1x per ACS. For known FAT-Clients, Notebooks etc. it's running well.But for Printers it's more difficult because I have about 500 Printers in several IP-Segments on several Switches and I will not make to much Rules in ACS for Grouping, Mapping and Authority-Rules.My Idea is to set the Guest-VLAN on every Switch, read them with ACS and use this for my Printers.The Problem is that Guest-VLAN is set on more than 100 Switch and this guest-vlan is different on any Switch.Can I read the Geust-VLAN Value so that I can set this via ACS ?
View 4 Replies View RelatedFor some reason, i can't get the lobby "sponsors" to authentication to the Guest NAC server (2.0.2) using ACS 5.2 via Radius.I was able to figure out how to get the Guest NAC Radius Authentication for "Administrator" to work by adding custom Radius value IEFT-6 under...
Policy ElementsAuthorization & permissionsNetwork AccessAuthorization Profiles
I added a policy & under the Radius Attributes Tab... I manually entered an Attribute that looks like the following:
Dictionary Type: = RADIUS-IETFRadius Attribute: = Service-TypeAttribute Type: = EnumerationAttribute Value: = StaticValue = "Administrative"
I then created an Access Policy... I looked for a specific AD group - Result = "Name of Custom Policy Above"...
All of that is working just fine.... the NAC Guest Docs tell you the Radius server must return a value of IETF-6...
When it gets into the Sponsor section, it doesn't tell you the value your Radius server should return... so just for grins, instead of "Name of Custom Policy Above", I tried "Permit Access"... i tried the "Name of Custom Policy above"... Not sure what else to try to get this to work...
here is a like to the document i'm following: URL
Page 68 refers to the "Configuring Sponsor Authentication" for Radius.. it just tell you to add the Radius Server & change the authentication order.
I have a 2960 sw configured for dot1x authentication, the problem is the Guest VLAN and Restricted VLAN didnot work. The switch port was stuck in authenticating status. The server is Juniper IC4500.
View 2 Replies View RelatedI've configured an ACS 5.3 system and all my groups etc fucniton corrcetly both for Network Access and for Device Administration.
However I'm stuck trying to allow clients to authenticate against the router's web-page i.e. Web-Authenticaiton, using TACACS+ between the router and the ACS5.3.
I've looked into this and I need to configure a custom-attribute of "service" with type Outbound and link this to an Authorization policy.
We have insatalled 5 ise 3315 boxes IOS 1.0.4 in our network where in two of them are admin node , two of policy services and one is mnt node. We are using guest sponsor portal for wirless guest user where in we have integrated WLC 5508 with ise and using weblogin for guest users.
We have created open ssid in wlc and using external redirected url of ise for guest login page. But when we create any guest user in sponsor login for guest user we faced following issue
1) When guest user gets conected to wirless and login in to guest portal with credential after putting credential then its again redirect to same login page wihout successful login prompt.
Can we pompt successful login after guest login to guest portal or redirect to any other link like google.com so guest user will gets to know he is able to access internet now
2) We have creted time profile 8hours first login for guest user. When guest user gets connected while putting credential in to guest portal. But we face issue after approximately every 20 mins guest gets disconnected from internet and guest again gets login page of guest portal and if we put same credential then its working but after approx 20 min interval user get disconnected from internet.
I need to know how WLC can support ISE guest management in wireless mode. Tested and confirm by Cisco SE, Knowing that WLC currently does not support dynamic VLAN authorization for central web authentication. This limitation will be addressed in WLC 7.2 when MAB and CWA support is added to the code. On the other hand, DACLs on the other hand works and we can use that to restrict access of this guest traffic.Can ISE support on WLC LWA guest access provision? This able to view guest user login and show at ISE monitoring.
View 1 Replies View RelatedI'm running an ISE 1.1.1 and i need to authenticate guest users.The goal is apply different Authorization profile to the same guest user based on the thevice he use to connect to the guest wlan.
I.E.:
if guest user "user1" connect to the guest WLAN using a windows laptop, than apply "Guest" authorization profile
if guest user "user1" connect to the guest WLAN using an Apple iPad, than apply "Mobile" authorization profile
I've tried to deployed the following 2 authorization policy:
1)if "Apple-Device" and "IdentityGroup:Name EQUALS Guest" then "Mobile"
2)if "Guest" then "Guest"
but the first rule never match and even if I use and iPad to access the guest network the "Guest" authorization Profile is matched
I've verified that the iPad is correctly recognized as an Apple-Device changing for test purposes the rule table in
1)if "Apple-Device" then "Mobile"
2)if "Guest" then "Guest"
I would like to configure a guest-vlan and restricted-vlan on a 2960 switch, but I can not.
I am trying to configure the interface using the following commands: [code] similar result is obtained while trying to configure a auth-fail vlan. the full configuration file is attached.
I cannot sponsor a guest account using his/her email address. When I try to create a guest account, its show as file attached.
For example,
email.m@email-me.co.xx ->>>>>> cannot create
email.me@email-me.co.xx ->>>>>> can create
ISE version 1.1.1.268
Patch version 1
I am configuring 802.1X in a 3560 Switch, my Radius server is a Microsoft IAS, when I connect a station of a guest user, the guest-vlan is not assigned in the port, and I have these logs:
May 8 21:23:02: dot1x-ev:Received an EAP Timeout on FastEthernet0/8 for mac 0000.0000.0000
May 8 21:23:02: dot1x-ev:dot1x_guest_vlan_applicable: Guest VLAN not
[Code].....
I'm setting a Wireless Guest with a WLC 5508 (7.3) and ISE (1.1.2) -- (no anchor).It appears to work (still some adjustments are required), but I found when the guest user log in, it receives the successful login screen and inmediately the guest portal again. If another browser window or tab is open, the user can browse properly.
View 5 Replies View RelatedI am using 802.1x authentication with multi-domain ports; Phone and PC connected to phone. The phones are Nortel (Avaya) and the PCs are Dell/HP Laptops. All are configured for Certificate authentication and this works well. However we sometimes get some ports stuck in Guest mode. when a non certificated laptop connects to a phone port and fails authentication, the data port is placed in the Guest VLAN. However when the laptop disconnects the port isn't reset and remains in the guest state. When a subsequent good laptop connects and attempts to authenticate the switch ignores this and leaves the data port in the Guest VLAN. he switch is a 2960S with Version 12.2(58)SE2 IOS.
The port is configured as follows:
!
interface GigabitEthernet1/0/15
description DANS Port
switchport access vlan 1807
switchport mode access
switchport voice vlan 1855
priority-queue out
[code]....
I placed the AAA, dot1x, eap and auth debug on for all events and then connected a good laptop, the only debug message I got were as follows:
Mar 19 16:17:01.391 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:01.653 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:02.654 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
[code]....
I would have expected the auth function to have reacted to the EAP packets sent by the good client when it connected and performed eap authentication but it didn't, all it did was say the ports in Guest mode and left the laptop in this VLAN.
Why do need Cisco NAC guest server when we have WLC 5508 already configured. The Guest user access can be given by the WLC itself too. We can create users in WLC also and grant access to the user to access internet for specific time frame. My query is - what is so different in Cisco NGS that it is considered good in terms of Guest users access. What are the advatages of NGS.
View 4 Replies View RelatedSo have a wireless guest network on an N600 router. Here is my setup:
pf sense -> untangle -> switch <- N600
the N600 is just an access point and does no DHCP. The primary wireless network gets IP no problem but the guests are not getting an IP. I'm assuming the N600 has no way of issuing an IP on the guest network. how to set a DHCP server on the guest network and have a static route to the pfsense firewall from that network.
i see there is an option to "allow password change" or "force password change" for guest roles in the NGS. But when i created a guest account using this guest role, after webauthentication , there is no prompt to change password. Is this the intended behaviour or is there anything else that i need to configure. Looking at it, i am not sure how the NGS would allow a "guest user" to really overwrite the password by allowing password change. ? is that not a security risk as well for the NGS ? my setup has 5508 anchor controller and NGS communicating via RADIUS.
View 7 Replies View RelatedWe'll be implementing Cisco NAC guest server for Guest Wireless users, ( Model #3310), the question is do we need to configure separate physical interface for User authentication requests( from Wireless ) and a separate Interface for Guest server to talk to AD for SSO?
View 2 Replies View Relatedmy config : one DAP-1522 as an AP + one DAP-1522 as a switch, 6 meters between them, signal strength about 70. Any others wifi networks around my house. both with FW140b03.bin dated 01/14/2011.Most of the time, both work correctly. But time to time, the wifi link is ko. In AP status, the switch is mentionned connected (uptime = 3 hours ...). The red led is blinking on the switch. The administration web of the switch is not available and the link is ko. Unplug and plug power units doesn't fix the problem. I need to reset DAPs.From Dlink experts, i would like to get more description about issues :
- in switch mode, which are the events modifying the red led state ? what does blinking / off led mean ?
- in AP mode, what does "uptime ...STA ...." mean ? frames are periodically received from STA ?
we are using Cisco RV042 router with i guess V3 hardware version, latest driver version (4.2.1.02). We changed the username and password from admin, default, to another name and password. Since then, we are able to log in only once, once the router is restarted. If we leave the page, logout or after several hours after boot, we wont be able to log to web administration again. We enter username, password, submit, the image keeps spinning, but nothing happens.
View 5 Replies View RelatedI have an AP(Cisco Lynksis Wireless G WAP54G) with one port (LAN) on the back, i have tried several time accessing the administration page but in vain. I reseted the AP (holding the reset button within 10 secondes) and try again to access through my internet brower but still having the same issue on accessing the admin page. The main target is to access the admin page and configure settings in order to amplify my signal in some offices away.
View 7 Replies View RelatedRV220W is at firmware v1.0.2.4 From: Administration / Management Interface / Web Accesss I have configured remote Management: Remote Management [x] EnabledAccess Type: All IP addressesPort Number: 8888Remote SNTP [ ] not enabled
From within the LAN side I can connect to the router and administer via https://192.168.3.97:8888
Status / System Summary reports:WAN (Internet) Information (IP4)
Connection Type: Static
Connection State: Connected
IP Address: 207.180.139.242
NAT: Enabled
But from the WAN side (using the same Win7 computer) I cannot connect via: https://207.180.139.242:8888
This used to work. Also not working: PPTP logins. ISP is RCN via cable modem, fixed IPs.
Have tried power cycling router - no luck. Have tried from PC with AV off and Win7 firewall off
I have the router configured for remote admin from the web outside the network however I cannot establish a connection with the router.Other than adding the check mark and selecting a port are there any other considerations for remote admin?
View 12 Replies View RelatedRegion : Australia
Model : TL-MR3420
Hardware Version : Not Clear
Firmware Version :
ISP : Telstra
Is remote administration over 3G connection possible? The telstra public IP is not pingable. (from externally) Goes no where when I put the public IP into a browser. (from externally) Any settings changes to enable this?
We have a rack with a Cisco Catalyst 3750 that is networked with other racks in the data center and uses bandwidth from the data center co-location (which is also an ISP). We had a need to install a Comcast Business Class modem in this rack and want to be able to manage this modem remotely. What I have done so far is.
View 2 Replies View RelatedFirst time user of cisco hardware and we just purchased the 4900m catalyst switch. My question is very general. I am simply hoping to network 3 servers together and I do not wish to do any fancy or advanced configuration. Can I simply use the web management interface for network administration and setup? I just downloaded the Catalyst 4500 Series Switch Cisco IOS software configuration guide and they talk about Cisco View network management system, is this my answer or is this what most people use for basic configuration and administration?
View 3 Replies View Related