Cisco Routers :: RV180W And Two Completely Separate Networks

Aug 15, 2012

I'm an architect working in a small office that happens to be home to two seperate businesses, each with their owner network.  However, these two networks want to use the same large format printer.  I recently purchased the RV180W since the Cisco representative told me i would be able to connect both networks to the router so they can both see the printer without seeing the files on each of the other networks.  We simply want to share the same printer.
 
Network 1:
192.168.4.1
 
Network 2
192.168.2.1
 
Large Format Printer
192.168.4.151
 
Network 1 has the RV180W as it's router with three gigabit switches.  Computers and peripherals are connected to the three switches.  1 port open on the last switch.
 
I want to configure the RV180W to see both 192.168.4.1 and 192.168.2.1
 
What settings need to be modifed in order to accomplish this?  Do I need more equipment?  Is it easier to put a wireless card in one of the computers on the 192.168.2.1 network and then set it to see the 192.168.4.1 network?

View 3 Replies


ADVERTISEMENT

Cisco Routers :: RV180W IPSec VPN With Multiple Networks?

Sep 4, 2012

I am setting up a customer site.  One side is RV180W and the other side is Checkpoint 500W.
 
RV180W side
LAN - 192.168.100.0/24
 Checkpoint side
LAN - 172.26.1.0/24
VOIP - 172.26.2.0/24
 
Need to setup an ipsec tunnel between the site.  However, from the RV180W side, I can only ping the VOIP network, but not LAN. I have heard that RV180W only can talk to one remote network via ipsec, correct?  workaround this other than changing out the RV180W? 

View 4 Replies View Related

How To Connect 2 Routers - No Separate Networks

Mar 3, 2013

I want to connect 2 routers like this picture.No need to have it as separate networks.

View 3 Replies View Related

DIR 655 - Connecting Two Routers Together And Keeping Networks Separate

Jul 31, 2012

I have two dir655 routers that are connected. The second router is not setup as a wireless access point, but I am open to that if it will work. The second one is going to serve as a public wifi in a business, with a separate SSID. The first one is going to handle the local business network, with its NAS and printers. How would I prevent the public wifi from accessing the first router?

I have tried the guest wifi partition setting, however it still allows access to the lan devices on the first router. It does partition with the second router properly though, but thats not worth anything to me cause there are no lan devices on the 2nd router.

Would it work right if I turn the 2nd router into a access point, disable the dhcp server, and set it up with the guest wifi partition?

View 19 Replies View Related

Cisco Routers :: Vlans On R180W To Separate Networks?

Jan 29, 2013

I have a network set up between two buildings.  Each building has its own internet connection and DHCP server, building A using an RV180W router and building B using a linksys product.  A WDS bridge has been set up between the two buildings using two wireless access points.The goal here is to allow clients in either building to be assigned an IP from their respective DHCP server (and thereby use that building's internet connection), yet still access network resources (eg file storage, printer, etc.) in the other building should the need arise.I have tried to set this up by having the RV180 assign IP's in the range 192.168.0.xxx to its clients in building A, and the linksys to assign IP's in the range 192.168.1.xxx in building B.  I have enabled Vlan 1 and Vlan 2 on the RV180 - vlan 1 runs a DHCP server for building A.  Vlan 2 runs no DHCP server and is directly connected to the WDS bridge to building B.  Inter Vlan routing is enabled on both Vlan 1 and Vlan 2.On the WDS bridge modules, ive assigned both static IP's in the 192.168.1.xxx range (vlan 2 range).  I've specified their dns and default gateway as 192.168.1.2 which is the static address for the RV180 in vlan 2.From a PC in vlan 1, I can ping and access the webgui for the WDS bridge modules which are in Vlan 2.  However, i cannot ping any other computer in Vlan 2 which is set to accept a dynamic IP from the DHCP server operating in Building B.  I assume this is because the WDS modules point to the RV180 as their default gateway and dns server, while the clients that have accepted a dynamic IP from the building B DHCP point to that device as their default gateway and DNS.I am considering trying changing the DNS and default gateway on the building B side of the WDS bridge to the building B values to see if that works, but am concerned i would lose all connectivity to the webgui from building A if i do that. 

View 7 Replies View Related

Linksys Wireless Router :: E2000 Separate Networks On One Modem / Two Routers

Feb 27, 2012

Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
 
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
 
I disabled the ability to change settings using wireless connection on both routers.

View 9 Replies View Related

Two Routers (cisco E1200 / Dlink Dsl 2750b) Separate Wifi Networks - One Internet Connection?

Dec 12, 2012

I am trying to set up two routers so that I can offer free wireless connectivity via three AP's in three adjoining rooms on a first floor and secured wireless and wired network connectivity in upstairs offices. The setup is like this:

Verizon DSL connectivity..static IP

The gateway modem/router is a Verizon DLink DSL 2750B with three ports connecting to three wired Access Points in three first floor adjoining rooms, and the 4th port connecting to a Cisco E1200 (wireless and ethernet router) located next to the Verizon Dlink. I would like the Verizon DLink to give open wireless connectivity via the access points and also connect to the adjacent E1200 router.

I would like the Cisco E1200 to offer secured wireless and ethernet connectivity to the upstairs offices. (connecterd to the Cisco E1200 is a 24 port Netgear switch.)I have spent considerable time talking with Verizon and Cisco/Linksys but have not been successful in just how to set this up.A former tech actually did have this setup but for what ever reason the settings were reset to factory defaults with no written record as to the necessary settings.

View 4 Replies View Related

Cisco Routers :: RV180W - Any External Source IP For RV180W DMZ?

Apr 21, 2013

I got : RV180W router updated with the last firmware.Static IP for the DMZ host (Synology Server 212+) My problem is that I had try all combinaison since 10 days to get IP source in synology interface (to block IP's of bad connections...) but, I only see the RV180W adress....So impossible to block bad connections IP.

View 3 Replies View Related

Cisco Routers :: Difference Between RV180W-E-K9-G5 And RV180W-A-K9-NA?

Dec 15, 2012

I would like to ask if what is the difference between RV180W-E-K9-G5 and RV180W-A-K9-NA specifically the -E and the -A.  As far as I know -A is the compliance code for Philippines.  Am I right?  If yes, what about -E?  There is a documentation for wireless complaince on Aeronet devices but what about these SB products?

View 9 Replies View Related

Two Separate Networks On One PC?

May 1, 2011

I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.

View 2 Replies View Related

Setting Up Two Separate Networks With One Isp?

Feb 5, 2012

I would like to set up two separate networks from one internet connection(modem), with the goal being to have a public network(Network A) that would have a small server on it, and then having a second secured network(Network B) that would have my personal computers on it. And both networks having connection to the internet. (The idea being that if the server somehow became compromised that my personal computers and their data would be safe)I have done some research and found that many people claim this can be done with just two or three routers, but none of them go into any detail about how to configure the routers. Below are the physical setups of the two options that I have come up with in my research, which if either would you recommend? And how would I configure each of the routers?

--------------
Modem/router 1 (Network A public)
--Internet-in WAN port
--port 1 to WAN of router 2-------------l
--port 2 server

[code]...

View 2 Replies View Related

1 PC Accessing Two Separate Networks?

Sep 12, 2012

I have two subnets at my home and both run through my Cisco router. One is my private LAN with access to the Internet, ie your standard home network. The other is a semi-public network that I share with friends through an encrypted GRE tunnel system(DMVPN) over the Internet. I have a server on that semi-public network and I can access my friend's servers from my server, but not from my main PC on my private network.

Is there a way I can access both networks from only my main pc using two nic's?

View 7 Replies View Related

Two Separate Networks On One DSL Modem?

Mar 29, 2012

how I can setup two separate networks on a Westell 327w modem/router. I know this question has been asked to death and I've utilized the search function, but I still don't know how to make this work. I have a computer that I plan on using for important business and my sibiling has my other computer that he uses for gaming and downloading stuff. His computer is connected wirelessly to the Westell 327w. My computer has no internet access at this point. I would like to have both connected wirelessly to the internet, but keep them completely separate and as secure as possible, as he downloads some questionable things.

View 1 Replies View Related

Cisco Firewall :: Keep 2 Networks Separate On ASA 5505

May 7, 2012

1. I currently have a Comcast Business Class Gateway, Cisco 2100 Series WLAN Controller and a Cisco ASA 5505 all connected together to supply LAN and WLAN internet connections on my network.
 
2.  I also have a Card Access Security System on it owns network.  It currently does not have internet access.
 
I would like to put my security system on the internet so that I can support it remotely.  To do this, it has to be on a firewalled internet connection.Can  I put the two networks on my ASA 5505 and keep them seperate?  I don't want to provide a path into the Security System through my current LAN & WLAN.  But I do need a frewalled internet connection on my Security System.  I am trying to avoid purchasing a seperate firewall.

View 1 Replies View Related

Access The Devices Of Two Separate Networks?

Apr 26, 2011

I have two separate network with their own internet access as shown below I want to keep all setting of the left network unchanged. I can change the IPs and setting of the right side network.I want to be able to access all devices of the two network from my computer but in the same time the two network work as usual with no problems ( the same when they are sperate).One option is to set the LAN of modem 2 to 192.168.2.2 and connect one of the LAN port to LAN port of the Mkrotik router. Set the WAN of my private home router as

IP: 192.168.2.100
subnet mask: 255.255.255.0
gateway: 192.168.2.2
Home router LAN: 192.168.3.1

Is their another method to connect the two network and keep the same setting for the network on the left side?

View 2 Replies View Related

How To Make Two Separate Networks On One Connection

Feb 9, 2012

I am trying to make 2 COMPLETELY seperate networks with only 1 internet connection. We have routers, switches and all that. But we need to know how to set it all up. there are 2 companies in the same office, each company needs their own network at which they can view eachothers files but in no way view the other networks files.

View 1 Replies View Related

Setting Up Separate Networks With VLAN

Oct 3, 2012

I'm new at this stuff and very stumped. I have one WAP with multiple SSIDs that support VLAN ID (for a private and guest wireless network) and a managed switch that supports tag or port based VLAN ID. How do I set up the switch so that the networks are separate, but can still reach their own routers to get on the Internet? In case details are necessary, the WAP is a Cisco Aironet 1130AG and the switch is a Netgear FS750T2

View 14 Replies View Related

Two Separate Networks On One Cable Modem

Feb 5, 2012

We are a small office currently running a regular network (9 wired, 2 wireless) and also using the "guest" feature (7 wireless) on a Linksys E2000. We have a switch to connect our wired equipment to the E2000. If "A" is our regular network, and "B" is our guest network, is it possible to have 2 routers on 1 cable modem and still prevent network "A" from seeing Network "B" and vice versa?? We are looking to do this because we will soon be exceeding the maximum guest users (10) allowed by the E2000. We have another Linksys router in storage, I think it is a WRT54G, that we would use if this is possible.

View 1 Replies View Related

Cisco Switches :: SG300 Switch 2 Separate Networks

Sep 1, 2011

We have 2 separate networks here, 1 for data (192.168.0.x) and 1 for VOIP phones (192.168.3.x).
 
I need them to both be connected to different ports on a switch (Cisco SG 300 10 port managed switch) which is then linked to another switch (Cisco Catalyst 2960 48 port switch). Then on this 2960 switch I want the link to be split back into the 2 separate networks. I think that I need to create 2 separate VLANs and assign them to different ports.

View 2 Replies View Related

Why Should Wireless And Wired Networks Be On Separate Subnets

Oct 24, 2011

With traditional classful subnetting, the same number of host bits is used to designate the subnet ID for all the resulting subnetworks. This type of subnetting always results in a fixed number of subnets and a fixed number of hosts per subnet. For this reason, this is known as fixed-length subnetting. The decision about how many host bits to use for the subnet ID is a big planning decision. There are two considerations when planning subnets: the number of hosts on each network, and the number of individual local networks needed. The table for the subnet possibilities for the 192.168.1.0 network shows how the selection of a number of bits for the subnet ID affects both the number of possible subnets and the number of hosts that can be in each subnet. One thing to keep in mind is that in all IPv4 networks, two host addresses are reserved: the all-0s and the all-1s. An address with all 0s in the host portion of the address is an invalid host address and usually refers to the entire network or subnetwork. An address with all 1s in the host portion is used as the local network broadcast address. When a network is subnetted, each subnet contains an all-0s and an all-1s host address that cannot be used for individual host addresses.

View 2 Replies View Related

Share Internet Access Between Two Separate Networks?

Oct 20, 2011

I want to share one broadband connection between network A 192.168.1.xxx and network B 192.168.0.xxx. Network A is SBS 2008 while B is Linux with static IPs.

View 5 Replies View Related

Cisco Switches :: ESW-520 / Setting Up Two Separate Networks With Access To Shared Resources?

Jan 19, 2013

We have a two separate businesses in the same building who will both need access to shared resources and the same internet connection. They will need to remain on separate subnets and cannot communicate directly to each other. The current switch is a Cisco ESW-520-48P and we are looking at purchasing an SG-300-20P for the new business moving in. Heres how we envisage setting it up:
 
ESW-520 will host Company A's network. Workstations, servers etcSG-300 will have two VLANS. VLAN1 will host all Company B's network. Workstations, servers etc. VLAN2 will host the shared resources such as printers. The internet gateway is a UNIX based system with 3 NICS. 2 NICS are taken up by ADSL connections while the other NIC is the LAN, which would connect to VLAN2 on the SG-300. We would like to define which ADSL connection to route through depending on which subnet traffic is originating. The ESW-520 will need access to the shared resources and internet gateway on VLAN2 on the SG-300. 

View 4 Replies View Related

Cisco Routers :: Completely Disable DHCP On SR520-FE?

Dec 13, 2011

how can I completely disable DHCP on SR520-FE?

View 8 Replies View Related

Cisco Routers :: Completely Turn Off Wireless Network Of RV220W?

Aug 24, 2011

I am using the RV220W with the latest firmware, I disabled all the four APs and also disabled the Radio, but the "Wireless" green light on the front panel still ON, why? How can I completely turn off the wireless?
 
Quoted from manual: WIRELESS—The Wireless light is green when the wireless module is enabled. The light is off when the wireless module is disabled.
  
Moreover I tried to disable the "Radio" while enabled one AP, I found that I can still connect to that AP, so what is the Radio's Enable/Disable used for?

View 16 Replies View Related

Routers / Switches :: Wireless Router Will Not Download Completely

Nov 24, 2011

where to change version of windows I can not find where to change the version of my windows to make it compatible with my router..I know that there is a place to change it,but I can not find it...I have Windows XP and it is compatible with my wireless router.

View 3 Replies View Related

Cisco Routers :: RV180W Upgrade From 1.0.0.30 To 1.0.2.6

Mar 15, 2013

I installed the RV180W yesterday and decided to play with it a bit today. I got stuck on the firmware update. Tried different browsers on different PC's. Tried going to 1.0.1.9 first. I have the "reset all configurations" button checked. After looking through the posts here I'm not sure this firmware will even fix my next few problems(port forwarding etc).  Is there a trick with this device?

View 4 Replies View Related

Cisco Routers :: VPN Connection Between Two RV180W?

Feb 5, 2013

I'm trying to make the VPN connection between two routers CISCO RV180w.I performed the basic configuration in cisco "server". I did the same in cisco "client".The following configuration and logs, do not know what to do ...
 
SERVER CONFIGURATION:
 IKE Policy Configuration: 
VPN Policy Configuration:
 CLIENT CONFIGURATION:

[code]....

View 8 Replies View Related

Cisco Routers :: RV180W VLAN ID On WAN

Apr 9, 2013

We have installed a fiber internet access and have the ONT from the provider already installed.We're trying to use the RV180W to use this internet connection. [code] So I need to configure the router with the .36 static IP on the WAN, and using the .37 gateway and the provided DNS servers. I also need that this WAN is tagged with VLAN ID 20. I'm only able to set VLAN ID on the LAN ports via the admin interface.

View 8 Replies View Related

Cisco Routers :: RV180w VPN Configuration For Mac OS X

Jul 25, 2012

I am struggling to configure my new RV180w router to accept a VPN connection from my Apple computers.
 
I wish to use IPSec with Group and Pre-Shared Key authentication. The RV180 has just replaced my 800 series ADSL router and I want my remote clients to be able to connect using either the VPN client capability built into the OS X operating system or the Cisco VPN Client software installed on their Macs.
 
So far, using the RV180's web setup screens, I have created a VPN Policy and a corresponding IKE Policy was created as well. I couldn't see anywhere to include the 'Group' name. I have created a user but wasn't sure of which Protocol to use so I am trying XAUTH.
 
At the client end some people are connecting using Cisco's VPN Client software Download Software - Cisco Systems
 
Some people, with OS X 10.6 and above, are using the Mac OS X network built-in VPN client.
 
We all connected without a problem to the previous 800 series router using IPSec with Group authentication and Pre-Shared key.

View 5 Replies View Related

Cisco Routers :: RV180W - Firmware 1.0.2.6 UC 100%

Mar 19, 2013

i've installed the new firmware on my router and now the UC is showing 100% all the time. I've tried to factory reset it, it's doing the same thing. If I downgrade to previous firmware, it goes back to normal . I've only 1 PC in my network (test lab), so no big traffic here. is it a bug ?

View 1 Replies View Related

Cisco Routers :: RV180W Do Not Allow VLANs To Communicate?

Oct 3, 2012

I just recently switched from the WRVS4400N to the RV180W. I have 4 VLANs, and I want VLANs 1, 2, 3 to communciate freely, but I DONT want VLAN 4 to communicate with anybody, just Internet access. On the WRVS4400N, I was able to do this using the Firewall > IP Based ACL. I notcied that the RV180W, does not have such an option. I am sure there is something I am missing, I just cant find out how to isolate VLAN 4.

View 5 Replies View Related

Cisco Routers :: Rv180w Ftp Upload With Vsftpd

Sep 6, 2012

we've changed our rv042 for a rv180w and now when I try to upload files to my ftp server (vsftpd under centos) it get stuck at 100%.I've changed my ftp server to proftpd instead of vsftpd and everything's ok.but vsftpd isn't the problem since i was able to upload with my rv042 without any problems.so i guess there's a problem with the rv180w security.i've already disable stealth mode and it's doing the same thing when i try to upload to the same server but through the vpn tunnel, everything's ok.So it's really in the rv180w lan->wan routing

View 10 Replies View Related

Cisco Routers :: VPN Client Software For RV180W?

Aug 13, 2012

Have not purchased RV180W at this time, therefore have not read manual. Need for small office, 2 VPN logins max & not 24x7 use. What VPN client software ? (using Win7-64bit laptops)
 
I did notice software called Quick VPN Client 1.4.2.1 for download.
 
Does buying RV180W allow download of Cisco Systems VPN Client software ?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved