We are a small office currently running a regular network (9 wired, 2 wireless) and also using the "guest" feature (7 wireless) on a Linksys E2000. We have a switch to connect our wired equipment to the E2000. If "A" is our regular network, and "B" is our guest network, is it possible to have 2 routers on 1 cable modem and still prevent network "A" from seeing Network "B" and vice versa?? We are looking to do this because we will soon be exceeding the maximum guest users (10) allowed by the E2000. We have another Linksys router in storage, I think it is a WRT54G, that we would use if this is possible.
how I can setup two separate networks on a Westell 327w modem/router. I know this question has been asked to death and I've utilized the search function, but I still don't know how to make this work. I have a computer that I plan on using for important business and my sibiling has my other computer that he uses for gaming and downloading stuff. His computer is connected wirelessly to the Westell 327w. My computer has no internet access at this point. I would like to have both connected wirelessly to the internet, but keep them completely separate and as secure as possible, as he downloads some questionable things.
Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
I disabled the ability to change settings using wireless connection on both routers.
how do i create 2 networks using 1 cable modem and 1 router and i would like to add a firewall thinking of using xywall usg20 for the firewall..... the issue is i have a small business with 1 point of sale and1 back office computer.(network1) and i would also like to use an air port wifi to offer wifi to my cleints on a seperate network(network2) not allowing access to network1 and i want a firewall on network 1 to protect the back office and pos system
We have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.
Here's the equipment I'm working with:
DLink DIR 615 wireless router DLink DIR 515 wireless router Motorola Surfboard cable modem S85101U
I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.
I have a 192.168.1.xxx network connected to Verizon FIOS via Actiontec MOCA / router. I also have a 192.168.15.xxx network connected to Comcast via Motorola VT2442 router (used for Vonage) and a Motorola SB6121 cable modem.
Each network has it's own gigabit switch connected to each router. The two networks are physically separated but switches and routers are physically side by side.
What is the best configuration to allow devices on 192.168.1.xxx network to communicate with devices on the 192.168.15.xxx network (share printers, NAS, etc), but still have each network served by it's respective ISP, and each device still get it's dhcp, dns, gateway, etc from each respective router?
I have a need to have 2 seperate networks from my comcast cable modem.I was hoping to plug a 5 port hub into the cable modem and then plug both the wrt610n and the wrt54g into the hub. Seem that only one of the routers will get an ip assigned from Comcast.Is there a way to have one ISP cable modem and create two different home networks with the two linksys routers, thus two separate independent networks?
-Network 1: public household use and family (Jane's wireless laptop, household PC's etc).
-Network 2: private household/company use and separate from the public family network (company wireless laptop/company PC, un-secure media server).
I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.
I would like to set up two separate networks from one internet connection(modem), with the goal being to have a public network(Network A) that would have a small server on it, and then having a second secured network(Network B) that would have my personal computers on it. And both networks having connection to the internet. (The idea being that if the server somehow became compromised that my personal computers and their data would be safe)I have done some research and found that many people claim this can be done with just two or three routers, but none of them go into any detail about how to configure the routers. Below are the physical setups of the two options that I have come up with in my research, which if either would you recommend? And how would I configure each of the routers?
-------------- Modem/router 1 (Network A public) --Internet-in WAN port --port 1 to WAN of router 2-------------l --port 2 server
I have two subnets at my home and both run through my Cisco router. One is my private LAN with access to the Internet, ie your standard home network. The other is a semi-public network that I share with friends through an encrypted GRE tunnel system(DMVPN) over the Internet. I have a server on that semi-public network and I can access my friend's servers from my server, but not from my main PC on my private network.
Is there a way I can access both networks from only my main pc using two nic's?
I have two separate network with their own internet access as shown below I want to keep all setting of the left network unchanged. I can change the IPs and setting of the right side network.I want to be able to access all devices of the two network from my computer but in the same time the two network work as usual with no problems ( the same when they are sperate).One option is to set the LAN of modem 2 to 192.168.2.2 and connect one of the LAN port to LAN port of the Mkrotik router. Set the WAN of my private home router as
I am trying to make 2 COMPLETELY seperate networks with only 1 internet connection. We have routers, switches and all that. But we need to know how to set it all up. there are 2 companies in the same office, each company needs their own network at which they can view eachothers files but in no way view the other networks files.
I'm new at this stuff and very stumped. I have one WAP with multiple SSIDs that support VLAN ID (for a private and guest wireless network) and a managed switch that supports tag or port based VLAN ID. How do I set up the switch so that the networks are separate, but can still reach their own routers to get on the Internet? In case details are necessary, the WAP is a Cisco Aironet 1130AG and the switch is a Netgear FS750T2
With traditional classful subnetting, the same number of host bits is used to designate the subnet ID for all the resulting subnetworks. This type of subnetting always results in a fixed number of subnets and a fixed number of hosts per subnet. For this reason, this is known as fixed-length subnetting. The decision about how many host bits to use for the subnet ID is a big planning decision. There are two considerations when planning subnets: the number of hosts on each network, and the number of individual local networks needed. The table for the subnet possibilities for the 192.168.1.0 network shows how the selection of a number of bits for the subnet ID affects both the number of possible subnets and the number of hosts that can be in each subnet. One thing to keep in mind is that in all IPv4 networks, two host addresses are reserved: the all-0s and the all-1s. An address with all 0s in the host portion of the address is an invalid host address and usually refers to the entire network or subnetwork. An address with all 1s in the host portion is used as the local network broadcast address. When a network is subnetted, each subnet contains an all-0s and an all-1s host address that cannot be used for individual host addresses.
I want to share one broadband connection between network A 192.168.1.xxx and network B 192.168.0.xxx. Network A is SBS 2008 while B is Linux with static IPs.
1. I currently have a Comcast Business Class Gateway, Cisco 2100 Series WLAN Controller and a Cisco ASA 5505 all connected together to supply LAN and WLAN internet connections on my network.
2. I also have a Card Access Security System on it owns network. It currently does not have internet access.
I would like to put my security system on the internet so that I can support it remotely. To do this, it has to be on a firewalled internet connection.Can I put the two networks on my ASA 5505 and keep them seperate? I don't want to provide a path into the Security System through my current LAN & WLAN. But I do need a frewalled internet connection on my Security System. I am trying to avoid purchasing a seperate firewall.
I have two dir655 routers that are connected. The second router is not setup as a wireless access point, but I am open to that if it will work. The second one is going to serve as a public wifi in a business, with a separate SSID. The first one is going to handle the local business network, with its NAS and printers. How would I prevent the public wifi from accessing the first router?
I have tried the guest wifi partition setting, however it still allows access to the lan devices on the first router. It does partition with the second router properly though, but thats not worth anything to me cause there are no lan devices on the 2nd router.
Would it work right if I turn the 2nd router into a access point, disable the dhcp server, and set it up with the guest wifi partition?
I have a network set up between two buildings. Each building has its own internet connection and DHCP server, building A using an RV180W router and building B using a linksys product. A WDS bridge has been set up between the two buildings using two wireless access points.The goal here is to allow clients in either building to be assigned an IP from their respective DHCP server (and thereby use that building's internet connection), yet still access network resources (eg file storage, printer, etc.) in the other building should the need arise.I have tried to set this up by having the RV180 assign IP's in the range 192.168.0.xxx to its clients in building A, and the linksys to assign IP's in the range 192.168.1.xxx in building B. I have enabled Vlan 1 and Vlan 2 on the RV180 - vlan 1 runs a DHCP server for building A. Vlan 2 runs no DHCP server and is directly connected to the WDS bridge to building B. Inter Vlan routing is enabled on both Vlan 1 and Vlan 2.On the WDS bridge modules, ive assigned both static IP's in the 192.168.1.xxx range (vlan 2 range). I've specified their dns and default gateway as 192.168.1.2 which is the static address for the RV180 in vlan 2.From a PC in vlan 1, I can ping and access the webgui for the WDS bridge modules which are in Vlan 2. However, i cannot ping any other computer in Vlan 2 which is set to accept a dynamic IP from the DHCP server operating in Building B. I assume this is because the WDS modules point to the RV180 as their default gateway and dns server, while the clients that have accepted a dynamic IP from the building B DHCP point to that device as their default gateway and DNS.I am considering trying changing the DNS and default gateway on the building B side of the WDS bridge to the building B values to see if that works, but am concerned i would lose all connectivity to the webgui from building A if i do that.
I'm an architect working in a small office that happens to be home to two seperate businesses, each with their owner network. However, these two networks want to use the same large format printer. I recently purchased the RV180W since the Cisco representative told me i would be able to connect both networks to the router so they can both see the printer without seeing the files on each of the other networks. We simply want to share the same printer.
Network 1: 192.168.4.1
Network 2 192.168.2.1
Large Format Printer 192.168.4.151
Network 1 has the RV180W as it's router with three gigabit switches. Computers and peripherals are connected to the three switches. 1 port open on the last switch.
I want to configure the RV180W to see both 192.168.4.1 and 192.168.2.1
What settings need to be modifed in order to accomplish this? Do I need more equipment? Is it easier to put a wireless card in one of the computers on the 192.168.2.1 network and then set it to see the 192.168.4.1 network?
We have 2 separate networks here, 1 for data (192.168.0.x) and 1 for VOIP phones (192.168.3.x).
I need them to both be connected to different ports on a switch (Cisco SG 300 10 port managed switch) which is then linked to another switch (Cisco Catalyst 2960 48 port switch). Then on this 2960 switch I want the link to be split back into the 2 separate networks. I think that I need to create 2 separate VLANs and assign them to different ports.
We have a two separate businesses in the same building who will both need access to shared resources and the same internet connection. They will need to remain on separate subnets and cannot communicate directly to each other. The current switch is a Cisco ESW-520-48P and we are looking at purchasing an SG-300-20P for the new business moving in. Heres how we envisage setting it up:
ESW-520 will host Company A's network. Workstations, servers etcSG-300 will have two VLANS. VLAN1 will host all Company B's network. Workstations, servers etc. VLAN2 will host the shared resources such as printers. The internet gateway is a UNIX based system with 3 NICS. 2 NICS are taken up by ADSL connections while the other NIC is the LAN, which would connect to VLAN2 on the SG-300. We would like to define which ADSL connection to route through depending on which subnet traffic is originating. The ESW-520 will need access to the shared resources and internet gateway on VLAN2 on the SG-300.
I am trying to set up two routers so that I can offer free wireless connectivity via three AP's in three adjoining rooms on a first floor and secured wireless and wired network connectivity in upstairs offices. The setup is like this:
Verizon DSL connectivity..static IP
The gateway modem/router is a Verizon DLink DSL 2750B with three ports connecting to three wired Access Points in three first floor adjoining rooms, and the 4th port connecting to a Cisco E1200 (wireless and ethernet router) located next to the Verizon Dlink. I would like the Verizon DLink to give open wireless connectivity via the access points and also connect to the adjacent E1200 router.
I would like the Cisco E1200 to offer secured wireless and ethernet connectivity to the upstairs offices. (connecterd to the Cisco E1200 is a 24 port Netgear switch.)I have spent considerable time talking with Verizon and Cisco/Linksys but have not been successful in just how to set this up.A former tech actually did have this setup but for what ever reason the settings were reset to factory defaults with no written record as to the necessary settings.
We have a rack with a Cisco Catalyst 3750 that is networked with other racks in the data center and uses bandwidth from the data center co-location (which is also an ISP). We had a need to install a Comcast Business Class modem in this rack and want to be able to manage this modem remotely. What I have done so far is.
I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
I inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.
I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.
I'm switching to cable internet service instead of DSL. My Netgear router will not work with my cable modem; but it works like a charm with my DSL modem. Is it a problem with the router setup? Good thing I still have the DSL service.
same Modem >> same switch >> router2 >> switch >> computer
Now I want to access computers from router 1 to router 2 computers.I opened the router 2 web page and forwarded it. I put service port no. 3389, ip address of a computer of router 2 network. Now I can access the specific computer via remote desktop from router 1 computers using public ip .But what I need is I want to access via mstsc all computers of the router 2 network. using service port, ip address of one computer, I can access only one computer.
