Share Internet Access Between Two Separate Networks?
Oct 20, 2011I want to share one broadband connection between network A 192.168.1.xxx and network B 192.168.0.xxx. Network A is SBS 2008 while B is Linux with static IPs.
View 5 Replies
ADVERTISEMENT
Access The Devices Of Two Separate Networks?
Apr 26, 2011I have two separate network with their own internet access as shown below I want to keep all setting of the left network unchanged. I can change the IPs and setting of the right side network.I want to be able to access all devices of the two network from my computer but in the same time the two network work as usual with no problems ( the same when they are sperate).One option is to set the LAN of modem 2 to 192.168.2.2 and connect one of the LAN port to LAN port of the Mkrotik router. Set the WAN of my private home router as
IP: 192.168.2.100
subnet mask: 255.255.255.0
gateway: 192.168.2.2
Home router LAN: 192.168.3.1
Is their another method to connect the two network and keep the same setting for the network on the left side?
Cisco Switches :: ESW-520 / Setting Up Two Separate Networks With Access To Shared Resources?
Jan 19, 2013We have a two separate businesses in the same building who will both need access to shared resources and the same internet connection. They will need to remain on separate subnets and cannot communicate directly to each other. The current switch is a Cisco ESW-520-48P and we are looking at purchasing an SG-300-20P for the new business moving in. Heres how we envisage setting it up:
ESW-520 will host Company A's network. Workstations, servers etcSG-300 will have two VLANS. VLAN1 will host all Company B's network. Workstations, servers etc. VLAN2 will host the shared resources such as printers. The internet gateway is a UNIX based system with 3 NICS. 2 NICS are taken up by ADSL connections while the other NIC is the LAN, which would connect to VLAN2 on the SG-300. We would like to define which ADSL connection to route through depending on which subnet traffic is originating. The ESW-520 will need access to the shared resources and internet gateway on VLAN2 on the SG-300.
Two Routers (cisco E1200 / Dlink Dsl 2750b) Separate Wifi Networks - One Internet Connection?
Dec 12, 2012I am trying to set up two routers so that I can offer free wireless connectivity via three AP's in three adjoining rooms on a first floor and secured wireless and wired network connectivity in upstairs offices. The setup is like this:
Verizon DSL connectivity..static IP
The gateway modem/router is a Verizon DLink DSL 2750B with three ports connecting to three wired Access Points in three first floor adjoining rooms, and the 4th port connecting to a Cisco E1200 (wireless and ethernet router) located next to the Verizon Dlink. I would like the Verizon DLink to give open wireless connectivity via the access points and also connect to the adjacent E1200 router.
I would like the Cisco E1200 to offer secured wireless and ethernet connectivity to the upstairs offices. (connecterd to the Cisco E1200 is a 24 port Netgear switch.)I have spent considerable time talking with Verizon and Cisco/Linksys but have not been successful in just how to set this up.A former tech actually did have this setup but for what ever reason the settings were reset to factory defaults with no written record as to the necessary settings.
Two Separate Networks On One PC?
May 1, 2011I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.
View 2 Replies View RelatedSetting Up Two Separate Networks With One Isp?
Feb 5, 2012I would like to set up two separate networks from one internet connection(modem), with the goal being to have a public network(Network A) that would have a small server on it, and then having a second secured network(Network B) that would have my personal computers on it. And both networks having connection to the internet. (The idea being that if the server somehow became compromised that my personal computers and their data would be safe)I have done some research and found that many people claim this can be done with just two or three routers, but none of them go into any detail about how to configure the routers. Below are the physical setups of the two options that I have come up with in my research, which if either would you recommend? And how would I configure each of the routers?
--------------
Modem/router 1 (Network A public)
--Internet-in WAN port
--port 1 to WAN of router 2-------------l
--port 2 server
[code]...
1 PC Accessing Two Separate Networks?
Sep 12, 2012I have two subnets at my home and both run through my Cisco router. One is my private LAN with access to the Internet, ie your standard home network. The other is a semi-public network that I share with friends through an encrypted GRE tunnel system(DMVPN) over the Internet. I have a server on that semi-public network and I can access my friend's servers from my server, but not from my main PC on my private network.
Is there a way I can access both networks from only my main pc using two nic's?
Two Separate Networks On One DSL Modem?
Mar 29, 2012how I can setup two separate networks on a Westell 327w modem/router. I know this question has been asked to death and I've utilized the search function, but I still don't know how to make this work. I have a computer that I plan on using for important business and my sibiling has my other computer that he uses for gaming and downloading stuff. His computer is connected wirelessly to the Westell 327w. My computer has no internet access at this point. I would like to have both connected wirelessly to the internet, but keep them completely separate and as secure as possible, as he downloads some questionable things.
View 1 Replies View RelatedHow To Make Two Separate Networks On One Connection
Feb 9, 2012I am trying to make 2 COMPLETELY seperate networks with only 1 internet connection. We have routers, switches and all that. But we need to know how to set it all up. there are 2 companies in the same office, each company needs their own network at which they can view eachothers files but in no way view the other networks files.
View 1 Replies View RelatedSetting Up Separate Networks With VLAN
Oct 3, 2012I'm new at this stuff and very stumped. I have one WAP with multiple SSIDs that support VLAN ID (for a private and guest wireless network) and a managed switch that supports tag or port based VLAN ID. How do I set up the switch so that the networks are separate, but can still reach their own routers to get on the Internet? In case details are necessary, the WAP is a Cisco Aironet 1130AG and the switch is a Netgear FS750T2
View 14 Replies View RelatedTwo Separate Networks On One Cable Modem
Feb 5, 2012We are a small office currently running a regular network (9 wired, 2 wireless) and also using the "guest" feature (7 wireless) on a Linksys E2000. We have a switch to connect our wired equipment to the E2000. If "A" is our regular network, and "B" is our guest network, is it possible to have 2 routers on 1 cable modem and still prevent network "A" from seeing Network "B" and vice versa?? We are looking to do this because we will soon be exceeding the maximum guest users (10) allowed by the E2000. We have another Linksys router in storage, I think it is a WRT54G, that we would use if this is possible.
View 1 Replies View RelatedHow To Connect 2 Routers - No Separate Networks
Mar 3, 2013I want to connect 2 routers like this picture.No need to have it as separate networks.
View 3 Replies View RelatedWhy Should Wireless And Wired Networks Be On Separate Subnets
Oct 24, 2011With traditional classful subnetting, the same number of host bits is used to designate the subnet ID for all the resulting subnetworks. This type of subnetting always results in a fixed number of subnets and a fixed number of hosts per subnet. For this reason, this is known as fixed-length subnetting. The decision about how many host bits to use for the subnet ID is a big planning decision. There are two considerations when planning subnets: the number of hosts on each network, and the number of individual local networks needed. The table for the subnet possibilities for the 192.168.1.0 network shows how the selection of a number of bits for the subnet ID affects both the number of possible subnets and the number of hosts that can be in each subnet. One thing to keep in mind is that in all IPv4 networks, two host addresses are reserved: the all-0s and the all-1s. An address with all 0s in the host portion of the address is an invalid host address and usually refers to the entire network or subnetwork. An address with all 1s in the host portion is used as the local network broadcast address. When a network is subnetted, each subnet contains an all-0s and an all-1s host address that cannot be used for individual host addresses.
View 2 Replies View RelatedCisco Firewall :: Keep 2 Networks Separate On ASA 5505
May 7, 20121. I currently have a Comcast Business Class Gateway, Cisco 2100 Series WLAN Controller and a Cisco ASA 5505 all connected together to supply LAN and WLAN internet connections on my network.
2. I also have a Card Access Security System on it owns network. It currently does not have internet access.
I would like to put my security system on the internet so that I can support it remotely. To do this, it has to be on a firewalled internet connection.Can I put the two networks on my ASA 5505 and keep them seperate? I don't want to provide a path into the Security System through my current LAN & WLAN. But I do need a frewalled internet connection on my Security System. I am trying to avoid purchasing a seperate firewall.
DIR 655 - Connecting Two Routers Together And Keeping Networks Separate
Jul 31, 2012I have two dir655 routers that are connected. The second router is not setup as a wireless access point, but I am open to that if it will work. The second one is going to serve as a public wifi in a business, with a separate SSID. The first one is going to handle the local business network, with its NAS and printers. How would I prevent the public wifi from accessing the first router?
I have tried the guest wifi partition setting, however it still allows access to the lan devices on the first router. It does partition with the second router properly though, but thats not worth anything to me cause there are no lan devices on the 2nd router.
Would it work right if I turn the 2nd router into a access point, disable the dhcp server, and set it up with the guest wifi partition?
Cisco Routers :: Vlans On R180W To Separate Networks?
Jan 29, 2013I have a network set up between two buildings. Each building has its own internet connection and DHCP server, building A using an RV180W router and building B using a linksys product. A WDS bridge has been set up between the two buildings using two wireless access points.The goal here is to allow clients in either building to be assigned an IP from their respective DHCP server (and thereby use that building's internet connection), yet still access network resources (eg file storage, printer, etc.) in the other building should the need arise.I have tried to set this up by having the RV180 assign IP's in the range 192.168.0.xxx to its clients in building A, and the linksys to assign IP's in the range 192.168.1.xxx in building B. I have enabled Vlan 1 and Vlan 2 on the RV180 - vlan 1 runs a DHCP server for building A. Vlan 2 runs no DHCP server and is directly connected to the WDS bridge to building B. Inter Vlan routing is enabled on both Vlan 1 and Vlan 2.On the WDS bridge modules, ive assigned both static IP's in the 192.168.1.xxx range (vlan 2 range). I've specified their dns and default gateway as 192.168.1.2 which is the static address for the RV180 in vlan 2.From a PC in vlan 1, I can ping and access the webgui for the WDS bridge modules which are in Vlan 2. However, i cannot ping any other computer in Vlan 2 which is set to accept a dynamic IP from the DHCP server operating in Building B. I assume this is because the WDS modules point to the RV180 as their default gateway and dns server, while the clients that have accepted a dynamic IP from the building B DHCP point to that device as their default gateway and DNS.I am considering trying changing the DNS and default gateway on the building B side of the WDS bridge to the building B values to see if that works, but am concerned i would lose all connectivity to the webgui from building A if i do that.
View 7 Replies View RelatedCisco Routers :: RV180W And Two Completely Separate Networks
Aug 15, 2012I'm an architect working in a small office that happens to be home to two seperate businesses, each with their owner network. However, these two networks want to use the same large format printer. I recently purchased the RV180W since the Cisco representative told me i would be able to connect both networks to the router so they can both see the printer without seeing the files on each of the other networks. We simply want to share the same printer.
Network 1:
192.168.4.1
Network 2
192.168.2.1
Large Format Printer
192.168.4.151
Network 1 has the RV180W as it's router with three gigabit switches. Computers and peripherals are connected to the three switches. 1 port open on the last switch.
I want to configure the RV180W to see both 192.168.4.1 and 192.168.2.1
What settings need to be modifed in order to accomplish this? Do I need more equipment? Is it easier to put a wireless card in one of the computers on the 192.168.2.1 network and then set it to see the 192.168.4.1 network?
Cisco Switches :: SG300 Switch 2 Separate Networks
Sep 1, 2011We have 2 separate networks here, 1 for data (192.168.0.x) and 1 for VOIP phones (192.168.3.x).
I need them to both be connected to different ports on a switch (Cisco SG 300 10 port managed switch) which is then linked to another switch (Cisco Catalyst 2960 48 port switch). Then on this 2960 switch I want the link to be split back into the 2 separate networks. I think that I need to create 2 separate VLANs and assign them to different ports.
Linksys Wireless Router :: E2000 Separate Networks On One Modem / Two Routers
Feb 27, 2012Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
I disabled the ability to change settings using wireless connection on both routers.
How To Share Files With Two Different Networks
Jul 6, 2011how to share files with two different networks, one networking is in ptcl dsl router, second is in tenda wifi router, so how to enable sharing files with these two networking
View 1 Replies View RelatedNo (Share) Tab For Networks (Windows 7)
Jan 27, 2011I can't get the connection to work between my laptop (Windows 7) and my Xbox360. I am on a college-based connection as I am away at school. I can't find the router IP or how to even go about finding it. What I've tried:
- Bridge-ing the connections, no success.
- Upgrading the drivers on the ethernet side, no success.
- Enabling "Internet Connections with ICS", no success.
How To Share A File On Different Networks
Apr 13, 2012How to share a file on different networks
View 1 Replies View RelatedUnable To Share Internet Access - Windows 7?
Mar 24, 2013I have a new Windows 7 laptop that is replacing an older XP machine that has successfully operated for a number of years with internet connection sharing from an XP desktop host computer. I am unable to set up the new machine to access the internet. The SysInfo data for the new computer is:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz, x64 Family 6 Model 42
[Code].....
The client has its IP address set automatically by the HOMENET wireless router, along with a manually set gateway address to route internet signals through the host computer rather through the router. I am new to Windows 7 and have not been able to set up the client to see or share files between the host and client when connected by wireless. When connected by a LAN connection to the router, I can see both computers and share files between them, but have not been able to connect to the internet. The Win 7 machine can connect directly to RESNET and access the internet that way but the incoming signal averages about 45% which is far below the level needed for acceptable use.
Can Devices That Share A Router Have Access To Each Others Internet History
Sep 4, 2011Can devices that share a router have access to each others internet history? Can one device affect another device that also uses the router?
View 3 Replies View RelatedRouters / Switches :: Can't Share Internet Access From Cisco Switch
Apr 15, 2011I went out and bought a linksys 5 port workgroup switch. I tried to hook my internet into it and my other computers into it , THINKING, I would be able to get internet on all. No go. I can get inter net on one, as you can tell. but all others nothing. and to make matters worse i got win 2000, win xp pro, and linux that I like to get online.. I have : renewed IP's assin Ip's refresh, purge dns. rebooted. all and rebooted in diferent orders. double checked connections, tested all lines. The network is on a rj45 ethernet .
View 1 Replies View RelatedAccess Internet Using Wireless Network And Printer Using Separate Wired Network At Time?
Apr 4, 2012I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies View RelatedTP-Link WR740N Router / Unnecessary Home Networks With No Internet Access?
Aug 3, 2012I've been having this issue for quite some time on my Windows 7 SP3 x64 machine. It's a desktop, connected via ethernet to a TP-Link WR740N router, that also provides wireless coverage. My ISP is a local one (the country is Latvia), and it offers a decent 100 MBps up/down optical fiber internet service. Now for the problem - there is only one home network on my computer, that seems to work, and that is 'Network 2'. Whenever I have to reboot the router for whatever reason, it attempts to reconnect, but sometimes reconnects to a 'Network 3' and once even to a 'Network 4' and 'Network 5'. None of these other networks have internet access. I tried to run the diagnostics tool on the issue, and usually it told me that there's a problem with the default gateway. Additionally, twice I've had the issue of the computer completely freezing when connected to one of the Internet-less networks (eg 'Network 3'), and trying to disable the network adapter, forcing a restart that consequently caused a fail boot - from there on I had to use System Restore to actually get my PC to function.
The way I've been fixing it, apart from random rebooting, reconnecting, and hoping for the best (that it decides it wants 'Network 2'), is by putting in the Resource Mini CD that came with my router, and running the Wizard for the WR740N router. It has 4 steps, the 2nd of which is 'Installing the router' (configuring the network adapter), at which point, my internet starts to work (always connects to 'Network 2'). If, I however, decide to continue this process to the step 'Configure router', and attempt to set up my wireless connection, it will begin to reset itself, and once again connect to 'Network 3', leaving me without internet access.
Linksys Wired Router :: RV016 - Allow Other Networks Connected To Firewall To Access Internet?
Nov 24, 2011I have a sonicwall firewall connected to the LAN port of the RV016 router and two DSL modems connected to the WAN ports.
Ip address allocation:
Firewall
192.168.50.9
RV016
LAN - 192.168.50.10
WAN - 192.168.60.1
WAN - 192.168.61.1
What configurations do I need to enter into the RV016 to allow other networks connected to the firewall(192.168.3.0, 192.168.2.0) to access the internet?
Access To Separate Network
Mar 27, 2013i have computer A with 2 NICs.... NIC 1 has ip 192.168.x.x which has access to internet and NIC 2 10.0.x.x which as access to server files and other docs....i have computer B with ip 192.168.x.x but want to be able to access 10.0.x.x using computer A as a router is this possible and how do i go about doing that. i was thinking about bridging NIC 1 and NIC 2 adding static route on computer A and adding a second ip 10.0.x.x to computer B NIC (i know it is possible to add 2 ips on one NIC in windows) so i can have access to the file server...is what i mention possible
View 1 Replies View RelatedSeparate Port 4 Into Separate Vlan?
Jan 16, 2013My fiance recently signed up for the Screen-wise Panel for Google research. Basically they monitor your TV usage and your internet usage. As part of the program they installed a Cisco WIFI router. I've got no issue with them logging the sites visited etc but I'm a little worried about them possible collecting private information (banking / work related stuff) that I don't want going out there. According to what I've read what's supposed to happen is they replace your router with the new Cisco router.The "technician" who came in and installed the router was actually a builder and not an IT technician and rather than replace our router he connected the Cisco router into port 4 of our router... I wasn't in at the time.
What I was looking to do is separate Port 4 of my router into a separate VLAN that can access the internet, but not access anything on ports 1-3, or the wireless. However, I want to be able to see everything on port 4 from the other side (in other words I want to see "into" the port 4 VLAN, but don't want them to see out). I also wanted DHCP to assign IP addresses correctly depending on where you were plugged in. In this example the first VLAN (your current router ip address) is going to be on 192.168.1.1, and the second VLAN (the new on we create on port 4) is going to be on 192.168.2.1.This is exactly what I'm looking to do, I could then connect the kids machines / tablets / ipods to the Cisco router and have the main machine and my work laptop on the main router... but I don't have a clue how to do it. </quote> Is this something that I am able to do with the Netgear router I own and is it hard to set up?
Separate Wifi For Internet Only?
Oct 28, 2011I have 2 wireless devices. The first is the modem itself and the wireless is setup on that with WPA and all that fun stuff. The second one is a wireless access point. I would like to have a WiFi that can access ONLY the internet. I don't want it to be able to access the local network at all. Is this possible?
View 1 Replies View RelatedCisco :: Access Separate Comcast Modem Administration Through Switch
Jun 28, 2012We have a rack with a Cisco Catalyst 3750 that is networked with other racks in the data center and uses bandwidth from the data center co-location (which is also an ISP). We had a need to install a Comcast Business Class modem in this rack and want to be able to manage this modem remotely. What I have done so far is.
View 2 Replies View RelatedUse Spare Router As Wireless Repeater / Separate Access Point?
Apr 11, 2011We just got a new replacement router at our home. We had a 2wire 2701 HG-S (we got this for free when we signed up for our DSL service) and now replaced it with a Netgear N300 Work and Play model. I want to know if we can set up the 2wire router as another access point to improve our wireless signal range. Right now we have a good signal upstairs (where the Netgear router is located), but not the best signal downstairs. I am able to run an Ethernet cord from the Netgear router downstairs to the 2wire if necessary, if it will improve our WiFi signal. Both of these routers are router/modem combos that include the DSL modem, in addition to wireless access point btw. Is this even possible to do? Would it require me to install a custom firmware onto the 2wire router?
View 10 Replies View Related