The router's software was installed on our desktop years ago and now, the desktop is quite old and we have to sell it. I need to know if we need to reinstall the software again in probably in one of the laptops at home.
My d-linl router was not working and I pushed reset button and it went back to factory setting. I don't know what the factory setting is and I want to put my own password but don't know how. I have Window 7?
At 9:15 each night my DLINK router drops the signal.I've tried to unplug it but that doesn't work but it is working again each morning. I can plug directly into the cable modem and it works so I assume it is fine.Is there a time setting on the router?
I've had my network up and running for several years with no issues. Last week I upgraded my router to a Dlink 826L and now anything connected to my downstream Dlink DSS16+ can't be accessed.
We had to send our Canon Pixma MP830 all in one printer in for repairs, and we have an mx870 loaner. The MP830 was connected directly to the desktop computer and to a lap top in another room via a dlink router. But we do not know how to get the lap top to recognize the MX870. We tried adding it and entered the name Canon Pixma M870, and the program does not accept the name.
I have 4 desktops cat5 to Dlink DIR 615 router. All work fine. Any wireless clients, laptop or netbooks, see the desktop computers for a while then disconnect somehow. All machines can see the Internet through the router at all times. The desktops disappear from the laptop/netbooks but the wireless machines can be seen from the desktop computers but clicking on them gets 'Access Denied' message after a wait.3 desktops = XP, 1 98SE. All laptop/netbooks = XP
I have a cricket broadband modem to connect to the internet. I want to use my Dlink di-524 router to share that internet connection with the other computers on my network. How do I do this?
I had this small internet cafe with 15 units pc. and browsing the web is not that stable. i have to unplug the internet modem everytime i can't connect to the internet.I think it has something to do with the settings that was in the router since it was just configured by a tech guy which i think not 100% sure of what he did, though it can connect to net for sometime but most of the time it is down.
Lost access to internet on all wired comupters. Can still connect to router via wired computers but not beyond. Wired PS 3 and wireless still connect to internetUsing a D-link dir 655 router
My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.
We are using a Westell 7500 wireless modem/router from Frontier without any problemsI have two d-link wireless n300 routers that I want to add to network so I can add them to our DirecTV DVR's. I have tried using the D-link CD and instructions without any success. Everytime it prompts me for my 1st router's (the Westell's) login/password, it says it's invalid. If I then click to continue w/o the logon and password, it then gives me an error when it is trying to add the d-link. I have tried everything. My Westell IP is 192.168.1.1. How can I access and add the d-link routers? Is there an easier way?
I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655 Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
DLink DGS-3100 POE switches? I'm working for a place that has these and they are wanting to invest in a VOIP system. I've never seen these type of switches before, and would like some feed back before I roll out a 70+ phone VOIP system. They are managed switches but are all running un-managed at the moment.
They are also using a Fortigate 80cm Firewall/Router. I'm not familiar with this device either.
I'm missing layer 3 as I can't setup any VLan's with this equipment.
I'm using an E2500 router and EA2500 adapter. I started from scratch today, uninstalling then reinstalling the software. As instructed in the video on the Linksys website, I plugged in the router, then the computer to cable to the router, then the router to the modem. When all was finished, I disconnected the cable from the computer to the router. Should I have left that in? When it's in, multiple networks shows in Network and Sharing Center.
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
I have a house with two flours and all rooms have an ethernet port.The first flour has a main router which all rooms connect to (via wires) and this router dials to the internet. This router is also responsible for DHCP etc, and its a D-Link 6740VN.The other flour has the following setup: Wall-> Cross Cable -> D-link 2760U Router -> PC.My goal is to have two routers that broadcast wireless access. So when I'm on the first flour I'm connected to the main router, and when I move around the house with my phone I want to pick up the second router automatically.I've tried all sorts of combinations and settings and can't get it to work.
1. Tried setting different SSIDs, channels etc but the phone won't switch routers because the range is overlapping. 2. Tried setting the same SSID, channel, security, etc... also no luck. The phone only sees one AP but I don't see improved signal as I move around. 3. I don't want to use wireless bridging because a) It's slow and b) I have the wires in the walls and it feels like a wast.
I've formatted my computer(Windows 7 Ultimate 64bit), then I downloaded my wireless adapter driver from my manufacturer's website, installed it and tried to join my home network but it couldn't connect it(or my neighbor's network, which I could access before formatting the computer).
ok my laptop dell XPS got virus and crashed...i cleaned it up and re installed window 7.Now my wireless 825 program is gone...i tried to install CD dlink 825 and it kept say retry.
I have WAG54G2 wireless modem. It has been working perfectly until I formatted my desktop computer and reinstalled Windows XP. Now I want to reinstall my modem but is gives this error:"Error 322 New Router or Gateaway Not Detected"The old wireless configuration still works with my laptop, but I am afraid of losing my wireless connection so I did not reset the modem. Do I have to reset it?
1- Router that is working as Router (IP: 192.168.0.1 ) ( Ethernet ) routing from : IP Address:192.168.67.83 Subnet Mask:255.255.192.0 DNS Server:192.168.100.1 , 195.175.39.39and its providing internet via Wireless.
2- router for the office ( connected network HDD, Printer ) is using the IP : 192.168.5.254-
What I want to do :
1- turn the wirless off on the router ( 192.168.0.1 ).
2- make all of the employees in the office use the wifi on the router ( 192.168.5.254 ).
3- make the router 192.168.5.254 serve Internet.the problem : we cann't connect the first router ( 192.168.0.1 ) to the second router ( 192.168.5.254 ) via Ethernet. The question : can we connect them via wireless ?
The Main Router : 192.168.5.254 Linksys X3000 The Internet Router : 192.168.0.1 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND
I changed my netgear wireless router password and now my laptop will not connect to the router or to the internet. It has no popup to put the new password. I have no problem logging on with my phone...just the laptop.
Can I have a wireless access point connected, by wire, to say 2 PCs and a wireless router connected to the internet (+ other PCs) and the link between the access point and router is wireless (i.e. not wired)
where to change version of windows I can not find where to change the version of my windows to make it compatible with my router..I know that there is a place to change it,but I can not find it...I have Windows XP and it is compatible with my wireless router.
I've had the AE2500 adapter for a few weeks now, and it's worked fine up to this point. When I started up my computer today, however, it wouldn't connect to the network. I've uninstalled the software that came with the adapter and I've tried to reinstall it. However, when I got to the installation step to insert the adapter, the computer would not identify the AE2500. I've tried updating the drivers through the device manager, but I received an error stating that "a device attached to the system is not functioning".