We have a rack with a Cisco Catalyst 3750 that is networked with other racks in the data center and uses bandwidth from the data center co-location (which is also an ISP). We had a need to install a Comcast Business Class modem in this rack and want to be able to manage this modem remotely. What I have done so far is.
View 2 RepliesMy neighbor is using my Belkin Router the basic one and has comcast. We both use his internet and have had no problems until the past 3 days. He just got the home phone service from comcast and the phone line is setup through the modem. Ever since comcast came to his apartment and set this up the home phone service to his modem the router is connected but there is no internet access. What is going on and how can I fix this. He has an HP with windows Vista and I have a Toshiba Satellite L675 that has Windows 7 Home premium edition on it.
View 1 Replies View RelatedEvery day for the past week my Internet access goes down. I have a netgear router connected to Comcast modem. I have to reset the modem then the router constantly and it gets irritating. I called comcast and they say reset them. But why should I have to constantly reset.... Sometimes I just ignore it and it comes back up later... what is going on??
View 1 Replies View RelatedI want to use LDAP accounts to administrate switches.It works fine when I use telnet. I just need to push RADIUS attribute Login-Service (ID 15) with Telnet value (ID 0) Now, I want to use SSH (for security reasons )RADIUS have to push RADIUS attribute Login-Service (ID 15) with SSH value (ID 50)(For example with Steel-belt RADIUS [URL] SSH value doesn't exist in RADIUS IETF dictionary for Login-Service attribute.I can't create SSH value because this dictionary is protected...
View 2 Replies View Relatedmy config : one DAP-1522 as an AP + one DAP-1522 as a switch, 6 meters between them, signal strength about 70. Any others wifi networks around my house. both with FW140b03.bin dated 01/14/2011.Most of the time, both work correctly. But time to time, the wifi link is ko. In AP status, the switch is mentionned connected (uptime = 3 hours ...). The red led is blinking on the switch. The administration web of the switch is not available and the link is ko. Unplug and plug power units doesn't fix the problem. I need to reset DAPs.From Dlink experts, i would like to get more description about issues :
- in switch mode, which are the events modifying the red led state ? what does blinking / off led mean ?
- in AP mode, what does "uptime ...STA ...." mean ? frames are periodically received from STA ?
I'm looking to upgrade my SB-5100 Motorola Cable modem that I now rent from Comcast. My main objective is to increase my internet performance.
View 1 Replies View RelatedWe have recently upgraded the software on our two WLC 4404 from software release 4.0.xxx to 4.2.xxx to 6.1.199.4 and lastly to version 7.0.98.0.
We could access the WLC's GUI's using https when it was on version 4.0.xxx. When we did the upgrades from version 4.2.xxx to 6.1.199.4 we couldn't access the Admin page through https anymore but only through normal http. We enabled https through the GUI and through the CLI and we did do the re-generation certificate , without any success. We then upgraded to version 7.0.98.0 and we still have the same result , cannot access Admin GUI through https.
I cannot get my computer to recognize my Netgear WNR1000. I have called Netgear to explain the issue and was on the phone with them for 45 minutes.They did get the laptop to work but my desktop still does not. They told me it was a browser error. If I disconnect the ethernet cable from the router to my computer everything works perfect.I tried to reinstall the CD that came with the router and as I try to get through step 2 it says no router detected.I think this is my hold up but I have no way to know how to fix this. I tried to go on the Netgear website and they tell me that I have to be able to connect to the internet to download through the router. Well I can't do that because obviously that is the hangup. If I click on my Network Connections. It shows my computer connected to a Network with limited capability and then a big red X going to the internet.
View 3 Replies View RelatedJust got home from the Comcast store with a $7 rented modem just to last me until I do research and purchase one. I realize that this modem has only one Ethernet port with no WiFi support so I have another PC and a laptop sitting idle because there's no internet access. Did a quick search using Comcast's authorized modem's list and all of them only have a single Ethernet port and no WiFi. Is there a modem with multiple Ethernet ports with built in WiFi? I am getting almost 20mbps with a download speed of 4mb/s which is a HUGE improvement over my ATT DSL service that I've had since forever at 3mbps with a download speed of 300kb/s. I have no idea what technical specifications to look for in a cable modem to get 100% of full potential speed from my service without disconnects or other various problems.
I have a ATT U-Verse router sitting here right now, I am wondering if I can somehow connect it to my Comcast modem. I tried to connect the ATT router into Comcast modem via Ethernet cable, but I couldn't get past the "Your DSL service is unavailable" in the browser, but in my desktop system tray, it shows I am connected to the internet. If I could use this router, I would rather spend money on a modem instead of getting a combo.
Life was great with my DIR-615 and Motorola Surf Board SB-5100 cable modem, but my D-Link refuses to recognize the Internet signal from the Thomson. The Comcast guy spent an hour trying to get it to work, but I'm stuck watching MLB.tv on a 24" monitor in a stiff office chair in my study, instead of on a 47" LCD in my living room. How can I force the DIR-615 to accept the Thomson ACG905? If you advise me to check settings or manually change them, please do not "assume" that I know how to access those settings.
View 6 Replies View RelatedI have a comcast business class cable modem and am trying to connect it to my cisco 2821 to route only certain types of traffic.
View 3 Replies View RelatedMoved into a home that has a wiring closet in the basement. Typical wiring closet setup, Cat 5 cables and Coax cables from the house outlets terminate there. There is a Suttle sam v8m voice distribution module installed. Looks exactly like the one in this user manual:Page 5 of 8, Wiring Diagram.URL,However, there is NO Sam D8 switch below installed in the wiring closet. The Cat 5 cables from the home outlets enter the wiring closet and plug directly into the Sam V8m.Can a comcast modem be connected to the Shuttle Sam V8m to make the Cat 5 outlets hot? Or, does the Sam D8 (or similar) need to be installed?
View 4 Replies View RelatedOur small business just moved into a new building and I am in charge of setting up the network infrastructure. I am not new to computers or networking but I have never had to deal with this set up before.
Our current set up.We have a cable modem from comcast that has the Coax cable connected to it.The modem has 4 ports on it. The ports are connected to a built in 24 port switch that was already in the building. The switch has it's ports connected to outlets in the walls. Currently we have 4 computers on our network and since the cable modem had 4 ports it worked fine.
What we need? We will have another person join our office so I will need to activate one additional port on the switch that already exists. However, since all 4 ports on the modem are already taken, I have no way to add an additional port. They also want us to get wifi in the building.How I think I have to solve the problem (most likely wrong).I have to get another switch (like 8 port) and connect the cable modem to the switch using a cross over cable (if there is no designated internet port). Since I have the modem connected to the switch, I will have to move the 3 remaining connections to the switch.
Then I connect the 4 remaining ports on the switch to the existing 24-port switch that is already there. I will use one of the outlets in the building to connect an AP for Wi-Fi for better signal. Currently the modem and switches are hidden in a closet away from the office space and would mess up the signal.
I hav a laptop conecteted to the internet with comcast service and a netgear wireless router that works fine. but bought a desktop and when i hook it to the router i get no internet. im running windows 7 ultimate on both machines. i am gettin a thing saying unidentified network in my network settings and i called comcast whent through resetting the modem and router with them and nothing then they tell me i have to pay them to run another machine of of my router this is ridiculas i have the machine pluged into the port on the router with anethernet cable everything is hooked up right i know this im pretty computer savy as ive built many machines in the past.
View 1 Replies View RelatedI switched to xfinity and I really don't feel like renting their gateway for $7 dollars a month. Gateways are crap anyways. So do any of you know of a good router and modem that can be paired up to work well with xfinity and has good speed?
View 1 Replies View RelatedWe have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.
Here's the equipment I'm working with:
DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U
I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.
I bought this wonderful voice gateway off the internet from someone. So not sure if they ever used it with Comcast.So far I hatve had no internet once I plug it to the cable. I have asked Comcast tech for activating this device. However they say it is not supported and they have tried sending it the Activation signal but they say it fails. I can see all lights lit up and go green when I connect this device to the cable, is there a firmware upgrade for DPQ3925 ?
View 2 Replies View RelatedI've got a ASUS AC66 router plugged into my Comcast cable modem (regular dumb modem), it's running the Merlin (OEM-modified) firmware.I've got a Netgear 3400 router flashed with DD-WRT (latest build), it's a replacement for another N router that died on me.
Anyways, I went to set client bridge like always. Main router is 192.168.1.1 so I set DD-WRT router as 192.168.1.2, set the wireless modes to client bridge with matching SSIDs for my 2.4/5GHz radios, input the correct security keys on the security page (AES), then I put the router in router mode (from gateway) Basically, I followed the instructions on DD-WRT's website, which worked perfectly until the other router died.
This time around as soon as the DD-WRT router reboots with its bridge information saved it immediately causes some sort of conflict on my network and kills the internet and all network connections. All devices lose their IP address. It's like the DD-WRT router is somehow shutting down the network and my default router.
how I can setup two separate networks on a Westell 327w modem/router. I know this question has been asked to death and I've utilized the search function, but I still don't know how to make this work. I have a computer that I plan on using for important business and my sibiling has my other computer that he uses for gaming and downloading stuff. His computer is connected wirelessly to the Westell 327w. My computer has no internet access at this point. I would like to have both connected wirelessly to the internet, but keep them completely separate and as secure as possible, as he downloads some questionable things.
View 1 Replies View RelatedI have an RVS4000 V1 router connected to a Comcast Extreme 100 mbps cable modem.The port setting for the port (number 4) is 1000Mbps Full Duplex, auto Negotiate.why the RVS4000 is throttling the port?
View 3 Replies View RelatedI have a need to have 2 seperate networks from my comcast cable modem.I was hoping to plug a 5 port hub into the cable modem and then plug both the wrt610n and the wrt54g into the hub. Seem that only one of the routers will get an ip assigned from Comcast.Is there a way to have one ISP cable modem and create two different home networks with the two linksys routers, thus two separate independent networks?
-Network 1: public household use and family (Jane's wireless laptop, household PC's etc).
-Network 2: private household/company use and separate from the public family network (company wireless laptop/company PC, un-secure media server).
I have an ARRIS Docsys3 modem from Comcast which has a built in WiFi router. I also have a DIR-655. The Modem is in my office and I have a 100' Ethernet cable running through my attic to my front room where the dir-655 is located.
I use the DIR for WiFi as well I have it connected to my TV and Xbox.I use the ARRIS Modem for WiFi as well I have it connected to another Xbox and a Desktop computer.I want to have everything on 1 network, Dir-655 uses IP address 192.168.0.1-100 and the ARRIS uses ranges 10.0.0.1-100. I want to be able to connect to the dir-655 and have the IP for that connection join up with the 10.0.0... network so that I will be able to transfer files freely throughout the network.
I want everything on one network. Right now when I connect a laptop to the DIR-655, I can not access the printer that is connected to the Desktop on the ARRIS modem. I have to connect to the ARRIS modems WiFi to then use the printer on the desktop.Likewise, I want to use the media extender on the Xbox connected to the DIR-655 with the Desktop connected the the ARRIS modem, but I can not because of the to different networks.
We are a small office currently running a regular network (9 wired, 2 wireless) and also using the "guest" feature (7 wireless) on a Linksys E2000. We have a switch to connect our wired equipment to the E2000. If "A" is our regular network, and "B" is our guest network, is it possible to have 2 routers on 1 cable modem and still prevent network "A" from seeing Network "B" and vice versa?? We are looking to do this because we will soon be exceeding the maximum guest users (10) allowed by the E2000. We have another Linksys router in storage, I think it is a WRT54G, that we would use if this is possible.
View 1 Replies View RelatedComcast had us unplug our modem in order to upgrade to their new faster speed. now our wireless router won't work. We've reset the router twice. we can set up the wireless network but we cannot connect to it. The connection last for about 5 minutes and then we get an error, cannot read IP address. Comcast says it is not their problem and linksys says they can't assist either.
View 1 Replies View RelatedHard wired network (15 workstations.) I had a dsl modem connected to my network switch and linksys wrt54gs router connected to that modem. All hard wired workstations had internet access AND there was a wireless internet connection. With any wifi device I could access the internet.I switched from dsl to comcast. All hard wired work stations still have internet. but when I plug my wireless router into the modem (comcast business IP gateway) there is no wireless internet connection. The hard wired workstations can still get online and there IS a wireless network, but it does not allow internet access (page cannot be found etc.)
Comcast says it absolutely should work. Linksys says it requires simple reconfig of router settings (reset router, clone mac address.) I have read knowledge base articles from linksys and followed each step. The lan ports of the modem are all working if I connect to them directly with a laptop and cable. I have reset router multiple times, cloned mac address, dhcp release/renew.
My physical connections are correct. In the router set up utility, I can see the mac adrdress and ip address but can't tell if the IP is from the modem or the router. Default gateway is always 192.168.1.1 in the router AND in any workstation ipconfig screen. Ip addresses are 192.168.1.xx in ipconfig at any workstation AND in the router set up status.
I cannot access internet via router even if plugged directly into it. It is as if the router is not getting the correct information from the modem. However, it worked perfectly with the DSL modem the day before we changed.My workstations are all hard wired and work. I simply want to have Wi-Fi also... for phones and laptops w wireless etc.
Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
I disabled the ability to change settings using wireless connection on both routers.
We have 2 separate networks here, 1 for data (192.168.0.x) and 1 for VOIP phones (192.168.3.x).
I need them to both be connected to different ports on a switch (Cisco SG 300 10 port managed switch) which is then linked to another switch (Cisco Catalyst 2960 48 port switch). Then on this 2960 switch I want the link to be split back into the 2 separate networks. I think that I need to create 2 separate VLANs and assign them to different ports.
Created 2 separate VLANs on SGE2010P switch. Neither in Native VLAN 1.
For example;
-Port g01 in VLAN 56
-Port g25 in VLAN 56
-Port g10 in VLAN 10
-Port g37 in VLAN 10
All appears to work well within the respective VLAN (i.e. DHCP, ARP, etc. no IPs from other VLANs)STP - Spanning Tree is Globally disabled.
However; when I feed a n new network (which has STP enabled) into VLAN 10; I then plug a laptop with wireshark running into VLAN 56 - cannot see any other traffic/packet...except STP packets coming from a CISCO device on VLAN 10 while I am plugged into VLAN 56.
This demonstrates to me the network is not truely seperated. I know this because last night I crossed two networks and caused havoc; ouch.I configed a D-Link switch with the same scenario and no issue.
I have to configure failover Active/Standby on my ASA 5510.I am wondering how i could do for the outside interface, i mean, actually the ASA1 outside interface is linked directly to our Internet router.So now if i have to add ASA2 connecting to that router i will need a switch between them.I have already a switch for DMZ & LAN.The thing is that i will have to allow 3 switchs ports to communicate with each others.
- 1 for ASA1--outside
- 1 for ASA2--outside
- 1 for Internet router
How could i isolate these 3 ports to make them communicate alone ? Should i use VLAN for that ?And if i use VLAN, will this require to make any change of configuration on my firewalls (ASA1 & ASA2) outside interface ?I am a bit lost with this, if i am correct i will not have to do some "vlan tagging" on the firewall itself ?
I've switched internet provider from Verizon DSL to Comcast cable just a month ago. Since that time my wife can no longer connect to her work email? I've call comcast many times since the only thing that changed was provider? This is the error I get now
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
I've tried explorer and taken down the firewalls, I had her school IT person remote access to my computer to see if it is on their end...still she can't connect. We can access from other computers (my work) but still not on my home computer (windows vista) Comcast now tells me not there problem since I can connect to internet? I've also changed my norton protect to AVG to see if that was an issue..
i have computer A with 2 NICs.... NIC 1 has ip 192.168.x.x which has access to internet and NIC 2 10.0.x.x which as access to server files and other docs....i have computer B with ip 192.168.x.x but want to be able to access 10.0.x.x using computer A as a router is this possible and how do i go about doing that. i was thinking about bridging NIC 1 and NIC 2 adding static route on computer A and adding a second ip 10.0.x.x to computer B NIC (i know it is possible to add 2 ips on one NIC in windows) so i can have access to the file server...is what i mention possible
View 1 Replies View RelatedI have two separate network with their own internet access as shown below I want to keep all setting of the left network unchanged. I can change the IPs and setting of the right side network.I want to be able to access all devices of the two network from my computer but in the same time the two network work as usual with no problems ( the same when they are sperate).One option is to set the LAN of modem 2 to 192.168.2.2 and connect one of the LAN port to LAN port of the Mkrotik router. Set the WAN of my private home router as
IP: 192.168.2.100
subnet mask: 255.255.255.0
gateway: 192.168.2.2
Home router LAN: 192.168.3.1
Is their another method to connect the two network and keep the same setting for the network on the left side?
I want to share one broadband connection between network A 192.168.1.xxx and network B 192.168.0.xxx. Network A is SBS 2008 while B is Linux with static IPs.
View 5 Replies View Related