where to change version of windows I can not find where to change the version of my windows to make it compatible with my router..I know that there is a place to change it,but I can not find it...I have Windows XP and it is compatible with my wireless router.
View 3 RepliesI have used adsl internet in network system(domain) at my work place, i can't download any pdf files.of course, computer server has limited connecting to internet for some operators.so we install a special program in server for limiting and now we cant download any pdf files.
View 1 Replies View RelatedI am using the RV220W with the latest firmware, I disabled all the four APs and also disabled the Radio, but the "Wireless" green light on the front panel still ON, why? How can I completely turn off the wireless?
Quoted from manual: WIRELESS—The Wireless light is green when the wireless module is enabled. The light is off when the wireless module is disabled.
Moreover I tried to disable the "Radio" while enabled one AP, I found that I can still connect to that AP, so what is the Radio's Enable/Disable used for?
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies View RelatedI'm an architect working in a small office that happens to be home to two seperate businesses, each with their owner network. However, these two networks want to use the same large format printer. I recently purchased the RV180W since the Cisco representative told me i would be able to connect both networks to the router so they can both see the printer without seeing the files on each of the other networks. We simply want to share the same printer.
Network 1:
192.168.4.1
Network 2
192.168.2.1
Large Format Printer
192.168.4.151
Network 1 has the RV180W as it's router with three gigabit switches. Computers and peripherals are connected to the three switches. 1 port open on the last switch.
I want to configure the RV180W to see both 192.168.4.1 and 192.168.2.1
What settings need to be modifed in order to accomplish this? Do I need more equipment? Is it easier to put a wireless card in one of the computers on the 192.168.2.1 network and then set it to see the 192.168.4.1 network?
how can I completely disable DHCP on SR520-FE?
View 8 Replies View RelatedI've had this WRT300N for several years and it has worked very well.It suddenly dropped all wireless connections and no one can re-connect. My main pc is hard wired directly to the router and works perfectly as always. 3 wireless pc's and 3 handheld devices suddenly can't connect. I've powered down my modem and router for several minutes, but nothing changed. The firmware was upgraded a long time ago and there are no other upgrades available.
View 7 Replies View RelatedI purchased an E4200 from a retail store about ten days ago.It completely quits periodically. Even the managment interface is gone. It seems to just die. The only fix is to unplug it, count to ten and plug it back in.router also gets extremely hot. I have tried locating it in several places, no matter where I put it, it still gets very hot. Right now I have it straddling a trash can so that it has about two feet of air space under it. It is still uncomfortable to the touch.
When I contacted technical support all they would do is walk me through setting it up from scratch again. I've done that many times, and I do not want to do it agian. Setting the router up agian will not make it cool down.
1. Exchange this for another one, probably from the same batch, at the store?
2. Fight with Linksys tech support to get a waranty return? (Any input on how to get them to do this?)
3. Return this router altogether (paying the retailer's 15% restocking fee) and look for another brand?
I've just been on the phone with tech support and it appears that the latest firmware that Cisco Connect is stating that one should install is faulty and is bricking routers.
I've tried resetting it, holding the reset button while powering up for over 5 minutes with no change.
All the router does now is the power light is blinking but no access to the router is possible at all.
My old WRT54G V8 router has been acting up lately. It keep dropping the connection out of the blue. Sometimes I'd be browsing the Internet when the router's signal vanishes completely, it disappears from the list of available wireless networks on not just my computer, but my smartphone and all other devices in the household! Other times I keep connected to the network but there's no access to the Internet. Everything seems fine on the ISP's part, I can connect just fine directly from my modem, so I'm certain the problem is with the router. Besides, these problems are solved by just power cycling the router.
View 4 Replies View RelatedI posted my complaint on Amazon.com recently. My E4200 router stopped allowing traffic through ports completely. I was able to unplug the power and allow the router to cool, and the router would work for a while then stop after about 10 minutes. I assume that the unit was overheating, but I do not have the equipment of a test facility.I bought a Belkin AC 1200 router which is a bit of an upgrade from Amazon.com. I do not think that there is anything that Linksys can do for me as my warranty expired. I just thought that when I spent what was to me a lot of money the router should have lasted longer.
View 5 Replies View RelatedOn the E4200, can the wireless be turned off completely? I am no longer using any wireless devices and thought that if I can turn off or disable all wireless functionality it might be more secure and run cooler. Short of that...what settings can I use that would prevent any wireless device from gaining access?
View 2 Replies View RelatedI was in the Wireless tab>Basic Wireless Settings and then I clicked the "Reset Security" button. I don't know what that did but I've been completely shut out of my connection ever since and I don't know how to fix it. I tried doing the install sequence of the router just now (Clone MAC address, then release and renew DHCP, power cycle modem, router, and PC) but it still didn't work.
View 1 Replies View Relatedhow to connect two subnets with two switches and one router using router sim software?
View 1 Replies View Relatedwhen i hook up all the cables to the router and computer the main computer dose not get internet and the laptop dose not get internet
View 1 Replies View RelatedBelkin Wireless Router- F5D8236-4 Ver 3 WIN 7 Home Premium - LAN download speed is good- 33.00 mbps WLAN on same PC is 16.50 mbps. The upload speed is same for both 5.75. WLAN speed same if within 10 ft. or more.
View 2 Replies View RelatedI have :
1- Router that is working as Router (IP: 192.168.0.1 ) ( Ethernet ) routing from :
IP Address:192.168.67.83
Subnet Mask:255.255.192.0
DNS Server:192.168.100.1 , 195.175.39.39and its providing internet via Wireless.
2- router for the office ( connected network HDD, Printer ) is using the IP : 192.168.5.254-
What I want to do :
1- turn the wirless off on the router ( 192.168.0.1 ).
2- make all of the employees in the office use the wifi on the router ( 192.168.5.254 ).
3- make the router 192.168.5.254 serve Internet.the problem : we cann't connect the first router ( 192.168.0.1 ) to the second router ( 192.168.5.254 ) via Ethernet. The question : can we connect them via wireless ?
The Main Router : 192.168.5.254
Linksys X3000 The Internet Router : 192.168.0.1
150M Wireless Lite N Router
Model No. TL-WR740N / TL-WR740ND
i need a driver for my wireless router wrt54g
View 3 Replies View RelatedI changed my netgear wireless router password and now my laptop will not connect to the router or to the internet. It has no popup to put the new password. I have no problem logging on with my phone...just the laptop.
View 1 Replies View RelatedI don't remember the password for my wireless router.
View 4 Replies View RelatedCan I have a wireless access point connected, by wire, to say 2 PCs and a wireless router connected to the internet (+ other PCs) and the link between the access point and router is wireless (i.e. not wired)
View 1 Replies View RelatedThe router's software was installed on our desktop years ago and now, the desktop is quite old and we have to sell it. I need to know if we need to reinstall the software again in probably in one of the laptops at home.
View 2 Replies View Relatedhow do I hook up a router and a switch together to my cable modem
View 3 Replies View RelatedHave a westell wireless router, where is wps buttob
View 2 Replies View RelatedThe wireless router PW has been changed, I got the new one correct but upon entering it on my laptop it goes around circle showing,"Wireless network detected" and then,"Unable to connect to preferred wireless network"It never works. I don't know how to fix this problem. It did not happen on my iPad.
View 2 Replies View RelatedHow can I turn my PC / Laptop running Windows XP into a wireless router so that I can use the internet in it through wifi enabled devices?
View 3 Replies View Related2 routers in series, is one more secure. I recently asked about setting up two routers in series as routers, one wireless one not. It was my understanding that the computers on the second router would not be visible to computers on the first router, the wireless one. My assumption was that this would make it more difficult for someone who got access to the wireless router to also access those computers on the second router.
View 3 Replies View RelatedI am trying to connect a Netgear wirless router to my cable modem. I have followed the instructions on the set up wizard but it fails to get a connection with the IP and DNS info I provide.I got the IP address info by connecting intially direct from the modem to the PC and then went to Run CMD and type ipconfig /all. I then started the set up wizard and followed the instructions, turning things on in specific order etc. After input the IP and DNS info it reports an error and tells me to check the address information is correct.My internet is a static IP connection (so it tells me and the IP information doesn't change).
View 3 Replies View RelatedI need info on how to connect the cables so I can get a wireless connection. Here's what I have:Vonage router (VOIP phone) linksysE1200 wireless-n router XP OS cable modem
View 1 Replies View Relatedmy computer will connect wired to internet and can find the wireless connection but wont connect. my wireless icon flashes intermitently and my mobile will work via wifi. do i need a new router this one is a G wireless Modem router Belkin had it for about 4 years?
View 4 Replies View RelatedI have high-speed cable access currently coming into an older D-Link 4-port wired router. I need to buy a new wired and wireless router so I can sync my new Android 4G phone (I'm in an area with bad cell coverage but I can sync with wi-fi). I have a second house about 200 feet from mine and have 3 Cat5E lines running underground in conduit to it so the lady next door and and her two kids can use the internet (I have 40-50mb service for my business use at home). Problem is that my kids have discovered YouTube, streaming video, video chat, etc. and are burning up my bandwidth. I currently have two of the lines to them disconnected so that I can limit their use to one computer at a time. I'm considering having them buy a Wireless Access Point, can they connect it to the standard single Cat5E LAN wire that is coming from my new wired and wireless router when I buy it?
View 2 Replies View RelatedI am trying to download firmware for an RV180W Wireless-N Multifunction VPN Firewall Router. I found updates for a 110 in BIN format (router only updates from IMG). Currently running stock firmware on that router and need the update.
View 2 Replies View RelatedI bought the DIR-655 less than a year ago in Amazon, shipping it to NY. And then I came back to Uruguay. Almost 3 months ago the router stopped working completely and I started to search for support in Uruguay.After calling US support I was told I should contact the local or regional D-Link (which I later found is D-Link LA). And via DLinkLA.com I found the company TELEDATA S.A. url... who does the official support for D-Link in Uruguay. They told me the router couldn't be fixed, and told me DLinkLA, which is based in Chile, would either send me a working one (they also told me the service/warrany was already approved), or send me the money and gave me their contact details.After two weeks of contacting them, trying to get their attention, they finally told me it was not their responsibility because it was bought in the US. And now they don't return my e-mails.
View 5 Replies View Related