Linksys Wireless Router :: E2000 Separate Networks On One Modem / Two Routers
Feb 27, 2012
Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
I disabled the ability to change settings using wireless connection on both routers.
View 9 Replies
ADVERTISEMENT
Mar 29, 2012
how I can setup two separate networks on a Westell 327w modem/router. I know this question has been asked to death and I've utilized the search function, but I still don't know how to make this work. I have a computer that I plan on using for important business and my sibiling has my other computer that he uses for gaming and downloading stuff. His computer is connected wirelessly to the Westell 327w. My computer has no internet access at this point. I would like to have both connected wirelessly to the internet, but keep them completely separate and as secure as possible, as he downloads some questionable things.
View 1 Replies
View Related
Feb 5, 2012
We are a small office currently running a regular network (9 wired, 2 wireless) and also using the "guest" feature (7 wireless) on a Linksys E2000. We have a switch to connect our wired equipment to the E2000. If "A" is our regular network, and "B" is our guest network, is it possible to have 2 routers on 1 cable modem and still prevent network "A" from seeing Network "B" and vice versa?? We are looking to do this because we will soon be exceeding the maximum guest users (10) allowed by the E2000. We have another Linksys router in storage, I think it is a WRT54G, that we would use if this is possible.
View 1 Replies
View Related
Mar 3, 2013
I want to connect 2 routers like this picture.No need to have it as separate networks.
View 3 Replies
View Related
Jul 31, 2012
I have two dir655 routers that are connected. The second router is not setup as a wireless access point, but I am open to that if it will work. The second one is going to serve as a public wifi in a business, with a separate SSID. The first one is going to handle the local business network, with its NAS and printers. How would I prevent the public wifi from accessing the first router?
I have tried the guest wifi partition setting, however it still allows access to the lan devices on the first router. It does partition with the second router properly though, but thats not worth anything to me cause there are no lan devices on the 2nd router.
Would it work right if I turn the 2nd router into a access point, disable the dhcp server, and set it up with the guest wifi partition?
View 19 Replies
View Related
Aug 30, 2011
I am using a E2000 connected to a DSL modem via the internet port. My modem is able to connect at gigabit speed but it doesn't seem to be the case with the E2000. All other ports are running at gigabit speed without problem. Is there any parameter that can be modified or is it a router limit?
View 2 Replies
View Related
Nov 7, 2012
I just received a new modem from my ISP acanac, the modem model is NetVito5300.When I connect the modem directly to my computer, I can access the internet, but if I connect through my wireless router, there's no wireless internet access. Wireless router model is CISCO Linksys E2000.I tried to download Cisco Connect Setup Software for PC and followed the step until one point it asked for my wireless username and password and I put them in correctly but it said my router was not successfully set up and failed. I should press the reset button and set the router to factory default mode, but I'm afraid I won't be able to set it up properly after doing so.What should I do to connect my new modem and wireless router properly so I have wireless internet access?
View 6 Replies
View Related
Dec 25, 2011
So my family has an E2000 setup near the modem in a room that litterally is a DEADZONE, signal bearly gets in or out of this room. I've argued until I was blue in the face that we ned to rewire the internets inlet to the house in to another room that isn't a deadzone and rune a router from there.They IT disadvantaged refused. We have also an E2500 they say hook it up, maybe it will work better (when your in a concrete and mettal room with a router sitting on a shelf surrounded by book and with a corless phone system hooks up and sitting on top of it... its jsut not going to work. is there a way i can take the E2500 and make it an access point for the E2000?
I figure if I can I would take the E2500 and put int in a better location and jsut have it relay the E2000 internet. Because of the IT limited thought process of most of the people living here I'd prefer that they share the same SSID or atleast make for a simple transition for the apes I live with.
View 6 Replies
View Related
Jan 23, 2012
I bought an E2000 router with modem Dlink DSL-320B in PPPoA mode. I have already spent much time for to configure the router with-out any positive feedback . I've selected Automatic configuration with dhcp , static ip 192.168.1.2 and dhcp and modem with 192.168.0.1 and dhcp . If i view the status windows (internet connection) in router i see the right address for gateway and internet Ip , but is not allow to navigate by other PC linked with internal switch of E2000. Do you Know some particluar set-up for PPPoA mode ?
View 5 Replies
View Related
Jan 29, 2013
I have a network set up between two buildings. Each building has its own internet connection and DHCP server, building A using an RV180W router and building B using a linksys product. A WDS bridge has been set up between the two buildings using two wireless access points.The goal here is to allow clients in either building to be assigned an IP from their respective DHCP server (and thereby use that building's internet connection), yet still access network resources (eg file storage, printer, etc.) in the other building should the need arise.I have tried to set this up by having the RV180 assign IP's in the range 192.168.0.xxx to its clients in building A, and the linksys to assign IP's in the range 192.168.1.xxx in building B. I have enabled Vlan 1 and Vlan 2 on the RV180 - vlan 1 runs a DHCP server for building A. Vlan 2 runs no DHCP server and is directly connected to the WDS bridge to building B. Inter Vlan routing is enabled on both Vlan 1 and Vlan 2.On the WDS bridge modules, ive assigned both static IP's in the 192.168.1.xxx range (vlan 2 range). I've specified their dns and default gateway as 192.168.1.2 which is the static address for the RV180 in vlan 2.From a PC in vlan 1, I can ping and access the webgui for the WDS bridge modules which are in Vlan 2. However, i cannot ping any other computer in Vlan 2 which is set to accept a dynamic IP from the DHCP server operating in Building B. I assume this is because the WDS modules point to the RV180 as their default gateway and dns server, while the clients that have accepted a dynamic IP from the building B DHCP point to that device as their default gateway and DNS.I am considering trying changing the DNS and default gateway on the building B side of the WDS bridge to the building B values to see if that works, but am concerned i would lose all connectivity to the webgui from building A if i do that.
View 7 Replies
View Related
Aug 15, 2012
I'm an architect working in a small office that happens to be home to two seperate businesses, each with their owner network. However, these two networks want to use the same large format printer. I recently purchased the RV180W since the Cisco representative told me i would be able to connect both networks to the router so they can both see the printer without seeing the files on each of the other networks. We simply want to share the same printer.
Network 1:
192.168.4.1
Network 2
192.168.2.1
Large Format Printer
192.168.4.151
Network 1 has the RV180W as it's router with three gigabit switches. Computers and peripherals are connected to the three switches. 1 port open on the last switch.
I want to configure the RV180W to see both 192.168.4.1 and 192.168.2.1
What settings need to be modifed in order to accomplish this? Do I need more equipment? Is it easier to put a wireless card in one of the computers on the 192.168.2.1 network and then set it to see the 192.168.4.1 network?
View 3 Replies
View Related
Jun 10, 2011
I recently switched from dsl to cable. I have a e2000 router that I would still like to use. The modem I have is a Motorola Surfboard SB6121. It has no options that I can modify. The modem has a built in DHCP server. However, I can't modify it and I don't like the ip configuration it uses. For the time being I have the modem connected to a switch which is working fine. What I would like to know is how to configure the e2000 to use the modems connection. I used PPPoE for DSL and had login information.
View 2 Replies
View Related
Dec 12, 2012
I am trying to set up two routers so that I can offer free wireless connectivity via three AP's in three adjoining rooms on a first floor and secured wireless and wired network connectivity in upstairs offices. The setup is like this:
Verizon DSL connectivity..static IP
The gateway modem/router is a Verizon DLink DSL 2750B with three ports connecting to three wired Access Points in three first floor adjoining rooms, and the 4th port connecting to a Cisco E1200 (wireless and ethernet router) located next to the Verizon Dlink. I would like the Verizon DLink to give open wireless connectivity via the access points and also connect to the adjacent E1200 router.
I would like the Cisco E1200 to offer secured wireless and ethernet connectivity to the upstairs offices. (connecterd to the Cisco E1200 is a 24 port Netgear switch.)I have spent considerable time talking with Verizon and Cisco/Linksys but have not been successful in just how to set this up.A former tech actually did have this setup but for what ever reason the settings were reset to factory defaults with no written record as to the necessary settings.
View 4 Replies
View Related
Jan 12, 2010
I have a need to have 2 seperate networks from my comcast cable modem.I was hoping to plug a 5 port hub into the cable modem and then plug both the wrt610n and the wrt54g into the hub. Seem that only one of the routers will get an ip assigned from Comcast.Is there a way to have one ISP cable modem and create two different home networks with the two linksys routers, thus two separate independent networks?
-Network 1: public household use and family (Jane's wireless laptop, household PC's etc).
-Network 2: private household/company use and separate from the public family network (company wireless laptop/company PC, un-secure media server).
View 7 Replies
View Related
Mar 15, 2011
Hardware: Modem-Motorola SBV5222 Router-Linksys E2000(Cisco brand name? I didn't buy the router) I use a PC with windows xp with sp 2 and 3 installed.Problem: I can use the internet just fine when I am connected to the router, my pc is connected directly to the router via cat 5 but when I directly connect to the modem I get limited to no connectivity. I'm not using a proxy server and before the router was set up(I live with roommates who set up the wireless network.) I could connect to the modem just fine. I can't repair the connection since it seems to be unable to renew the ip address. I've also tried to manually configure my ip address though I'm sure it wasn't the issue.I've racked my brain to think of a simple solution and it doesn't seem one is apparent and I'm almost sure it's something to do with xp and I'm not so great with software.
View 4 Replies
View Related
Oct 24, 2011
With traditional classful subnetting, the same number of host bits is used to designate the subnet ID for all the resulting subnetworks. This type of subnetting always results in a fixed number of subnets and a fixed number of hosts per subnet. For this reason, this is known as fixed-length subnetting. The decision about how many host bits to use for the subnet ID is a big planning decision. There are two considerations when planning subnets: the number of hosts on each network, and the number of individual local networks needed. The table for the subnet possibilities for the 192.168.1.0 network shows how the selection of a number of bits for the subnet ID affects both the number of possible subnets and the number of hosts that can be in each subnet. One thing to keep in mind is that in all IPv4 networks, two host addresses are reserved: the all-0s and the all-1s. An address with all 0s in the host portion of the address is an invalid host address and usually refers to the entire network or subnetwork. An address with all 1s in the host portion is used as the local network broadcast address. When a network is subnetted, each subnet contains an all-0s and an all-1s host address that cannot be used for individual host addresses.
View 2 Replies
View Related
May 1, 2011
I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.
View 2 Replies
View Related
Sep 14, 2012
how do i create 2 networks using 1 cable modem and 1 router and i would like to add a firewall thinking of using xywall usg20 for the firewall..... the issue is i have a small business with 1 point of sale and1 back office computer.(network1) and i would also like to use an air port wifi to offer wifi to my cleints on a seperate network(network2) not allowing access to network1 and i want a firewall on network 1 to protect the back office and pos system
View 4 Replies
View Related
Feb 5, 2012
I would like to set up two separate networks from one internet connection(modem), with the goal being to have a public network(Network A) that would have a small server on it, and then having a second secured network(Network B) that would have my personal computers on it. And both networks having connection to the internet. (The idea being that if the server somehow became compromised that my personal computers and their data would be safe)I have done some research and found that many people claim this can be done with just two or three routers, but none of them go into any detail about how to configure the routers. Below are the physical setups of the two options that I have come up with in my research, which if either would you recommend? And how would I configure each of the routers?
--------------
Modem/router 1 (Network A public)
--Internet-in WAN port
--port 1 to WAN of router 2-------------l
--port 2 server
[code]...
View 2 Replies
View Related
Sep 12, 2012
I have two subnets at my home and both run through my Cisco router. One is my private LAN with access to the Internet, ie your standard home network. The other is a semi-public network that I share with friends through an encrypted GRE tunnel system(DMVPN) over the Internet. I have a server on that semi-public network and I can access my friend's servers from my server, but not from my main PC on my private network.
Is there a way I can access both networks from only my main pc using two nic's?
View 7 Replies
View Related
May 12, 2012
my dlink dsl-520b dls modem is using 192.168.1.1 and is plugged into the WAN port on my dlink wireless router.the wireless router is 192.168.0.1. (these are both in the main building which is remote from my shop).Then i have a netgear wireless access point This spreads the signal properly, and I can get connectivity on all my computers -although i do have to specify a default route on the computers on my shop side of the access point.I noticed that the internet light on my modem is red which indicates no internet connection. I am still able to access the internet fine, but i would like to be able to log into the modem from my network. I was able to do this before by setting a computer with a netmask of 255.255.0.0.
View 6 Replies
View Related
Apr 26, 2011
I have two separate network with their own internet access as shown below I want to keep all setting of the left network unchanged. I can change the IPs and setting of the right side network.I want to be able to access all devices of the two network from my computer but in the same time the two network work as usual with no problems ( the same when they are sperate).One option is to set the LAN of modem 2 to 192.168.2.2 and connect one of the LAN port to LAN port of the Mkrotik router. Set the WAN of my private home router as
IP: 192.168.2.100
subnet mask: 255.255.255.0
gateway: 192.168.2.2
Home router LAN: 192.168.3.1
Is their another method to connect the two network and keep the same setting for the network on the left side?
View 2 Replies
View Related
Feb 9, 2012
I am trying to make 2 COMPLETELY seperate networks with only 1 internet connection. We have routers, switches and all that. But we need to know how to set it all up. there are 2 companies in the same office, each company needs their own network at which they can view eachothers files but in no way view the other networks files.
View 1 Replies
View Related
Oct 3, 2012
I'm new at this stuff and very stumped. I have one WAP with multiple SSIDs that support VLAN ID (for a private and guest wireless network) and a managed switch that supports tag or port based VLAN ID. How do I set up the switch so that the networks are separate, but can still reach their own routers to get on the Internet? In case details are necessary, the WAP is a Cisco Aironet 1130AG and the switch is a Netgear FS750T2
View 14 Replies
View Related
Oct 20, 2011
I want to share one broadband connection between network A 192.168.1.xxx and network B 192.168.0.xxx. Network A is SBS 2008 while B is Linux with static IPs.
View 5 Replies
View Related
May 7, 2012
1. I currently have a Comcast Business Class Gateway, Cisco 2100 Series WLAN Controller and a Cisco ASA 5505 all connected together to supply LAN and WLAN internet connections on my network.
2. I also have a Card Access Security System on it owns network. It currently does not have internet access.
I would like to put my security system on the internet so that I can support it remotely. To do this, it has to be on a firewalled internet connection.Can I put the two networks on my ASA 5505 and keep them seperate? I don't want to provide a path into the Security System through my current LAN & WLAN. But I do need a frewalled internet connection on my Security System. I am trying to avoid purchasing a seperate firewall.
View 1 Replies
View Related
Sep 1, 2011
We have 2 separate networks here, 1 for data (192.168.0.x) and 1 for VOIP phones (192.168.3.x).
I need them to both be connected to different ports on a switch (Cisco SG 300 10 port managed switch) which is then linked to another switch (Cisco Catalyst 2960 48 port switch). Then on this 2960 switch I want the link to be split back into the 2 separate networks. I think that I need to create 2 separate VLANs and assign them to different ports.
View 2 Replies
View Related
Jan 19, 2013
We have a two separate businesses in the same building who will both need access to shared resources and the same internet connection. They will need to remain on separate subnets and cannot communicate directly to each other. The current switch is a Cisco ESW-520-48P and we are looking at purchasing an SG-300-20P for the new business moving in. Heres how we envisage setting it up:
ESW-520 will host Company A's network. Workstations, servers etcSG-300 will have two VLANS. VLAN1 will host all Company B's network. Workstations, servers etc. VLAN2 will host the shared resources such as printers. The internet gateway is a UNIX based system with 3 NICS. 2 NICS are taken up by ADSL connections while the other NIC is the LAN, which would connect to VLAN2 on the SG-300. We would like to define which ADSL connection to route through depending on which subnet traffic is originating. The ESW-520 will need access to the shared resources and internet gateway on VLAN2 on the SG-300.
View 4 Replies
View Related
Aug 23, 2011
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies
View Related
Mar 15, 2012
I am sharing media from my Linksys E3000 router and would like to use subtitles (in separate files) for movies. It is working when I am using Samsung PC based AllShare server but not while using E3000 UPnP server. On the other hand I found some info on the web that Twonky should support subtitles. But maybe different version then embedded into E3000.
View 4 Replies
View Related
Aug 21, 2011
I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).
View 9 Replies
View Related
Apr 11, 2012
I set up my new EA4500 last night, and configured the 5Ghz and 2.4Ghz bands with separate SSIDs (as recommended). While I can see the 2.4Ghz band with all of my devices, I cannot see the 5Ghz band with any of them.I followed the advice given (including the settings shown) on the EA4500 FAQ.Title: Personalizing and connecting to the 5 GHz wireless band on a Linksys Wireless-N routerArticle ID: 21466.Did that *multiple* times, and still nothing. I do have a dual-band capable adapter (Netgear RangeMax WNDA3100 Dual Band Wireless-N Adapter) that I know works on 5Ghz (because I had it working on my old dual-band WDNR3700v1). Similarly, I have PCs sitting less than 20 feet away that were previously able to see the 5Ghz band on my old router, but are now unable to see it on the EA4500.
View 9 Replies
View Related
Jan 6, 2011
Our office is set up with one desk top and at least two (occasional) laptops, one HP C6180 'all-in-one ' printer, and a Cisco Linksys E2000 router. Internet access for all computers seems OK, but printer seems to only print from one computer, and is inconsistant as to which one it will be. Have tried to shut down then restart printer. Have tried to disconnect and reconnect router, sometimes works, sometimes doesn't.
View 1 Replies
View Related
