1 PC Accessing Two Separate Networks?
Sep 12, 2012
I have two subnets at my home and both run through my Cisco router. One is my private LAN with access to the Internet, ie your standard home network. The other is a semi-public network that I share with friends through an encrypted GRE tunnel system(DMVPN) over the Internet. I have a server on that semi-public network and I can access my friend's servers from my server, but not from my main PC on my private network.
Is there a way I can access both networks from only my main pc using two nic's?
View 7 Replies
ADVERTISEMENT
May 1, 2011
I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.
View 2 Replies
View Related
Feb 5, 2012
I would like to set up two separate networks from one internet connection(modem), with the goal being to have a public network(Network A) that would have a small server on it, and then having a second secured network(Network B) that would have my personal computers on it. And both networks having connection to the internet. (The idea being that if the server somehow became compromised that my personal computers and their data would be safe)I have done some research and found that many people claim this can be done with just two or three routers, but none of them go into any detail about how to configure the routers. Below are the physical setups of the two options that I have come up with in my research, which if either would you recommend? And how would I configure each of the routers?
--------------
Modem/router 1 (Network A public)
--Internet-in WAN port
--port 1 to WAN of router 2-------------l
--port 2 server
[code]...
View 2 Replies
View Related
Mar 29, 2012
how I can setup two separate networks on a Westell 327w modem/router. I know this question has been asked to death and I've utilized the search function, but I still don't know how to make this work. I have a computer that I plan on using for important business and my sibiling has my other computer that he uses for gaming and downloading stuff. His computer is connected wirelessly to the Westell 327w. My computer has no internet access at this point. I would like to have both connected wirelessly to the internet, but keep them completely separate and as secure as possible, as he downloads some questionable things.
View 1 Replies
View Related
Apr 26, 2011
I have two separate network with their own internet access as shown below I want to keep all setting of the left network unchanged. I can change the IPs and setting of the right side network.I want to be able to access all devices of the two network from my computer but in the same time the two network work as usual with no problems ( the same when they are sperate).One option is to set the LAN of modem 2 to 192.168.2.2 and connect one of the LAN port to LAN port of the Mkrotik router. Set the WAN of my private home router as
IP: 192.168.2.100
subnet mask: 255.255.255.0
gateway: 192.168.2.2
Home router LAN: 192.168.3.1
Is their another method to connect the two network and keep the same setting for the network on the left side?
View 2 Replies
View Related
Feb 9, 2012
I am trying to make 2 COMPLETELY seperate networks with only 1 internet connection. We have routers, switches and all that. But we need to know how to set it all up. there are 2 companies in the same office, each company needs their own network at which they can view eachothers files but in no way view the other networks files.
View 1 Replies
View Related
Oct 3, 2012
I'm new at this stuff and very stumped. I have one WAP with multiple SSIDs that support VLAN ID (for a private and guest wireless network) and a managed switch that supports tag or port based VLAN ID. How do I set up the switch so that the networks are separate, but can still reach their own routers to get on the Internet? In case details are necessary, the WAP is a Cisco Aironet 1130AG and the switch is a Netgear FS750T2
View 14 Replies
View Related
Feb 5, 2012
We are a small office currently running a regular network (9 wired, 2 wireless) and also using the "guest" feature (7 wireless) on a Linksys E2000. We have a switch to connect our wired equipment to the E2000. If "A" is our regular network, and "B" is our guest network, is it possible to have 2 routers on 1 cable modem and still prevent network "A" from seeing Network "B" and vice versa?? We are looking to do this because we will soon be exceeding the maximum guest users (10) allowed by the E2000. We have another Linksys router in storage, I think it is a WRT54G, that we would use if this is possible.
View 1 Replies
View Related
Mar 3, 2013
I want to connect 2 routers like this picture.No need to have it as separate networks.
View 3 Replies
View Related
Oct 24, 2011
With traditional classful subnetting, the same number of host bits is used to designate the subnet ID for all the resulting subnetworks. This type of subnetting always results in a fixed number of subnets and a fixed number of hosts per subnet. For this reason, this is known as fixed-length subnetting. The decision about how many host bits to use for the subnet ID is a big planning decision. There are two considerations when planning subnets: the number of hosts on each network, and the number of individual local networks needed. The table for the subnet possibilities for the 192.168.1.0 network shows how the selection of a number of bits for the subnet ID affects both the number of possible subnets and the number of hosts that can be in each subnet. One thing to keep in mind is that in all IPv4 networks, two host addresses are reserved: the all-0s and the all-1s. An address with all 0s in the host portion of the address is an invalid host address and usually refers to the entire network or subnetwork. An address with all 1s in the host portion is used as the local network broadcast address. When a network is subnetted, each subnet contains an all-0s and an all-1s host address that cannot be used for individual host addresses.
View 2 Replies
View Related
Oct 20, 2011
I want to share one broadband connection between network A 192.168.1.xxx and network B 192.168.0.xxx. Network A is SBS 2008 while B is Linux with static IPs.
View 5 Replies
View Related
May 7, 2012
1. I currently have a Comcast Business Class Gateway, Cisco 2100 Series WLAN Controller and a Cisco ASA 5505 all connected together to supply LAN and WLAN internet connections on my network.
2. I also have a Card Access Security System on it owns network. It currently does not have internet access.
I would like to put my security system on the internet so that I can support it remotely. To do this, it has to be on a firewalled internet connection.Can I put the two networks on my ASA 5505 and keep them seperate? I don't want to provide a path into the Security System through my current LAN & WLAN. But I do need a frewalled internet connection on my Security System. I am trying to avoid purchasing a seperate firewall.
View 1 Replies
View Related
Jul 31, 2012
I have two dir655 routers that are connected. The second router is not setup as a wireless access point, but I am open to that if it will work. The second one is going to serve as a public wifi in a business, with a separate SSID. The first one is going to handle the local business network, with its NAS and printers. How would I prevent the public wifi from accessing the first router?
I have tried the guest wifi partition setting, however it still allows access to the lan devices on the first router. It does partition with the second router properly though, but thats not worth anything to me cause there are no lan devices on the 2nd router.
Would it work right if I turn the 2nd router into a access point, disable the dhcp server, and set it up with the guest wifi partition?
View 19 Replies
View Related
Jan 29, 2013
I have a network set up between two buildings. Each building has its own internet connection and DHCP server, building A using an RV180W router and building B using a linksys product. A WDS bridge has been set up between the two buildings using two wireless access points.The goal here is to allow clients in either building to be assigned an IP from their respective DHCP server (and thereby use that building's internet connection), yet still access network resources (eg file storage, printer, etc.) in the other building should the need arise.I have tried to set this up by having the RV180 assign IP's in the range 192.168.0.xxx to its clients in building A, and the linksys to assign IP's in the range 192.168.1.xxx in building B. I have enabled Vlan 1 and Vlan 2 on the RV180 - vlan 1 runs a DHCP server for building A. Vlan 2 runs no DHCP server and is directly connected to the WDS bridge to building B. Inter Vlan routing is enabled on both Vlan 1 and Vlan 2.On the WDS bridge modules, ive assigned both static IP's in the 192.168.1.xxx range (vlan 2 range). I've specified their dns and default gateway as 192.168.1.2 which is the static address for the RV180 in vlan 2.From a PC in vlan 1, I can ping and access the webgui for the WDS bridge modules which are in Vlan 2. However, i cannot ping any other computer in Vlan 2 which is set to accept a dynamic IP from the DHCP server operating in Building B. I assume this is because the WDS modules point to the RV180 as their default gateway and dns server, while the clients that have accepted a dynamic IP from the building B DHCP point to that device as their default gateway and DNS.I am considering trying changing the DNS and default gateway on the building B side of the WDS bridge to the building B values to see if that works, but am concerned i would lose all connectivity to the webgui from building A if i do that.
View 7 Replies
View Related
Aug 15, 2012
I'm an architect working in a small office that happens to be home to two seperate businesses, each with their owner network. However, these two networks want to use the same large format printer. I recently purchased the RV180W since the Cisco representative told me i would be able to connect both networks to the router so they can both see the printer without seeing the files on each of the other networks. We simply want to share the same printer.
Network 1:
192.168.4.1
Network 2
192.168.2.1
Large Format Printer
192.168.4.151
Network 1 has the RV180W as it's router with three gigabit switches. Computers and peripherals are connected to the three switches. 1 port open on the last switch.
I want to configure the RV180W to see both 192.168.4.1 and 192.168.2.1
What settings need to be modifed in order to accomplish this? Do I need more equipment? Is it easier to put a wireless card in one of the computers on the 192.168.2.1 network and then set it to see the 192.168.4.1 network?
View 3 Replies
View Related
Sep 1, 2011
We have 2 separate networks here, 1 for data (192.168.0.x) and 1 for VOIP phones (192.168.3.x).
I need them to both be connected to different ports on a switch (Cisco SG 300 10 port managed switch) which is then linked to another switch (Cisco Catalyst 2960 48 port switch). Then on this 2960 switch I want the link to be split back into the 2 separate networks. I think that I need to create 2 separate VLANs and assign them to different ports.
View 2 Replies
View Related
Jan 19, 2013
We have a two separate businesses in the same building who will both need access to shared resources and the same internet connection. They will need to remain on separate subnets and cannot communicate directly to each other. The current switch is a Cisco ESW-520-48P and we are looking at purchasing an SG-300-20P for the new business moving in. Heres how we envisage setting it up:
ESW-520 will host Company A's network. Workstations, servers etcSG-300 will have two VLANS. VLAN1 will host all Company B's network. Workstations, servers etc. VLAN2 will host the shared resources such as printers. The internet gateway is a UNIX based system with 3 NICS. 2 NICS are taken up by ADSL connections while the other NIC is the LAN, which would connect to VLAN2 on the SG-300. We would like to define which ADSL connection to route through depending on which subnet traffic is originating. The ESW-520 will need access to the shared resources and internet gateway on VLAN2 on the SG-300.
View 4 Replies
View Related
Feb 27, 2012
Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
I disabled the ability to change settings using wireless connection on both routers.
View 9 Replies
View Related
Dec 12, 2012
I am trying to set up two routers so that I can offer free wireless connectivity via three AP's in three adjoining rooms on a first floor and secured wireless and wired network connectivity in upstairs offices. The setup is like this:
Verizon DSL connectivity..static IP
The gateway modem/router is a Verizon DLink DSL 2750B with three ports connecting to three wired Access Points in three first floor adjoining rooms, and the 4th port connecting to a Cisco E1200 (wireless and ethernet router) located next to the Verizon Dlink. I would like the Verizon DLink to give open wireless connectivity via the access points and also connect to the adjacent E1200 router.
I would like the Cisco E1200 to offer secured wireless and ethernet connectivity to the upstairs offices. (connecterd to the Cisco E1200 is a 24 port Netgear switch.)I have spent considerable time talking with Verizon and Cisco/Linksys but have not been successful in just how to set this up.A former tech actually did have this setup but for what ever reason the settings were reset to factory defaults with no written record as to the necessary settings.
View 4 Replies
View Related
Jan 16, 2013
My fiance recently signed up for the Screen-wise Panel for Google research. Basically they monitor your TV usage and your internet usage. As part of the program they installed a Cisco WIFI router. I've got no issue with them logging the sites visited etc but I'm a little worried about them possible collecting private information (banking / work related stuff) that I don't want going out there. According to what I've read what's supposed to happen is they replace your router with the new Cisco router.The "technician" who came in and installed the router was actually a builder and not an IT technician and rather than replace our router he connected the Cisco router into port 4 of our router... I wasn't in at the time.
What I was looking to do is separate Port 4 of my router into a separate VLAN that can access the internet, but not access anything on ports 1-3, or the wireless. However, I want to be able to see everything on port 4 from the other side (in other words I want to see "into" the port 4 VLAN, but don't want them to see out). I also wanted DHCP to assign IP addresses correctly depending on where you were plugged in. In this example the first VLAN (your current router ip address) is going to be on 192.168.1.1, and the second VLAN (the new on we create on port 4) is going to be on 192.168.2.1.This is exactly what I'm looking to do, I could then connect the kids machines / tablets / ipods to the Cisco router and have the main machine and my work laptop on the main router... but I don't have a clue how to do it. </quote> Is this something that I am able to do with the Netgear router I own and is it hard to set up?
View 1 Replies
View Related
Dec 12, 2011
What I am looking to do is separate my lan traffic from my wan traffic. The amount of Lan traffic is slowing my Internet connection. The media server is the host of all my music and movies and photos and well just about everything, Some of the files are excessivly large and just kill the throughput for the other machines. I'm wondering if it's possible to put 2 NICS in each machine and have all file transfers on one subnet and all internet activities on another. I have heard it's possible to put multiple addies on a single nic but doesn't this defeat the purpose of thru put?
Network 1 - one line diagram
Internet
Cable modem
Router/wifi
Switch 1
6 PC's 1 Media/file/print server.
All pc's and wifi use this to access internet, and all outside connections like remote desktop.
Network 2 - one line diagram
Switch 2
6 PC's, 1 Media/file/print server.
All pc's use this to stream audio and video from the media server as well as print functions and file storage.I have most of the hardware already except the additional nics for each machine. so if it's not feasible I'll not waste the extra monies.
View 5 Replies
View Related
Nov 2, 2011
I am planning the following network setup.Get a server with 2 NICs, a router and a switch ,1st NIC is connected to Internet2nd NIC is connected to a router,A router is connected to a switch,All the client workstation are connected to Switch to access the server.I believe with this setup all my client workstations can browse the internet on their local machine via server.
View 11 Replies
View Related
Jun 22, 2011
Me and my girl friend both work from home doing freelance work using the internet. The company we do freelance work for allows one agent per ip address and checks the ip address for multiple agents I guess.I only have one modem, router, and two computers, but I believe they are on the same ip address.Is there a way to have two different ip addresses so we wouldn't have any issues with our work here?
View 19 Replies
View Related
Oct 28, 2011
I have 2 wireless devices. The first is the modem itself and the wireless is setup on that with WPA and all that fun stuff. The second one is a wireless access point. I would like to have a WiFi that can access ONLY the internet. I don't want it to be able to access the local network at all. Is this possible?
View 1 Replies
View Related
Mar 27, 2013
i have computer A with 2 NICs.... NIC 1 has ip 192.168.x.x which has access to internet and NIC 2 10.0.x.x which as access to server files and other docs....i have computer B with ip 192.168.x.x but want to be able to access 10.0.x.x using computer A as a router is this possible and how do i go about doing that. i was thinking about bridging NIC 1 and NIC 2 adding static route on computer A and adding a second ip 10.0.x.x to computer B NIC (i know it is possible to add 2 ips on one NIC in windows) so i can have access to the file server...is what i mention possible
View 1 Replies
View Related
May 19, 2011
Sometimes I need to administer the server, but always need to VPN. Can RDP be active while a separate VPN is active?
View 3 Replies
View Related
Oct 9, 2012
How to get wireless to a separate location from the house.I have the virgin media home hub in the house and I have a cabin out the back roughly 20m away which I require wireless to run in...i need the wireless for a ps3, mac mini, mac-book, ipad and other little wireless gadgets.I have tried using the devolo dLan 200 AV wireless n starter kit with very limited success. short of actually running an Ethernet cable along the ground and using an Ethernet switch is there anything else i can do? or are there better products with a bigger/better range than the devolo that would do the job?
View 1 Replies
View Related
Sep 22, 2011
We are on AOL Broadband and we have a Fujitsu Laptop and a Dell Notebook. Had to contact AOL by phone as we had lost our connection. Now the Laptop works but the Dell Notebook is not online.
View 1 Replies
View Related
Jun 22, 2012
I don't sound like a complete noob but anyway here it goes....I have a small business and work on my network myself. I am a novice but do enjoy the challenge. What I have in the closet is Comcast Business Class cable into a SMC 8014 router/ gateway with 4 lan ports. One of the ports goes into a ethernet switch and then those are fed into the panel for the corresponding 7 offices. The other lan port I connected a netgear n750 wireless router The Lan network is on a separate network form the wireless network because I set the Netgear n750 Wireless Router's DHCP server to on. I did this to keep people off of the local network. We have meetings with as many as 30 members and they use the wireless in varying degrees with no problems thus far. My problem now is that I think I have set it up wrong because I need to connect to my network printers and work-group computers with my wireless laptop ....problem is they are on different networks or subnets. They all have the same public IP of course but 2 seperate DHCP private networks...Is the term "different subnets"???
What I am looking to do is change the Router to an Access point or whatever works....... that grants access to the internet only for visiting members and........ Wireless access to my lan and internet for my laptop's Would making the Wireless Router an Access Point by turning off the DHCP sever and creating guest accounts be the right choice. Or is there a way to connect to my LAN through the wireless network without making this change.
View 5 Replies
View Related
Aug 30, 2011
I have a Netgear media player that I need to keep separate from my LAN. I have a switch that's connected to WAN and from the switch to dir-655 and the Netgem box. So I have two IP:s and the Netgems traffic is not going through the router at all.Now I'm short of LAN ports and I bought an eight port switch. However I only have room for keeping two devices at the space they are at. So I need to get rid of the old switch and somehow manage the network(s) with dir-655 and the new switch.The way I see it, I should connect WAN to dir-655 and from there to the switch and connect the Netgem box to router. But how can I configure dir-655 so that the Netgem is not on LAN with other devices?
View 6 Replies
View Related
Dec 12, 2012
We have CISCO ASA 5505 in our office , right now port 0 has configured for outside and port 1 for inside (I believe it is the default configurations) now for security reason I want to separate the Network traffic from inside (office LAN) and WIFI , I believe since i have 6 ports in vlan1 (inside) if I make the port which has the connecting to our switch and the port which i m going to connect to my wireless router (same vlan1) protected / isolated then this should work , but here is what is happening , the minute I save the configurations port 3 which is supposed to be my wifi port will lose its connection to the Internet.
i tried to make another vlan for wifi to separate the trafic from vlan1 , but I m not getting internet connection on that port which is been assigned to new vlan for wifi.
View 5 Replies
View Related
Jan 23, 2011
I have two networks with two different external IP address, of course I have two routers where separate PCs are connected.
My question is if is possible to run with the adapter like DHP-342 or DHP 200 this two LANs over power without conflict?
View 1 Replies
View Related
Nov 5, 2012
I'm trying to separate my management traffic from regular traffic by splitting the management and "outside" interface to separate vlans but I'm hitting a routing issue. Say I have have a management network of 192.168.1.0 255.255.255.0 running across vlan 1 and I want to use 192.168.2.0 255.255.255.0 running across vlan 2 for the outside interface to send all the other traffic excluding the management traffic across. Tag both vlans on the external interface, say Eth0/0 Default route of route outside 0.0.0.0 0.0.0.0 192.168.2.1, With this, you can not hit the management interface because there is no route defined for the 192.168.1.0 network. However of course if you try to set one, you'll get the "connected route exists" error. How can I set the default route or gateway of the 192.168.1.0 network on the ASA. Switches just don't complain like the ASA does.
View 8 Replies
View Related
